Economic well-being and poverty among the elderly: an analysis based on a collective consumption model

We apply the collective consumption model of Browning, Chiappori and Lewbel (2006) to analyse economic well-being and poverty among the elderly. The model focuses on individual preferences, a consumption technology that captures the economies of scale of living in a couple, and a sharing rule that governs the intra-household allocation of resources. The model is applied to a time series of Dutch consumption expenditure surveys. Our empirical results indicate substantial economies of scale and a wifeís share that is increasing in total expenditures. We further calculated poverty rates by means of the collective consumption model. Collective poverty rates of widows and widowers turn out to be slightly lower than traditional ones based on a standard equivalence scale. Poverty among women (men) in elderly couples, however, seems to be heavily underestimated (overestimated) by the traditional approach. Finally, we analysed the impact of becoming a widow(er). Based on cross-sectional evidence, we find that the drop (increase) in material well-being following the husbandís death is substantial for women in high (low) expenditure couples. For men, the picture is reversed.

An Afriat theorem for the collective model of household consumption

We provide a nonparametric 'revealed preference’ characterization of rational household behavior in terms of the collective consumption model, while accounting for general (possibly non-convex) individual preferences. We establish a Collective Axiom of Revealed Preference (CARP), which provides a necessary and sufficient condition for data consistency with collective rationality. Our main result takes the form of a ‘collective’ version of the Afriat Theorem for rational behavior in terms of the unitary model. This theorem has some interesting implications. With only a finite set of observations, the nature of consumption externalities (positive or negative) in the intra-household allocation process is non-testable. The same non-testability conclusion holds for privateness (with or without externalities) or publicness of consumption. By contrast, concavity of individual utility functions (representing convex preferences) turns out to be testable. In addition, monotonicity is testable for the model that assumes all household consumption is public.

A simplified energy consumption model for fiber-based Next Generation Access Networks

ICTs account nowadays for 2% of total carbon emissions. However, in a time when strict measures to reduce energyconsumption in all the industrial and services sectors are required, the ICT sector faces an increase in services and bandwidth demand. The deployment of NextGenerationNetworks (NGN) will be the answer to this new demand and specifically, the NextGenerationAccessNetworks (NGANs) will provide higher bandwidth access to users. Several policy and cost analysis are being carried out to understand the risks and opportunities of new deployments, though the question of which is the role of energyconsumption in NGANs seems off the table. Thus, this paper proposes amodel to analyze the energyconsumption of the main fiber-based NGAN architectures, i.e. Fiber To The House (FTTH) in both Passive Optical Network (PON) and Point-to-Point (PtP) variations, and FTTx/VDSL. The aim of this analysis is to provide deeper insight on the impact of new deployments on the energyconsumption of the ICT sector and the effects of energyconsumption on the life-cycle cost of NGANs. The paper presents also an energyconsumption comparison of the presented architectures, particularized in the specific geographic and demographic distribution of users of Spain, but easily extendable to other countries.

Energy/power consumption model for an embedded processor board

This dissertation, whose research has been conducted at the Group of Electronic and Microelectronic Design (GDEM) within the framework of the project Power Consumption Control in Multimedia Terminals (PCCMUTE), focuses on the development of an energy estimation model for the battery-powered embedded processor board. The main objectives and contributions of the work are summarized as follows: A model is proposed to obtain the accurate energy estimation results based on the linear correlation between the performance monitoring counters (PMCs) and energy consumption. the uniqueness of the appropriate PMCs for each different system, the modeling methodology is improved to obtain stable accuracies with slight variations among multiple scenarios and to be repeatable in other systems. It includes two steps: the former, the PMC-filter, to identify the most proper set among the available PMCs of a system and the latter, the k-fold cross validation method, to avoid the bias during the model training stage. The methodology is implemented on a commercial embedded board running the 2.6.34 Linux kernel and the PAPI, a cross-platform interface to configure and access PMCs. The results show that the methodology is able to keep a good stability in different scenarios and provide robust estimation results with the average relative error being less than 5%. Este trabajo fin de máster, cuya investigación se ha desarrollado en el Grupo de Diseño Electrónico y Microelectrónico (GDEM) en el marco del proyecto PccMuTe, se centra en el desarrollo de un modelo de estimación de energía para un sistema empotrado alimentado por batería. Los objetivos principales y las contribuciones de esta tesis se resumen como sigue: Se propone un modelo para obtener estimaciones precisas del consumo de energía de un sistema empotrado. El modelo se basa en la correlación lineal entre los valores de los contadores de prestaciones y el consumo de energía. Considerando la particularidad de los contadores de prestaciones en cada sistema, la metodología de modelado se ha mejorado para obtener precisiones estables, con ligeras variaciones entre escenarios múltiples y para replicar los resultados en diferentes sistemas. La metodología incluye dos etapas: la primera, filtrado-PMC, que consiste en identificar el conjunto más apropiado de contadores de prestaciones de entre los disponibles en un sistema y la segunda, el método de validación cruzada de K iteraciones, cuyo fin es evitar los sesgos durante la fase de entrenamiento. La metodología se implementa en un sistema empotrado que ejecuta el kernel 2.6.34 de Linux y PAPI, un interfaz multiplataforma para configurar y acceder a los contadores. Los resultados muestran que esta metodología consigue una buena estabilidad en diferentes escenarios y proporciona unos resultados robustos de estimación con un error medio relativo inferior al 5%.

A Simplified Energy Consumption Model for Fibre-Based Next Generation Access Networks

Presentación realizada en el PhD Seminar del ITS 2011 en Budapest. ICTs (Information and Communication Technologies) currently account for 2% of total carbon emissions. However, although modern standards require strict measures to reduce energy consumption across all industrial and services sectors, the ICT sector also faces an increase in services and bandwidth demand. The deployment of Next Generation Networks (NGN) will be the answer to this new demand; more specifically, Next Generation Access Networks (NGANs) will provide higher bandwidth access to users. Several policy and cost analyses are being carried out to understand the risks and opportunities of new deployments, but the question of what role energy consumption plays in NGANs seems off the table. Thus, this paper proposes a model to analyse the energy consumption of the main fibre-based NGAN architectures: Fibre To The House (FTTH), in both Passive Optical Network (PON) and Point-to-Point (PtP) variations, and FTTx/VDSL. The aim of this analysis is to provide deeper insight on the impact of new deployments on the energy consumption of the ICT sector and the effects of energy consumption on the life-cycle cost of NGANs. The paper also presents an energy consumption comparison of the presented architectures, particularised to the specific geographic and demographic distribution of users of Spain but easily extendable to other countries.

Nonparametric tests of collectively rational consumption behavior: an integer programming procedure

We present an IP-based nonparametric (revealed preference) testing procedure for rational consumption behavior in terms of general collective models, which include consumption externalities and public consumption. An empirical application to data drawn from the Russia Longitudinal Monitoring Survey (RLMS) demonstrates the practical usefulness of the procedure. Finally, we present extensions of the testing procedure to evaluate the goodness-of-…t of the collective model subject to testing, and to quantify and improve the power of the corresponding collective rationality tests.

Extending private-collective innovation: a case study

The private-collective innovation model proposes incentives for individuals and firms to privately invest resources to create public goods innovations. Such innovations are characterized by non-rivalry and non-exclusivity in consumption. Examples include open source software, user-generated media products, drug formulas, and sport equipment designs. There is still limited empirical research on private-collective innovation. We present a case study to (1) provide empirical evidence of a case of private-collective innovation, showing specific benefits, and (2) to extend the private-collective innovation model by analyzing the hidden costs for the company involved. We examine the development of the Nokia Internet Tablet, which builds on both proprietary and open source software development, and that involves both Nokia developers and volunteers who are not employed by the company. Seven benefits for Nokia are identified, as are five hidden costs: difficulty to differentiate, guarding business secrets, reducing community entry barriers, giving up control, and organizational inertia. We examine the actions taken by the management to mitigate these costs throughout the development period.

eHealth-as-a-Service (eHaaS) : towards universal stakeholder engagement

With the introduction of the Personally Controlled Health Record (PCEHR), the Australian public is being asked to accept greater responsibility for their healthcare by taking an active role in the management of personal health information. Although well designed, constructed and intentioned, policy and privacy concerns have resulted in an eHealth model that may impact future health sharing requirements. Hence, as a case study for a consumer eHealth initative in the Australian context, eHealth-as-a-Service (eHaaS) serves as a disruptive step in in the aggregation and transformation of health information for use as real-world knowledge. The strategic value of extending the community Health Record Bank (HRB) model lies in the ability to automatically draw on a multitude of relevant data repositories and sources to create a single source of the truth and to engage market forces to create financial sustainability. The opportunity to transform the beleaguered Australian PCEHR into a realisable and sustainable technology consumption model for patient safety is explored. Moreover, the current clerical focus of healthcare practitioners acting in the role of de facto record keepers is renegotiated to establish a shared knowledge creation landscape of action for safer patient interventions. To achieve this potential however requires a platform that will facilitate efficient and trusted unification of all health information available in real-time across the continuum of care. eHaaS provides a sustainable environment and encouragement to realise this potential.

eHealth-as-a-Service (eHaaS) : the industrialisation of health informatics, a practical approach

With the introduction of the Personally Controlled Health Record (PCEHR), the Australian public is being asked to accept greater responsibility for their healthcare. Although well designed, constructed and intentioned, policy and privacy concerns have resulted in an eHealth model that may impact future health information sharing requirements. Thus an opportunity to transform the beleaguered Australian PCEHR into a sustainable on-demand technology consumption model for patient safety must be explored further. Moreover, the current clerical focus of healthcare practitioners must be renegotiated to establish a shared knowledge creation landscape of action for safer patient interventions. To achieve this potential however requires a platform that will facilitate efficient and trusted unification of all health information available in real-time across the continuum of care. As a conceptual paper, the goal of the authors is to deliver insights into the antecedents of usage influencing superior patient outcomes within an eHealth-as-a-Service framework. To achieve this, the paper attempts to distil key concepts and identify common themes drawn from a preliminary literature review of eHealth and cloud computing concepts, specifically cloud service orchestration to establish a conceptual framework and a research agenda. Initial findings support the authors’ view that an eHealth-as-a-Service (eHaaS) construct will serve as a disruptive paradigm shift in the aggregation and transformation of health information for use as real-world knowledge in patient care scenarios. Moreover, the strategic value of extending the community Health Record Bank (HRB) model lies in the ability to automatically draw on a multitude of relevant data repositories and sources to create a single source of practice based evidence and to engage market forces to create financial sustainability.

Influence of Temperature and High Electric Field on Power Consumption by Piezoelectric Actuated Integrated Structure

The influence of electric field and temperature on power consumption of piezoelectric actuated integrated structure is studied by using a single degree of freedom mass-spring-damper system model coupled with a piezoactuator. The material lead zirconate titanate, is considered as it is capable of producing relatively high strains (e.g., 3000 mu epsilon). Actuators are often subject to high electric fields to increase the induced strain produced, resulting in field dependant piezoelectric coefficient d(31), dielectric coefficient epsilon(33) and dissipation factor delta. Piezostructures are also likely to be used across a wide range of temperatures in aerospace and undersea operations. Again, the piezoelectric properties can vary with temperature. Recent experimental studies by physics researchers have looked at the effect of high electric field and temperature on piezoelectric properties. These properties are used together with an impedance based power consumption model. Results show that including the nonlinear variation of dielectric permittivity and dissipation factor with electric field is important. Temperature dependence of the dielectric constant also should be considered.

Modeling energy consumption in error-prone IEEE 802.11-based wireless ad-hoc networks

In the IEEE 802.11 MAC layer protocol, there are different trade-off points between the number of nodes competing for the medium and the network capacity provided to them. There is also a trade-off between the wireless channel condition during the transmission period and the energy consumption of the nodes. Current approaches at modeling energy consumption in 802.11 based networks do not consider the influence of the channel condition on all types of frames (control and data) in the WLAN. Nor do they consider the effect on the different MAC and PHY schemes that can occur in 802.11 networks. In this paper, we investigate energy consumption corresponding to the number of competing nodes in IEEE 802.11's MAC and PHY layers in error-prone wireless channel conditions, and present a new energy consumption model. Analysis of the power consumed by each type of MAC and PHY over different bit error rates shows that the parameters in these layers play a critical role in determining the overall energy consumption of the ad-hoc network. The goal of this research is not only to compare the energy consumption using exact formulae in saturated IEEE 802.11-based DCF networks under varying numbers of competing nodes, but also, as the results show, to demonstrate that channel errors have a significant impact on the energy consumption.

Modelling energy consumption of relay-enabled MAC protocols in ad hoc networks

To enhance the throughput of ad hoc networks, dual-hop relay-enabled transmission schemes have recently been proposed. Since in ad hoc networks throughput is normally related to their energy consumption, it is important to examine the impact of using relay-enabled transmissions on energy consumption. In this paper, we present an analytical energy consumption model for dual-hop relay-enabled medium access control (MAC) protocols. Based on the recently reported relay-enabled distributed coordination function (rDCF), we have shown the efficacy of the proposed analytical model. This is a generalized model and can be used to predict energy consumption in saturated relay-enabled ad hoc networks via energy decomposition. This is helpful in designing MAC protocols for cooperative communications and it is shown that using a relay results not only in a better throughput but also better energy efficiency.

Modeling energy consumption of dual-hop relay based MAC protocols in ad hoc networks

Given that the next and current generation networks will coexist for a considerable period of time, it is important to improve the performance of existing networks. One such improvement recently proposed is to enhance the throughput of ad hoc networks by using dual-hop relay-based transmission schemes. Since in ad hoc networks throughput is normally related to their energy consumption, it is important to examine the impact of using relay-based transmissions on energy consumption. In this paper, we present an analytical energy consumption model for dual-hop relay-based medium access control (MAC) protocols. Based on the recently reported relay-enabled Distributed Coordination Function (rDCF), we have shown the efficacy of the proposed analytical model. This is a generalized model and can be used to predict energy consumption in saturated relay-based ad hoc networks. This model can predict energy consumption in ideal environment and with transmission errors. It is shown that using a relay results in not only better throughput but also better energy efficiency. Copyright (C) 2009 Rizwan Ahmad et al.

Trajetória dos assentamentos rurais financiados pelo crédito fundiário no estado do Rio Grande do Norte: uma análise da experiência do assentamento da fazenda Paz no município de Maxaranguape/RN

The market-assisted land reform (RAAM) has been constituted as an alternative of agrarian reform funded by the Programa Nacional do Crédito Fundiário (PNCF). It is a policy of acquisition, distribution and use of Earth ideologically disseminated and funded by the World Bank in the context of productive insertion of landless workers. Accordingly, this study seeks to analyze the trajectory of rural settlements financed by this policy, seeking to understand what factors promote or limit the process of rural development of those settlements. To do so, take as a reference case study of the Assentamento da Fazenda Paz, in the municipality of Maxaranguape in the State of Rio Grande do Norte. From the methodological point of view, bibliographical and documentary research were used, in addition to visits to the settlement and semi-structured interviews with the settlers, trade union leaders, consultants and technicians linked to the project. Assuming the reports of respondents, initially constructs the hypothesis that informal and formal institutions present in the Assentamento da Fazenda Paz were unable to effectively coordinate the actions of the agents. The results obtained showed the existence of a very complex undertaking, with a total area of 607 hectares and 80 families settled, endowed with good quality water and irrigation infrastructure, with assets of approximately R$ 5 million reais. Experience experienced by the settlers understood the development of complex systems of production and marketing of fruits and vegetables, with an emphasis on the cultivation of papaya in an area of 45 hectares based on modern irrigation system and extensive use of technology. Collective management of production, marketing, revenue and costs stood out as a major challenge for the settlers and their representative organisations, i.e. the Community Association and the cooperative. From this observation it was possible to identify two moments on the trajectory of the project: the first, between 2007-2011, considered by respondents as successful, in which the integration of public policies and abundant input of revenue from the commercialization of the fruits da Paz, mainly through the sale of papaya and pineapple in national and international markets, allowed an average remuneration of R$ 800.00 reais to R$ 1,000 reais seated/monthIn addition to the production of vegetables and other types of products for sale and consumption; the second, from 2012, characterized as a failure, due to the discontinuity of the cultivation, production and marketing of fruits based on the collective bargaining model deployed. Important factors explain the discontinuity of the project, including the model of agriculture implemented, difficulties related to the management of production, marketing and finance the venture, in addition to the breach of trust between the Board of the cooperative and the associates and the distancing of the governmental organizations more directly responsible for the project. It is therefore concluded that we must to rethink rural development as a multidimensional phenomenon, requiring a broad engagement between State and society under the foundations of a territorial development contract