Mixed-use corrugated skyscraper: progetto di un grattacielo in Dubai con studio di superficie continua ondulata derivata da funzioni periodiche

Questo lavoro di tesi verte sulla progettazione architettonica di un grattacielo ad uso misto nel cuore di Dubai. E’ stato scelto come sito di collocazione proprio Dubai in quanto fiorente cittadina in grande e continua espansione. In uno skyline così eterogeneo, caratterizzato da grattacieli imponenti, è stato possibile progettare un edificio dall’importante volumetria e dalla particolare conformazione. Partendo da un modello di riferimento in campo biologico, il Saguaro Cactus, si è tratto spunto al fine di creare un ambiente che, seppure nella sua imponenza, potesse, dal suo interno, trasmettere un senso di spazio fluido e continuo ai suoi fruitori. A raggiungimento di tal scopo si è pensato ad una superficie fluida, continua, scanalata che avvolgesse tutta la struttura, creando rientranze, aggetti ed aperture trattandone

Estacionalidad y formación continua : el caso balear.

Resumen tomado de la propia publicación

Influencia de la materia orgánica en la superficie específica de un Argiudol típico

El contenido de materia orgánica (MO) del suelo se relaciona positivamente, en algunos casos, con la superficie específica (SE) del mismo, pero grandes cantidades de MO pueden resultar en una SE menor, cuando se la determina a través de la adsorción de nitrógeno a bajas temperaturas. Tradicionalmente se asocia a la MO una elevada SE, del orden de los 500 a 800 m2 g-1. Estos valores, obtenidos mediante técnicas que emplean solventes polares, por ejemplo, etilenglicol, hicieron suponer que la misma contribuye en gran medida a la SE del suelo. No obstante, hay referencias que señalan una sobrestimación de los resultados obtenidos, atribuida a la utilización de estos solventes. Mediciones que emplean el método con adsorción de N2 a 77 K, cuya interpretación se basa en el modelo de Brunauer, Emmett y Teller (BET), considerado internacionalmente como método patrón, arrojan valores de SE para la MO que son menores que los primeros, en dos órdenes de magnitud. Con el objetivo de aportar conocimiento que contribuyera a una mejor comprensión del papel de la MO en procesos edáficos, se realizaron determinaciones de SE en muestras de un Argiudol típico, con diferentes contenidos de MO y contenido de arcilla constante (20%). Las medidas se llevaron a cabo interpretando las isotermas de adsorción de N2 a 77 K, mediante el modelo BET. Los resultados obtenidos mostraron una relación no lineal negativa entre la SE y el contenido de MO. La eliminación de la MO mediante H2O2 incrementó la SE de las muestras en todos los casos. La variación de SE por unidad de MO eliminada sugiere que la misma no se adsorbe de manera uniforme y continua sobre la superficie de la fase mineral.

Effect of differentially heating and consequent transient behaviour for natural convection within an enclosure of sinusoidal corrugated side walls

Unsteady natural convection due to differentially heating of the sinusoidal corrugated side walls of a modified square enclosure has been numerically investigated. The fluid inside the enclosure is air, initially as quiescent. The flat top and bottom surfaces are considered as adiabatic. The numerical scheme is based on the finite element method adapted to triangular non-uniform mesh element by a non-linear parametric solution algorithm. The results are obtained for the Rayleigh number, Ra ranging from 1e+05 to 1e+08 for different corrugation amplitude and frequency with constant physical properties for the fluid medium considered. The streamlines, isotherms and average Nusselt numbers are presented to observe the effect of sudden heating and its consequent transient behavior on fluid flow and heat transfer characteristics for the range of governing parameters. The present results show that the transient phenomena are greatly influenced by the variation of the aforementioned parameters.

Unsteady natural convection within a differentially heated enclosure of sinusoidal corrugated side walls

Numerically investigation of natural convection within a differentially heated modified square enclosure with sinusoidally corrugated side walls has been performed for different values of Rayleigh number. The fluid inside the enclosure considered is air and is quiescent, initially. The top and bottom surfaces are flat and considered as adiabatic. Results reveal three main stages: an initial stage, a transitory or oscillatory stage and a steady stage for the development of natural convection flow inside the corrugated cavity. The numerical scheme is based on the finite element method adapted to triangular non-uniform mesh element by a non-linear parametric solution algorithm. Investigation has been performed for the Rayleigh number, Ra ranging from 105 to 108 with variation of corrugation amplitude and frequency. Constant physical properties for the fluid medium have been assumed. Results have been presented in terms of the isotherms, streamlines, temperature plots, average Nusselt numbers, traveling waves and thermal boundary layer thickness plots, temperature and velocity profiles. The effects of sudden differential heating and its consequent transient behavior on fluid flow and heat transfer characteristics have been observed for the range of governing parameters. The present results show that the transient phenomena are greatly influenced by the variation of the Rayleigh Number with corrugation amplitude and frequency.

Fatigue behaviour of corrugated roofing under cycling wind loading

Low cycle fatigue cracking of light gauge metal roofing was investigated by testing a number of two-span corrugated roofing assemblies with different spans and fastening systems under cyclic uplift wind loading. Fatigue results correlated quite well with the corresponding static results reported earlier, and revealed the dependence of fatigue behaviour on the fastening system used. A comparison was made of one fastening system with the other regarding fatigue performance .

Unsteady natural convection within a porous enclosure of sinusoidal corrugated side walls

Numerically investigation of free convection within a porous cavity with differential heating has been performed using modified corrugated side walls. Sinusoidal hot left and cold right walls are assumed to receive sudden differentially heating where top and bottom walls are insulated. Air is considered as working fluid and is quiescent, initially. Numerical experiments reveal 3 distinct stages of developing pattern including initial stage, oscillatory intermediate and finally steady state condition. Implicit Finite Volume Method with TDMA solver is used to solve the governing equations. This study has been performed for the Rayleigh numbers ranging from 100 to 10,000. Outcomes have been reported in terms of isotherms, streamline, velocity and temperature plots and average Nusselt number for various Ra, corrugation frequency and corrugation amplitude. The effects of sudden differential heating and its resultant transient behavior on fluid flow and heat transfer characteristics have been shown for the range of governing parameters. The present results show that the transient phenomena are enormously influenced by the variation of the Rayleigh Number with corrugation amplitude and frequency.

Behaviour of corrugated steel roof cladding under combined wind uplift and racking

During high wind events, crest-fixed profiled steel roof claddings in low-rise buildings can be subjected to combined cyclic wind uplift and in-plane racking (shear) forces. Static and cyclic tests of corrugated steel roof claddings were carried out to investigate the effect of in-plane racking force on the uplift strength, in particular, in relation to the fatigue cracking commonly observed under cyclic wind uplift. The presence of racking force appeared to have insignificant effect on the static and cyclic wind uplift strength. It may therefore be possible to include the diaphragm strength of these claddings in the design of low-rise buildings in a similar manner to valley-fixed claddings. This may lead to a reduction in bracing requirements.

Simulated systems optimization through response surface techniques [Optimización de sistemas simulados a través de técnicas de superficie de respuesta]

The purpose of this article is to show the applicability and benefits of the techniques of design of experiments as an optimization tool for discrete simulation models. The simulated systems are computational representations of real-life systems; its characteristics include a constant evolution that follows the occurrence of discrete events along the time. In this study, a production system, designed with the business philosophy JIT (Just in Time) is used, which seeks to achieve excellence in organizations through waste reduction in all the operational aspects. The most typical tool of JIT systems is the KANBAN production control that seeks to synchronize demand with flow of materials, minimize work in process, and define production metrics. Using experimental design techniques for stochastic optimization, the impact of the operational factors on the efficiency of the KANBAN / CONWIP simulation model is analyzed. The results show the effectiveness of the integration of experimental design techniques and discrete simulation models in the calculation of the operational parameters. Furthermore, the reliability of the methodologies found was improved with a new statistical consideration.

Hydrodynamic pressure on a dam with a periodically corrugated reservoir bed

The problem of determining the hydrodynamic pressure, caused by earthquake forces, on a dam with a vertical upstream face and a periodically corrugated reservoir bed is solved approximately by employing a Fourier cosine transform technique to the linearised equations of inviscid and incompressible flow. A particular case of the present problem giving rise to results valid for dams with flat reservoir beds is shown to produce known results as a check of the method used.