Hydrostaattisen kuormituselementin parametrien vaikutus tehontarpeeseen

Työssä tutkitaan paperiteollisuuden käyttämän taipumakompensoidun telan hydrostaattisen kuormituselementin parametrien vaikutusta tehontarpeeseen ja kuormituselementin käyttäytymistä eri parametreilla. Työssä käsitellään hydrostaattisen kuormituselementin FE-laskennassa käytetyn mallinosien rakentaminen, kokoonpano ja teoria. Lisäksi analyyttinen laskenta esitetään lyhyesti. FE-laskennassa käytetään virtaus-rakenne -vuorovaikutusanalyysiä. Laskenta suoritetaan ANSYS/Flotran ohjelmistolla (versio 5.5). Hydrostaattisen kuormituselementin tehontarpeen vähentämiseen löytyi kolme tekijää. Suurimpana yksittäisenä tekijänä on elementin kitkapinta-alan pienentäminen, jolla saavutetaan 44 % kitkatehontarpeen pieneneminen. Seuraavaksi eniten vaikuttaa kitkatehontarpeeseen kuormituselementin muotoilu, jolla saavutetaan 20 % kitkatehontarpeen pieneneminen. Kolmantena tekijänä on viskositeetin pienentäminen, jolla suurimmillaan saavutetaan 15 % kitkatehontarpeen pieneneminen.

Lujitemuovisen kaavinterän kannatinpalkin suunnittelu

Diplomityössä perehdytään lujitemuovikomposiitteihin sekä niiden valmistusmenetelmiin. Tavoitteena on kehittää lujitemuovinen paperikoneen kaavinterän kannatinpalkkirakenne. Suunniteltavalla tuotteella pyritään korvaamaan perinteisesti teräksestä valmistetut paperikoneiden kaavinterän pidikepalkit paremmin tarkoitukseen sopivalla lujitemuovisella rakenteella sekä parantamaan jo tuotannossa olevan tuotteen ominaisuuksia. Työssä selvitetään tuotteen vaatimukset, joiden pohjalta laaditaan tuotteen vaatimusprofiili ja suoritetaan materiaalinvalinta perustuen ominaisarvovertailuihin. Suunnitteluosiossa tutkitaan eri rakenneratkaisujen soveltuvuutta kohteeseen. Tutkimustulosten perusteella saatiin kattava kuva eri materiaalien soveltuvuudesta kohteeseen sekä kehitettiin rakenneratkaisu, joka täyttää tuotteelta vaaditut ominaisuudet. Tutkimustulosten pohjalta syntyi myös uuden tyyppinen rakenne jolla saavutetaan huomattavaa tilansäästöä perinteisiin rakenneratkaisuihin nähden. Tämän rakenneratkaisun kehitystyötä on tarkoitus jatkaa.

Failure analysis of belt/roll tribological pair used for the production of eucalypt fiber panels

The premature failure of a large agglomeration machine used for the annual production of 360,000 m(3) of eucalypt fiber panels was investigated to identify the nucleation and growth mechanisms of cracking in PH stainless steel belts (126 m x 2.9 m x 3.0 mm). These belts are used to compress a cushion composed of eucalyptus fibers and glue, being the pressure transmitted from the pistons by the action of numerous case-hardening steel rolls. Examination of the belt working interfaces (belt/rolls and belt/eucalypt fibers) indicated that the main cracking was nucleated on the belt/roll interface and that there is a clear relationship between the crack nucleation and the presence of superficial irregularities, which were observed on the belt/roll working surface. Used rolls showed the presence of perimetric wear marks and 2 mu m silicon-rich encrusted particles (identified as silicon carbide). Lubricant residues contained the presence of helicoidal wires, which were originated by the release of the stainless steel cleaning brush bristles, and 15 mu m diameter metallic particles, which were generated by material detachment of the belt. The presence of foreign particles on the tribological interface contributed to an increase of the shear stresses at the surfaces and, consequently, the number of the contact fatigue crack nucleation sites in the belt/roll tribo-interface. The cracking was originated on the belt/roll interface of the stainless steel belt by a mixed rolling/slip contact fatigue mechanism, which promoted spalling and further nucleation and growth of conventional fatigue cracks. Finally, the system lubrication efficiency and the cleaning procedure should be optimised in order to increase the life expectancy of the belt. (c) 2006 Elsevier Ltd. All rights reserved.

Review of Contact and Dynamic Phenomena in Cold Roll Forming

This review reflects the state of the art in study of contact and dynamic phenomena occurring in cold roll forming. The importance of taking these phenomena into account is determined by significant machine time and tooling costs spent on worn out forming rolls replacement and equipment adjustment in cold roll forming. Predictive modelling of the tool wear caused by contact and dynamic phenomena can reduce the production losses in this technological process.

A segmentation-based and partial-volume-compensated method for an accurate measurement of lateral ventricular volumes on T-1-weighted magnetic resonance images

Lateral ventricular volumes based on segmented brain MR images can be significantly underestimated if partial volume effects are not considered. This is because a group of voxels in the neighborhood of lateral ventricles is often mis-classified as gray matter voxels due to partial volume effects. This group of voxels is actually a mixture of ventricular cerebro-spinal fluid and the white matter and therefore, a portion of it should be included as part of the lateral ventricular structure. In this note, we describe an automated method for the measurement of lateral ventricular volumes on segmented brain MR images. Image segmentation was carried in combination of intensity correction and thresholding. The method is featured with a procedure for addressing mis-classified voxels in the surrounding of lateral ventricles. A detailed analysis showed that lateral ventricular volumes could be underestimated by 10 to 30% depending upon the size of the lateral ventricular structure, if mis-classified voxels were not included. Validation of the method was done through comparison with the averaged manually traced volumes. Finally, the merit of the method is demonstrated in the evaluation of the rate of lateral ventricular enlargement. (C) 2001 Elsevier Science Inc. All rights reserved.

Compression Efficiency Analysis of Wyner-Ziv Video Coding with Motion Compensated Side Information Interpolation

The Wyner-Ziv video coding (WZVC) rate distortion performance is highly dependent on the quality of the side information, an estimation of the original frame, created at the decoder. This paper, characterizes the WZVC efficiency when motion compensated frame interpolation (MCFI) techniques are used to generate the side information, a difficult problem in WZVC especially because the decoder only has available some reference decoded frames. The proposed WZVC compression efficiency rate model relates the power spectral of the estimation error to the accuracy of the MCFI motion field. Then, some interesting conclusions may be derived related to the impact of the motion field smoothness and the correlation to the true motion trajectories on the compression performance.

Hypoprothrombinemia in the compensated form of hepatosplenic schistosomiasis: further studies

Coagulation abnormality is frequently observed in schistosomiasis patients but its pathophysiology has not been established. We measured, by immunodiffusion. the prothrombin-antigen concentration in 56 individuals; of these 19 with demonstrated compensated form of hepatosplenic schistosomiasis, 17 with cirrhosis and 20 were control subjects. Transaminases, albumin, transthyretin, prothrombin time, antithrombin III, factor VII, and fibrinogen were also evaluated. All parameters were altered in the cirrhotic group but only albumin, prothrombin and antithrombin III levels were altered in the schistosomiasis group. Ninety percent of the patients with cirrhosis and sixty percent of the patients with schistosomiasis had abnormal plasma levels of albumin, transthyretin, prothrombin-antigen, and/or antithrombin III; an impaired hepatic synthesis was responsible for these results. Conversely forty percent of the schistosomiasis patients with normal plasma concentrations of both albumin and transthyretin had decreased mean plasma levels of both prothrombin and antithrombin III. These results suggest that either proth rombin and antithrombin III are more sensitive markers of impaired hepatic synthesis in schistosomiasis than are levels of albumin and transthyretin combined, or a low grade chronic consumption of clotting proteins also occurs. Considering the latter hypothesis it is possible that the thrombin formed would be inhibited by antithrombin III with the complexed thrombin-antithrombin III being cleared by the liver. Consequently the plasma levels of both prothrombin and antithrombin would be decreased, but the level of fibrinogen would be preserved.

BiYacc: Roll your parser and reflective printer into one

In: A. Cunha, E. Kindler (eds.): Proceedings of the Fourth International Workshop on Bidirectional Transformations (Bx 2015), L’Aquila, Italy, July 24, 2015, published at http://ceur-ws.org

Termos psicopatológicos em bandas e músicas de rock and roll

OBJETIVO: Investigar o uso de termos psicopatológicos nos nomes de bandas de rock and roll e em suas músicas. MÉTODO: Termos psicopatológicos do glossário do DSM-IV foram digitados em português e inglês na página do YouTube. Bandas e músicas de rock and roll foram identificadas. O mesmo procedimento foi realizado, a título de comparação, com o glossário de termos neurológicos da CID-10. RESULTADOS: Foram encontrados nomes de bandas ou músicas referentes a 62 termos psiquiátricos e a 24 termos neurológicos. Os termos psiquiátricos foram mais frequentes, apresentando diferença estatisticamente significativa. Foram encontradas 60 bandas de rock com nomes inspirados na psiquiatria e na neurologia. Dessas, 44 bandas usavam nomes psiquiátricos e 16 bandas usavam termos neurológicos. Bandas e músicas de rock usam mais nomes psiquiátricos que neurológicos. Predominaram nas músicas nomes relacionados ao uso de substâncias. Ao se compararem nomes de bandas e canções brasileiras e estrangeiras, não se encontrou diferença estatisticamente significativa. CONCLUSÃO: Bandas de rock and roll usam com maior frequência termos psicopatológicos em seus nomes e em suas músicas. Bandas brasileiras apresentam resultados semelhantes.

Hirschsprung's disease: the "Swiss roll" technique revisited.

PURPOSE: During pull-through for Hirschsprung's disease (HSCR), the assessment of innervation is mainly based on the presence of ganglion cells when conventional Hematoxylin and Eosin (HE) staining is used. In hypoganglionosis, the evaluation is difficult. We adapted a standardized methodology for the examination of resected bowel after HSCR surgery, using the technique described by Moolenbeek on rodent intestine and later by Meier-Ruge in children. We have analysed the entire innervation of surgically resected bowels and compared the results with the follow up of patients. METHODS: Three longitudinal strips of colon were harvested from the mesenteric, anti-mesenteric and intermediate part in the whole length of resected colon of six patients with HSCR. Each strip was divided into two parts. One of the contiguous strips was assessed with HE and Hematoxylin-Phloxin-Safran, and the other one with acetylcholinesterase (AChE) histochemistry. We analyzed the distribution of ganglion cells and nerve arrangement along the strips with both techniques and compared the results obtained in the three different regions of the bowel. RESULTS: There was no significant difference in the pattern of innervation circumferentially. There was a correlation between a progressive increase of AChE activity and nerve hypertrophy and a decrease of ganglion cells from the proximal to the distal part of the resected colon in the submucosa and the myenteric plexus. Nerve hypertrophy and AChE-positive reaction in the mucosa were found at the resection border in patients who presented postoperative complications. CONCLUSIONS: Simultaneous assessment of nerve cells, nerve fibers and AChE activity is important in the evaluation of the innervation of the bowel segment proximal to the aganglionic zone. The method described is feasible and can be adapted to older children and adults with larger bowels. These results point out the importance of assessing nerve fibers in intraoperative biopsies during pull-through procedures to prevent uncomplete surgical bowel resection.

A Motion compensated filtering approach to remove sunlight flicker in shallow water images

A common problem in video surveys in very shallow waters is the presence of strong light fluctuations, due to sun light refraction. Refracted sunlight casts fast moving patterns, which can significantly degrade the quality of the acquired data. Motivated by the growing need to improve the quality of shallow water imagery, we propose a method to remove sunlight patterns in video sequences. The method exploits the fact that video sequences allow several observations of the same area of the sea floor, over time. It is based on computing the image difference between a given reference frame and the temporal median of a registered set of neighboring images. A key observation is that this difference will have two components with separable spectral content. One is related to the illumination field (lower spatial frequencies) and the other to the registration error (higher frequencies). The illumination field, recovered by lowpass filtering, is used to correct the reference image. In addition to removing the sunflickering patterns, an important advantage of the approach is the ability to preserve the sharpness in corrected image, even in the presence of registration inaccuracies. The effectiveness of the method is illustrated in image sets acquired under strong camera motion containing non-rigid benthic structures. The results testify the good performance and generality of the approach