Rôle des informations proprioceptives dans l’équilibre à la marche chez les personnes en santé et hémiparétiques

L'utilisation des informations proprioceptives pour le contrôle de l’équilibre à la marche est encore mal comprise chez les sujets en santé ou hémiparétiques suite à un accident vasculaire cérébral. Le but de cette étude était d’évaluer le rôle des informations proprioceptives dans le maintien de l'équilibre à la marche chez les patients en santé et hémiparétiques. Une analyse de mouvement en trois dimensions a été faite chez treize participants en santé et six hémiparétiques qui marchaient sur un tapis roulant instrumenté pour déterminer leur difficulté à maintenir l’équilibre postural et dynamique, évaluée respectivement par les forces stabilisante et déstabilisante. Des vibrations étaient appliquées en continu ou pendant la phase d’appui sur les muscles postérieurs du cou et sur le triceps sural du côté non-dominant/parétique. La vibration continue ou à l’appui du triceps sural a diminué, chez les sujets en santé, la difficulté à maintenir l’équilibre dynamique et postural (p< 0,01), avec une position du corps plus en arrière, sans changement des paramètres temporels de marche. L'équilibre et les paramètres temporels de la marche n'étaient pas modifiés significativement par la vibration à la nuque (p>.17). Aucun effet des vibrations n'a été mesuré chez les patients hémiparétiques (p> 0,45). Les informations proprioceptives sont donc bien utilisées lors de la marche, mais leur rôle dépendrait des conditions de marche et des afférences visuelles disponibles. Un changement dans les capacités d’intégration expliquerait l'absence d'effet des vibrations chez les patients hémiparétiques. D’autres études sont nécessaires pour comprendre l’intégration des informations proprioceptives et visuelles dans le contrôle de l’équilibre à la marche.

Étude du contrôle postural quasi-statique et dynamique en position debout des personnes ayant une lésion médullaire incomplète.

L’atteinte sensorimotrice découlant d’une lésion médullaire traumatique affecte la capacité à se tenir debout de façon sécuritaire. Chez les individus ayant une lésion médullaire incomplète, les chutes lors des tâches locomotrices sont fréquentes après la réadaptation, entraînant des blessures qui affectent la participation sociale et la qualité de vie. Une meilleure compréhension du contrôle postural en clinique aiderait à cibler des interventions efficaces à ce niveau. L’objectif général de cette thèse était donc d’étudier le contrôle postural debout lors de tâches variées chez les personnes avec lésion médullaire traumatique en utilisant une approche biomécanique. Les objectifs spécifiques étaient d’étudier divers aspects du contrôle postural en lien avec chacune des tâches et d’identifier les variables prédictives de la stabilité. Vingt-cinq (25) personnes ayant une lésion médullaire traumatique incomplète ont été recrutées. Elles ont été évaluées au laboratoire d’analyse de mouvement lors du maintien de la station debout quasi-statique yeux ouverts et fermés, de l’exécution d’un test des limites de stabilité multidirectionnelles, de la marche naturelle et de l’initiation et l’arrêt de la marche. Des mesures biomécaniques caractérisant le déplacement du centre de pression (COP) ainsi que le modèle du contrôle postural dynamique des forces stabilisantes et déstabilisantes ont été utilisés pour comparer le contrôle postural des patients à celui d’un groupe formé de 33 personnes en santé. Les résultats ont montré une diminution du contrôle postural quasi-statique et dynamique chez les personnes ayant une lésion médullaire comparativement aux personnes en santé. Cette diminution s’accompagnait d’une contribution élevée des informations visuelles à la station debout quasi-statique qui était associée au score du mini BESTest. Le déplacement du COP lors du test des limites de stabilité multidirectionnelle se caractérisait par une difficulté à suivre la direction indiquée. Ce manque de précision causait une augmentation du trajet nécessaire pour atteindre la distance maximale dans chacune des directions. Les résultats au maintien de la station debout quasi-statique et au test des limites de stabilité multidirectionnelle n’étaient pas corrélés. La phase unipodale de la marche des personnes ayant une lésion médullaire différait de celle des personnes en santé par une force stabilisante maximale moindre et une force déstabilisante plus grande alors que l’arrêt de la marche se révélait plus instable que l’initiation de la marche chez les personnes ayant une lésion médullaire. Pour l’ensemble des tâches de marche, la vitesse du COM et la distance entre le COP et la base de support étaient les facteurs explicatifs principaux des forces stabilisantes et déstabilisantes. En somme, les résultats confirment l’impression clinique d’une atteinte générale du contrôle postural debout des personnes ayant une lésion médullaire; ils en précisent les caractéristiques et ciblent les paramètres à considérer dans la rééducation.

The impact of buy to let residential investment on local housing markets: evidence from Glasgow, Scotland

The advent of the 'buy to let' (BTL) phenomenon in the UK. apart from producing a new wave of individualized rental market investment, has been widely judged to be a speculative and destabilizing force in the housing market. This paper provides a detailed empirical investigation of new residential investment in one city (Glasgow) where BTL has made a relatively large impact. In seeking to overcome data problems, the study employed qualitative (expert interviews and a landlord survey) and quantitative methods (census, the Register of Sasines, standardized house price information and modelling thereof) in order to assess the nature and scale of BTL, the motivations of investors and its impact on the private housing market. The evidence suggests that white Glasgow is in many re.spects different to rental markets elsewhere in the UK and although the investment has thus far largely occurred in a benign environment, the context for future investment, on balance, looks sustainable (i.e.favourable changes to pension planning law and the maturing market for BTL}. Long-term market impact is an empirical question that depends on the specific interactions of market niches or segments (i.e. the first-time buyer market for apartments} with potential buy to let investment. Our conclusion, to borrow a Scottish legal term, is that BTL induced volatility is 'not proven'.

"An attentive Ear, a watchful Eye, and a Calm judicious Pen": William Samuel Johnson, the Colonial Agents, and the Transformation of the British Atlantic World

By looking at Great Britain and the American colonies in conjunction with the larger British Atlantic Empire, historians can better understand the political, social, and cultural transformations that occurred when transatlantic actors met. William Samuel Johnson is an example of an "ordinary" agent who nonetheless had extensive contacts with numerous British and American thinkers. While acting on Connecticut's behalf in London between 1767 and 1771, he sent reports back to Connecticut governors Jonathan Trumbull and William Pitkin on parliamentary proceedings while corresponding with the people who traveled around the Atlantic world during this critical period-merchants, seafarers, emigrants, soldiers, missionaries, radicals and conservatives, reformers, and politicians. He is also representative of the late eighteenth-century empire writ large. Agents, who had once been a source of stability in the far-flung colonies, became a destabilizing force as confusion and conflict grew over conceptual ideas of what constituted "the empire" and who was included in it. Johnson was a sane observer in the midst of the ideological and administrative upheaval of the 1760's and 1770's. His subsequent loyalism and political obscurity during the war years was in many ways a result of his attempts to reconcile various factional interests during his tenure as an agent. Although he did his best to resolve these divisions and provide an accurate account of the powerful nationalistic forces gathering on both sides of the Atlantic on the eve of the American Revolution, the agents' collective failures as transatlantic mediators helped bring about the collapse of an imperial community. This disintegration had dramatic effects on the whole of the Atlantic world.

Relationship Between Orofacial Function, Dentofacial Morphology, And Bite Force In Young Subjects.

The aim was to evaluate the relationship between orofacial function, dentofacial morphology, and bite force in young subjects. Three hundred and sixteen subjects were divided according to dentition stage (early, intermediate, and late mixed and permanent dentition). Orofacial function was screened using the Nordic Orofacial Test-Screening (NOT-S). Orthodontic treatment need, bite force, lateral and frontal craniofacial dimensions and presence of sleep bruxism were also assessed. The results were submitted to descriptive statistics, normality and correlation tests, analysis of variance, and multiple linear regression to test the relationship between NOT-S scores and the studied independent variables. The variance of NOT-S scores between groups was not significant. The evaluation of the variables that significantly contributed to NOT-S scores variation showed that age and presence of bruxism related to higher NOT-S total scores, while the increase in overbite measurement and presence of closed lip posture related to lower scores. Bite force did not show a significant relationship with scores of orofacial dysfunction. No significant correlations between craniofacial dimensions and NOT-S scores were observed. Age and sleep bruxism were related to higher NOT-S scores, while the increase in overbite measurement and closed lip posture contributed to lower scores of orofacial dysfunction.

Bipolar Tribocharging Signal During Friction Force Fluctuations At Metal-insulator Interfaces.

Friction and triboelectrification of materials show a strong correlation during sliding contacts. Friction force fluctuations are always accompanied by two tribocharging events at metal-insulator [e.g., polytetrafluoroethylene (PTFE)] interfaces: injection of charged species from the metal into PTFE followed by the flow of charges from PTFE to the metal surface. Adhesion maps that were obtained by atomic force microscopy (AFM) show that the region of contact increases the pull-off force from 10 to 150 nN, reflecting on a resilient electrostatic adhesion between PTFE and the metallic surface. The reported results suggest that friction and triboelectrification have a common origin that must be associated with the occurrence of strong electrostatic interactions at the interface.

Retention force of T-bar clasps for titanium and cobalt-chromium removable partial dentures

The objective of this study was to evaluate the retention force of T-bar clasps made from commercially pure titanium (CP Ti) and cobalt-chromium (Co-Cr) alloy by the insertion/removal test simulating 5 years use. Thirty-six frameworks were cast from CP Ti (n=18) and Co-Cr alloy (n=18) with identical prefabricated patterns on refractory casts from a distal extension mandibular hemi-arch segment. The castings were made on a vacuum-pressure machine, under vacuum and argon atmosphere. Each group was subdivided in three, corresponding to 0.25 mm, 0.50 mm and 0.75 mm undercuts, respectively. No polishing procedures were performed to ensure uniformity. The specimens were subjected to an insertion/removal test and data was analyzed statistically to compare CP Ti and Co-Cr alloy in the same undercut (Student's t-test for independent samples) and each material in different undercuts (one-way ANOVA) (p=0.05). Comparisons between materials revealed significant differences (p=0.017) only for the 0.50-mm undercut. No significant differences (p>0.05) were found when comparing the same material for the undercuts. It may be concluded that for different undercuts, both Co-Cr alloy and CP Ti had no significant differences for T-bar clasps; CP Ti showed the lowest retention force values when compared to Co-Cr alloy in each undercut, but with significant difference only for the 0.50-mm undercut; and both materials maintained the retentive capacity during the simulation test.

Bite force in temporomandibular dysfunction (TMD) and healthy complete denture wearers

The signs and symptoms of temporomandibular dysfunction (TMD) may contribute to reduce bite force and muscular activity. The aims of this study were to compare bite force in complete denture wearers with TMD (TMD group) and without TMD (healthy group).The TMD group consisted of 9 individuals, who had worn a maxillary and a mandibular complete removable denture for more than 10 years. The healthy group consisted of 9 participants who wore dentures and had satisfactory interocclusal and maxillomandibular relationship. Helkimo Index was used to analyze the dysfunction level. Maximum bite force was measured using a digital dynamometer with capacity of 100 kgf and adapted to oral conditions.The TMD group presented smaller mean bite force values than the healthy group, though without statistical significance (p>0.05). This outcome suggests that the TMD signs and symptoms and the structural conditions of the dentures did not affect the maximal bite force of complete denture wearers.

Do synergies improve accuracy? A study of speed-accuracy trade-offs during finger force production

We explored possible effects of negative covariation among finger forces in multifinger accurate force production tasks on the classical Fitts's speed-accuracy trade-off. Healthy subjects performed cyclic force changes between pairs of targets ""as quickly and accurately as possible."" Tasks with two force amplitudes and six ratics of force amplitude to target size were performed by each of the four fingers of the right hand and four finger combinations. There was a close to linear relation between movement time and the log-transformed ratio of target amplitude to target size across all finger combinations. There was a close to linear relation between standard deviation of force amplitude and movement time. There were no differences between the performance of either of the two ""radial"" fingers (index and middle) and the multifinger tasks. The ""ulnar"" fingers (little and ring) showed higher indices of variability and longer movement times as compared with both ""radial"" fingers and multifinger combinations. We conclude that potential effects of the negative covariation and also of the task-sharing across a set of fingers are counterbalanced by an increase in individual finger force variability in multifinger tasks as compared with single-finger tasks. The results speak in favor of a feed-forward model of multifinger synergies. They corroborate a hypothesis that multifinger synergies are created not to improve overall accuracy, but to allow the system larger flexibility, for example to deal with unexpected perturbations and concomitant tasks.

Tooth Movement Activates the Central Amygdala and the Lateral Hypothalamus by the Magnitude of the Force Applied

Objective: To determine if the magnitude of the force used to induce incisor tooth movement promotes distinct activation in cells in the central amygdala (CEA) and lateral hypothalamus (LH) of rats. Also, the effect of morphine on Fos immunoreactivity (Fos-IR) was investigated in these nuclei. Materials and Methods: Adult male rats were anesthetized and divided into six groups: only anesthetized (control), without orthodontic appliance (OA), OA but without force, OA activated with 30g or 70g, OA with 70g in animals pretreated with morphine (2 mg/kg, intraperitoneal). Three hours after the onset of the experiment the rats were reanesthetized and perfused with 4% paraformaldehyde. The brains were removed and fixed, and sections containing CEA and LH were processed for Fos protein immunohistochemistry. Results: The results show that in the control group, the intramuscular injection of a ketamine/xylazine mixture did not induce Fos-IR cells in the CEA or in the LH. Again, the without force group showed a little Fos-IR. However, in the 70g group the Fos-IR was the biggest observed (P < .05, Tukey) in the CEA and LH compared with the other groups. In the 30g group, the Fos-IR did not differ from the control group, the without OA group, and the without force group. Furthermore, pretreatment with morphine in the 70g group reduced Fos-IR in these regions. Conclusions: Tooth movement promotes Fos-IR in the CEA and LH according to the magnitude of the force applied. (Angle Orthod. 2010;80:111-115.)

Relationship Between Surface Topography and Energy Density Distribution of Er,Cr:YSGG Beam on Irradiated Dentin: An Atomic Force Microscopy Study

Objective: The aim of this study was to assess by atomic force microscopy (AFM) the effect of Er,Cr:YSGG laser application on the surface microtopography of radicular dentin. Background: Lasers have been used for various purposes in dentistry, where they are clinically effective when used in an appropriate manner. The Er, Cr: YSGG laser can be used for caries prevention when settings are below the ablation threshold. Materials and Methods: Four specimens of bovine dentin were irradiated using an Er, Cr:YSGG laser (lambda = 2.78 mu m), at a repetition rate of 20 Hz, with a 750-mu m-diameter sapphire tip and energy density of 2.8 J/cm(2) (12.5 mJ/pulse). After irradiation, surface topography was analyzed by AFM using a Si probe in tapping mode. Quantitative and qualitative information concerning the arithmetic average roughness (Ra) and power spectral density analyses were obtained from central, intermediate, and peripheral areas of laser pulses and compared with data from nonirradiated samples. Results: Dentin Ra for different areas were as follows: central, 261.26 (+/- 21.65) nm; intermediate, 83.48 (+/- 6.34) nm; peripheral, 45.8 (+/- 13.47) nm; and nonirradiated, 35.18 (+/- 2.9) nm. The central region of laser pulses presented higher ablation of intertubular dentin, with about 340-760 nm height, while intermediate, peripheral, and nonirradiated regions presented no difference in height of peritubular and interperitubular dentin. Conclusion: According to these results, we can assume that even when used at a low-energy density parameter, Er, Cr: YSGG laser can significantly alter the microtopography of radicular dentin, which is an important characteristic to be considered when laser is used for clinical applications.

Novel method for measuring nanofriction by atomic force microscope

The authors describe a novel approach to the measurement of nanofriction, and demonstrate the application of the method by measurement of the coefficient of friction for diamondlike carbon (DLC) on DLC, Si on DLC, and Si on Si surfaces. The technique employs an atomic force microscope in a mode in which the tip moves only in the z (vertical) direction and the sample surface is sloped. As the tip moves vertically on the sloped surface, lateral tip slipping occurs, allowing the cantilever vertical deflection and the frictional (lateral) force to be monitored as a function of tip vertical deflection. The advantage of the approach is that cantilever calibration to obtain its spring constants is not necessary. Using this method, the authors have measured friction coefficients, for load range 0 < L M 6 mu N, of 0.047 +/- 0.002 for Si on Si, 0.0173 +/- 0.0009 for Si on DLC, and 0.0080 +/- 0.0005 for DLC on DLC. For load range 9 < L < 13 mu N, the DLC on DLC coefficient of friction increased to 0.051 +/- 0.003. (C) 2008 American Vacuum Society.

The force, power, and energy of the 100 meter sprint

At the 2008 Summer Olympics in Beijing, Usain Bolt broke the world record for the 100 m sprint. Just one year later, at the 2009 World Championships in Athletics in Berlin he broke it again. A few months after Beijing, Eriksen [Am. J. Phys. 77, 224-228 (2009)] studied Bolt's performance and predicted that Bolt could have run about one-tenth of a second faster, which was confirmed in Berlin. In this paper we extend the analysis of Eriksen to model Bolt's velocity time dependence for the Beijing 2008 and Berlin 2009 records. We deduce the maximum force, the maximum power, and the total mechanical energy produced by Bolt in both races. Surprisingly, we conclude that all of these values were smaller in 2009 than in 2008.

Cooperative scattering and radiation pressure force in dense atomic clouds

Atomic clouds prepared in ""timed Dicke"" states, i.e. states where the phase of the oscillating atomic dipole moments linearly varies along one direction of space, are efficient sources of superradiant light emission [Scully et al., Phys. Rev. Lett. 96, 010501 (2006)]. Here, we show that, in contrast to previous assertions, timed Dicke states are not the states automatically generated by incident laser light. In reality, the atoms act back on the driving field because of the finite refraction of the cloud. This leads to nonuniform phase shifts, which, at higher optical densities, dramatically alter the cooperative scattering properties, as we show by explicit calculation of macroscopic observables, such as the radiation pressure force.

Observation of a Cooperative Radiation Force in the Presence of Disorder

Cooperative scattering of light by an extended object such as an atomic ensemble or a dielectric sphere is fundamentally different from scattering from many pointlike scatterers such as single atoms. Homogeneous distributions tend to scatter cooperatively, whereas fluctuations of the density distribution increase the disorder and suppress cooperativity. In an atomic cloud, the amount of disorder can be tuned via the optical thickness, and its role can be studied via the radiation force exerted by the light on the atomic cloud. Monitoring cold (87)Rb atoms released from a magneto-optical trap, we present the first experimental signatures of radiation force reduction due to cooperative scattering. The results are in agreement with an analytical expression interpolating between the disorder and the cooperativity-dominated regimes.