Behaviour of displacement, cast-in-place piles on collapsible soil

The paper presents the results of instrumented compression load tests carried out in three uncased cast-in-place piles (pounded piles, called apiloadas in Brazil) which is largely used in interior part of the state of São Paulo. The tests were conducted with the soil in the natural condition and after soaking with water, before loading, in order to evaluate the influence of the soil collapsibility in the results. The values of the ultimate loads (total, point and lateral loads) obtained in the tests are presented and compared with the values predicted by empirical methods that utilize SPT and CPT results.

Loess as a Collapsible Soil: Some Basic Particle Packing

Loess is the most important collapsible soil; possibly the only engineering soil in which real collapse occurs. A real collapse involves a diminution in volume - it would be an open metastable packing being reduced to a more closely packed, more stable structure. Metastability is at the heart of the collapsible soils problem. To envisage and to model the collapse process in a metastable medium, knowledge is required about the nature and shape of the particles, the types of packings they assume (real and ideal), and the nature of the collapse process - a packing transition upon a change to the effective stress in a media of double porosity. Particle packing science has made little progress in geoscience discipline - since the initial packing paradigms set by Graton and Fraser (1935) - nevertheless is relatively well-established in the soft matter physics discipline. The collapse process can be represented by mathematical modelling of packing – including the Monte Carlo simulations - but relating representation to process remains difficult. This paper revisits the problem of sudden packing transition from a micro-physico-mechanical viewpoint (i.e. collapse imetan terms of structure-based effective stress). This cross-disciplinary approach helps in generalization on collapsible soils to be made that suggests loess is the only truly collapsible soil, because it is only loess which is so totally influenced by the packing essence of the formation process.

Ensaios triaxiais dinamicos sobre amostras indeformadas de um solo colapsivel

Tests were carried out with samples from two depths of a vertical soil profile. The results indicate that the permanent deformation characteristics of the soil are dependent on their depth in the vertical profile and on their water content. Some practical consequences to the performance of the pavement were considered.

Caracterização geológico-geotécnica aplicada à instalação de postos de combustíveis em Rio Claro (SP)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Use of electrical resistivity to identify collapsible soils in Brazil

Three soil profiles in Ilha Solteira, Brazil were investigated to establish their potential for collapsible behavior. The soil profiles were identified using terrain evaluation techniques and simple laboratory tests. Geophysical surveys were undertaken as they are quick and relatively cheap. The results were correlated with trial pit descriptions and cone and standard penetration tests. The study has shown that electrical resistivity is a useful tool for the preliminary identification of horizons of collapsible soils, before more expensive intrusive and laboratory work is undertaken.

Use of electrical resistivity to identify collapsible soils in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The cone loading test to estimate deformability moduli of a tropical soil

The Cone Loading Test (CLT) consists of the execution of a load test on the piezocone probe in conjunction with the CPT test. The CLT yields the modulus ECLT, a parameter that can be used in the estimative of foundation settlement. It is also presented here the interpretation and the process to determine ECLT values from the stress-displacement curves obtained from cone loading tests. Several CLT tests were conducted at the experimental research site of São Paulo State University, Bauru-SP-Brazil. The geotechnical profile at the studied site is a brown to bright red slightly clayey fine sand, a tropical soil common to this region which is lateritic, unsaturated and collapsible. The results of CLT tests satisfactorily represent the behavior of the investigated soil. The penetrometric modulus ECLT for each depth was calculated considering the elastic behavior in the initial linear segment of the soil stress-strain curve. The ECLT moduli obtained for the various tests were compared to moduli obtained from PMT and DMT test results performed at same studied site. The shear modulus degradation curves obtained from the CLT tests are also presented. The comparison to PMT and DMT results indicates the CLT test is a viable complementary test to the CPT in the quest for better understanding stress-strain behavior of soils. Further, the CLT test provides a graphic visualization of the degradation of the shear modulus with increasing levels of strain. As a hybrid geotechnical test, CPT+CLT can be valuable in the investigation of non-conventional collapsible soils, whose literature lack reference parameters for the prediction of settlement in the design of foundations.

Raman spectroscopy of some complex arsenate minerals—implications for soil remediation

The application of spectroscopy to the study of contaminants in soils is important. Among the many contaminants is arsenic, which is highly labile and may leach to non-contaminated areas. Minerals of arsenate may form depending upon the availability of specific cations for example calcium and iron. Such minerals include carminite, pharmacosiderite and talmessite. Each of these arsenate minerals can be identified by its characteristic Raman spectrum enabling identification.