Geochemistry of rare earth elements in cobalt-rich crusts from the Mid-Pacific M seamount

Rare earth elements (RFEs) and major elements of 25 cobalt-rich crusts obtained from different depths of Mid-Pacific M seamount were analyzed using inductively coupled plasma-atomic emission spectrometer and gravimetric method. The results showed that they were hydrogenous crusts with average Sigma REE content of 2084.69 mu g/g and the light REE (LREE)/heavy REE (HREE) ratio of 4.84. The shale-normalized PEE patterns showed positive Ce anomalies. The total content of strictly trivalent REEs increased with water depth. The Ce content and LREE/HREE ratios in Fe-Mn crusts above 2000 in were lower than those below 2000 m. The change in RE E with water depth could be explained by two processes: adsorptive scavenging by setting matters and behaviors of REE in seawater. However, the Ce abundance took no obvious correlation with water depth reflects the constant Ce flux. The Cc in crusts existed mainly as Ce(IV), implying that the oxidative-enriching process was controlled by kinetic factors.

Geochemistry on manganese crusts from French Polynesia

The Tuamotu Archipelago in French Polynesia is a Co-rich ferromanganese crust province. The NODCO I survey (1986) provided detailed data on Co-rich crusts in this environment through the exploration of a restricted zone in the vicinity of Niau Island on the southern flank of the archipelago. This flat zone is a fossil atoll which, under the action of subsidence and tectonic movements, has collapsed to a water depth of 1000 m. The plateau is partially filled with coralline sediments. Outcrops of ferromanganese crusts, associated with rare nodules and slabs, are located on the inner side of the coral reef which bounds the ancient lagoon. The successive episodes of plateau history have been recorded in the different growth periods of the ferromanganese crusts. The crusts, nodules and slabs belong to the same morphological, mineralogical and geochemical family. Cobalt contents vary from 0.7 to 1.3%. The highest values belong to the thinnest ferromanganese crusts which are located on the flanks of the plateau. Average Ni contents are about 0.5% and Cu contents about 0.1%; Pt contents vary from 0.2 to 1.3 ppm. Platinum and Co are enriched in the outermost oxide zone of the crusts. Poorly crystallized -MnO2 is the dominant mineralogical phase. Cobalt enrichment seems to be related to -MnO2 particle size. The greatest contents are located in the finest material where the particle size is less than 0.1 m. Cobalt-rich crusts of the Niau Zone have the same characteristics as the Co-rich crusts from the Equatorial North Pacific. They differ in original setting: the reefal environment in the Niau Zone is superficial, overlying a volcanic substrate.

中太平洋海区富钴结壳地球化学特征及成因机制

本文利用ICP-AES、EPMA、X-ray衍射等测试技术以及聚类分析和因子分析等多种数理统计方法，系统地对中太平洋海区富钴结壳的元素地球化学特征、矿物组成和微观组构进行了研究，并探讨了其成因机制，获得以下主要认识： 1中太平洋海区富钴结壳类型多样，均为水成成因，其矿物相主要由锰矿物相、铁矿物相和非金属矿物相组成；富钴结壳壳层发育多种原生和次生构造类型。 2磷酸盐化作用不仅强烈改变富钴结壳元素初始含量，而且造成富钴结壳某些元素间的相关性发生改变，这些敏感型元素对可用于指示富钴结壳是否发生磷酸盐化。在不同水深段内，未磷酸盐化型富钴结壳的主要元素随经向、纬向的变化趋势相似，表明其受水体化学障、表面生产力和物质来源等环境参数控制；而随水深的变化则具有区域一致性，表明水体化学具有区域成层性。 3未磷酸盐化富钴结壳稀土元素含量和轻重稀土分馏程度随水深发生规律变化，这种变化不仅与它们在海洋中的含量和行为有关，也与海洋背景颗粒的吸附有关；铈(Ce)在富钴结壳中基本上呈4价，且动力学因素控制了其富集过程，因此Ce异常不能用于指示富钴结壳形成环境的氧化程度。 4基于富钴结壳微层呈锯齿状且同一微层生长速率不同，提出了富钴结壳在各种基底表面生长以及后继发育过程受固液界面双电层控制的发育模式。在富钴结壳整个发育过程中，经历了从贫氧环境向富氧环境的转变，但微环境则呈富氧-低氧过程的交替。 关键词： 富钴结壳；中太平洋；元素地球化学；界面双电层

Geochemistry on ferromanganese crusts and nodules from Green Bay, Lake Michigan

The differential solubility of ferromanganese oxides can lead to stratigraphic separation of iron and manganese. Results of chemical analysis of a sequence of ferromanganese nodules overlying iron-rich crusts in northern Green Bay show that selec¬tive ion transport is important in concentrating manganese and associated trace elements near the oxygenated water-sediment interface. Manganese carbonate, which cements ferromanganese nodules, occurs in dark-gray silty sands that are located adjacent to the organic-rich muds of southern Green Bay. These muds contain an average of approximately 3.5 ppm (6x10-5M) interstitial Mn with 2.8 meq/l carbonate alkalinity. Thermodynamic calculation shows that interstitial water approaches equilibrium with MnCO3 in the upper 10 cm of sediment. This carbonate has a composition (Mn73Ca22Fe5)CO3 and has been identified as rhodochrosite.

Substrate rocks of Fe-Mn crusts on the IOAN and Dalmorgeologiya Guyots

Substratum of cobalt-manganese crusts penetrated by numerous deep-sea drill holes on the IOAN and Dalmorgeologiya Guyots of Magellan Seamounts in the Pacific Ocean has been studied. Rocks have been characterized, and ferromanganese manifestations developed in the substratum in different forms have been studied in detail. They are considered to be products of deposition of water fluids arising in the volcanic pedestal and unloading on the guyot's periphery when penetrating into top parts of rocks to different degree phosphatized mainly by replacement. It is demonstrated by numerous substratum relicts and remains of organisms in them.

Lead and strontium isotopic composition of some metalliferous and pelagic sediments and basalts at DSDP Leg 70 Holes

In recent years, metalliferous sediments have been discovered overlying newly generated oceanic crust in the East Pacific, North Atlantic, Indian Ocean, Red Sea, Gulf of Aden, and elsewhere (e.g., Boström, 1973; Lalou et al., 1977; Bischoff, 1969; Boström and Fisher, 1971; Cann et al., 1977, respectively). Such material has also been recovered by drilling from sediments lying upon older oceanic crust (Boström et al., 1972, 1976; Horowitz and Cronan, 1976). Hydrothermal circulation of seawater at a spreading ridge results in the leaching of Fe, Mn, and possibly other elements from the basaltic volcanic layer and their transport and discharge into ocean bottom waters, whereupon fine-grained Fe-Mn-rich precipitates form and settle into the ambient sediment (cf. Corliss, 1971; Dasch et al., 1971; Spooner and Fyfe, 1973; Bischoff and Dickson, 1975; Heath and Dymond, 1977; Corliss et al., 1979, Edmond et al., 1979). Mn-rich crusts have also been recovered from active ridges and are inferred to have formed in the vicinity of hydrothermal discharge areas (Scott et al., 1974; Moore and Vogt, 1976; Corliss et al., 1978; Hoffert et al., 1978). The source of the trace elements in the metalliferous deposits is generally not clear. They may be derived from seawater by adsorption onto the precipitates or crusts, or from hydrothermal solutions which have leached them from the basalts. Pb, however, can be used as a geochemical tracer because of the known isotopic compositional differences between oceanic basalts and seawater. Isotopic investigations of Pb in ferruginous sediments from the East Pacific have shown that it has been derived partly or mostly from a basaltic source (Bender et al., 1971; Dasch et al., 1971; Dymond et al., 1973). In the present study, Pb isotopic analyses have been made of a suite of metalliferous sediments (nontronite, Mn-oxide crust, Mn-Fe-oxide mud), pelagic sediments, and basalts from the Galapagos mounds area. The main purposes of the Pb study were to determine the source or sources of Pb in the metalliferous sediments, and whether or not stratigraphic variations exist in the isòtopic composition of Pb in the sediments.

Chemical composition of phosphorites, Fe-Mn nodules and crusts, and basalts from the West Pacific

The monograph gives the first systematic description of ore-bearing guyots from the West Pacific. It is mostly based on data obtained in numerous expeditions of Russian vessels during 1984-1992. Ore deposits located on upper parts of all slopes and tops of the guyots include phosphorites associated with cobalt- and platinum-rich ferromanganese crusts. Location, origin and prospecting of mineral deposits are discussed on the base of new data on metallogenic factors (geodynamics, tectonics, magmatism, sedimentation and morphostructures).

Chemical and mineral compositions of bottom sediments and ferromanganese crusts and nodules near Iceland

Results of study of bottom sediments near Iceland and on the Jan Mayen Island are reported. It was found that in recent sediments chemical elements are mainly associated with pyro- and volcanoclastics. In some areas adjusted to deep-seated faults ancient iron-manganese crusts and sediments occur. They are rich in Ni, Co, V, Cu, Mo, Cd and other elements associated with endogenic matter.

Annotated record and chemical composition of ferromanganese concretions and crusts sampled from the lakes and streams of Norway

The main objective of the project was to develop a geochemical method for exploration of ores associated with granitic rocks. Fe and Mn oxidates were sampled in streambeds and lakes from 129 localities in Southeastern Norway. 65 of these localities are situated in the northern Oslo Graben. The samples were examined mineralogically and chemically by a variety of methods. Geochemical maps of the element content in oxidates show regional distribution patterns for several elements. Sampling and analysis of oxidates can be used in exploration for mineralizations such as the Skrukkelia Mo-deposit in the northern Oslo Graben. New anomalies (especially for Zn and W) have been detected. Appendix I contains a description of samples, chemical and mineralogical determinations performed on the samples, backscattered electron image-, X-ray image- and scanning electron image pictures of the oxidate preparates. Appendix II contains spectral plots, point analysis with the microprobe, X-ray diffractograms, analytical results, correlation coefficient matrix, scatterplots, frequency distributions and information on data storage. Appendix III containS maps of the element content in oxidates.

Biological sulfate reduction of a sulfate-rich industrial waste liquor using sulfate reducing bacteria

An industrial waste liquor having high sulfate concentrations was subjected to biological treatment using the sulfate-reducing bacteria (SRB) Desulfovibrio desulfuricans. Toxicity levels of different sulfate, cobalt and nickel concentrations toward growth of the SRB with respect to biological sulfate reduction kinetics was initially established. Optimum sulfate concentration to promote SRB growth amounted to 0.8 - 1 g/L. The strain of D. desulfuricans used in this study initially tolerated up to 4 -5 g/L of sulfate or 50 mg/L of cobalt and nickel, while its tolerance could be further enhanced through adaptation by serial subculturing in the presence of increasing concentrations of sulfate, cobalt and nickel. From the waste liquor, more than 70% of sulfate and 95% of cobalt and nickel could be precipitated as sulfides, using a preadapted strain of D. desulfuricans. Probable mechanisms involving biological sulfide precipitation and metal adsorption onto precipitates and bacterial cells are discussed.

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C5R'(4)(CH2)(2)PR2] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C5R'(4)(C2H4) with LiPR2. C5Et4HSiMe2CH2PMe2, was prepared from reaction of Li[C5Et4] with Me2SiCl2 followed by Me2PCH2Li. The lithium salts were reacted with [RhCl(CO)2]2,[IrCl(CO)3] or [Co-2(CO)(8)] to give [M(C5R'(4)(CH2) 2PR2)(CO)] (M = Rh, R = Et, R' = H or Me, R= Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH2)(2)PEt2)(CO)] (Cp' = C5Me4), the most electron rich of the complexes. [Rh(C5Et4SiMe2CH2PMe2)(CO)] may be a dimer. [Co-2(CO)(8)] reacts with C5H5(CH2)(2)PEt2 or C5Et4HSiMe2CH2PMe2 (L) to give binuclear complexes of the form [Co-2(CO)(6)L-2] with almost linear PCoCoP skeletons. [Rh(Cp'(CH2)(2)PEt2)(CO)] and [Rh(Cp'(CH2)(2)PPh2)(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH2)(2)PPh2)(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI2(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH2)(2)PEt2)(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt3)(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH2)(2)PEt2)I-2], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH2)(2)PEt2)(CO)].

The Electrodeposition of Copper-Cobalt Alloys

An attempt was made to deposit a 50:50 copper-cobalt alloy from various sulfate electrolytes. No true 50:50 alloy was obtained but various mixtures of cobalt and copper rich crystals were deposited.