Determination of phthalate acid esters plasticizers in plastic by ultrasonic solvent extraction combined with solid-phase microextraction using calix[4]arene fiber

Ultrasonic solvent extraction combined with solid-phase microextraction (SPME) with calix[4]arene/hydroxy-terminated silicone (C[4]/OHTSO) oil coated fiber was used to extract phthalate acid esters (PAEs) plasticizers in plastic, such as blood bags, transfusion tubing, food packaging bag, and mineral water bottle for analysis by gas chromatography (GC). Both extraction parameters (i.e. extraction time, extraction temperature, ionic strength) and conditions of the thermal desorption in a GC injector were optimized by analysis of eight phthalates. The fiber shows wonderful sensitivity and selectivity to the tested compounds. Owing to its high thermal stability (380 degreesC), the carryover effect that often encountered when using conventional fibers can be reduced by appropriately enhancing the injector temperature. The method showed linear response over two to four orders of magnitude with correlation coefficients (r) better than 0.996, and limits of detection (LOD) ranged between 0.006 and 0.084 mug l(-1). The relative standard deviation values obtained were less than or equal to 10%. bis-2-Ethylhexyl phthalate (DEHP) was the sole analyte detected in these plastics and recoveries were in the ranges 95.5-101.4% in all the samples. (C) 2004 Elsevier B.V. All rights reserved.

Randomised controlled trials of homeopathy in hyperactive children: treatment procedure leads to an unconventional study design. Experience with open-label homeopathic treatment preceding the Swiss ADHD placebo controlled, randomised, double-blind, cross-over trial

BACKGROUND: Treatment of patients with attention deficit hyperactivity disorder (ADHD) with homeopathy is difficult. The Swiss randomised, placebo controlled, cross-over trial in ADHD patients (Swiss ADHD trial) was designed with an open-label screening phase prior to the randomised controlled phase. During the screening phase, the response of each child to successive homeopathic medications was observed until the optimal medication was identified. Only children who reached a predefined level of improvement participated in the randomised, cross-over phase. Although the randomised phase revealed a significant beneficial effect of homeopathy, the cross-over caused a strong carryover effect diminishing the apparent difference between placebo and verum treatment. METHODS: This retrospective analysis explores the screening phase data with respect to the risk of failure to demonstrate a specific effect of a randomised controlled trial (RCT) with randomisation at the start of the treatment. RESULTS: During the screening phase, 84% (70/83) of the children responded to treatment and reached eligibility for the randomised trial after a median time of 5 months (range 1-18), with a median of 3 different medications (range 1-9). Thirteen children (16%) did not reach eligibility. Five months after treatment start, the difference in Conners Global Index (CGI) rating between responders and non-responders became highly significant (p = 0.0006). Improvement in CGI was much greater following the identification of the optimal medication than in the preceding suboptimal treatment period (p < 0.0001). CONCLUSIONS: Because of the necessity of identifying an optimal medication before response to treatment can be expected, randomisation at the start of treatment in an RCT of homeopathy in ADHD children has a high risk of failure to demonstrate a specific treatment effect, if the observation time is shorter than 12 months.

Optimal crossover designs for logistic regression models in pharmacodynamics

Pharmacodynamics (PD) is the study of the biochemical and physiological effects of drugs. The construction of optimal designs for dose-ranging trials with multiple periods is considered in this paper, where the outcome of the trial (the effect of the drug) is considered to be a binary response: the success or failure of a drug to bring about a particular change in the subject after a given amount of time. The carryover effect of each dose from one period to the next is assumed to be proportional to the direct effect. It is shown for a logistic regression model that the efficiency of optimal parallel (single-period) or crossover (two-period) design is substantially greater than a balanced design. The optimal designs are also shown to be robust to misspecification of the value of the parameters. Finally, the parallel and crossover designs are combined to provide the experimenter with greater flexibility.

The influence of past behavior on future behavior: a mind-set perspective

A behavioral mind-set refers to the effect of performing a behavior in one situation (e.g., deciding which animals jump higher, dolphins or sea lions) on the likelihood of performing a conceptually similar behavior in subsequent, unrelated situations (e.g., deciding which of two candies to purchase). It reflects the activation and persistence of procedural knowledge. My dissertation circumscribes the construct of a behavioral mind-set and proposes a theoretical framework describing how mind-sets operate as well as their cognitive and motivational determinants. Three sets of studies investigated the role of mind-sets in different domains. The first set of studies explored the influence of making comparative judgments on subsequent decision making. Specifically, I found that making comparative judgment in one situation activates a which-to-buy mind-set that increases the willingness to decide which of two products to purchase in a later situation without considering the option of not buying anything at all. This mind-set can be activated not only by stating preferences for one of two products but also by comparing the relative attractiveness of wild animals, comparing the animals with respect to physical attributes, and estimating how similar one object is to another. Furthermore, the mind-set, once activated, influences not only purchase intentions in hypothetical situations but the actual decisions to purchase one of different types of products that are on sale after the experiment. The second set of studies investigated whether generating supportive elaborations or counterarguments in one situation will influence people’s tendency to engage in similar behavior in a subsequent, unrelated situation. I found that making supportive elaborations in one situation gives rise to a bolstering mind-set that, once activated, increases participants’ disposition to generate supportive thoughts in response to persuasive communications that they receive later and, therefore, increases the effectiveness of persuasion. Correspondingly, generating opposing arguments in an initial situation activates a counterarguing mind-set that increases the tendency to argue against the persuasive communications and decreases its effectiveness. However, a counterarguing mind-set may increase the effectiveness of persuasion if the messages are difficult to be refuted. The third set of studies distinguished between the influence of motivation on consumer behavior and the influence of a mind-set that is activated by this motivation. Specifically, I found that appetitive motivation, which naturally increases people’s tendency to acquire food products, can give rise to a cognition-based acquisition mind-set that increases people’s disposition to acquire non-food products as well. This acquisition mind-set may persist even when the appetitive motivation that gave rise to it is satiated by eating. Moreover, the disposition to acquire non-food products is not mediated by the products’ attractiveness. The studies suggest that motivation and mind-sets may independently influence consumers’ evaluation of a product and their dispositions to acquire it. Motivation is more likely to influence product evaluations whereas a mind-set is more likely to influence consumers’ acquisition dispositions. In summary, a behavioral mind-set can be activated in the process of performing a behavior. And the mind-set may influence people’s subsequent behaviors in unrelated situations in which the activated procedure is applicable. Moreover, motivation to engage in one behavior could also elicit a cognition-based mind-set, which may change people’s subsequent behaviors.

Diet high in monounsaturated fat does not have a different effect on arterial elasticity than a low-fat, high-carbohydrate diet

Objective : To compare the effects of a modified-fat diet high in monounsaturated fat, and a low-fat/high-carbohydrate diet on arterial elasticity.
Design : Randomized crossover design; each diet period was 1 month and a 2-week wash out period occurred in between.
Subjects/setting : Thirty healthy, free-living, nonsmoking men and women were recruited from the Melbourne, Australia, metropolitan region of Australia. Men were aged 35 to 55 years and postmenopausal women were aged 50 to 60 years and were not taking hormone replacement therapy. Twenty-eight subjects completed the study.
Intervention : Two diets of equal energy value: a modified-fat diet and a low-fat/high-carbohydrate diet; the modified-fat diet had 3 times more energy from monounsaturated fat.
Main outcome measures : Arterial elasticity and serum lipoprotein concentrations.
Statistical analysis : The general linear model was used to investigate overall effect and any carryover or order effects. Paired t test and the general linear model were used to compare the results from the 2 diet periods.
Results : High-density lipoprotein cholesterol concentration was significantly higher on the modified-fat diet than on the low-fat/low-carbohydrate diet. Arterial elasticity and concentrations of total cholesterol, low-density lipoprotein cholesterol, and triglycerides were not significantly different on the 2 diets.
Applications/conclusions : There is no evidence to favor a diet high in monounsaturated fat over a low-fat/high-carbohydrate diet because of an effect on arterial elasticity. Other changes in diet may be needed to cause a beneficial effect on arterial elasticity.

Comparative analysis of experimental and modelling of gas-solid flow hydrodynamics:effect of friction and interparticle cohesion forces

The effect of friction and interparticle cohesion forces on the gas-solid flow hydrodynamics was discussed. A proposed interparticle cohesion and frictional force terms have been tested in a continuum fully developed flow model to investigate their effect on the general hydrodynamic features of vertical duct flow. It was observed that both terms have direct effect on lowering the material carryover, which implies a reduced bed expansion in freely bubbling column. The parametric analysis shows that cohesion and frictional forces are high when compared to kinetic stress and hence it can play a major role in describing the hydrodynamics features of the flow.

The Effect of Sample and Sample Matrix on DNA Processing: Mechanisms for the Detection and Management of Inhibition in Forensic Samples

The presence of inhibitory substances in biological forensic samples has, and continues to affect the quality of the data generated following DNA typing processes. Although the chemistries used during the procedures have been enhanced to mitigate the effects of these deleterious compounds, some challenges remain. Inhibitors can be components of the samples, the substrate where samples were deposited or chemical(s) associated to the DNA purification step. Therefore, a thorough understanding of the extraction processes and their ability to handle the various types of inhibitory substances can help define the best analytical processing for any given sample. A series of experiments were conducted to establish the inhibition tolerance of quantification and amplification kits using common inhibitory substances in order to determine if current laboratory practices are optimal for identifying potential problems associated with inhibition. DART mass spectrometry was used to determine the amount of inhibitor carryover after sample purification, its correlation to the initial inhibitor input in the sample and the overall effect in the results. Finally, a novel alternative at gathering investigative leads from samples that would otherwise be ineffective for DNA typing due to the large amounts of inhibitory substances and/or environmental degradation was tested. This included generating data associated with microbial peak signatures to identify locations of clandestine human graves. Results demonstrate that the current methods for assessing inhibition are not necessarily accurate, as samples that appear inhibited in the quantification process can yield full DNA profiles, while those that do not indicate inhibition may suffer from lowered amplification efficiency or PCR artifacts. The extraction methods tested were able to remove >90% of the inhibitors from all samples with the exception of phenol, which was present in variable amounts whenever the organic extraction approach was utilized. Although the results attained suggested that most inhibitors produce minimal effect on downstream applications, analysts should practice caution when selecting the best extraction method for particular samples, as casework DNA samples are often present in small quantities and can contain an overwhelming amount of inhibitory substances.

The effect of sample and sample matrix on DNA processing: Mechanisms for the detection and management of inhibition in forensic samples

The presence of inhibitory substances in biological forensic samples has, and continues to affect the quality of the data generated following DNA typing processes. Although the chemistries used during the procedures have been enhanced to mitigate the effects of these deleterious compounds, some challenges remain. Inhibitors can be components of the samples, the substrate where samples were deposited or chemical(s) associated to the DNA purification step. Therefore, a thorough understanding of the extraction processes and their ability to handle the various types of inhibitory substances can help define the best analytical processing for any given sample. A series of experiments were conducted to establish the inhibition tolerance of quantification and amplification kits using common inhibitory substances in order to determine if current laboratory practices are optimal for identifying potential problems associated with inhibition. DART mass spectrometry was used to determine the amount of inhibitor carryover after sample purification, its correlation to the initial inhibitor input in the sample and the overall effect in the results. Finally, a novel alternative at gathering investigative leads from samples that would otherwise be ineffective for DNA typing due to the large amounts of inhibitory substances and/or environmental degradation was tested. This included generating data associated with microbial peak signatures to identify locations of clandestine human graves. Results demonstrate that the current methods for assessing inhibition are not necessarily accurate, as samples that appear inhibited in the quantification process can yield full DNA profiles, while those that do not indicate inhibition may suffer from lowered amplification efficiency or PCR artifacts. The extraction methods tested were able to remove >90% of the inhibitors from all samples with the exception of phenol, which was present in variable amounts whenever the organic extraction approach was utilized. Although the results attained suggested that most inhibitors produce minimal effect on downstream applications, analysts should practice caution when selecting the best extraction method for particular samples, as casework DNA samples are often present in small quantities and can contain an overwhelming amount of inhibitory substances.^