Exploring the Potential Impacts of Climate Variability on Spring Wheat Yield with the APSIM Decision Support Tool

Assessing the impacts of climate variability on agricultural productivity at regional, national or global scale is essential for defining adaptation and mitigation strategies. We explore in this study the potential changes in spring wheat yields at Swift Current and Melfort, Canada, for different sowing windows under projected climate scenarios (i.e., the representative concentration pathways, RCP4.5 and RCP8.5). First, the APSIM model was calibrated and evaluated at the study sites using data from long term experimental field plots. Then, the impacts of change in sowing dates on final yield were assessed over the 2030-2099 period with a 1990-2009 baseline period of observed yield data, assuming that other crop management practices remained unchanged. Results showed that the performance of APSIM was quite satisfactory with an index of agreement of 0.80, R2 of 0.54, and mean absolute error (MAE) and root mean square error (RMSE) of 529 kg/ha and 1023 kg/ha, respectively (MAE = 476 kg/ha and RMSE = 684 kg/ha in calibration phase). Under the projected climate conditions, a general trend in yield loss was observed regardless of the sowing window, with a range from -24 to -94 depending on the site and the RCP, and noticeable losses during the 2060s and beyond (increasing CO2 effects being excluded). Smallest yield losses obtained through earlier possible sowing date (i.e., mid-April) under the projected future climate suggested that this option might be explored for mitigating possible adverse impacts of climate variability. Our findings could therefore serve as a basis for using APSIM as a decision support tool for adaptation/mitigation options under potential climate variability within Western Canada.

Environmental and aesthetic impacts of small docks and piers, workshop report: Developing a science-based decision support tool for small dock management, phase 1: Status of the science

Few issues confronting coastal resource managers are as divisive or difficult to manage as regulating the construction of private recreational docks and piers associated with residential development. State resource managers face a growing population intent on living on or near the coast, coupled with an increasing desire to have immediate access to the water by private docks or piers. (PDF contains 69 pages)

STARTEC: Novel processing technologies in the development of a decision support tool to ensure safe and nutritious Ready-To-Eat foods

Ready-to-eat (RTE) foods can be readily consumed with minimum or without any further preparation; their processing is complex—involving thorough decontamination processes— due to their composition of mixed ingredients. Compared with conventional preservation technologies, novel processing technologies can enhance the safety and quality of these complex products by reducing the risk of pathogens and/ or by preserving related health-promoting compounds. These novel technologies can be divided into two categories: thermal and non-thermal. As a non-thermal treatment, High Pressure Processing is a very promising novel methodology that can be used even in the already packaged RTE foods. A new “volumetric” microwave heating technology is an interesting cooking and decontamination method directly applied to foods. Cold Plasma technology is a potential substitute of chlorine washing in fresh vegetable decontamination. Ohmic heating is a heating method applicable to viscous products but also to meat products. Producers of RTE foods have to deal with challenging decisions starting from the ingredients suppliers to the distribution chain. They have to take into account not only the cost factor but also the benefits and food products’ safety and quality. Novel processing technologies can be a valuable yet large investment for several SME food manufacturers, but they need support data to be able to make adequate decisions. Within the FP7 Cooperation funded by the European Commission, the STARTEC project aims to develop an IT decision supporting tool to help food business operators in their risk assessment and future decision making when producing RTE foods with or without novel preservation technologies.

Decision support tool for Virtual Power Players: Hybrid Particle Swarm Optimization applied to Day-ahead Vehicle-To-Grid Scheduling

This paper presents a decision support tool methodology to help virtual power players (VPPs) in the Smart Grid (SGs) context to solve the day-ahead energy resource scheduling considering the intensive use of Distributed Generation (DG) and Vehicle-To-Grid (V2G). The main focus is the application of a new hybrid method combing a particle swarm approach and a deterministic technique based on mixedinteger linear programming (MILP) to solve the day-ahead scheduling minimizing total operation costs from the aggregator point of view. A realistic mathematical formulation, considering the electric network constraints and V2G charging and discharging efficiencies is presented. Full AC power flow calculation is included in the hybrid method to allow taking into account the network constraints. A case study with a 33-bus distribution network and 1800 V2G resources is used to illustrate the performance of the proposed method.

An economic decision support tool for simulating paratuberculosis control strategies in a UK suckler beef herd

A dynamic, deterministic, economic simulation model was developed to estimate the costs and benefits of controlling Mycobacterium avium subsp. paratuberculosis (Johne's disease) in a suckler beef herd. The model is intended as a demonstration tool for veterinarians to use with farmers. The model design process involved user consultation and participation and the model is freely accessible on a dedicated website. The 'user-friendly' model interface allows the input of key assumptions and farm specific parameters enabling model simulations to be tailored to individual farm circumstances. The model simulates the effect of Johne's disease and various measures for its control in terms of herd prevalence and the shedding states of animals within the herd, the financial costs of the disease and of any control measures and the likely benefits of control of Johne's disease for the beef suckler herd over a 10-year period. The model thus helps to make more transparent the 'hidden costs' of Johne's in a herd and the likely benefits to be gained from controlling the disease. The control strategies considered within the model are 'no control', 'testing and culling of diagnosed animals', 'improving management measures' or a dual strategy of 'testing and culling in association with improving management measures'. An example 'run' of the model shows that the strategy 'improving management measures', which reduces infection routes during the early stages, results in a marked fall in herd prevalence and total costs. Testing and culling does little to reduce prevalence and does not reduce total costs over the 10-year period.

The influence of a decision support tool on real estate valuations

An appraisal task involves the rendering of market value, an unobservable and hypothetical construct. Direct feedback against this objective is typically not possible, so alternative feedback such as confirmation of previous appraised values may be employed. This may alter the appraiser’s perception of the valuation objective leading to divergence from the appraisal normative model. The real estate literature suggests appraisers have been susceptible to the influence of previous appraised values, often resulting in biased valuations. This research focuses on the efficacy of a decision support tool in eliminating or subduing this bias in the appraisal process.

Modelling of control options for an outbreak of Mycoplasma gallisepticum in egg production: a decision support tool

Mycoplasma gallisepticum (MG) is a bacterium that causes respiratory disease in chickens, leading to reduced egg production. A dynamic simulation model was developed that can be used to assess the costs and benefits of control using antimicrobials or vaccination in caged or free range systems. The intended users are veterinarians and egg producers. A user interface is provided for input of flock specific parameters. The economic consequence of an MG outbreak is expressed as a reduction in expected egg output. The model predicts that either vaccination or microbial treatment can approximately halve potential losses from MG in some circumstances. Sensitivity analysis is used to test assumptions about infection rate and timing of an outbreak. Feedback from veterinarians points to the value of the model as a discussion tool with producers.

Investigating mental health risk assessment in primary care and the potential role of a structured decision support tool, GRiST

Aim: To explore current risk assessment processes in general practice and Improving Access to Psychological Therapies (IAPT) services, and to consider whether the Galatean Risk and Safety Tool (GRiST) can help support improved patient care. Background: Much has been written about risk assessment practice in secondary mental health care, but little is known about how it is undertaken at the beginning of patients' care pathways, within general practice and IAPT services. Methods: Interviews with eight general practice and eight IAPT clinicians from two primary care trusts in the West Midlands, UK, and eight service users from the same region. Interviews explored current practice and participants' views and experiences of mental health risk assessment. Two focus groups were also carried out, one with general practice and one with IAPT clinicians, to review interview findings and to elicit views about GRiST from a demonstration of its functionality. Data were analysed using thematic analysis. Findings Variable approaches to mental health risk assessment were observed. Clinicians were anxious that important risk information was being missed, and risk communication was undermined. Patients felt uninvolved in the process, and both clinicians and patients expressed anxiety about risk assessment skills. Clinicians were positive about the potential for GRiST to provide solutions to these problems. Conclusions: A more structured and systematic approach to risk assessment in general practice and IAPT services is needed, to ensure important risk information is captured and communicated across the care pathway. GRiST has the functionality to support this aspect of practice.

Agent based simulation as a novel decision support tool for retail managers

Intelligent agents offer a new and exciting way of understanding the world of work. We apply agent-based simulation to investigate a set of problems in a retail context. Specifically, we are working to understand the relationship between human resource management practices and retail productivity. Our multi-disciplinary research team draws upon expertise from work psychologists and computer scientists. Our research so far has led us to conduct case study work with a top ten UK retailer. Based on our case study experience and data we are developing a simulator that can be used to investigate the impact of management practices (e.g. training, empowerment, teamwork) on customer satisfaction and retail productivity.

Creating a proactive decision-support environment in managing road traffic noise

Properly designed decision support environments encourage proactive and objective decision making. The work presented in this paper inquires into developing a decision support environment and a tool to facilitate objective decision making in dealing with road traffic noise. The decision support methodology incorporates traffic amelioration strategies both within and outside the road reserve. The project is funded by the CRC for Construction Innovation and conducted jointly by the RMIT University and the Queensland Department of Main Roads (MR) in collaboration with the Queensland Department of Public Works, Arup Pty Ltd., and the Queensland University of Technology. In this paper, the proposed decision support framework is presented in the way of a flowchart which enabled the development of the decision support tool (DST). The underpinning concept is to establish and retain an information warehouse for each critical road segment (noise corridor) for a given planning horizon. It is understood that, in current practice, some components of the approach described are already in place but not fully integrated and supported. It provides an integrated user-friendly interface between traffic noise modeling software, noise management criteria and cost databases.

Decision support for the efficient annotation of bioacoustic events

Acoustic sensors allow scientists to scale environmental monitoring over large spatiotemporal scales. The faunal vocalisations captured by these sensors can answer ecological questions, however, identifying these vocalisations within recorded audio is difficult: automatic recognition is currently intractable and manual recognition is slow and error prone. In this paper, a semi-automated approach to call recognition is presented. An automated decision support tool is tested that assists users in the manual annotation process. The respective strengths of human and computer analysis are used to complement one another. The tool recommends the species of an unknown vocalisation and thereby minimises the need for the memorization of a large corpus of vocalisations. In the case of a folksonomic tagging system, recommending species tags also minimises the proliferation of redundant tag categories. We describe two algorithms: (1) a “naïve” decision support tool (16%–64% sensitivity) with efficiency of O(n) but which becomes unscalable as more data is added and (2) a scalable alternative with 48% sensitivity and an efficiency ofO(log n). The improved algorithm was also tested in a HTML-based annotation prototype. The result of this work is a decision support tool for annotating faunal acoustic events that may be utilised by other bioacoustics projects.