Biodegradability of commercial and weathered diesel oils

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A influência da presença de ferro endógeno de solos brasileiros na remediação de diesel via reagente de Fenton modificado

Os Processos Oxidativos Avançados (POA) surgem como uma tecnologia eficiente para a remediação de áreas contaminadas com óleos, permitindo em muitos casos a completa degradação de uma grande variedade de compostos orgânicos recalcitrantes. Dentre os POA, o reagente de Fenton se destaca por sua simplicidade operacional e tecnologia eficiente para grande carga orgânica, assim como, envolve tempo e custo de processos reduzidos. A literatura reporta uma variedade de trabalhos envolvendo remediação de solos arenosos por POA. Estes resultados não devem ser aplicados diretamente para remediar solos brasileiros devido à variedade dos tipos de petróleo e à grande extensão do território brasileiro rico em diferentes tipos de solos predominantemente argilosos. Dessa forma, é de extrema importância o profundo conhecimento de avaliação e indicação de uma forma de se remediar o solo com condições menos agressivas evitando assim a sua desertificação. Dessa forma, este trabalho tem como objetivo avaliar a eficiência do teor e da forma do ferro endógeno na remediação do tipo Fenton em diferentes amostras de solos brasileiros contaminados com óleo diesel. Dez diferentes tipos de solos brasileiros: argissolo (Arg), chernossolo (Che), latossolo vermelho (LV), latossolo amarelo (LA), latossolo vermelho e amarelo (LVA), latossolo férrico (LE), neossolo (NeQ), organossolo (Org), solonchak (Soc), vertissolo (Ver). Os teores das diferentes formas de ferro endógenos (amorfo, cristalino, biodisponível e total) foram determinados pela extração por ditionito-citrato-bicarbonato de sódio (Fe-CDB), extração com oxalato ácido de amônio (Fe-oxalato), extração com ácido sulfúrico (Fe2O3-AS) e extração com solução de ácido dietileno triamino pentacético (Fe-DTPA), respectivamente. A avaliação da eficiência de oxidação pela dosagem de H2O2 e a forma de ferro disponível, assim como a sua quantidade, foi avaliada segundo correlação de Pearson. Verificou-se que a maioria dos solos argilosos tropicais (LV, LE, LA), mesmo apresentando uma grande quantidade de óxido de ferro cristalino (Fe-DCB) comparados aos solos tipo arenosos (NeQ, Org, Soc), apresentaram resultados de remediação semelhantes aos solos arenosos. Além disso, não foi observada uma correlação linear entre a quantidade de óxido de ferro cristalino e a eficiência da remediação, porém sugere-se que a elevada quantidade de óxido de ferro cristalino (Fe-DCB) adsorva os íons ferro da solução. O LVA foi o solo que apresentou a maior eficiência de remediação, independente da adição ou não de ferro. Este resultado foi atribuído à sua maior quantidade de ferro amorfo (Fe-oxalato). A tentativa de se correlacionar a remediação com algumas propriedades dos solos demonstrou que a correlação com pH, sem considerar o solonchack (Soc) é a que apresenta maior significância, ou seja, é o pH do solo que parece influenciar o grau de diferenciação das remediações com ou sem adição de ferro. Em solos mais arenosos, a eficiência da remediação com a adição de ferro exógeno foi mais significativa do que a observada para os solos argilosos.

A review on oil sardine 3. Oil and meal industry

The author reviews the advances in the oil and meal industries related to the oil sardine fishery (Sardinella longiceps) since the 1920s. Data on the production of by-produced produced in Kerala over the period 1964- 69 are tabulated. Details of the properties of the commercial oil are given, and the values compared to those for other similar oils. The use of oil sardine for industrial purposes - the oil has been used to cure leather, temper metals and as fungicides or insecticides - and the production of fish meal and fish protein concentrate is considered.

Studies on the Composition and Structure of Palm Oil Glycerides

During the last couple of decades, the oil palm has emerged as the second largest source of edible oil in the world. Recently oil palm has been introduced commercially in India to augment edible oil supply in the country. Currently, about 10,000 hectares are under oil palm cultivation in India, and it is envisaged to cover about 6 lakh hectares in the coming years. Though oil palm is a major commercial oil crop, not much basic information on the lipids of the fruit (the source of palm oil) is available even where oil palm is cultivated in a very large scale. Being a new crop to India, it is of paramount importance to understand the basic chemistry/biochemistry of the lipids, which in turn, may find practical applications in the area of processing and product development. The present investigation entitled "Studies on the Composition and Structure of Palm Oil Glycerides" was designed with a view to elucidate the lipid composition and structure under conditions such as fruit development and processing.

Avaliação energética de um sistema de refrigeração por absorção utilizando gás de aterro e gás natural

The current technological development made by the absorption refrigeration system is an economic and ambient alternative in comparison to the vapor cycle, possessing an advantage that uses thermal energy that is less noble. Chillers of absorption are used widely in the air conditioned industries, because they can be set in motion through hot water vapors that burn natural gas, solar energy, biomasses amongst others instead of electricity. These systems allow it to reduce the tips of electric demand and balance the rocking of energy demand. This work has had a main objective to simulate a absorption refrigeration cycle with lithium-water bromide solution using biogas of sanitary landfill, and mixtures of this with natural gas. These results shown to the energy viability of the system burning biogas and its mixtures with natural gas in the generator, when compared with equipments that uses traditional fuels (natural gas, oil diesel, amongst others), for operation the commercial chillers with 15 kW of the refrigeration capacity and temperature of the water in the entrance of 14°C and the exit of 7°C.

Novel method for the determination of water content and higher heating value of pyrolysis oil

This research provides a novel approach for the determination of water content and higher heating value of pyrolysis oil. Pyrolysis oil from Napier grass was used in this study. Water content was determined with pH adjustment using a Karl Fischer titration unit. An equation for actual water in the oil was developed and used, and the results were compared with the traditional Karl Fischer method. The oil was found to have between 42 and 64% moisture under the same pyrolysis condition depending on the properties of the Napier grass prior to the pyrolysis. The higher heating value of the pyrolysis oil was determined using an oil-diesel mixture, and 20 to 25 wt% of the oil in the mixture gave optimum and stable results. A new model was developed for evaluation of higher heating value of dry pyrolysis oil. The dry oil has higher heating values in the range between 19 and 26 MJ/kg. The developed protocols and equations may serve as a reliable alternative means for establishing the actual water content and the higher heating value of pyrolysis oil.

Mechanistic study on spraying of blended biodiesel using phase Doppler anemometry

Droplet size and dynamics of blended palm oil-based fatty acid methyl ester (FAME) and diesel oil spray were mechanistically investigated using a phase Doppler anemometry. A two-fluid atomizer was applied for dispersing viscous blends of blended biodiesel oil with designated flow rates. It was experimentally found that the atomizer could generate a spray with large droplets with Sauter mean diameters of ca. 30 mm at low air injection pressure. Such large droplets traveled with a low velocity along their trajectory after emerging from the nozzle tip. The viscosity of blended biodiesel could significantly affect the atomizing process, resulting in the controlled droplet size distribution. Blended biodiesel with a certain fraction of palm oil-based FAME would be consistently atomized owing to its low viscosity. However, the viscosity could exert only a small effect on the droplet velocity profile with the air injection pressure higher than 0.2 MPa.

Aplicação de ultrassons no deslocamento de petróleo em meio poroso

The objective of this study was to evaluate the displacement of petroleum/diesel solutions, at different concentrations, observing the effect of ultrasonic vibrations in fluids present in porous media to obtain an increase in oil production. The bubbles produced by ultrasound implode asymmetrically in the rock, generating liquid jets with high speed, displacing the oil present in porous media. The oil/diesel solutions were prepared with concentrations ranging from 20 g/L to 720 g/L in oil in relation to diesel and its viscosities were obtained in a Brookfield Rheometer RS2000, with temperature ranging from 25 to 55 °C. After, calculations were performed to obtain the activation energy data for oil/diesel solutions. For oil recovery experiments, cylindrical samples of porous rock (core samples), with resin around the perimeter and its two circular bases free to allow the passage of fluids, were first saturated with 2% KCl solution and after with oil solutions. The results of oil extraction were satisfactory for all studied solutions, being obtained up to 68% partial displacement with saline solution injection. The ultrasound system was used after saline injection, increasing oil displacement, with oil extractions ranging from 63% to 79%. During the experiments, it was observed the warming of core samples, helping to reduce the viscosity of more concentrated systems, and consequently enhancing the percentage of advanced recovery for all studied solutions

Extração supercrítica do óleo de linhaça: construção do extrator, estudo de parâmetros de processo, avaliação química e antioxidante do produto

The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils

Potencialidade energética em diferentes extratores e tempos de extração do óleo de pinhão-manso (jatropha curcas l.) em soxletter

The current rhythm of petroliferous exploration is esteem that the existing reserves will be depleted in next the 45 years. Thus being, it has that to study intensely, what it has come to be fact, the alternative power plants, as well as the technologies economically capable to ultilizar them. The potential demand of biodiesel for 2020 is taken in consideration that, in accordance with the International Agency of Energia (AIE), in only eight countries, will jump of 34,7 million tons in 2010 for 133,8 million in 2020, with an increment next to 300%. The tame nut is a producing oil plant with all the qualities necessary to be transformed into oil diesel. Beyond perennial and of easy culture, it presents good conservation of the harvested seed, being able to become great producer of substance cousin as optional fuel source. For these authors, this is a culture that can be developed in the small properties, with the available familiar man power, being plus a source of income for the country properties of the Northeast Region. The objective of this work is to evidence the capacity of oil production of the nut-bellwether, and the quality of extration with hexano and methanol in 6 distinct times.

Análise econômica do uso de célula a combustível para acionamento de ônibus urbano

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uso da oxi-combustão em equipamentos convencionais como alternativa a queima com ar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Assessing Bacillus subtilis biosurfactant effects on the biodegradation of petroleum products

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Abacate (Persea americana Mill.) na alimentação de cabras: produção, composição e perfil de ácidos graxos no leite e parâmetros ruminais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Screening the toxicity and biodegradability of petroleum hydrocarbons by a rapid colorimetric method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)