Crop pest and horticultural report.

Mode of access: Internet.

Report of the State Entomologist and Plant Pathologist, on the San José scale and the administration of the crop pest laws of Virginia, .

Mode of access: Internet.

Crop pest notice.

Mode of access: Internet.

Assessing Needs for Computer Pest Management Software in Nebraska Agriculture

A mail survey was conducted to assess current computer hardware use and perceived needs of potential users for software related to crop pest management in Nebraska. Surveys were sent to University of Nebraska-Lincoln agricultural extension agents, agribusiness personnel (including independent crop consultants), and crop producers identified by extension agents as computer users. There were no differences between the groups in several aspects of computer hardware use (percentage computer use, percentage IBM-compatible computer, amount of RAM memory, percentage with hard drive, hard drive size, or monitor graphics capability). Responses were similar among the three groups in several areas that are important to crop pest management (pest identification, pest biology, treatment decision making, control options, and pesticide selection), and a majority of each group expressed the need for additional sources of such information about insects, diseases, and weeds. However, agents mentioned vertebrate pest management information as a need more often than the other two groups. Also, majorities of each group expressed an interest in using computer software, if available, to obtain information in these areas. Appropriate software to address these needs should find an audience among all three groups.

Final report on research project PS2010, proof of concept of automated mapping of weeds in arable fields

Many weeds occur in patches but farmers frequently spray whole fields to control the weeds in these patches. Given a geo-referenced weed map, technology exists to confine spraying to these patches. Adoption of patch spraying by arable farmers has, however, been negligible partly due to the difficulty of constructing weed maps. Building on previous DEFRA and HGCA projects, this proposal aims to develop and evaluate a machine vision system to automate the weed mapping process. The project thereby addresses the principal technical stumbling block to widespread adoption of site specific weed management (SSWM). The accuracy of weed identification by machine vision based on a single field survey may be inadequate to create herbicide application maps. We therefore propose to test the hypothesis that sufficiently accurate weed maps can be constructed by integrating information from geo-referenced images captured automatically at different times of the year during normal field activities. Accuracy of identification will also be increased by utilising a priori knowledge of weeds present in fields. To prove this concept, images will be captured from arable fields on two farms and processed offline to identify and map the weeds, focussing especially on black-grass, wild oats, barren brome, couch grass and cleavers. As advocated by Lutman et al. (2002), the approach uncouples the weed mapping and treatment processes and builds on the observation that patches of these weeds are quite stable in arable fields. There are three main aspects to the project. 1) Machine vision hardware. Hardware component parts of the system are one or more cameras connected to a single board computer (Concurrent Solutions LLC) and interfaced with an accurate Global Positioning System (GPS) supplied by Patchwork Technology. The camera(s) will take separate measurements for each of the three primary colours of visible light (red, green and blue) in each pixel. The basic proof of concept can be achieved in principle using a single camera system, but in practice systems with more than one camera may need to be installed so that larger fractions of each field can be photographed. Hardware will be reviewed regularly during the project in response to feedback from other work packages and updated as required. 2) Image capture and weed identification software. The machine vision system will be attached to toolbars of farm machinery so that images can be collected during different field operations. Images will be captured at different ground speeds, in different directions and at different crop growth stages as well as in different crop backgrounds. Having captured geo-referenced images in the field, image analysis software will be developed to identify weed species by Murray State and Reading Universities with advice from The Arable Group. A wide range of pattern recognition and in particular Bayesian Networks will be used to advance the state of the art in machine vision-based weed identification and mapping. Weed identification algorithms used by others are inadequate for this project as we intend to collect and correlate images collected at different growth stages. Plants grown for this purpose by Herbiseed will be used in the first instance. In addition, our image capture and analysis system will include plant characteristics such as leaf shape, size, vein structure, colour and textural pattern, some of which are not detectable by other machine vision systems or are omitted by their algorithms. Using such a list of features observable using our machine vision system, we will determine those that can be used to distinguish weed species of interest. 3) Weed mapping. Geo-referenced maps of weeds in arable fields (Reading University and Syngenta) will be produced with advice from The Arable Group and Patchwork Technology. Natural infestations will be mapped in the fields but we will also introduce specimen plants in pots to facilitate more rigorous system evaluation and testing. Manual weed maps of the same fields will be generated by Reading University, Syngenta and Peter Lutman so that the accuracy of automated mapping can be assessed. The principal hypothesis and concept to be tested is that by combining maps from several surveys, a weed map with acceptable accuracy for endusers can be produced. If the concept is proved and can be commercialised, systems could be retrofitted at low cost onto existing farm machinery. The outputs of the weed mapping software would then link with the precision farming options already built into many commercial sprayers, allowing their use for targeted, site-specific herbicide applications. Immediate economic benefits would, therefore, arise directly from reducing herbicide costs. SSWM will also reduce the overall pesticide load on the crop and so may reduce pesticide residues in food and drinking water, and reduce adverse impacts of pesticides on non-target species and beneficials. Farmers may even choose to leave unsprayed some non-injurious, environmentally-beneficial, low density weed infestations. These benefits fit very well with the anticipated legislation emerging in the new EU Thematic Strategy for Pesticides which will encourage more targeted use of pesticides and greater uptake of Integrated Crop (Pest) Management approaches, and also with the requirements of the Water Framework Directive to reduce levels of pesticides in water bodies. The greater precision of weed management offered by SSWM is therefore a key element in preparing arable farming systems for the future, where policy makers and consumers want to minimise pesticide use and the carbon footprint of farming while maintaining food production and security. The mapping technology could also be used on organic farms to identify areas of fields needing mechanical weed control thereby reducing both carbon footprints and also damage to crops by, for example, spring tines. Objective i. To develop a prototype machine vision system for automated image capture during agricultural field operations; ii. To prove the concept that images captured by the machine vision system over a series of field operations can be processed to identify and geo-reference specific weeds in the field; iii. To generate weed maps from the geo-referenced, weed plants/patches identified in objective (ii).

Natal nest locations of the Asian house rat (Rattus tanezumi) in lowland rice–coconut cropping systems: a coconut penthouse or rice bunds with water frontage?

CONTEXT. Rattus tanezumi is a serious crop pest within the island of Luzon, Philippines. In intensive flood-irrigated rice field ecosystems of Luzon, female R. tanezumi are known to primarily nest within the tillers of ripening rice fields and along the banks of irrigation canals. The nesting habits of R. tanezumi in complex rice–coconut cropping systems are unknown. AIMS. To identify the natal nest locations of R. tanezumi females in rice–coconut systems of the Sierra Madre Biodiversity Corridor (SMBC), Luzon, during the main breeding season to develop a management strategy that specifically targets their nesting habitat. METHODS. When rice was at the booting to ripening stage, cage-traps were placed in rice fields adjacent to coconut habitat. Thirty breeding adult R. tanezumi females were fitted with radio-collars and successfully tracked to their nest sites. KEY RESULTS. Most R. tanezumi nests (66.7%) were located in coconut groves, five nests (16.7%) were located in rice fields and five nests (16.7%) were located on the rice field edge. All nests were located above ground level and seven nests were located in coconut tree crowns. The median distance of nest sites to the nearest rice field was 22.5m. Most nest site locations had good cover of ground vegetation and understorey vegetation, but low canopy cover. Only one nest location had an understorey vegetation height of less than 20 cm. CONCLUSIONS. In the coastal lowland rice–coconut cropping systems of the SMBC, female R. tanezumi showed a preference for nesting in adjacent coconut groves. This is contrary to previous studies in intensive flood-irrigated rice ecosystems of Luzon, where the species nests mainly in the banks of irrigation canals. It is important to understand rodent breeding ecology in a specific ecosystem before implementing appropriate management strategies. IMPLICATIONS. In lowland rice–coconut cropping systems, coconut groves adjacent to rice fields should be targeted for the 20 management of R. tanezumi nest sites during the main breeding season as part of an integrated ecologically based approach to rodent pest management.

Efeito da adição de óleos ao acaricida cyhexatin sobre o ácaro Brevipalpus phoenicis e na retenção de calda por folhas de citros

A adição de óleos à calda de pulverização, muitas vezes, é utilizada a campo sem o adequado conhecimento sobre a absorção do produto fitossanitário pelo alvo, retenção de calda e até mesmo sobre a praga e a cultura. O objetivo do trabalho foi avaliar o efeito da adição de óleos ao acaricida cyhexatin sobre o ácaro Brevipalpus phoenicis e na retenção de calda por folhas de citros. Avaliou-se a mortalidade de ácaros, utilizando-se de frutos de laranja com uma arena circundada com cola entomológica para confinar os ácaros. Adotou-se o delineamento inteiramente casualizado, em esquema fatorial, constituído pelos fatores: duas formulações de cyhexatin (WG e SC), dois tipos de óleo (mineral e vegetal) e duas concentrações dos óleos (0,5 e 1,0%), e mais dois tratamentos adicionais (acaricidas não adicionados de óleo) e uma testemunha sem aplicação. A aplicação dos produtos foi realizada sobre frutos de laranja até além do ponto de escorrimento. Logo após a aplicação, transferiram-se 10 ácaros B. phoenicis para cada fruto.A contagem dos ácaros vivos, mortos e retidos na barreira adesiva foi realizada um dia após a aplicação. Para a determinação da quantidade de calda retida, utilizaram-se folhas de laranjeira, que foram pulverizadas até além do ponto de escorrimento, adotando-se os mesmos tratamentos e o delineamento estatístico mencionados para a avaliação da mortalidade de ácaros, com exceção da testemunha sem aplicação. Determinou-se a massa de líquido retido após a aplicação dos produtos por folha, com auxílio de balança de precisão. Verificou-se que um dia após a aplicação dos produtos, todos os tratamentos apresentaram mortalidade de B. phoenicis acima de 99%. Dessa forma, a adição de óleo, seja mineral, seja vegetal, ao acaricida cyhexatin não afetou a eficácia biológica deste acaricida nas formulações SC e WG. A maior fuga de B. phoenicis para a barreira de cola foi verificada nos tratamentos com adição de óleos, em comparação ao cyhexatin aplicado isoladamente. A adição de óleo, seja mineral, seja vegetal, ao cyhexatin na calda de pulverização reduziu a quantidade máxima de líquido retido pelas folhas de citros, podendo contribuir para a redução da quantidade de calda necessária para uma boa cobertura da planta.

Air-assisted boom sprayer and spray deposition on bean plants

A possibilidade do desenvolvimento de técnicas de aplicação de produtos fitossanitários mais seguras, com menores volumes de calda, número de aplicações e deriva, aliados à necessidade de se obter melhores níveis de controle dos agentes nocivos às plantas cultivadas, justificam o uso da assistência de ar junto à barra de pulverização. Com o objetivo de avaliar a deposição da pulverização na cultura do feijoeiro (Phaseolus vulgaris), em presença e ausência da assistência de ar junto à barra de pulverização, com diferentes pontas de pulverização e volumes de calda, foi conduzido um experimento em delineamento inteiramente casualizado, utilizando-se como traçador o óxido cuproso. Alvos artificiais (papel filtro com 3 x 3 cm) foram afixados nas superfícies adaxial e abaxial de folíolos posicionados nos terços superior e inferior de plantas, selecionadas ao acaso, distribuídas perpendicularmente ao deslocamento do pulverizador. Após a aplicação do traçador os coletores foram lavados individualmente em solução extratora de ácido nítrico a 1,0 mol L-1. A determinação quantitativa dos depósitos foi realizada com o uso da espectrofotometria de absorção atômica. A assistência de ar junto à barra de pulverização não aumentou a deposição do traçador em folíolos de feijoeiro, aos 48 dias após a emergência da cultura.

Description of the immatures of Linepithema humile Mayr (Hymenoptera: Formicidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Flutua_̧tiao populacional de formas aladas de Brevicoryne brassicae (L.) (Hemiptera: Aphididae)

Studies related with the flight activity of aphids captured with traps can be useful to predict the appearance of alate forms in the field. It is also useful to understand the population dynamics of those insects. This work was carried out at the Faculdade de Ciências Agrárias e Veterinárias, Universidade Estadual Paulista, Jaboticabal, State of São Paulo, during the period from July 1997 to December 1999, aiming to determine the population curve of alate Brevicoryne brassicae (L.) in the region of Jaboticabal and the influence meteorological factors plays on it. The population survey was carried out in four places, and the alate aphids were sampled by yellow water traps. The influence of air temperature, relative humidity, rainfall and sunshine brightness was verified using stepwise regression. The first captures of alate B. brassicae in the traps began at the end of June. In the region of Jaboticabal, the population curve of alate B. brassicae showed the highest frequency of flights during September. The appearance of alate forms in kale fields at initial stage of development was favored by maximum and minimum temperatures of 26.4°C and 13.5°C, respectively; relative humidity of 75.1%, and reduced rainfall.

Reação de cultivares de cana-de-açúcar à broca do colmo

The objective of this study was to evaluate the reaction of ten sugarcane cultivars to Diatraea saccharalis under field conditions, using a randomized block design with treatments in factorial 2x10 with six replications. The first factor was represented by two levels of infestation (infested and not infested) by borer and the second one, by the ten sugarcane varieties (IAC87-3396, IAC91-1099, IACSP93-3046, IACSP94-2101, IACSP94-2094, IACSP94-4004, IACSP95-5000, IACSP96-3060, IACSP96-2042 and SP91-1115). The experiment was evaluated in two crop cycles: plant crop and first ratoon. All cultivars were attacked by the borer, being IACSP94-4004, IACSP96-2042 and SP91-1115 the most damaged cultivars with the highest infestation index. During the plant crop, plots infested by the borer presented higher fiber content than the ones not infested. During the first ratoon, non infested plants produced 10% less and presented lower purity and higher content of reducing sugars than the non-infested plants.

Quality control of Cotesia flavipes (Cameron) (Hymenoptera: Braconidae) from different Brazilian bio-factories

The goal of this study was to evaluate the quality of Cotesia flavipes from different bio-factories as biological control agents. We evaluated biological characteristics of the parasitoids throughout their lifespan, and measured the body length and width, abdomen width, thorax width and width and length of the right forewing of female and male parasitoids. Our results showed that the number of males and pupal viability were similar among the bio-factories; the number of emerged females was greater in bio-factories I and II; the egg-pupa period and the pupal period were shorter in bio-factory IV; and a greater longevity was found in bio-factories II and III. Sex ratio (at approximately 60% females) was satisfactory (in terms of suitability for release) across all bio-factories. For morphometric measurements, the body, abdomen and wing widths were similar in males; however, thorax width was greater in the males from bio-factory I; bio-factory III produced females with the highest body length; bio-factory I produced females with the greatest abdomen width; bio-factories III and IV produced females with the greatest wing length. Among the bio-factories studied, bio-factory IV produced the best quality C. flavipes, with respect to the greatest number of parasitoids per pupal mass (a mean of 57% more parasitoids) in a satisfactory sex ratio, and with the shortest developmental time, which facilitates faster rearing in the laboratory. Studies such as this, which assess the quality of a mass-produced C. flavipes, are crucial for the continued use of this parasitoid in controlling Diatraea saccharalis in the field. © 2013 Copyright Taylor and Francis Group, LLC.

Caracterização patogênica e molecular de isolados de Beauveria sp e Matarhizium sp de diferentes regiões do Brasil para o contole de Diatraea saccharalis Fabricius (Leídoptera: Crambidae)

Pós-graduação em Microbiologia - IBILCE

Pulverização eletrostática e assistência de ar no tratamento fitossanitário na cultura do algodoeiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morfologia do testículo e espermatogênese em Telchin licus (Drury, 1773) (Lepidoptera: Castiniidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)