Inoculation methods under greenhouse conditions for evaluating soybean resistance to sudden death syndrome

The objectives of this work were to evaluate two greenhouse screening methods for sudden death syndrome (SDS) and to determine which one is best correlated with field resistance of soybean genotypes. The evaluations were done with three sets of genotypes that were classified as partially resistant, intermediate, and susceptible to SDS based on previous field evaluations. These three sets were independently evaluated for greenhouse SDS reactions using cone and tray inoculation methods. Plants were infected using grains of white sorghum [Sorghum bicolor (L.) Moench] infested with Fusarium solani f. sp. glycines. Foliar symptom severity was rated 21 days after emergence. The cone and field SDS ratings were significantly correlated and ranged from 0.69 for set 1 to 0.51 for set 3. Correlations of SDS ratings of genotypes between field and greenhouse tray ratings were significant for set 1 and not significant for set 2. The cone method showed the highest correlation with field results and is recommended to screen soybean genotypes for SDS resistance.

Mouse inoculation for the detection of non-cultivable gastric tightly spiralled bacteria

In the present study we compared the inoculation of swine gastric mucus into the stomach of mice, the urease test and carbolfuchsin-stained smears for the diagnosis of the infection with "Gastrospirillum suis" ("Helicobacter heilmannii" type 1), an uncultivated tightly spiralled gastric bacterium. Fragments obtained from the antral and oxyntic mucosa of the stomach of 50 slaughtered pigs were used for urease test, for carbolfuchsin-stained smears and for obtaining scrapings of mucus for mouse inoculation. The mice were killed by spinal dislocation 10 days after inoculation and fragments of the antral and oxyntic mucosa were used for spiral bacterium identification (urease test and carbolfuchsin-stained smears). Among the methods employed for the diagnosis of "H. heilmannii" infection, the inoculation of gastric mucus into the stomach of mice was the most sensitive and demonstrated bacterial positivity in 31 (62.0%) swine. Direct examination showed tightly spiralled bacteria in the gastric mucosa of only 4 (8.0%) of the 50 pigs studied. Among them, 3 (6.0%) presented a positive preformed urease test. Spiral bacteria were not seen in the gastric mucosa of any control mice. These results show that the use of the mouse inoculation method improved the detection of "H. heilmannii" in swine

The effects of yeast inoculation rate and acclimatization to juice on icewine fermentation /

Icewine is an intensely sweet, unique dessert wine fennented from the juice of grapes that have frozen naturally on the vine. The juice pressed from the frozen grapes is highly concentrated, ranging from a minimum of 35° Brix to approximately 42° Brix. Often Icewine fennentations are sluggish, taking months to reach the desired ethanol level, and sometimes become stuck. In 6 addition, Icewines have high levels of volatile acidity. At present, there is no routine method of yeast inoculation for fennenting Icewine. This project investigated two yeast inoculum levels, 0.2 gIL and 0.5 gIL. The fennentation kinetics of inoculating these yeast levels directly into the sterile Icewine juice or conditioning the cells to the high sugar levels using a step wise acclimatization procedure were also compared. The effect of adding GO-FERM, a yeast nutrient, was also assessed. In the sterile fennentations, yeast inoculated at 0.2 gIL stopped fennenting before the required ethanol level was achieved, producing only 7.8% (v/v) and 8.1 % (v/v) ethanol for the direct and conditioned inoculations, respectively. At 0.5 gIL, the stepwise conditioned cells fennented the most sugar, producing 12.2% (v/v) ethanol, whereas the direct inoculum produced 10.5% (v/v) ethanol. The addition of the yeast nutrient GO-FERM increased the rate of biomass accumulation, but reduced the ethanol concentration in wines fennented at 0.5 gIL. There was no significant difference in acetic acid concentration in the final wines across all treatments. Fennentations using unfiltered Icewine juice at the 0.5 gIL inoculum level were also compared to see if the effects of yeast acclimatization and micronutrient addition had the same impact on fennentation kinetics and yeast metabolite production as observed in the sterile-filtered juice fennentations. In addition, a full descriptive analysis of the finished wines was carried out to further assess the impact of yeast inoculation method on Icewine sensory quality. At 0.5 gIL, the stepwise conditioned cells fennented the most sugar, producing 11.5% (v/v) ethanol, whereas the direct inoculum produced 10.0% (v/v) ethanol. The addition of the yeast nutrient GO-FERM increased the peak viable cell numbers, but reduced the ethanol concentration in wines fennented at 0.5 gIL. There was a significant difference 7 in acetic acid concentration in the final wines across all treatments and all treatments affected the sensory profiles of the final wines. Wines produced by direct inoculation were described by grape and raisin aromas and butter flavour. The addition of GO-FERM to the direct inoculation treatment shifted the aroma/flavour profiles to more orange flavour and aroma, and a sweet taste profile. StepWise acclimatizing the cells resulted in wines described more by peach and terpene aroma. The addition of GO-FERM shifted the profile to pineapple and alcohol aromas as well as alcohol flavour. Overall, these results indicate that the addition of GO-FERM and yeast acclimatization shortened the length of fermentation and impacted the sensory profiles of the resultant wines.

A Method for Solving a Class of Multiple-Criteria Analysis Problems

AMS subject classification: 90C29.

Characterization and efficacy of bacterial strains for biological control of soil-borne diseases caused by Phytophthora cactorum and Meloidogyne javanica on Rosaceous plants

S'avaluaren 58 soques de Pseudomonas fluorescens i Pantoea agglomerans per la seva eficàcia en el biocontrol de la malaltia causada per l'oomicet Phytophthora cactorum en maduixera i pel nematode formador de gal·les Meloidogyne javanica en el portaempelt GF-677. Es desenvolupà un mètode ex vivo d'inoculació de fulla amb l'objectiu de seleccionar soques bacterianes com a agents de control biològic de P. cactorum en maduixera. Tres soques de P. fluorescens es seleccionaren com a soques eficaces en el biocontrol del patogen en fulles i en la reducció de la malaltia en plantes de maduixera. La combinació de soques semblà millorar la consistència del biocontrol en comparació amb les soques aplicades individualment. Tres soques de P. fluorescens es seleccionaren per la seva eficàcia en la reducció de la infecció de M. javanica en portaempelts GF-677. La combinació d'aquestes soques no incrementà l'eficàcia del biocontrol, però semblà reduir la seva variabilitat.

Reação de cultivares de soja a isolado de Curtobacterium flaccumfaciens pv. flaccumfaciens, proveniente de feijoeiro

O objetivo deste trabalho foi avaliar a reação das cultivares de soja Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 46, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 47, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 48, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 58, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 59, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 60, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 61, Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 62, BRS 66, BRS 132, BRS 133, BRS 134, BRS 135, BRS 136, BRS 155, BRS 156, BRS 157, IAC/BR-21, MG/BR-46 (Conquista) e MG/BR-48 (Garimpo RCH) a um isolado de Curtobacterium flaccumfaciens pv. flaccumfaciens, proveniente de feijoeiro, usando dois métodos de inoculação, em casa de vegetação. Foram observados baixos níveis de severidade da doença nas cultivares de soja, independentemente do método de inoculação utilizado.

Gama de hospedeiros e reação de genótipos de tomateiro a Pseudomonas cichorii

Em 2005, foi constatada em dois campos comerciais de tomate no Estado de São Paulo, a ocorrência da queima bacteriana, causada por Pseudomonas cichorii. em vista disso, foram desenvolvidos estudos visando a determinação da gama de hospedeiros de isolados de Pseudomonas cichorii (IBSBF 2309 e IBSBF 2323), obtidos de tomateiro, provenientes de campos comerciais localizados nos municípios de Bragança Paulista e Mogi Guaçú, SP. Plantas de abobrinha, alface, beldroega, berinjela, beterraba, cenoura, couvebrócolo, datura, fumo, girassol, jiló, melão, pepino, petúnia, pimentão, rabanete, repolho, rúcula, salsa e tomateiro foram inoculadas por pulverização, separadamente, com os dois isolados de P. cichorii de tomateiro e um isolado de girassol (GIR-1). Os isolados IBSBF 2309 e IBSBF 2323 foram patogênicos à beldroega, datura, girassol, pimentão e tomate; GIR-1 foi patogênico apenas à beldroega, datura e girassol, não sendo patogênico ao pimentão e ao tomateiro. No Brasil não se conhecem fontes de resistência dentro do gênero Lycopersicon ou a reação de cultivares de tomateiros a esta bactéria. Vinte e oito genótipos de tomateiro provenientes do Banco de Germoplasma da empresa Sakata Seed Sudamerica Ltda., foram avaliados quanto a reação aos isolados IBSBF 2309 e IBSBF 2323 de P. cichorii, pelo método de inoculação nas folhas. Os maiores níveis de resistência foram observados em AF 11768, AF 2521, AF 11766, AF 11772, AF 229, AF 5719-1 e AF 8162. O genótipo AF 5719-1, que possui o gene Pto, que confere resistência a P. syringae pv. tomato, apresentou um bom nível de resistência a P. cichorii. A identificação de genótipos que apresentem bons níveis de resistência a este patógeno é importante para utilização em programas de melhoramento genético do tomateiro, visando a incorporação de genes de resistência a P. cichorii.

Metodologias para determinação da reação de cultivares de soja à Fusarium tucumaniae

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sterilization of allograft bone: is 25 kGy the gold standard for gamma irradiation?

For several decades, a dose of 25 kGy of gamma irradiation has been recommended for terminal sterilization of medical products, including bone allografts. Practically, the application of a given gamma dose varies from tissue bank to tissue bank. While many banks use 25 kGy, some have adopted a higher dose, while some choose lower doses, and others do not use irradiation for terminal sterilization. A revolution in quality control in the tissue banking industry has occurred in line with development of quality assurance standards. These have resulted in significant reductions in the risk of contamination by microorganisms of final graft products. In light of these developments, there is sufficient rationale to re-establish a new standard dose, sufficient enough to sterilize allograft bone, while minimizing the adverse effects of gamma radiation on tissue properties. Using valid modifications, several authors have applied ISO standards to establish a radiation dose for bone allografts that is specific to systems employed in bone banking. These standards, and their verification, suggest that the actual dose could be significantly reduced from 25 kGy, while maintaining a valid sterility assurance level (SAL) of 10−6. The current paper reviews the methods that have been used to develop radiation doses for terminal sterilization of medical products, and the current trend for selection of a specific dose for tissue banks.

Determination of soybean cultivar resistance to soybean cyst nematode with quantitative polymerase chain reaction

Heterodera glycines, the soybean cyst nematode, is the major pathogen of Glycine max (soybean). Effective management of this pathogen is contingent on the use of resistant cultivars, thus screening for resistant cultivars is essential. The purpose of this research was to develop a method to assess infection of soybean roots by H. glycines with real-time quantitative Polymerase Chain Reaction (qPCR), a prelude to differentiation of resistance levels in soybean cultivars. Two experiments were conducted. In the first one, a consistent inoculation method was developed using to provide active second-stage juveniles (J2). Two-day-old soybean roots were infested with 0 and 1000 J2/mL. Twenty-four hours after infestation, the roots were surface sterilized and DNA was extracted with the DNA FastKit (MP Biomedicals, Santa Ana, CA)). For the qPCR assay, primer pair for single copy gene HgSNO, which codes for a protein involved in the production of vitamin B6, was selected for H. glycines DNA amplification within soybean roots. In the second experiment, compatible Lee 74, incompatible Peking and cultivars with different levels of resistance to H. glycines were inoculated with 0 and 1,000 J2/seedlings. Twenty-four hours post inoculation they were transplanted into pasteurized soil. Subsequently they were harvested at 1, 7, 10, 14 and 21 days post inoculation for DNA extraction. With the qPCR assay, the time needed to differentiate highly resistant cultivars from the rest was reduced. Quantification of H. glycines infection by traditional means (numbers of females produced in 30 days) is a time-consuming practice; the qPCR method can replace the traditional one and improve precision in determining infection levels.

Method for determination of root curvature radius using cone-beam computed tomography images

This article describes and discusses a method to determine root curvature radius by using cone-beam computed tomography (CBCT). The severity of root canal curvature is essential to select instrument and instrumentation technique. The diagnosis and planning of root canal treatment have traditionally been made based on periapical radiography. However, the higher accuracy of CBCT images to identify anatomic and pathologic alterations compared to panoramic and periapical radiographs has been shown to reduce the incidence of false-negative results. In high-resolution images, the measurement of root curvature radius can be obtained by circumcenter. Based on 3 mathematical points determined with the working tools of Planimp® software, it is possible to calculate root curvature radius in both apical and coronal directions. The CBCT-aided method for determination of root curvature radius presented in this article is easy to perform, reproducible and allows a more reliable and predictable endodontic planning, which reflects directly on a more efficacious preparation of curved root canals.

A new method for inoculation of fruit with Guignardia citricarpa, the causal agent of citrus black spot

Citrus black spot (CBS) is a fungal disease, caused by Guignardia citricarpa, that has a high economic impact on citrus. Although G. citricarpa has been associated with black spot of citrus, an adequate pathogenicity test is still not available. Thus, our objective was to develop and evaluate a simple, safe, and practical pathogenicity test. We used fruits from Pera-Rio and Valencia sweet orange trees from two different orchards, located in the State of São Paulo, Brazil. Inoculation was performed by placing six disks colonized by G. citricarpa, onto the peel of healthy fruits, previously bagged. In the Pera-Rio sweet orange grove, initial symptoms of the false melanose type resulting from the inoculations were observed 55 days after inoculation (dai). In the Valencia grove, initial symptoms also of the false melanose type resulting from the inoculations occurred 73 dai. A total of 92.8% and 86.6% of the Pera Rio and Valencia fruits inoculated, respectively, showed symptoms of CBS. Citrus black spot symptoms were not observed in any of the control fruits.

A possible way to relate the covariantization and the negative dimensional integration method in the light-cone gauge

Here we present a possible way to relate the method of covariantizing the gauge-dependent pole and the negative dimensional integration method for computing Feynman integrals pertinent to the light-cone gauge fields. Both techniques are applicable to the algebraic light-cone gauge and dispense with prescriptions to treat the characteristic poles.

A method for Colletotrichum graminicola inoculation in maize stalks.

A podridão do colmo do milho causada por Colletotrichum graminicola causa perdas severas em lavouras de milho. Estudos com resistência de plantas e variabilidade genética do patógeno são necessários para o desenvol-vimento de estratégias de manejo desta doença. Por outro lado, há ausência de uma metodologia adequada para a inoculação de C. graminicola em colmos. O objetivo principal do trabalho foi estabelecer uma metodologia confiável e prática para a inoculação de C. graminicola. Foram avaliados três métodos de inoculação em colmo: palitos de dente colonizados por micélio; palitos de dente imersos em suspensão de conídios; e injeção de suspensão de conídios. Nós também determinamos o efeito da posição do entrenó inoculado, o estádio fenológico para a inoculação e o período de tempo ideal após a inoculação para avaliar a severidade da doença. O método de palitos de dente imersos em suspensão de conídios inoculado no terceiro entrenó no estádio fenológico de pendoamento (VT) e avaliado aos 30 dias após a inoculação obteve o melhor resultado. A metodologia foi validada em plantas cultivadas em condições de campo.

Padronização de um método para mensuração das tábuas ósseas vestibular e lingual dos maxilares na Tomografia Computadorizada de Feixe Cônico (Cone Beam)

INTRODUÇÃO: a espessura das tábuas ósseas que recobrem os dentes por vestibular e lingual constitui um dos fatores limitantes da movimentação dentária. O avanço tecnológico em Imaginologia permitiu avaliar detalhadamente essas regiões anatômicas por meio da utilização da tomografia computadorizada de feixe cônico (TCFC). OBJETIVO: descrever e padronizar, pormenorizadamente, um método para mensuração das tábuas ósseas vestibular e lingual dos maxilares nas imagens de tomografia computadorizada de feixe cônico. METODOLOGIA: a padronização digital da posição da imagem da face deve constituir o primeiro passo antes da seleção dos cortes de TCFC. Dois cortes axiais de cada maxilar foram empregados para a mensuração da espessura do osso alveolar vestibular e lingual. Utilizou-se como referência a junção cemento-esmalte dos primeiros molares permanentes, tanto na arcada superior quanto na inferior. RESULTADOS: cortes axiais paralelos ao plano palatino foram indicados para avaliação quantitativa do osso alveolar na maxila. Na arcada inferior, os cortes axiais devem ser paralelos ao plano oclusal funcional. CONCLUSÃO: o método descrito apresenta reprodutibilidade para utilização em pesquisas, assim como para a avaliação clínica das repercussões periodontais da movimentação dentária, ao permitir a comparação de imagens pré e pós-tratamento.