Circular Polarization Modulation for Digital Communication Systems

Conventional approaches of digital modulation schemes make use of amplitude, frequency and/or phase as modulation characteristic to transmit data. In this paper, we exploit circular polarization (CP) of the propagating electromagnetic carrier as modulation attribute which is a novel concept in digital communications. The requirement of antenna alignment to maximize received power is eliminated for CP signals and these are not affected by linearly polarized jamming signals. The work presents the concept of Circular Polarization Modulation for 2, 4 and 8 states of carrier and refers them as binary circular polarization modulation (BCPM), quaternary circular polarization modulation (QCPM) and 8-state circular polarization modulation (8CPM) respectively. Issues of modulation, demodulation, 3D symbol constellations and 3D propagating waveforms for the proposed modulation schemes are presented and analyzed in the presence of channel effects, and they are shown to have the same bit error performance in the presence of AWGN compared with conventional schemes while provide 3dB gain in the flat Rayleigh fading channel.

Rural realities: digital communication challenges for rural Australian local governments

Purpose – This article explores challenges for rural Australian local governments during the transition to high-speed broadband infrastructure. Despite the National Broadband Network’s promised ubiquitous connectivity, significant access discrepancies remain between rural and urban areas.Methodology – Empirical findings are drawn from a full-day workshop on digital connectivity, which included participants from seven rural local governments in New South Wales, Australia. Thematic analysis of the workshop transcript was undertaken in order to extrapolate recurring nuances of rural digital exclusion. Findings – Rural communities face inequitable prospects for digital inclusion, and authorities confront dual issues of accommodating connected and unconnected citizens. Many areas have no or poor broadband access, and different digital engagement expectations are held by citizens and local governments. Citizens seek interactive opportunities, but rural authorities often lack the necessary resources to offer advanced participatory practices. Research limitations/implications – While this research draws from a small sample of government officials, their insights are nonetheless heuristically valuable in identifying connectivity issues faced in rural Australia. These issues can guide further research into other regions as well as civic experiences of digital inclusion. Practical/social implications – There is a need to reconceive Australia’s current policy approach to broadband. Greater rural digital inclusion may be achieved by focusing on connectivity as a public interest goal, targeting infrastructure developments to suit local contexts, and implementing participatory digital government practices. Originality/value – The actions suggested would help ensure equity of digital inclusion across Australian municipal areas. Without such changes, there is a risk of rural citizens facing further marginalisation through digital exclusion.

A Unitary Approach to Information and Estimation Theory in Digital Communication Systems

This thesis presents the outcomes of a Ph.D. course in telecommunications engineering. It is focused on the optimization of the physical layer of digital communication systems and it provides innovations for both multi- and single-carrier systems. For the former type we have first addressed the problem of the capacity in presence of several nuisances. Moreover, we have extended the concept of Single Frequency Network to the satellite scenario, and then we have introduced a novel concept in subcarrier data mapping, resulting in a very low PAPR of the OFDM signal. For single carrier systems we have proposed a method to optimize constellation design in presence of a strong distortion, such as the non linear distortion provided by satellites' on board high power amplifier, then we developed a method to calculate the bit/symbol error rate related to a given constellation, achieving an improved accuracy with respect to the traditional Union Bound with no additional complexity. Finally we have designed a low complexity SNR estimator, which saves one-half of multiplication with respect to the ML estimator, and it has similar estimation accuracy.

Moving Beyond Hastiness and Superficiality: Being an Ethical Technical Communicator via Digital Communication Technologies in Health Care

This thesis examines digital technologies used by technical communicators in healthcare settings. I show that technical communicators, who function as users, advocators and evaluators, need a useable framework for ethical engagement with digital technologies, which integrally affect the physician-patient relationship. Therefore, I apply rhetorical methodology by producing useable knowledge and phenomenological methodology by examining lived experiences of technical communicators. Substantiation comes from theories spanning technical communication, philosophy, and composition studies. Evidence also emerges from qualitative interviews with communication professionals working in healthcare; my concerns arise from personal experiences with electronic recordkeeping in the exam room. This thesis anticipates challenging the presumed theory-practice divide while encouraging greater disciplinary reciprocity. Because technical communication infuses theory into productive capacity, this thesis presents the tripartite summons of the ethical technical communicator: to exercise critically-reflective action that safeguards the physician-patient relationship by ways of using digital technologies, advocating for audiences, and evaluating digital technologies.

Automatic control of attenuation in a digital communication network

This thesis describes the investigation of an adaptive method of attenuation control for digital speech signals in an analogue-digital environment and its effects on the transmission performance of a national telecommunication network. The first part gives the design of a digital automatic gain control, able to operate upon a P.C.M. signal in its companded form and whose operation is based upon the counting of peaks of the digital speech signal above certain threshold levels. A study was ma.de of a digital automatic gain control (d.a.g.c.) in open-loop configuration and closed-loop configuration. The former was adopted as the means for carrying out the automatic control of attenuation. It was simulated and tested, both objectively and subjectively. The final part is the assessment of the effects on telephone connections of a d.a.g.c. that introduces gains of 6 dB or 12 dB. This work used a Telephone Connection Assessment Model developed at The University of Aston in Birmingham. The subjective tests showed that the d.a.g.c. gives advantage for listeners when the speech level is very low. The benefit is not great when speech is only a little quieter than preferred. The assessment showed that, when a standard British Telecom earphone is used, insertion of gain is desirable if speech voltage across the earphone terminals is below an upper limit of -38 dBV. People commented upon the presence of an adaptive-like effect during the tests. This could be the reason why they voted against the insertion of gain at level only little quieter than preferred, when they may otherwise have judged it to be desirable. A telephone connection with a d.a.g.c. in has a degree of difficulty less than half of that without it. The score Excellent plus Good is 10-30% greater.

Digital communication networks incorporating mobile data terminals

The use of digital communication systems is increasing very rapidly. This is due to lower system implementation cost compared to analogue transmission and at the same time, the ease with which several types of data sources (data, digitised speech and video, etc.) can be mixed. The emergence of packet broadcast techniques as an efficient type of multiplexing, especially with the use of contention random multiple access protocols, has led to a wide-spread application of these distributed access protocols in local area networks (LANs) and a further extension of them to radio and mobile radio communication applications. In this research, a proposal for a modified version of the distributed access contention protocol which uses the packet broadcast switching technique has been achieved. The carrier sense multiple access with collision avoidance (CSMA/CA) is found to be the most appropriate protocol which has the ability to satisfy equally the operational requirements for local area networks as well as for radio and mobile radio applications. The suggested version of the protocol is designed in a way in which all desirable features of its precedents is maintained. However, all the shortcomings are eliminated and additional features have been added to strengthen its ability to work with radio and mobile radio channels. Operational performance evaluation of the protocol has been carried out for the two types of non-persistent and slotted non-persistent, through mathematical and simulation modelling of the protocol. The results obtained from the two modelling procedures validate the accuracy of both methods, which compares favourably with its precedent protocol CSMA/CD (with collision detection). A further extension of the protocol operation has been suggested to operate with multichannel systems. Two multichannel systems based on the CSMA/CA protocol for medium access are therefore proposed. These are; the dynamic multichannel system, which is based on two types of channel selection, the random choice (RC) and the idle choice (IC), and the sequential multichannel system. The latter has been proposed in order to supress the effect of the hidden terminal, which always represents a major problem with the usage of the contention random multiple access protocols with radio and mobile radio channels. Verification of their operation performance evaluation has been carried out using mathematical modelling for the dynamic system. However, simulation modelling has been chosen for the sequential system. Both systems are found to improve system operation and fault tolerance when compared to single channel operation.

Grid and Simulation of Digital Communication Systems

The purpose of this paper is to turn researchers' attention to the use of grid computing for simulating digital communications and its large potential for decreasing significantly the duration of the experiments and for improving the statistical representativeness and reliability of the obtained results.

Writing online:a guide to effective digital communication at work

Online writing plays a complex and increasingly prominent role in the life of organizations. From newsletters to press releases, social media marketing and advertising, to virtual presentations and interactions via e-mail and instant messaging, digital writing intertwines and affects the day-to-day running of the company - yet we rarely pay enough attention to it. Typing on the screen can become particularly problematic because digital text-based communication increases the opportunities for misunderstanding: it lacks the direct audio-visual contact and the norms and conventions that would normally help people to understand each other. Providing a clear, convincing and approachable discussion, this book addresses arenas of online writing: virtual teamwork, instant messaging, emails, corporate communication channels, and social media. Instead of offering do and don’t lists, however, it teaches the reader to develop a practice that is observant, reflective, and grounded in the understanding of the basic principles of language and communication. Through real-life examples and case studies, it helps the reader to notice previously unnoticed small details, question previously unchallenged assumptions and practices, and become a competent digital communicator in a wide range of professional contexts.

A stakeholder perspective on heritage branding and digital communication

How does an archaeological museum understand its function in a digital environment? Consumer expectations are rapidly shifting, from what used to be a passive relationship with exhibition contents, towards a different one, in which interaction, individuality and proactivity define the visitor experience. This consumer paradigm is much studied in fast moving markets, where it provokes immediately measurable impacts. In other fields, such as tourism and regional development, the very heterogeneous nature of the product to be branded makes it near to impossible for only one player to engage successfully. This systemic feature implies that museums, acting as major stakeholders, often anchor a regional brand around which SME tend to cluster, and thus assume responsibilities in constructing marketable identities. As such, the archaeological element becomes a very useful trademark. On the other hand, it also emerges erratically on the Internet, in personal blogs, commercial websites, and social networks. This forces museums to enter as a mediator, authenticating contents and providing credibility. What might be called the digital pull factor poses specific challenges to museum management: what is to be promoted, and how, in order to create and maintain a coherent presence in social media? The underlying issue this paper tries to address is how museums perceive their current and future role in digital communication.

Digital design communication : measuring learner technological prowess and self-efficacy in problem resolution

Currently the Bachelor of Design is the generic degree offered to the four disciplines of Architecture, Landscape Architecture, Industrial Design, and Interior Design within the School of Design at the Queensland University of Technology. Regardless of discipline, Digital Communication is a core unit taken by the 600 first year students entering the Bachelor of Design degree. Within the design disciplines the communication of the designer's intentions is achieved primarily through the use of graphic images, with written information being considered as supportive or secondary. As such, Digital Communication attempts to educate learners in the fundamentals of this graphic design communication, using a generic digital or software tool. Past iterations of the unit have not acknowledged the subtle difference in design communication of the different design disciplines involved, and has used a single generic software tool. Following a review of the unit in 2008, it was decided that a single generic software tool was no longer entirely sufficient. This decision was based on the recognition that there was an increasing emergence of discipline specific digital tools, and an expressed student desire and apparent aptitude to learn these discipline specific tools. As a result the unit was reconstructed in 2009 to offer both discipline specific and generic software instruction, if elected by the student. This paper, apart from offering the general context and pedagogy of the existing and restructured units, will more importantly offer research data that validates the changes made to the unit. Most significant of this new data is the results of surveys that authenticate actual student aptitude versus desire in learning discipline specific tools. This is done through an exposure of student self efficacy in problem resolution and technological prowess - generally and specifically within the unit. More traditional means of validation is also presented that includes the results of the generic university-wide Learning Experience Survey of the unit, as well as a comparison between the assessment results of the restructured unit versus the previous year.

Introduction: business communication in the digital age – fresh perspectives

Digital Business Discourse offers a distinctively language- and discourse-centered approach to digitally mediated business and professional communication, providing a timely and comprehensive assessment of the current digital communication practices of today's organisations and workplaces. It is the first dedicated publication to address how computer-mediated communication technologies affect institutional discourse practices, bringing together scholarship from a range of disciplinary backgrounds, including organisational and management studies, rhetorical and communication studies, communication training and discourse analysis. Covering a wide spectrum of communication technologies, such as email, instant messaging, message boards, Twitter, corporate blogs and consumer reviews, the chapters gather research drawing on empirical data from real professional contexts. In this way, the book contributes to both academic scholarship and business communication training, enabling researchers, trainers and practitioners to deepen their understanding of the impact of new communication technologies on professional and corporate communication practices.