15 resultados para chalcocite
Resumo:
The object of this work has been to devise a method by which the different phases in the chalcocite-stibnite-galena ternary system may be identified. As the mineralogists have no precise methods for the identification of these phases, a hydrochloric acid-chromate trioxide staining solution was employed.
Resumo:
Located in the Paleozoic uplift along the southern margin of Tu-Ha basin in eastern Xinjiang, the newly discovered Hongshan Cu-Au deposit occurs in the superimposed Mesozoic volcanic basin upon the north section of later Paleozoic Dananhu-Tousuquan accretionary arc. Kalatage Cu-Au orebelt is controlled by NWW-trend faults, and includes Hongshan and Meiling Cu-Au deposits. The host rocks of Hongshan ore district are mainly rhyolitic-dacitic ignimbrites, whereas Cu-Au mineralization is closely related to quartz porphyry, rhyolitic porphyry and granitic porphyry. Mineralization styles are dominantly veinlet-disseminated and veinlet, occasionally stockwork. The mineral association is chalcopyrite, pyrite, bornite, chalcocite and sphalerite. The hydrothermal alteration consists of silicfication, sericitization, alunitization, pyrophylitization, illitization, hydromuscovitization, and chloritization. Hongshan Cu-Au deposit, on the edge of the desert, is one of the driest areas in eastrn Tianshan. Moreover, the highest temperature has been up to 60℃, and the average rainfall receives only 34.1mm/y. The light rainfall and rapid evaporation in the vicinity of this deposit have allowed the formation of a great variety of water-soluble sulfates. Oxidization zone of this deposit lies on the upper part of primary sulfide orebodies appearing with a depth of 50-60m, which is dominant in sulfate minerals. 1. Based on the field observation, the volcanic and sub-volcanic rock composition, hydrothermal alteration, ore structure and mineralization characteristics, this paper proposed that the Hongshan Cu-Au deposit belongs to a transitional type from high-sulfide epithermal to porphyry Cu-Au deposit, which corresponds with the typical HS-epithermal deposit such as Zijinshan Au-Cu deposit in Fujian Province, SE-China. 2. The Hongshan copper-gold deposit was controlled by the tectonic, stratum, magma activity and volcanic apparatus, whereas Au mineralization is closely related to quartz porphyry, rhyolitic porphyry and fine grained pyritization in hydrothermal activity, and Cu mineralization is closely related to quartz porphyry and hydrothermal explosive breccia. 3. Oxidation zone of Hongshan Cu-Au deposit lies on the upper part of primary sulfide orebodies deposit. 23 sulfate minerals were identified in this work. The results of samples XRD and chemical analysis were furthermore confirmed through thermal, infrared spectrum and mössbauer spectrum analysis. Among those, nine minerals as Ferricopiapite, Cuprocopiapite, Rhomboclase, Parabutlerite, Krausite, Yavapaiite, Metasideronatrite Kroehnkite and Paracoquimbite were founded in China for the first time. And Paracoquimbite was secondly reported in the world (first case reported at 1938 in Chile). 4. EPMA analysis shows that Al impurity in crystal lattice is important to polytype formation of paracoquimbite and coquimbite besides stack fault. 5. Compared with Meiling Cu-Au deposit in the same Kalatage ore belt from the characteristics of δ34S of barite, lithofacies, hydrothermal alteration and homogeneous temperature, Hongshan Cu-Au deposit belongs to the same metallogenic system of HS-epithermal type as Meiling Cu-Au deposit. But Hongshan Cu-Au deposit has less extensive alteration and shallower denudation. 6. Sulfur isotope analyses show that δ34S values of pyrites vary in the range of +1.86‰~+5.69‰, with an average of 3.70‰, mostly in the range of +1.86‰~+3.20‰, and δ34Scp<δ34Spy. Therefore ore-forming fluid of porphyry comes from mantle and was contaminated by the earth’s crust. Sulfur isotope has reached balance in ore-forming process. 7. Sulfur isotope analyses show that δ34S values of sulfates vary in the range of +2.15‰~+6.73‰, with an average of +3.74‰, mostly equals as δ34S values of primary sulfides in Hongshan Cu-Au deposit. So supergene sulfates inherit sulfur of primary sulfide. δ34S values are mostly same in different sulfates. As well as pyrite and chalcopyrite, volcanic hot spring and associated native sulfur underground also provide water medium and sulfur during the formation process of sulfate. 8. According to the EPMA of sample chalcopyrite and pyrite in Hongshan Cu-Au, the value of Cu/Ni is 0.98-34.72, mostly close to the value of 5, which shows that Hongshan deposit is a typical volcanogenic magmaic hypothermal deposit. Au and Ag, Zn, Te and Bi are positive correlation, Cu and Hg, Se, Sb are positive correlation, indicates Au and Cu don’t locate in the factor of mineralization of same mineralization groups. The reasons of gold concentration in the oxidation zone are: 1). Change of redox potential (Eh) makes gold to deposit from the liquid of mineralization zone; 2). PH is one of the most factors of gold’s deposition; 3). Soluble complex and colloid of gold can be adsorbed easily. 9. The biotite and hornblende K-Ar isotopic ages from the wall rock-quartz diorite, biotite granite and monzonite granite are 231.99±3.45Ma, 237.97±2.36Ma and 296.53±6.69Ma respectively. The ore-bearing rhyolitic breccia lava contains breccia of the biotite granite which indicates the volcanism and related Cu-Au mineralization occurred later than the granite, possibly in Mesozoic. K-Ar ages of granitoids in Sanya, Baishiquan and Hongliugou area and Molybdenite Re-Os age of Baishan Mo deposit all are in Triassic. Besides late Paleozoic magmatism, igneous magmatic event of Mesozoic was widespread in eastern Tianshan. 10. The K-Ar age dating indicates that the K-Ar age of Voltaite occurred below surface 1m is 56.02±3.98Ma, K-Ar age of Ferricopiapite occurred below surface 1.5m is 8.62±1.12Ma, K-Ar age of Yavapaiite occurred below surface 14 m is 4.07±0.39Ma, and K-Ar age of Voltaite occurred below surface 10 m is 14.73±1.73Ma. So the age interval of oxidation zone of Hongshan copper-golden bed is between 60 -3.38Ma. Oxidization occurred at Caenozoic era (from 65Ma), which can be identified through comparing with different deposits oxidation zone in other countries. The coupling between global tectonic event and climatic change event which occur from Caenozoic era has some effect on epigeosphere system, which can act on the surface of bed oxidation zone similarly. It induces that the age mentioned above coincide with collision of India-Asia and multistage uplifting of Qinhai-Tibet Plateau happened subsequently. Bed oxidation zone is the effect and record of collision and uplifting of Tibet Plateau. The strong chemical weathering of surface accumulation to which was leaded by PETM event occurred Paleocene and Eocene is the reason of Voltaite sharply rises. On the contrary, Ferricopiapite formed due to the global cold weather. The predecessor did much research through biota, isotopes, susceptibility, but this paper try to use different sulfate mineral instead of climatic change. So the research of sulfate minerals not only indicates a great deal of oxidized zone feature, but also the intergrowth of sulfate minerals may be used to trace paleoenviroment and paleoclimate of oxidation zone. 11. Analysis of the information of alteration and mineralization features of four bore cores, induced activity polarization well logging and Eh-4 geophysical section, deep mineralization anomaly objects of Hongshan ore districts shows low resistance, middle and high polarization, measurements of Eh-4 consecutive conductance section show the existing of concealed porphyry ore body deeper than 450m, on the top of and around rock body there are low resistance body ranged from 100-300Ω•m, this area may be the ore-bearing part. In a word, Hongshan Cu-Au deposit deposit is a combine of upper HS-style epithermal Au deposit and deeper porphyry mineralization system. It has great potential to find large HS-style epithermal-porphyry Au-Cu deposits. This paper consists of seven chapters and twenty seven sections. The geological character of deposit is basic condition in this work. Constitute of oxidation zone, research of sulfate mineral, relation between oxidation and primary zone, K-Ar ages of potassic sulfate are key parts of thesis. Genesis of ore deposit is the further expansion of this research. Analysis of ore-controlling factors is the penetration above basic. Analysis of potential is application of exploration.
Resumo:
Presently non-commercial occurrences of Mississippi Valley-type ore assemblages in the Middle Silurian strata of the Niagara Peninsula have been studied. Based on this detailed study, a new poly-stage genetic model is proposed which relates ore mineralization in carbonate environments to the evolution of the sedimentary basin. Sulphide ore mineralization occurred during two episodes: 1. During the late diagenesis stage, which is characterized by compaction-maturation of the sediments, the initial mineralization took place by upward and outward movement of connate waters. Metals were probably supplied from all the sediments regardless of their specific lithologies. However, clay minerals were possibly the main contributors. The possible source of sulphur was from petroleum-type hydrocarbons presently mixed with the sediments at the site of ore deposition. Evidence for this is the fact that the greatest abundance of ore minerals is in petroliferous carbonates. The hydrocarbons probably represent liquids remaining after upward migration to the overlying Guelph-Salina reservoirs. The majority of sphalerite and galena formed during this period, as well as accessory pyrite, marcasite, chalcopyrite, chalcocite, arsenopyrite, and pyrrhotite; and secondary dolomite, calcite, celestite, and gypsum. 2. During the presently ongoing surface erosion and weathering phase, which is marked by the downward movement of groundwater, preexisting sulphides were probably remobilized, and trace amounts of lead and zinc were leached from the host material, by groundwaters. Metal sulphides precipitated at, or below, the water table, or where atmospheric oxygen could raise the Eh of groundwaters to the point where soluble metal complexes are unstable and native sulphur co-precipitates with sphalerite and galena. This process, which can be observed today, also results in the transport and deposition of the host rock material. Breakdown of pre-existing sulphide and sulphate, as well as hydrocarbon present in the host rock, provided sulphur necessary for sulphide precipitation. The galena and sphalerite are accompanied by dolomite, calcite, gypsum, anglesite, native sulphur and possibly zincite.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O depósito cupro-aurífero Visconde está localizado na Província Mineral de Carajás, a cerca de 15 km a leste do depósito congênere de classe mundial Sossego. Encontra-se em uma zona de cisalhamento de direção WNW-ESE, que marca o contato das rochas metavulcanossedimentares da Bacia Carajás com o embasamento. Nessa zona ocorrem outros depósitos hidrotermais cupro-auríferos com características similares (Alvo 118, Cristalino, Jatobá, Bacaba, Bacuri, Castanha), que têm sido enquadrados na classe IOCG (Iron Oxide Copper-Gold), embora muitas dúvidas ainda existam quanto a sua gênese, principalmente no que diz respeito à idade da mineralização e fontes dos fluidos, ligantes e metais. O depósito Visconde está hospedado em rochas arqueanas variavelmente cisalhadas e alteradas hidrotermalmente, as principais sendo metavulcânicas félsicas (2968 ± 15 Ma), o Granito Serra Dourada (2860 ± 22 Ma) e gabros/dioritos. Elas registram diversos tipos de alteração hidrotermal com forte controle estrutural, destacando-se as alterações sódica (albita + escapolita) e sódico-cálcica (albita + actinolita ± turmalina ± quartzo ± magnetita ± escapolita), mais precoces, que promoveram a substituição ubíqua de minerais primários das rochas e a disseminação de calcopirita, pirita, molibdenita e pentlandita. Dados isotópicos de oxigênio e hidrogênio de minerais representativos desses tipos de alteração mostram que os fluidos hidrotermais foram quentes (410 – 355°C) e ricos em 18O (δ18OH2O= +4,2 a 9,4‰). Sobreveio a alteração potássica, caracterizada pela intensa biotitização das rochas, a qual ocorreu concomitantemente ao desenvolvimento de foliação milonítica, notavelmente desenhada pela orientação de palhetas de biotita, que precipitaram de fluidos com assinatura isotópica de oxigênio similar à dos estágios anteriores (δ18OH2O entre +4,8 e +7,2‰, a 355°C). Microclina e alanita são outras fases características desse estágio, além da calcopirita precipitada nos planos da foliação. A temperaturas mais baixas (230 ± 11°C), fluidos empobrecidos em 18O (δ18OH2O = -1,3 a +3,7‰) geraram associações de minerais cálcico-magnesianos (albita + epidoto + clorita ± calcita ± actinolita) que são contemporâneas à mineralização. Valores de δ18DH2O e δOH2O indicam que os fluidos hidrotermais foram inicialmente formados por águas metamórficas e formacionais, a que se misturou alguma água de fonte magmática. Nos estágios tardios, houve considerável influxo de águas superficiais. Diluição e queda da temperatura provocaram a precipitação de abundantes sulfetos (calcopirita ± bornita ± calcocita ± digenita), os quais se concentraram principalmente em brechas tectônicas - os principais corpos de minério - que chegam a conter até cerca de 60% de sulfetos. Veios constituídos por minerais sódico-cálcicos também apresentam comumente sulfetos. A associação de minerais de minério e ganga indica uma assinatura de Cu-Au- Fe-Ni-ETRL-B-P para a mineralização. Os valores de δ34S (-1,2 a +3,4‰) de sulfetos sugerem enxofre de origem magmática (proveniente da exsolução de magmas ou da dissolução de sulfetos das rochas ígneas pré-existentes) e precipitação em condições levemente oxidantes. Datação do minério por lixiviação e dissolução total de Pb em calcopirita forneceu idades de 2736 ± 100 Ma e 2729 ± 150 Ma, que indicam ser a mineralização neoarqueana e, a despeito dos altos erros, permite descartar um evento mineralizador paleoproterozoico. A idade de 2746 ± 7 Ma (MSDW=4,9; evaporação de Pb em zircão), obtida em um corpo granítico não mineralizado (correlacionado à Suíte Planalto) que ocorre na área do depósito, foi interpretada como a idade mínima da mineralização. Assim, a formação do depósito Visconde teria relação com o evento transpressivo ocorrido entre 2,76 e 2,74 Ga, reponsável pela inversão da Bacia Carajás e pela geração de magmatismo granítico nos domínios Carajás e de Transição. Esse evento teria desencadeado reações de devolatilização em rochas do Supergrupo Itacaiúnas, ou mesmo, provocado a expulsão de fluidos conatos salinos aprisionados em seus intertícios. Esses fluidos teriam migrado pelas zonas de cisalhamento e reagido com as rochas (da bacia e do embasamento) pelas quais se movimentaram durante a fase dúctil. As concentrações subeconômicas do depósito Visconde devem ser resultado da ausência de grandes estruturas que teriam favorecido maior influxo de fluidos superficiais, tal como ocorreu na formação dos depósitos Sossego e Alvo 118.
Resumo:
Ao longo do domínio de baixo grau metamórfico (porção centro-oeste) do Cinturão Araguaia, afloram dezenas de corpos máficos e/ou ultramáficos de natureza ofiolítica. Cita-se como exemplo a Suíte Ofiolítica Morro do Agostinho nos arredores da cidade de Araguacema (TO) que configura um pequeno corpo isolado que sustenta o Morro do Agostinho e encontra-se encaixado tectonicamente em metarenitos, ardósias e filitos da Formação Couto Magalhães (Grupo Tocantins). A Suíte Ofiolítica Morro do Agostinho é constituída por peridotitos serpentinizados, basaltos e cherts ferríferos todos afetados por incipiente metamorfismo. A associação de basaltos é caracterizada por um expressivo derrame submarino com estruturas em lavas almofadadas, sobrepostas aos peridotitos serpentinizados. Os basaltos foram classificados em tipos maciços e hipovítreos com esferulitos. Os basaltos maciços são homogêneos, com textura intersertal definida, essencialmente, por finas ripas de plagioclásio, clinopiroxênio e raramente olivina, calcocita e calcopirita. Os basaltos hipovítreos apresentam feições texturais formadas por ultrarresfriamento de lavas apresentando esferulitos de plagioclásio, feixes de cristais aciculares e esqueletais de clinopiroxênio e plagioclásio, e cristais com terminações tipo rabo-de-andorinha. Geoquimicamente, os basaltos revelaram natureza subalcalina toleítica, compatíveis com o tipo MORB. As razões (La/Yb)n < 1 e (La/Sm)n < 1 apontam, mais especificamente, para magmas do tipo N-MORB na evolução dessas rochas relacionadas ao ambiente de fundo oceânico. Estas rochas revelaram que nos estágios iniciais da evolução do Cinturão Araguaia houve uma fase importante de oceanização da Bacia Araguaia, com exposição de peridotitos do manto litosférico seguido de extravasamento de lavas e sedimentação de cherts e formações ferríferas bandadas em ambiente oceânico profundo. Após o preenchimento sedimentar da Formação Couto Magalhães (Grupo Tocantins), e o descolamento da litosfera oceânica, a fase tectônica principal propiciou a inversão tectônica que levou à exumação dos corpos ofiolíticos, principalmente ao longo de superfícies de cavalgamento, fragmentando-os e misturando-os tectonicamente às rochas supracrustais, acompanhado de metamorfismo regional em condições da fácies xisto verde baixo. A Suíte Ofiolítica Morro do Agostinho representa, assim, um pequeno fragmento alóctone de um segmento litosférico manto/crosta oceânica, bem preservado, do início da evolução da Bacia Araguaia, similar a outros no Cinturão Araguaia, que é um importante registro da fase de oceanização do Cinturão Araguaia, durante o Neoproterozoico.
Resumo:
The constitution of the ternary mattes CU2S-FeS-PbS has never been completely investigated. Fulton and Goodner 1) have investigated the binary mattes CU2S-FeS, CU2S-PbS, PbSFeS and have shown that the three binaries show eutectics. There has been no attempt however to draw the complete ternary diagram. The following work is intended to be a contribution toward the completion of this diagram by first of all pointing out those mattes which separate on melting into two layers, and second by determining the specific gravities of mattes of different compositions.
Resumo:
The Continental porphyry Cu‐Mo mine, located 2 km east of the famous Berkeley Pit lake of Butte, Montana, contains two small lakes that vary in size depending on mining activity. In contrast to the acidic Berkeley Pit lake, the Continental Pit waters have near-neutral pH and relatively low metal concentrations. The main reason is geological: whereas the Berkeley Pit mined highly‐altered granite rich in pyrite with no neutralizing potential, the Continental Pit is mining weakly‐altered granite with lower pyrite concentrations and up to 1‐2% hydrothermal calcite. The purpose of this study was to gather and interpret information that bears on the chemistry of surface water and groundwater in the active Continental Pit. Pre‐existing chemistry data from sampling of the Continental Pit were compiled from the Montana Bureau of Mines and Geology and Montana Department of Environmental Quality records. In addition, in March of 2013, new water samples were collected from the mine’s main dewatering well, the Sarsfield well, and a nearby acidic seep (Pavilion Seep) and analyzed for trace metals and several stable isotopes, including dD and d18O of water, d13C of dissolved inorganic carbon, and d34S of dissolved sulfate. In December 2013, several soil samples were collected from the shore of the frozen pit lake and surrounding area. The soil samples were analyzed using X‐ray diffraction to determine mineral content. Based on Visual Minteq modeling, water in the Continental Pit lake is near equilibrium with a number of carbonate, sulfate, and molybdate minerals, including calcite, dolomite, rhodochrosite (MnCO3), brochantite (CuSO4·3Cu(OH)2), malachite (Cu2CO3(OH)2), hydrozincite (Zn5(CO3)2(OH)6), gypsum, and powellite (CaMoO4). The fact that these minerals are close to equilibrium suggests that they are present on the weathered mine walls and/or in the sediment of the surface water ponds. X‐Ray Diffraction (XRD) analysis of the pond “beach” sample failed to show any discrete metal‐bearing phases. One of the soil samples collected higher in the mine, near an area of active weathering of chalcocite‐rich ore, contained over 50% chalcanthite (CuSO4·5H2O). This water‐soluble copper salt is easily dissolved in water, and is probably a major source of copper to the pond and underlying groundwater system. However, concentrations of copper in the latter are probably controlled by other, less‐soluble minerals, such as brochantite or malachite. Although the acidity of the Pavilion Seep is high (~ 11 meq/L), the flow is much less than the Sarsfield Well at the current time. Thus, the pH, major and minor element chemistry in the Continental Pit lakes are buffered by calcite and other carbonate minerals. For the Continental Pit waters to become acidic, the influx of acidic seepage (e.g., Pavilion Seep) would need to increase substantially over its present volume.
Resumo:
Basalt samples recovered during DSDP Legs 68, 69, and 70 from a 550-meter-thick section in two holes near the Costa Rica Rift (Holes 501 and 504B) were found to contain the following secondary minerals: trioctahedral and dioctahedral smectite, chlorite, mixed-layer clays, talc, hematite, pyrite, foujasite, phillipsite, analcime, natrolite, thomsonite, gyrolite, aragonite, calcite, anhydrite, chalcocite, Fe-hydrosilicate, okenite, apophyllite, actinolite, cristobalite, quartz, and magnesite. A less positive identification of bismutite was made. A mineral rich in Mn and minerals with strong reflections at 12.9 Å and 3.20 Å remain unidentified. Trioctahedral smectite replaces glass and olivine in the basalt groundmass. The other secondary minerals occur in veins. The distribution of the secondary minerals in the basalt section shows both hydrothermal and oxidizing-nonoxidizing zonation. Most of the secondary minerals formed under alkaline, nonoxidizing conditions at temperatures up to 120° C. An acidic regime probably existed in the lowest portion of basalt. Oxidative diagenesis followed nonoxidative diagenesis in the upper part of the section. Oxidative diagenesis is characterized by the absence of celadonite, rare occurrences of dioctahedral smectite, and widespread hematite and phillipsite.
Resumo:
Mineral and chemical alterations of basalts were studied in the upper part of the ocean crust using data of deep-sea drilling from D/S Glomar Challenger in the main structures of the Pacific floor. Extraction of majority of chemical elements (including heavy metals) from basalts results mainly from their interaction with heated sea water. As a result mineralized hydrothermal solutions are formed. On entering the ocean they influence greatly on ocean sedimentation and ore formation.
Resumo:
Cyclic Voltammetry experiments have been conducted on copper, iron, and chalcopyrite (CuFeS2) and compared to mass-balanced EH-pH Diagrams. Potassium ethyl xanthate (KEX) was added to solution and additional voltammetry experiments were performed to determine the surface chemistry reactions of flotation collector in solution with these minerals. The ultimate goal of this research was to investigate the possibility of xanthate chemisorption onto the chalcopyrite mineral surface. Results of the copper mineral testing confirm previous literature studies and corroborate published isotherm data. Results of the iron mineral testing showed changes in surface reactions with the addition of potassium ethyl xanthate to solution, however, these results were not attributed to the chemisorption of xanthate. Results of the chalcopyrite mineral testing indicate that the surface of the mineral oxidizes to chalcocite (Cu2S). In the presence of ethyl xanthate, small currents were observed and attributed to chemisorption of the potassium ethyl xanthate at the chalcocite surface, suggesting that the mineral's hydrophobicity is induced by more than dixanthogen. This phenomenon was found to be pH-dependent under a range of alkaline conditions (i.e., pH 7-12) at narrow potentials (i.e., 0 to -200mV).