Potential utilization ways of recovered chemical products from digestate

The study evaluates the potential application of chemical substances, obtained from biogas plants` by-products. Through the anaerobic digestion process with biogas the large amount of digestate is produced. This digestate mainly consists on the organic matter with the high concentration of nutrients such as nitrogen and phosphorus. During ammonia stripping and phosphorus precipitation the products- ammonia water, ammonium sulfate, ammonium nitrate, ferrous phosphate, aluminum phosphate, calcium phosphate and struvite can be recovered. These chemicals have potential application in different industrial sectors. According to Finnish market and chemicals properties, the most perspective industrial applications were determined. Based on the data, obtained through the literature review and market study, the ammonia water was recognized as a most perspective recovered substances. According to interview provided among Finnish companies, ammonia water is used for flue gas treatment in SNCR technology. This application has a large scale in the framework of Finnish industrial sectors. As well nitrogen with phosphorous can be used as a source of nutrients in the biological wastewater treatment plants of paper mills.

Nitrogen and carbon dynamics in grassland soils and plants after application of digestate

A better understanding of effects after digestate application on plant community, soil microbial community as well as nutrient and carbon dynamics is crucial for a sustainable grassland management and the prevention of species and functional diversity loss. The specific research objectives of the thesis were: (i) to investigate effects after digestate application on grass species and soil microbial community, especially focussing on nitrogen dynamic in the plant-soil system and to examine the suitability of the digestate from the “integrated generation of solid fuel and biogas from biomass” (IFBB) system as fertilizer (Chapter 3). (ii) to investigate the relationship between plant community and functionality of soil microbial community of extensively managed meadows, taking into account temporal variations during the vegetation period and abiotic soil conditions (Chapter 4). (iii) to investigate the suitability of IFBB-concept implementation as grassland conservation measure for meadows and possible associated effects of IFBB digestate application on plant and soil microbial community as well as soil microbial substrate utilization and catabolic evenness (Chapter 5). Taken together the results indicate that the digestate generated during the IFBB process stands out from digestates of conventional whole crop digestion on the basis of higher nitrogen use efficiency and that it is useful for increasing harvestable biomass and the nitrogen content of the biomass, especially of L. perenne, which is a common species of intensively used grasslands. Further, a medium application rate of IFBB digestate (50% of nitrogen removed with harvested biomass, corresponding to 30 50 kg N ha-1 a-1) may be a possibility for conservation management of different meadows without changing the functional above- and belowground characteristic of the grasslands, thereby offering an ecologically worthwhile alternative to mulching. Overall, the soil microbial biomass and catabolic performance under planted soil was marginally affected by digestate application but rather by soil properties and partly by grassland species and legume occurrence. The investigated extensively managed meadows revealed a high soil catabolic evenness, which was resilient to medium IFBB application rate after a three-year period of application.

Risk of Leaching in Soils Amended by Compost and digestate from Municipal Solid Waste

New European directives have proposed the direct application of compost and digestate produced from municipal solid wastes as organic matter sources in agricultural soils. Therefore information about phosphorus leaching from these residues when they are applied to the soil is increasingly mportant. Leaching experiments were conducted to determine the P mobility in compost and digestate mixtures, supplying equivalent amounts to 100 kg P ha?1 to three different types of soils. The tests were performed in accordance with CEN/TS 14405:2004 analyzing the maximum dissolved reactive P and the kinetic rate in the leachate. P biowaste fractionation indicated that digestate has a higher level of available P than compost has. In contrast, P losses in leaching experiments with soil-compost mixtureswere higher than in soil-digestate mixtures. For bothwastes, therewas no correlation between disolved reactive P lost and the water soluble P.The interaction between soil and waste, the long experimentation time, and the volume of leachate obtained caused the waste?s wettability to become an influential parameter in P leaching behavior. The overall conclusion is that kinetic data analysis provides valuable information concerning the sorption mechanism that can be used for predicting the large-scale behavior of soil systems.

Combustion of fuel blends containing digestate pyrolysis oil in a multi-cylinder compression ignition engine

Digestate from the anaerobic digestion conversion process is widely used as a farm land fertiliser. This study proposes an alternative use as a source of energy. Dried digestate was pyrolysed and the resulting oil was blended with waste cooking oil and butanol (10, 20 and 30 vol.%). The physical and chemical properties of the pyrolysis oil blends were measured and compared with pure fossil diesel and waste cooking oil. The blends were tested in a multi-cylinder indirect injection compression ignition engine.Engine combustion, exhaust gas emissions and performance parameters were measured and compared with pure fossil diesel operation. The ASTM copper corrosion values for 20% and 30% pyrolysis blends were 2c, compared to 1b for fossil diesel. The kinematic viscosities of the blends at 40 C were 5–7 times higher than that of fossil diesel. Digested pyrolysis oil blends produced lower in-cylinder peak pressures than fossil diesel and waste cooking oil operation. The maximum heat release rates of the blends were approximately 8% higher than with fossil diesel. The ignition delay periods of the blends were higher; pyrolysis oil blends started to combust late and once combustion started burnt quicker than fossil diesel. The total burning duration of the 20% and 30% blends were decreased by 12% and 3% compared to fossil diesel. At full engine load, the brake thermal efficiencies of the blends were decreased by about 3–7% when compared to fossil diesel. The pyrolysis blends gave lower smoke levels; at full engine load, smoke level of the 20% blend was 44% lower than fossil diesel. In comparison to fossil diesel and at full load, the brake specific fuel consumption (wt.) of the 30% and 20% blends were approximately 32% and 15% higher. At full engine load, the CO emission of the 20% and 30% blends were decreased by 39% and 66% with respect to the fossil diesel. Blends CO2 emissions were similar to that of fossil diesel; at full engine load, 30% blend produced approximately 5% higher CO2 emission than fossil diesel. The study concludes that on the basis of short term engine experiment up to 30% blend of pyrolysis oil from digestate of arable crops can be used in a compression ignition engine.

Otimização da produção de biogás com recurso a redes neuronais artificiais

Numa Estação de Tratamento de Águas Residuais (ETAR), são elevados os custos não só de tratamento das águas residuais como também de manutenção dos equipamentos lá existentes, nesse sentido procura-se utilizar processos capazes de transformar os resíduos em produtos úteis. A Digestão Anaeróbia (DA) é um processo atualmente disponível capaz de contribuir para a redução da poluição ambiental e ao mesmo tempo de valorizar os subprodutos gerados. Durante o processo de DA é produzido um gás, o biogás, que pode ser utilizado como fonte de energia, reduzindo assim a dependência energética da ETAR e a emissão de gases com efeito de estufa para a atmosfera. A otimização do processo de DA das lamas é essencial para o aumento da produção de biogás, mas a complexidade do processo constitui um obstáculo à sua otimização. Neste trabalho, aplicaram-se Redes Neuronais Artificiais (RNA) ao processo de DA de lamas de ETAR. RNA são modelos simplificados inspirados no funcionamento das células neuronais humanas e que adquirem conhecimento através da experiência. Quando a RNA é criada e treinada, produz valores de output aproximadamente corretos para os inputs fornecidos. Foi esse o motivo para recorrer a RNA na otimização da produção de biogás no digestor I da ETAR Norte da SIMRIA, usando o programa NeuralToolsTM da PalisadeTM para desenvolvimento das RNA. Para tal, efetuou-se uma análise e tratamento de dados referentes aos últimos quatro anos de funcionamento do digestor. Os resultados obtidos permitiram concluir que as RNA modeladas apresentam boa capacidade de generalização do processo de DA. Considera-se que este caso de estudo é promissor, fornecendo uma boa base para o desenvolvimento de modelos eventualmente mais gerais de RNA que, aplicado conjuntamente com as características de funcionamento de um digestor e o processo de DA, permitirá otimizar a produção de biogás em ETAR.

Use of swine waste-derived biogas to enhance microalgae productivity.

The effects of swine wastewater-derived biogas on microalgae productivity were determined. Experiments were conducted in a closed photobioreactor containing digestate effluent as culturing media and biogas in the headspaceas source of CO2. Experiments were carried out under mixothrophic and autothrophic conditions. Results showed that autotrophic growth rate (0.6 d-1)was twofoldfaster than mixotrophic. Frequent reinjections of biogas containing up to 2,000 ppm of hydrogen sulfide was not inhibitory to microalgae growth. The rapid removal of H2S in the system suggests photobioreactors can be an interesting alternative to biogas purification. A model to estimate microalgae productivity based on the amount of available CO2, inorganic and organic carbon was developedand showed good data fit correlation (r²= 0.99).

Determination of microalgae cellular composition after phycoremediation of swine wastewaters.

Phycoremediation of swine wastewaters has been widely reported as an attractive tertiary treatment system, that effectively removes the excessive nutrient loadswhilst offering a valuable source of feedstock biomass. Digestate from an upflow anaerobic sludge blanket (UASB, 6%v/v) and a nitrification reactor (NR; 50% v/v) were used as culturing media to microalgae. Experiments were carried out in lab scale photobioreactors (PBRs) using a consortia of Chlorella and Scenedesmus. Ammonia (44 to 90%) and phosphorus (77%) were efficiently removed from both effluents tested after 4 days. Microalgae biomass harvested from the UASB effluent showed 57, 34 and 1% of proteins, carbohydrates and lipids, respectively. Comparatively, the cellular composition of microalgae grown on NR effluent had lower protein (43%) but higher carbohydrate (42%) contents. Negligible difference in lipid fraction was observed independently of the effluents tested. The results suggest that the biomass harvested from phycoremediation of swine wastewaters can offer a valuable protein and carbohydrate feedstock for nutritional and biotechnological applications.

Energy from waste (EfW): a feasibility study on the economic and the environmental co-benefits of biogas production within rural communities

Energy from waste (E/W) technologies in the form o f biogas plants, CHP plants and other municipal solid waste (MSW) conversion technologies, have been gaining steady ground in the provision o f energy throughout Europe and the UK. Urban Waste Water Treatment Plants (UWWTP) are utilising much o f the same biochemical processes common to these E/W plants. Previous studies on Centralised Anaerobic Digestion (CAD) within Ireland found that the legislative and economic conditions were not conducive to such an operation on the grounds o f low energy price for electric and heat energy, and due to the restrictive nature o f the allowable feedstocks. Recent changes to the Irish REFIT tariff on energy produced from Anaerobic digestion; alterations to the regulation o f the allowable use o f animal by products(ABP); the recent enactment o f the Renewable Energy D irective (09/28/EC) and a subsequent review o f the draft Biowaste Directive (2001) required that the issue o f decentralised energy production in Ireland be reassessed. In this instance the feasibility study is based on a extant rural community, centred around the village o f Woodford Co Galway. The review found that the prevailing conditions were now such that it was technically and economically feasible for this biochemical process to provide energy and waste treatment facilities at the above location. The review also outlines the last item which is preventing this process from becoming achievable, specifically the lack o f a digestate regulation on land spreading which deals specifically with biowaste. The study finds that the implementation o f the draft EU biowaste regulations, with amendments for Cr and Hg levels to match the proposed Irish regulation for compost, would ensure that Ireland has some o f the most restrictive regulations in Europe for this application. The delay in completing this piece o f legislation is preventing national energy and waste issues from being resolved in a planned and stepwise fashion. A proposed lay out for the new Integrated Waste from Energy Plant (IW/EP) is presented. Budget economic projections and alternative revenue streams are outlined. Finally a review o f the national policies regarding the Rural Development Plan (RDP), the Rural Planning Guidelines (RPG) and the National Renewable Energy Action Plan (NREAP) are examined against the relevant EU directives.

Mädätysjäännöksen tuotteistamismahdollisuudet Kymenlaaksossa

Biokaasun tuotantoa ollaan selvästi lisäämässä Suomessa. Biokaasutuksen kokonaishyödyn kannalta on olennaista, että mädätyksen lopputuote eli mädätysjäännös saadaan lannoitekäyttöön. Tämän työn tavoitteena oli selvittää Kymenlaakson Jäte Oy:n mahdollisuuksia tuotteis-taa Kymen Bioenergia Oy:n yhteismädätyslaitoksen mädätysjäännöstä. Työssä keskityttiin hyötykäyttövaihtoehdoista lannoitekäyttöön maanviljelyssä sekä tilanteeseen jossa mädätyslaitos käsittelee sekä puhdistamolietettä että biojätettä ja mädätysjäännös kuivataan mekaanisesti. Mekaanisesti kuivatun mädätysjäännöksen ensisijaiset tuotteistamisvaihtoehdot maanviljelyyn ovat joko jäännös sellaisenaan tai termisesti kuivattuna ja rakeistettuna, eli kuivarakeena. Mäkikylän laitoksen mädätysjäännöksen arvo peltolannoitteena on syyskuun 2010 keinolannoit-teiden hintaan vertaamalla sellaisenaan noin 1–20 €/t ja kuivarakeena noin 2–60 €/t. Arvo riippuu siitä, miten tuotteiden typpeä ja fosforia huomioidaan kasveille käyttökelpoiseksi. Täl-lä hetkellä käyttökelpoisin tapa on ympäristötuen puhdistamolietetuotteita koskevien ehtojen mukaisesti ottaa huomioon vesiliukoinen typpi ja 40 % kokonaisfosforista. Tällöin mädätys-jäännöksen arvo on noin 6 €/t ja kuivarakeen n. 18 €/t. Käytön kannalta kuivarae on helpompi vaihtoehto ja alueen viljelijät ovat heille tehdyn kyselyn mukaan varsin kiinnostuneita kuivarakeesta lannoitteena. Muista tuotteistusvaihtoehdoista termisesti kuivaamalla mädätysjäännöksen tehollinen lämpö-arvo saapumistilassa on noin 10 MJ/kg. Vastaava arvo jyrsinturpeen kesäkuun 2010 hinnan mukaan on noin 30 €/t. Tuotteen soveltuvuus polttoon tulee silti varmistaa. Termisesti kuiva-tulla mädätysjäännöksellä on tuotteistamismahdollisuuksia hieman laajemmin kuin kompostoidulla. Kompostoidun mädätysjäännöksen tuotteistamisen lähtökohta on lähinnä viherrakentaminen. Maanviljelykäyttöä ajatellen mädätysjäännöstä ei välttämättä tarvitse kompostoida.

Mädätysjäännöksen rakeistus, terminen kuivaus ja energiahyötykäyttö

Tutkimuksen tavoitteena oli kartoittaa alueellisen jäteyhtiön Kymenlaakson Jäte Oy:n mahdollisuuksia rakeistaa ja termisesti kuivata mekaanisesti kuivattua mädätysjäännöstä sekä mahdollisuuksia toimittaa termisesti kuivattua materiaalia energiahyötykäyttöön. Tutkimuksessa selvitettiin myös kokemuksia lattialämmityksen käyttämisestä mädätysjäännöksen kuivaukseen. Tutkimuksessa perehdyttiin erilaisiin rakeistus- ja kuivausmenetelmiin sekä termisen kuivurin valintaan vaikuttaviin asioihin. Kuvaukset perustuvat kirjallisuudesta ja internetistä saatuihin tietoihin. Tekniikkakuvausten pohjalta lähdettiin kyselemään tarjouksia termisiä kuivauslaitteistoja myyviltä yrityksiltä. Tarjoukset pyydettiin kuiva-ainepitoisuuden muutokselle 30 %:sta 90 %:iin ja oletettiin, että kuivaukseen on käytettävissä lämpöä viideltä kaatopaikkakaasua käyttävältä mikroturbiinilta. Tutkimuksen aikana saatiin tarjous kuudelta yritykseltä. Saadut tarjoukset esiteltiin tiivistetysti raportissa ja kokonaisuudessaan ne sisällytettiin Kymenlaakson Jäte Oy:n laajempaan raporttiin, joka ei ole julkinen. Yritykset antoivat hyvin erilaisia tietoja siitä, mitä tarjoukseen sisältyy, joten tarjoukset eivät olleet suoraan vertailukelpoisia. Tarjouksista myös havaittiin, että jos Mäkikylän biokaasulaitokselta vastaanotettaisiin enimmäismäärä (19 500 t/a) mädätysjäännöstä, mikroturbiineilta saatava lämpömäärä ei riittäisi kuivaamaan kaikkea mädätysjäännöstä 90 % kuiva-ainepitoisuuteen. Tutkimuksen aikana huomattiin myös, että sitovan tarjouksen saamiseksi mädätysjäännös tulee toimittaa testattavaksi, jolloin saadaan vahvistus kuivausmenetelmän soveltuvuudesta kyseiselle materiaalille. Tutkimuksessa selvitettiin myös, minkälaisia kokemuksia löytyy lattialämmityksen käyttämisestä kuivaukseen niin Suomesta kuin maailmalta ja voiko menetelmää käyttää mädätysjäännöksen kuivaukseen. Kyseistä menetelmää on käytetty tehostamaan aurinkokuivausta, joten tutkimuksen aikana perehdyttiin erityisesti aurinkokuivaukseen liittyviin tieteellisiin artikkeleihin. Lattialämmityksen käytöstä löytyi niin heikkouksia kuin vahvuuksia. Suomessa aurinkokuivauksen ja lattialämmityksen yhdistelmä ei ole kuitenkaan päätynyt laajaan käyttöön ja syynä voidaan nähdä muun muassa kylmät ja pimeät vuodenajat sekä suuri pinta-alan tarve. Tutkimusraportissa selvitettiin lisäksi polttolaitosten edustajien kiinnostusta ja rajoituksia ottaa vastaan termisesti kuivattua mädätysjäännöstä. Tutkimuksen aikana otettiin yhteyttä alle 100 km etäisyydellä Kymenlaakson Jäte Oy:stä sijaitsevien jätteenpolttoluvan omaavien yritysten edustajiin. Saatuja vastauksia käsiteltiin tiivistetysti raportissa ja vastaukset sisällytettiin kokonaisuudessaan Kymenlaakson Jäte Oy:n laajempaan raporttiin, joka ei ole julkinen. Puhelinhaastattelujen pohjalta nähtiin, että yrityksillä on kiinnostusta materiaalia kohtaan, mutta samalla vastauksiin vaikuttavat mädätysjäännöksen analyysitulokset. Poltto-ominaisuuksiin liittyvät analyysit tullaan toteuttamaan vuoden 2012 aikana. Laitoksilla oli myös vaihtelevia rajoituksia materiaalia kohtaan, mutta analyysituloksista riippuen materiaalia voidaan hyödyntää energiana tuhansia tai jopa kymmeniä tuhansia tonneja vuodessa alle 100 km etäisyydellä Kymenlaakson Jäte Oy:stä.

Biogas production in regional integrated biodegradable waste treatment – Possibilities for improving energy performance and reducing GHG emissions

The greatest threat that the biodegradable waste causes on the environment is the methane produced in landfills by the decomposition of this waste. The Landfill Directive (1999/31/EC) aims to reduce the landfilling of biodegradable waste. In Finland, 31% of biodegradable municipal waste ended up into landfills in 2012. The pressure of reducing disposing into landfills is greatly increased by the forthcoming landfill ban on biodegradable waste in Finland. There is a need to discuss the need for increasing the utilization of biodegradable waste in regional renewable energy production to utilize the waste in a way that allows the best possibilities to reduce GHG emissions. The objectives of the thesis are: (1) to find important factors affecting renewable energy recovery possibilities from biodegradable waste, (2) to determine the main factors affecting the GHG balance of biogas production system and how to improve it and (3) to find ways to define energy performance of biogas production systems and what affects it. According to the thesis, the most important factors affecting the regional renewable energy possibilities from biodegradable waste are: the amount of available feedstock, properties of feedstock, selected utilization technologies, demand of energy and material products and the economic situation of utilizing the feedstocks. The biogas production by anaerobic digestion was seen as the main technology for utilizing biodegradable waste in agriculturally dense areas. The main reason for this is that manure was seen as the main feedstock, and it can be best utilized with anaerobic digestion, which can produce renewable energy while maintaining the spreading of nutrients on arable land. Biogas plants should be located close to the heat demand that would be enough to receive the produced heat also in the summer months and located close to the agricultural area where the digestate could be utilized. Another option for biogas use is to upgrade it to biomethane, which would require a location close to the natural gas grid. The most attractive masses for biogas production are municipal and industrial biodegradable waste because of gate fees the plant receives from them can provide over 80% of the income. On the other hand, directing gate fee masses for small-scale biogas plants could make dispersed biogas production more economical. In addition, the combustion of dry agricultural waste such as straw would provide a greater energy amount than utilizing them by anaerobic digestion. The complete energy performance assessment of biogas production system requires the use of more than one system boundary. These can then be used in calculating output–input ratios of biogas production, biogas plant, biogas utilization and biogas production system, which can be used to analyze different parts of the biogas production chain. At the moment, it is difficult to compare different biogas plants since there is a wide variation of definitions for energy performance of biogas production. A more consistent way of analyzing energy performance would allow comparing biogas plants with each other and other recovery systems and finding possible locations for further improvement. Both from the GHG emission balance and energy performance point of view, the energy consumption at the biogas plant was the most significant factor. Renewable energy use to fulfil the parasitic energy demand at the plant would be the most efficient way to reduce the GHG emissions at the plant. The GHG emission reductions could be increased by upgrading biogas to biomethane and displacing natural gas or petrol use in cars when compared to biogas CHP production. The emission reductions from displacing mineral fertilizers with digestate were seen less significant, and the greater N2O emissions from spreading digestate might surpass the emission reductions from displacing mineral fertilizers.

Potential for Greenhouse Gas Emission Reductions by Using Biomethane as a Road Transportation Fuel

The aim of this thesis is to study whether the use of biomethane as a transportation fuel is reasonable from climate change perspective. In order to identify potentials and challenges for the reduction of greenhouse gas (GHG) emissions, this dissertation focuses on GHG emission comparisons, on feasibility studies and on the effects of various calculation methodologies. The GHG emissions calculations are carried out by using life cycle assessment (LCA) methodologies. The aim of these LCA studies is to figure out the key parameters affecting the GHG emission saving potential of biomethane production and use and to give recommendations related to methodological choices. The feasibility studies are also carried out from the life cycle perspective by dividing the biomethane production chain for various operators along the life cycle of biomethane in order to recognize economic bottlenecks. Biomethane use in the transportation sector leads to GHG emission reductions compared to fossil transportation fuels in most cases. In addition, electricity and heat production from landfill gas, biogas or biomethane leads to GHG reductions as well. Electricity production for electric vehicles is also a potential route to direct biogas or biomethane energy to transportation sector. However, various factors along the life cycle of biomethane affect the GHG reduction potentials. Furthermore, the methodological selections have significant effects on the results. From economic perspective, there are factors related to different operators along the life cycle of biomethane, which are not encouraging biomethane use in the transportation sector. To minimize the greenhouse gas emissions from the life cycle of biomethane, waste feedstock should be preferred. In addition, energy consumption, methane leakages, digestate utilization and the current use of feedstock or biogas are also key factors. To increase the use of biomethane in the transportation sector, political steering is needed to improve the feasibility for the operators. From methodological perspective, it is important to recognize the aim of the life cycle assessment study. The life cycle assessment studies can be divided into two categories: 1.) To produce average GHG information of biomethane to evaluate the acceptability of biomethane use compared to fossil transportation fuels. 2.) To produce GHG information of biomethane related to actual decision-making situations. This helps to figure out the actual GHG emission changes in cases when feedstock, biogas or biomethane are already in other use. For example directing biogas from electricity production to transportation use does not necessarily lead to additional GHG emission reductions. The use of biomethane seems to have a lot of potential for the reduction of greenhouse gas emissions as a transportation fuel. However, there are various aspects related to production processes, to the current use of feedstock or biogas and to the feasibility that have to be taken into account.

Naudanlanta biokaasulaitosraaka-aineena, käsittely ja logistiikka

Maatalouden lietelannasta saatavien ravinteiden talteenotto ja kierrätys ovat viime aikoina nousseet yhä tärkeämmäksi tavoitteeksi. Ravinteiden tehokas kierrätystapa saadaan ai-kaiseksi käsittelemällä lietelantaa. Lannan käsittelyketjuja on monenlaisia; tässä työssä naudan lannan käsittelyketju muodostuu separoinnista ja mädätyksestä. Tämän diplomityön tarkoituksena oli selvittää naudan lannan mekaanisen separoinnin ja logistiikan kannattavuus märkämädätys- ja kuivamädätyskäsittelyketjussa. Käsittelyketju-jen kannattavuus tai kannattamattomuus on esitetty eri skenaarioissa muodostettujen kus-tannuslaskentojen perusteella. Skenaarioiden kustannuslaskelmat ovat toisiinsa verratta-vissa, jolloin ne voidaan asettaa niin ikään paremmuusjärjestykseen. Viides skenaario ei ole suoraan verrattavissa muihin skenaarioihin, koska siinä lannankäsittelyketjua on tar-kasteltu eri näkökulmasta, keskittämällä suurimmalle maatilalle. Mekaanisista separaattoreista tarkasteltiin työssä ruuvipuristinta, dekantterilinkoa ja ul-koistettua separointipalvelua. Lannan logistiikkakustannuksissa huomioitiin lannan kulje-tusta traktori- ja säiliöautolla tai traktorilla. Separoinnin kustannus liitettiin osaksi logis-tiikkakustannusta. Työn tuloksien perusteella voidaan todeta dekantterilingon separointi-kustannuksen olevan taloudellisesti kannattamattomin johtuen pienestä lantakapasiteetista ja separaattorin korkeasta investointihinnasta. Ravinteiden osalta linko osoittautui tehok-kaimmaksi menetelmäksi erottamaan ravinteet eri jakeisiin. Lannan käsittely separointipalvelulla oli edullisin skenaario, jonka vuosittaiseksi kustan-nukseksi saatiin säiliö- ja kuorma-autolla lantaa kuljetettaessa 58 700 € ja traktorilla kul-jetettaessa 60 400 €. Kallein lannan käsittely oli dekantterilingolla, jonka vuosittaiseksi kustannukseksi saatiin lantaa säiliö- ja kuorma-autolla kuljetettaessa 121 000 € ja trakto-rilla kuljetettaessa 123 300 €. Lannan separointi maatilalla osoittautui kannattavammaksi kuin käsittelemättömän lietteen kuljetus biokaasulaitokselle.

Potential of energy and nutrient recovery from biodegradable waste by co-treatment in Lithuania

Biodegradable waste quantities in Lithuania and their potential for the co-treatment in renewable energy and organic fertilizer production are investigated. Two scenarios are formulated to study the differences of the amounts of obtainable energy and fertilizers between different ways of utilization. In the first scenario, only digestion is used, and in the second scenario, other materials than straw are digested, and straw and the solid fraction of sewage sludge digestate are combusted. As a result, the amounts of heat and electricity, as well as the fertilizer amounts in the counties are obtained for both scenarios. Based on this study, the share of renewable energy in Lithuania could be doubled by the co-treatment of different biodegradable materials.

A Study of Single Stage Semi‐Dry Anaerobic Digestion of Organic Fraction of Municipal Solid Waste

Solid waste generation is a natural consequence of human activity and is increasing along with population growth, urbanization and industrialization. Improper disposal of the huge amount of solid waste seriously affects the environment and contributes to climate change by the release of greenhouse gases. Practicing anaerobic digestion (AD) for the organic fraction of municipal solid waste (OFMSW) can reduce emissions to environment and thereby alleviate the environmental problems together with production of biogas, an energy source, and digestate, a soil amendment. The amenability of substrate for biogasification varies from substrate to substrate and different environmental and operating conditions such as pH, temperature, type and quality of substrate, mixing, retention time etc. Therefore, the purpose of this research work is to develop feasible semi-dry anaerobic digestion process for the treatment of OFMSW from Kerala, India for potential energy recovery and sustainable waste management. This study was carried out in three phases in order to reach the research purpose. In the first phase, batch study of anaerobic digestion of OFMSW was carried out for 100 days at 32°C (mesophilic digestion) for varying substrate concentrations. The aim of this study was to obtain the optimal conditions for biogas production using response surface methodology (RSM). The parameters studied were initial pH, substrate concentration and total organic carbon (TOC). The experimental results showed that the linear model terms of initial pH and substrate concentration and the quadratic model terms of the substrate concentration and TOC had significant individual effect (p < 0.05) on biogas yield. However, there was no interactive effect between these variables (p > 0.05). The optimum conditions for maximizing the biogas yield were a substrate concentration of 99 g/l, an initial pH of 6.5 and TOC of 20.32 g/l. AD of OFMSW with optimized substrate concentration of 99 g/l [Total Solid (TS)-10.5%] is a semi-dry digestion system .Under the optimized condition, the maximum biogas yield was 53.4 L/kg VS (volatile solid).. In the second phase, semi-dry anaerobic digestion of organic solid wastes was conducted for 45 days in a lab-scale batch experiment for substrate concentration of 100 g/l (TS-11.2%) for investigating the start-up performances under thermophilic condition (50°C). The performance of the reactor was evaluated by measuring the daily biogas production and calculating the degradation of total solids and the total volatile solids. The biogas yield at the end of the digestion was 52.9 L/kg VS for the substrate concentration of 100 g/l. About 66.7% of volatile solid degradation was obtained during the digestion. A first order model based on the availability of substrate as the limiting factor was used to perform the kinetic studies of batch anaerobic digestion system. The value of reaction rate constant, k, obtained was 0.0249 day-1. A laboratory bench scale reactor with a capacity of 36.8 litres was designed and fabricated to carry out the continuous anaerobic digestion of OFMSW in the third phase. The purpose of this study was to evaluate the performance of the digester at total solid concentration of 12% (semi-dry) under mesophlic condition (32°C). The digester was operated with different organic loading rates (OLRs) and constant retention time. The performance of the reactor was evaluated using parameters such as pH, volatile fatty acid (VFA), alkalinity, chemical oxygen demand (COD), TOC and ammonia-N as well as biogas yield. During the reactor’s start-up period, the process is stable and there is no inhibition occurred and the average biogas production was 14.7 L/day. The reactor was fed in continuous mode with different OLRs (3.1,4.2 and 5.65 kg VS/m3/d) at constant retention time of 30 days. The highest volatile solid degradation of 65.9%, with specific biogas production of 368 L/kg VS fed was achieved with OLR of 3.1 kg VS/m3/d. Modelling and simulation of anaerobic digestion of OFMSW in continuous operation is done using adapted Anaerobic Digestion Model No 1 (ADM1).The proposed model, which has 34 dynamic state variables, considers both biochemical and physicochemical processes and contains several inhibition factors including three gas components. The number of processes considered is 28. The model is implemented in Matlab® version 7.11.0.584(R2010b). The model based on adapted ADM1 was tested to simulate the behaviour of a bioreactor for the mesophilic anaerobic digestion of OFMSW at OLR of 3.1 kg VS/m3/d. ADM1 showed acceptable simulating results.