RB32-266 Cooling Milk on Nebraska Farms

The desire of Nebraska people to continue the improvement of living conditions and to secure more healthful foods has been responsible for many changes in methods of caring for milk. One of the important factors in keeping milk sweet and of good quality is the process of cooling and keeping it cool until used. Three of these processes are as follows: placing containers of warm milk in any quantity of still water or still air at temperatures ranging from freezing to within a few degrees of the temperature of the milk, placing the containers in such positions that air or water are circulated around them, and causing the milk to flow in such manner that a thin film comes in contact with a surface which is cooled by air or liquids varying in temperature from 10 degrees Fahrenheit to a few degrees below that of the milk. After some of the heat has been removed the milk is stored under conditions very similar to those found in cooling processes. This 1932 research bulletin discusses why milk is cooled, why milk sours, how bacteria grows, and the many ways that milk can be cooled.

Concepção de uma instalação frigorífica com atmosfera controlada para a conservação de uvas de mesa

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Municipio saludable como polo de desarrollo local "diagnóstico situación láctea Macheta"

Este proyecto hace parte de un convenio entre la Gobernación de Cundinamarca y la Universidad del Rosario para desarrollar el proyecto Municipio Saludable como Polo de Desarrollo Local en tres municipios de Cundinamarca: Machetá, Sesquilé y Mesitas de El Colegio. Dicho programa tiene cuatro ejes, de los cuales la Facultad de Administración desarrolla el primer eje que se relaciona con la Generación de empleo e Ingresos. La investigación, objeto de estudio se llevó a cabo en el municipio de Machetá, donde se trabajó el tema lácteo con pequeños productores y se desarrolló el módulo de marco lógico, en el que se llevaron a cabo las siguientes actividades: a) Contacto con la comunidad, visitas periódicas al Municipio. b) Elaboración y aplicación de encuestas a funcionarios de la Alcaldía, vendedores de plaza y productores. c) Procesamiento y análisis de resultados. d) Construcción de árbol de problemas con la comunidad, e) Construcción de árbol de objetivos. f) Socialización con la comunidad. g) Elaboración de estrategias. h) Conclusiones y recomendaciones. Para mejorar las condiciones de vida de los pequeños productores de leche se recomienda la organización de una cooperativa u otro tipo de asociación que les permita ofertar un producto con cantidades, con la calidad que requieren las empresas procesadoras o entrar en un proceso mas elaborado que implica el montaje de un tanque de enfriamiento con capacidad mínima de 3.000 litros/diarios y /o procesar la leche para producir quesos y otros productos derivados de leche. Obtener esto, estabilizaría precios, ingresos y les daría poder de negociación que es algo con lo que no cuentan actualmente los pequeños productores.

Estudio de pre factibilidad para el montaje de un tanque de enfriamiento de leche en el municipio de Machetá, Cundinamarca

Este proyecto hace parte del Convenio suscrito entre El Colegio Mayor de Nuestra Señora del Rosario y la Gobernación de Cundinamarca, para adelantar el proyecto de “Municipio Saludables como Polo de Desarrollo Local (MSPDL)”, cuyo objetivo general es mejorar la calidad de vida de los habitantes de tres (3) municipios escogidos por la Gobernación de Cundinamarca: Mesitas de El Colegio, ubicado en la Provincia del Tequendama, Sesquilé y Machetá, ubicados en la Provincia de Almeidas. En el desarrollo del proyecto la Facultad de Administración de la Universidad del Rosario encontró en el municipio de Machetà, la Asociación “Vuestra Honrosa Labranza, asociación, formada por miembros de tres (3) veredas en el municipio. En las visitas realizadas al municipio y en las charlas sostenidas con algunos de los socios, manifestaron interés por la implementación del proyecto en su asociación. En reuniones y conversaciones sostenidas con el Secretario de Desarrollo Social de la Gobernación de Cundinamarca, en los que se han presentado varios informes de avance del proyecto Municipio Saludable como Polo de Desarrollo Local (MSPDL), se comentó explícitamente la problemática planteada por la Asociación Vuestra Honrosa Labranza”, con el fin de conseguir una forma para apoyarlos, con el montaje de un tanque de enfriamiento de leche. Para el desarrollo del estudio de Pre factibilidad del montaje de un tanque para el enfriamiento de la leche, se desarrollaran los capítulos de mercado, técnico, administrativo, legal, ambiental y financiero, con el fin de evaluar si esta información es suficiente y decidir si la idea del proyecto es viable o no.

Avaliação de métodos de análises para determinação da contagem de células somáticas no leite cru, mantido em tanque de resfriamento

We analyzed the quality of raw milk from eight dairy farms in Rio Grande do Norte stored in a cooling tank , in order to evaluate methods for determining somatic cell counts (SCC). The Somaticell® kit and a portable Direct Cell Counter (DCC) were compared with each other and with the MilkoScanTM FT+ (FOSS Denmark), which uses Fourier Transform Infrared (FTIR) spectroscopy). Direct cell counter data were processed for somatic cell scores (log-transformed somatic cell count) and analyzed with the SAS®, statistical package , Statistical Analysis System, (SAS, INSTITUTE, 1998). Comparison of means and correlation of somatic cell scores were conducted using Pearson s correlation coefficient and the Tukey Test at 1 %. No significant difference was observed for comparison of means. The correlation between somatic cell scores was significant, that is, 0.907 and 0.876 between the MilkoScanTM FT+ and the Somaticell® kit and Direct Cell Count (DCC) respectively, and 0.943 between the Somaticell® kit and Direct Cell Count (DCC). The methods can be recommended for monitoring the quality of raw milk kept in a cooling tank in the production unit

Fatores de influência na produção de leite bovino sobre os níveis da contagem bacteriana total

The objective of this study was to evaluate the influence of milking procedures on the levels of total bacterial count (TBC) in bovine milk. In the first study the influences of procedures for hygienic milking, cleaning of milking equipment and milk cooling tanks on the TBC levels were evaluated. Four bulk samples of milk were collected from each tank in eight properties for TBC analysis, employing the flow cytometry method. A questionnaire was applied in each property to assess the current situation of milking procedures on each production system that took part on this research, followed by training of employees in good agricultural practices in the production of milk and monitoring of the TBC measurements. The methodology for analysis of longitudinal data was considered, focusing on random effects models. The results showed that the handling procedures for milking and the cleanliness of the cooling tank contributed to a further reduction in the levels of TBC raw milk cooling tanks. The second study aimed to describe the percentage of the properties that comply with the Normative Instruction Nº 51 (Brazil s IN 51) with regard to total bacterial count (TBC) in bovine milk. The study was conducted from January 2010 to July 2011. Milk samples were collected from the eight properties selected for TBC analysis by the flow cytometry method. Again, on each property a questionnaire was applied to assess the current situation of milking procedures on each production system that took part on this research, followed by training of employees in good agricultural practices in the production of milk and monitoring of the TBC measurements. The methodology of marginal models based on Generalized Estimate Equations (GEEs) was followed in the statistical analysis. The results showed that the handling procedures of the milking and the cleanliness of the cooling tanks contributed to a considerable percentage of the properties that reached the limits of TBC established by IN 51

Atividade proteolìtica de bactérias psicrotróficas em leites estocados em diferentes temperaturas

The widespread use of cooling technology as a tool for maintaining the microbiological and organoleptic characteristics of milk, Without effective hygienic practices throughout the milk production, caused the psychrotrophic micro-organisms to become major deteriorative bacteria in the dairy industry. The present study aimed to assess how the proteolytic psychrotrophic metabolism responds to different milk storage temperatures, drawing a parallel among psychrotrophic growth, amount of micro-organisms capable of breaking down proteins and amount of GMP (glycomacropeptide) released. Milk samples were collected directly from the cooling tank and subjected to count of psychrotrophs, count of proteolytic micro-organisms and the concentration of GMP at different storage times and temperatures. There was no linearity between the microbiological parameters and the GMP measured, according to the time/temperature binomial. The highest concentration of GMP (5.07 mg/mL) was measured in the binomial 8°C/24h (T8/ M24). The data make clear the need for further studies about questions involving the psychrotrophic microbiota in order to clarify extremely important basic questions about their metabolism.

Pesquisa de Salmonella spp. em codornas de corte (Coturnix coturnix japonica)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Um estudo sobre as operações unitárias de agitação, troca de calor em tanques e mistura de pós

De todas as operações, a agitação de fluidos, a troca de calor em tanques e a mistura de pós são, sem dúvida, as mais usuais, principalmente, na indústria de alimentos. Embora exigindo um estudo em separado, é comum estas operações unitárias estarem presentes, em instantes diferentes, no mesmo processo de fabricação. O propósito deste trabalho é enfatizar procedimentos de projeto para problemas práticos nas indústrias de processos envolvendo estas três operações. O modelo matemático proposto para a agitação de fluidos foi aplicado na substituição das tradicionais âncoras por impelidores de pás retas e inclinadas no processamento do suco concentrado de laranja. Observou-se que o tempo de permanência do suco no tanque de resfriamento caiu de quarenta para cinco minutos em decorrência da maior ação de mistura provocada pelas pás retas. O modelo proposto acompanha bem as exigências de potências requeridas pelo suco na medida em que é resfriado...(Resumo completo, clicar acesso eletrônico abaixo)

Continuous vapour adsorption cooling system with three adsorber beds

In this paper, the design of a new solar operated adsorption cooling system with two identical small and one large adsorber beds, which is capable of producing cold continuously, has been proposed. In this system, cold energy is stored in the form of refrigerant in a separate refrigerant storage tank at ambient temperature. Silica gel water is used as a working pair and system is driven by solar energy. The operating principle is described in details and its thermodynamic transient analysis is presented. Effect of COP and SCE for different adsorbent mass and adsorption/desorption time of smaller beds are discussed. Recommended mass and number of cycles of operation for smaller beds to attain continuous cooling with average COP and SCE of 0.63 and 337.5 kJ/kg, respectively are also discussed, at a generation, condenser and evaporator temperatures of 368 K, 303 K and 283 K, respectively. (C) 2015 Elsevier Ltd. All rights reserved.

System Integration of PV/T Collectors in Solar Cooling Systems

The demand for cooling and air-conditioning of building is increasingly ever growing. This increase is mostly due to population and economic growth in developing countries, and also desire for a higher quality of thermal comfort. Increase in the use of conventional cooling systems results in larger carbon footprint and more greenhouse gases considering their higher electricity consumption, and it occasionally creates peaks in electricity demand from power supply grid. Solar energy as a renewable energy source is an alternative to drive the cooling machines since the cooling load is generally high when solar radiation is high. This thesis examines the performance of PV/T solar collector manufactured by Solarus company in a solar cooling system for an office building in Dubai, New Delhi, Los Angeles and Cape Town. The study is carried out by analyzing climate data and the requirements for thermal comfort in office buildings. Cooling systems strongly depend on weather conditions and local climate. Cooling load of buildings depend on many parameters such as ambient temperature, indoor comfort temperature, solar gain to the building and internal gains including; number of occupant and electrical devices. The simulations were carried out by selecting a suitable thermally driven chiller and modeling it with PV/T solar collector in Polysun software. Fractional primary energy saving and solar fraction were introduced as key figures of the project to evaluate the performance of cooling system. Several parametric studies and simulations were determined according to PV/T aperture area and hot water storage tank volume. The fractional primary energy saving analysis revealed that thermally driven chillers, particularly adsorption chillers are not suitable to be utilizing in small size of solar cooling systems in hot and tropic climates such as Dubai and New Delhi. Adsorption chillers require more thermal energy to meet the cooling load in hot and dry climates. The adsorption chillers operate in their full capacity and in higher coefficient of performance when they run in a moderate climate since they can properly reject the exhaust heat. The simulation results also indicated that PV/T solar collector have higher efficiency in warmer climates, however it requires a larger size of PV/T collectors to supply the thermally driven chillers for providing cooling in hot climates. Therefore using an electrical chiller as backup gives much better results in terms of primary energy savings, since PV/T electrical production also can be used for backup electrical chiller in a net metering mechanism.

Synthesis of Structured Lipids by Enzymatic Interesterification of Milkfat and Soybean Oil in a Basket-Type Stirred Tank Reactor

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A comparative study – regulatory requirements on subdivisions for increasing passive cooling

This is the third in a series of reports planned for this project. The aim of this research is to conduct a comparative study of current legislation or guidelines at the federal, state and local government levels to confirm if any natural ventilation criteria are required at the subdivision development stage of planning. It also seeks to discover if there are any other incentives, statutory planning or development principles that encourage developers to orient subdivision lots to maximize natural ventilation for the dwellings. Findings from the research in this report are intended to contribute to the discussion on the development of an enhanced lot rating methodology for sustainable subdivisions as documented in other reports in this series.

A comparative study : regulatory requirements on subdivisions for increasing passive cooling

A major project in the Sustainable Built Assets core area is the Sustainable Sub-divisions – Ventilation Project that is the second stage of a planned series of research projects focusing on sustainable sub-divisions. The initial project, Sustainable Sub-divisions: Energy focused on energy efficiency and examined the link between dwelling energy efficiency and sub-divisional layout. In addition, the potential for on site electricity generation, especially in medium and high-density developments, was also examined. That project recommended that an existing lot-rating methodology be adapted for use in SEQ through the inclusion of sub divisional appropriate ventilation data. Acquiring that data is the object of this project. The Sustainable Sub-divisions; Ventilation Project will produce a series of reports. The first report (Report 2002-077-B-01) summarised the results from an industry workshop and interviews that were conducted to ascertain the current attitudes and methodologies used in contemporary sub-division design in South East Queensland. The second report (Report 2002-077-B-02) described how the project is being delivered as outlined in the Project Agreement. It included the selection of the case study dwellings and monitoring equipment and data management process. This third report (Report 2002-077-B-03) provides an analysis and review of the approaches recommended by leading experts, government bodies and professional organizations throughout Australia that aim to increase the potential for passive cooling and heating at the subdivision stage. This data will inform issues discussed on the development of the enhanced lot-rating methodology in other reports of this series. The final report, due in June 2007, will detail the analysis of data for winter 2006 and summer 2007, leading to the development and delivery of the enhanced lot-rating methodology.