Manejo do solo e da adubação nitrogenada na cultura de feijão de inverno e irrigado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do sistema de preparo e manejo de um latossolo vermelho nas suas propriedades físico-hídricas

The intensive use of the land for agricultural propose causes a series of modifications in attributes, which can take to soil degradation. In this context, the main goal of this research was to evaluate the influence of the soil tillage systems and management on its physical and hydric characteristics. The evaluations were carried out in July of 1999, at experimental plots of a Latossolo vermelho, a clay oxisoil, in the Faculdade de Engenharia Agrícola of the UNICAMP, at the county of Campinas, state of São Paulo. These plots were managed with the following treatments, along a period of eight years: no-tillage, chisel ploughing, conventional system with disk ploughing and revolving hoe. The evaluated physical and hydric parameters of the soil were: soil bulk density, particle density, total porosity, macro-porosity, micro-porosity, soil-water retention curve, hydraulic conductivity and basic infiltration. Significant differences were observed between the treatments on soil bulk density, infiltration, total porosity, macro-porosity and the micro-porosity. The chisel ploughing and no-tillage systems presented the higher values of soil bulk density; nevertheless in these conservationist systems were observed the higher values of basic infiltration.

Soil management system effects on N availability and tree productivity in chestnut planatations under Mediterranean conditions

Soil tillage with chisel ploughing is the conventional soil management system in chestnut stands for fruit production in Northern Portugal. A study was developed to assess the effects of three soil management systems on in situ soil N mineralization dynamics, tree nutrition status and fruit productivity, in a 50-yr old chestnut stand. The treatments were: conventional tillage with a chisel ploughing twice a year (CT), no-tillage with rainfed improved pasture with leguminous and grasses plants (NIP), and no-tillage with spontaneous herbaceous vegetation - natural pasture (NP). The CT treatment showed a strong increase of the soil N mineral concentration following soil disturbance by tillage, but the cumulative net N mineralized along the year was significantly lower (51.8 kg ha-1) than in the NIP (85.1 kg ha-1) treatment. The NP treatment (65.9 kg ha-1) did not cause a reduction in the soil N mineralization when compared to the CT treatment. The mineralization rate (g mineralized N kg-1 total N) in 2004 was about 26, 30 and 38 in the treatments CT, NP and NIP, respectively. Treatments showed different soil N dynamics, the proportion of mineralized NO3--N being lower in the NP (10-48%) than in CT and NIP treatments (53-74%). Our study indicates that no-tillage systems improve the tree nutrition status and enhance productivity

Agronomic aspects of intercropping spring or winter peas and cereals as influenced by ploughing system

Ziel der vorliegenden Arbeit war es, den Mischfruchtanbau von Sommer- oder Wintererbsen und Getreide zu bewerten und die Eignung einer flachwendenden Bodenbearbeitung im ökologischen Erbsenanbau zu ermitteln. Weiterhin war im Rahmen dieser Arbeit beabsichtigt, den Einfluss einer mechanischen Bodenbelastung zur Saat auf die Leistungsfähigkeit von Sommererbsen in Reinsaat und Gemenge nach tief- (Pflug, 25-30 cm) und flachwendender (Stoppelhobel, 7-12 cm) Bodenbearbeitung zu untersuchen. Zu diesem Zweck wurden Feldversuche mit den Versuchsfaktoren Anbauform (Sommererbsen und Hafer in Reinsaat oder Gemenge), Pflugsystem (flach- und tiefwendend), mechanische Bodenbelastung (0 t; 2,6 t; 4,6 t Hinterradlast) und Standort (Köllitsch, Trenthorst) in 2009 und 2010 durchgeführt. Der Mischfruchtanbau zweier Wintererbsen-Sorten (E.F.B. 33: normalblättrig, buntblühend; James: halbblattlos, weißblühend) nach flach- und tiefwendender Bodenbearbeitung wurde am Standort Trenthorst in den Jahren 2009/10 und 2010/11 untersucht. Zur Untersuchung der Vorfruchtwirkung wurde im Anschluss an die Wintererbsen-Versuche Winterweizen angebaut. Ein Gefäßversuch und ein Bioassay wurde ergänzend zu den Mischfruchtversuchen mit Sommererbsen durchgeführt, um die Ursachen eines unterschiedlichen Unkrautunterdrückungsvermögens in Reinsaaten und Gemenge von Sommererbsen und Hafer bestimmen zu können. Mischfruchtbestände von Erbsen und Getreide unterdrückten annuelle Unkräuter stärker als Erbsen-Reinsaaten, was insbesondere bei halbblattlosen Erbsen zu beobachten war. Die Ergebnisse weisen darauf hin, dass eine stärkere unterirdische Interaktion zwischen Kulturpflanzen und Unkräutern für die stärkere Unkrautunterdrückung in Erbsen-Hafer-Gemengen im Vergleich zu Erbsen-Reinsaaten verantwortlich war. Die flachwendende Bearbeitung führte in Sommererbsen-Reinsaaten zu einem signifikant höheren Unkrautaufkommen, wohingegen in den Erbsen-Hafer-Gemengen eine vergleichbare (Köllitsch) oder signifikant höhere (Trenthorst) Verunkrautung nach flachwendender Bearbeitung vorhanden war. In den Wintererbsen-Versuchen waren keine signifikanten Unterschiede hinsichtlich des Unkrautaufkommens zwischen den Pflugsystemen festzustellen. Der Mischfruchtanbau von Wintererbsen und Triticale reduzierte den Befall mit der Grünen Erbsenblattlaus und verbesserte die Standfestigkeit der normalblättrigen Wintererbse, wohingegen kein positiver Effekt des Mischfruchtanbaus in Hinsicht auf Auswinterungsverluste der Wintererbsen und einen Befall mit dem Erbsenwickler festgestellt werden konnte. Die Mischfruchtbestände von Sommer- oder Wintererbsen und Getreidepartnern wiesen unter der Voraussetzung, dass keine Ertragsbildungsprobleme beim Getreide auftraten, höhere Gesamterträge im Vergleich zu den entsprechenden Erbsen-Reinsaaten auf. Die Getreidepartner unterdrückten in den Mischfruchtbeständen insbesondere die halbblattlosen Erbsen. Die flachwendende Bodenbearbeitung führte im Vergleich zur tiefwendenden Bearbeitung zu einer vergleichbaren oder signifikant besseren Ertragsleistung der Rein- und Mischfruchtbestände von Erbsen und Getreide. Die mechanische Bodenbelastung hat die Ertragsleistung und die Kornqualität der Kulturen im Jahr 2009 nicht beeinflusst. Im Jahr 2010 führte die mechanische Bodenbelastung, im Gegensatz zum Hafer, zu einer Reduzierung der Erbsen-Erträge um 12,1 % (2,6 t) und 20,8 % (4,6 t). Zudem nahmen der Rohproteingehalt der Erbsen und die Gesamterträge mit zunehmender mechanischer Bodenbelastung nach tiefwendender Bodenbearbeitung kontinuierlich ab, wohingegen nach flachwendender Bearbeitung keine signifikanten Unterschiede festgestellt wurden. Der Winterweizen, der nach den Rein- und Mischsaaten von E.F.B. 33 angebaut wurde (2010/11: 35,9; 2011/12: 20,1 dt TM ha-1), war dem Winterweizen nach den Rein- und Mischsaaten von James (2010/11: 23,8; 2011/12: 16,7 dt TM ha-1) ertraglich überlegen. Während im Jahr 2010/11 kein signifikanter Unterschied der Ertragsleistung der Nachfrucht Winterweizen in den beiden Pflugsystemen festgestellt wurde, führte die flachwendende Bodenbearbeitung im Jahr 2011/12 zu signifikant geringeren Winterweizen-Erträgen (12,9 dt TM ha-1) im Vergleich zur tiefwendenden Bodenbearbeitung (20,5 dt TM ha-1). Der metabolische Energiegehalt der weißblühenden Winter- (15,2 MJ kg-1) und Sommererbsen (15,7 MJ kg-1) lag signifikant über demjenigen der buntblühenden Wintererbsen-Sorte E.F.B. 33 (13,3 MJ kg-1). Das Pflugsystem hatte nur geringe Auswirkungen auf die Kornqualität und den energetischen Futterwert.

A groove-ploughing theory for the production of mega-scale glacial lineations, and implications for ice-stream mechanics

Mega-scale glacial lineations (MSGLs) are longitudinally aligned corrugations (ridge-groove structures 6-100 km long) in sediment produced subglacially. They are indicators of fast flow and a common signature of ice-stream beds. We develop a qualitative theory that accounts for their formation, and use numerical modelling, and observations of ice-stream beds to provide supporting evidence. Ice in contact with a rough (scale of 10-10(3) m) bedrock surface will mimic the form of the bed. Because of flow acceleration and convergence in ice-stream onset zones, the ice-base roughness elements experience transverse strain, transforming them from irregular bumps into longitudinally aligned keels of ice protruding downwards. Where such keels slide across a soft sedimentary bed, they plough through the sediments, carving elongate grooves, and deforming material up into intervening ridges. This explains MSGLs and has important implications for ice-stream mechanics. Groove ploughing provides the means to acquire new lubricating sediment and to transport large volumes of it downstream. Keels may provide basal drag in the force budget of ice streams, thereby playing a role in flow regulation and stability We speculate that groove ploughing permits significant ice-stream widening, thus facilitating high-magnitude ice discharge.

Vertical distribution, size and composition of the weed seedbank under various tillage and herbicide treatments in a sequence of industrial crops

Investigations were conducted during the 2003, 2004 and 2005 growing seasons in northern Greece to evaluate effects of tillage regime (mouldboard plough, chisel plough and rotary tiller), cropping sequence (continuous cotton, cotton-sugar beet rotation and continuous tobacco) and herbicide treatment on weed seedbank dynamics. Amaranthus spp. and Portulaca oleracea were the most abundant species, ranging from 76% to 89% of total weed seeds found in 0-15 and 15-30 cm soil depths during the 3 years. With the mouldboard plough, 48% and 52% of the weed seedbank was found in the 0-15 and 15-30 cm soil horizons, while approximately 60% was concentrated in the upper 15 cm soil horizon for chisel plough and rotary tillage. Mouldboard ploughing significantly buried more Echinochloa crus-galli seeds in the 15-30 cm soil horizon compared with the other tillage regimes. Total seedbank (0-30 cm) of P. oleracea was significantly reduced in cotton-sugar beet rotation compared with cotton and tobacco monocultures, while the opposite occurred for E. crus-galli. Total seed densities of most annual broad-leaved weed species (Amaranthus spp., P. oleracea, Solanum nigrum) and E. crus-galli were lower in herbicide treated than in untreated plots. The results suggest that in light textured soils, conventional tillage with herbicide use gradually reduces seed density of small seeded weed species in the top 15 cm over several years. In contrast, crop rotation with the early established sugar beet favours spring-germinating grass weed species, but also prevents establishment of summer-germinating weed species by the early developing crop canopy.

Monitoring Ploughing Activities during Submarine Pipeline Construction on different Seabed Substrata

Máster en Oceanografía

No-tillage, Strip Tillage, Chisel Plow Tillage Trial

Farmers in central and north central Iowa are often criticized for low adoption of no-tillage. No-tillage is often faulted with cooler, wetter soils and subsequently reduced yields. An alternative to conventional tillage and no-tillage systems is strip tillage where the benefits of both may be combined.

Placement Methods of Phosphorus and Potassium for Corn and Soybean Managed with No-till and Chisel-plow/Disk Tillage

No-till management limits the incorporation of crop residue and fertilizer with soil resulting in wetter, colder soils and the accumulation of organic matter, phosphorus (P), and potassium (K) near the soil surface. Banding of P and K could be more effective than broadcast fertilization by counteracting stratification, applying nutrients in the root zone (starter effect), and minimizing reactions with the soil that may reduce their availability to plants. Therefore, this long-term study was established in 1994 to evaluate P and K fertilizer placement methods and grain yield of corn-soybean rotations managed with notill and chisel-plow/disk tillage.

Remarks on thorough draining and deep ploughing.

Mode of access: Internet.

Dacriocistorrinostomia endoscópica

A dacricistorrinostomia (DCR) endoscópica é uma técnica aceita e bem estabelecida no tratamento de obstruções distais da via lacrimal tornando seu domínio pelos otorrinolaringologistas indispensável. OBJETIVO: O objetivo desse artigo é apresentar a experiência em DCR endoscópica da Divisão de Clínica Otorrinolaringológica do Hospital das Clínicas da USP, comparando com os resultados na literatura. FORMA DE ESTUDO: clínico retrospectivo. MATERIAL E MÉTODO: Foram analisados prontuários de 17 pacientes (17 olhos), submetidos à DCR endoscópica, no período entre abril de 2001 e julho de 2004, na qual foram avaliados com relação a sexo, idade, etiologia, quadro clínico, técnica cirúrgica utilizada, uso de sonda de silicone e tempo de permanência, seguimento e as complicações observadas. RESULTADOS: Oito homens e nove mulheres, com idade variando de 29 a 79 (média: 42,64 13,1) apresentaram um seguimento médio de 15 meses. A causa principal da obstrução foi idiopática (58,8%). A epífora foi a queixa predominante. Em 6 pacientes utilizamos instrumentos motorizados, em um caso utilizamos o Laser Yag e no restante, chisel e martelo. Em todos os casos utilizamos sondas de silicone, por período médio de 7,9 semanas e o sucesso da técnica endonasal foi de 82,3%. CONCLUSÃO: A técnica endoscópica se mostrou uma técnica segura, com uma série de vantagens em relação à técnica externa e, desta forma, oftalmologistas e otorrinolaringologistas devem trabalhar em harmonia para oferecer maiores benefícios aos seus pacientes.

Studies on mosquitoes (Diptera: Culicidae) and anthropic environment: 6 - Breeding in empty conditions of rice fields in South-Eastern Brazil

Studies on culicid breeding in empty rice fields were carried out during the cultivation cycle from May to November 1993. This period corresponded to stages 1 and 2, when empty conditions prevailed. Breeding occurred in stage 1 and the first part of stage 2, corresponding respectively to fallow uncultivated and ploughing situations. No breeding was found to take place during the second part of stage 2 when transient floods and harrowing occurred. The predominant species were Aedes scapularis, Culex nigripalpus and Cx. mollis. The Pilosus Group of Culex (Melanoconion) was found at lower densities. Some epidemiological considerations are presented.

Global material analysis on phosphorus flows, supply horizon and impact assessment on phosphorus depletion

Different problems are daily discuss on environmental aspects such acid rain, eutrophication, global warming and an others problems. Rarely do we find some discussions about phosphorus problematic. Through the years the phosphorus as been a real problem and must be more discussed. On this thesis was done a global material flow analysis of phosphorus, based on data from the year 2004, the production of phosphate rock in that year was 18.9 million tones, almost this amount it was used as fertilizer on the soil and the plants only can uptake, on average, 20% of the input of fertilizer to grow up, the remainder is lost for the phosphorus soil. In the phosphorus soil there is equilibrium between the phosphorus available to uptake from the plants and the phosphorus associate with other compounds, this equilibrium depends of the kind of soil and is related with the soil pH. A reserve inventory was done and we have 15,000 million tones as reserve, the amount that is economical available. The reserve base is estimated in 47,000 million tones. The major reserves can be found in Morocco and Western Sahara, United Sates, China and South Africa. The reserve estimated in 2009 was 15,000 million tone of phosphate rock or 1,963 million tone of P. If every year the mined phosphate rock is around 22 Mt/yr (phosphorus production on 2008 USGS 2009), and each year the consumption of phosphorus increases because of the food demand, the reserves of phosphate rock will be finished in about 90 years, or maybe even less. About the value/impact assessment was done a qualitative analysis, if on the future we don’t have more phosphate rock to produce fertilizers, it is expected a drop on the crops yields, each depends of the kind of the soil and the impact on the humans feed and animal production will not be a relevant problem. We can recovery phosphorus from different waste streams such as ploughing crop residues back into the soil, Food processing plants and food retailers, Human and animal excreta, Meat and bone meal, Manure fibre, Sewage sludge and wastewater. Some of these examples are developed in the paper.

Drilling of fibre reinforced plastic laminates

The use of fibre reinforced plastics – FRP’s – in structures is under a considerable increase. Advantages of their use are related with their low weight, high strength and stiffness. The improvement of the dynamic characteristics has been profitable for aeronautics, automobile, railway, naval and sporting goods industries. Drilling is a widely used machining technique as it is needed to assemble parts in a structure. This is a unique machining process, characterized by the existence of two different mechanisms: extrusion by the drill chisel edge and cutting by the rotating cutting lips. Drilling raises particular problems that can reduce mechanical and fatigue strength of the parts. In this work, quasi-isotropic hybrid laminates with 25% of carbon fibre reinforced plies and 4 mm thickness are produced, tested and drilled. Three different drill geometries are compared. Results considered are the interlaminar fracture toughness in Mode I – GIc –, thrust force during drilling and delamination extent after drilling. A bearing test is performed to evaluate tool influence on the load carrying capacity of the plate. Results consider the influence of drill geometry on delamination. A correlation linking plate damage to bearing test results is presented.

Drilling process of composite laminates – a tool based analysis

“Drilling of polymeric matrix composites structures”