Enzymatic activity on sediments and nematode assemblage responses during seagrass beds habitat recovery following the disturbance of the traditional digging activity of bivalves harvesting.

Sediment digging is an anthropogenic activity connected to the exploitation of living resources in estuarine and marine environments. The knowledge on the functional responses of the benthic assemblages to the physical disturbance is an important baseline to understand the ecological processes of the habitat recovery and restoration and to develop tools for the management of the harvesting activities. To investigate the effects of the digging activity of the bivalves on Zostera noltii seagrass beds a manipulative field experiment was conducted that included the enzymatic activity of sediments and the associated nematode assemblages. Four plots (two undisturbed serving as control and two dug to collect bivalves - treatment) with 18 subplots were randomly located at seagrass beds in the Mira estuary at the SW coast of Portugal. Samples were randomly and unrepeatably collected from three subplots of each plot in five different occasions, before sediment digging (T0) up to six months after disturbance (T5). Microbial activity in sediments was assess by determining the extracelular enzymatic activity of six hydrolytic enzymes (sulfatase, phosphatase, b -N-acetilglucosaminidase, b-glucosidase, urease, protease) and two oxidoreductases (phenol oxidase and peroxidase). The microbial community status was also assessed through the measurement of dehydrogenase, which reflects microbial respiration. The nematode assemblages composition, biodiversity and trophic composition at different sampling occasions were also analyzed. The fluorometric and biochemical parameters analysed of the Z. noltii plants during the experimental period showed a recovery of the seagrass beds, and it was detected an increase of the enzymatic activity of the sediments after disturbance. The nematodes assemblages were similar in all sampling occasions. The seagrass beds and the nematodes assemblages associated showed a high resilience to the stress caused by the traditional bivalves digging activity. The obtained results allow the development of a management programme for the commercial fishing activity to maintain the good environmental status and minimized the secondary environmental effects on marine and estuarine habitats through the establishment of a baseline for the regulation of the harvesting frequency.

Natural recovery of the benthic nematode assemblages associated to Zostera noltii seagrass beds after physical disturbance caused by digging harvest activity

Seagrass beds are productive ecosystems that maintain high levels of biodiversity, making them susceptible to anthropogenic pressures such as bivalve harvesting. Nematodes are considered great ecological indicators as changes in their density, diversity and structure may represent changes in the environment. This experimental fieldwork aimed to assess the impact of the bivalve harvesting on the nematodes assemblage of a seagrass bed in the Mira estuary by simulating the digging activity. Two plots were subjected to the digging (D1 and D19) and two plots were control (C11 and C18). The sampling took place in five occasions: T0 – before digging; T1 – 14 days; T2 – 45 days; T3 – 75 days; and T4 – 165 days after digging. The results showed no significant difference in the nematode assemblages’ density, diversity and trophic composition between treatments and sampling times, evidencing their high tolerance for naturally stressed environments and to the level of digging they were exposed; Recuperação natural das comunidades de nematodes bentónicos associados aos povoamentos de Zostera noltii após atividade de marisqueio Resumo: As pradarias marinhas são ecossistemas produtivos que suportam elevados níveis de biodiversidade, pelo que estão sujeitos a pressões antropogénicas. Os nematodes são bons indicadores ecológicos pois respondem rapidamente a qualquer perturbação por alterações na densidade, diversidade e estrutura. Este trabalho experimental teve como finalidade o estudo da recuperação natural das comunidades de nematodes associados aos povoamentos de Zostera noltii pela simulação da atividade de marisqueio. Dois plots foram sujeitos a revolvimento (D1 e D19) e dois plots serviram como controlo (C11 e C18) e foram efetuadas amostragens em cinco ocasiões: T0 – antes do revolvimento; T1 – 14 dias; T2 – 45 dias; T3 – 75 dias; e T4 – 165 dias após revolvimento. Os resultados obtidos não mostraram diferenças significativas na diversidade, densidade e composição trófica das comunidades de nematodes entre tratamentos e tempos de amostragem, evidenciando a sua elevada tolerância a ambientes naturalmente dinâmicos e ao nível de revolvimento a que foram expostas.

Benthic nematodes biodiversity patterns along the gradient of the Tagus estuary (Western Coast of Portugal): Link with abundances distribution pattern of the nonindigenous bivalve Ruditapes philippinarum

The non-indigenous bivalve Ruditapes philippinarum is native to the western Pacific Ocean and it has been one of the most widely introduced species for aquaculture purposes in Europe. In Portugal its presence is known in several estuaries for more than two decades and its populations have increased greatly along the last years1. Currently it’s one of the dominant benthic species in some areas of the Tagus estuary (264,1±470,8 ind./30s tow). Studies on the impacts of invasive bivalves on meiofaunal communities are scarce and restricted to the harvesting effect. Meiofauna of the Tagus estuary is poorly known and possible impacts of the introduction of R. philippinarum were never assessed.

Pollutant characteristics on roof surfaces for evaluation as a stormwater harvesting catchment

This paper presents the outcomes of a study which focused on evaluating roof surfaces as stormwater harvesting catchments. Build-up and wash-off samples were collected from model roof surfaces. The collected build-up samples were separated into five different particle size ranges prior to the analysis of physico-chemical parameters. Study outcomes showed that roof surfaces are efficient catchment surfaces for the deposition of fine particles which travel over long distances. Roof surfaces contribute relatively high pollutant loads to the runoff and hence significantly influence the quality of the harvested rainwater. Pollutants associated with solids build-up on roof surfaces can vary with time, even with minimal changes to total solids load and particle size distribution. It is postulated that this variability is due to changes in distant atmospheric pollutant sources and wind patterns. The study highlighted the requirement for first flush devices to divert the highly polluted initial portion of roof runoff. Furthermore, it is highly recommended to not to harvest runoff from small intensity rainfall events since there is a high possibility that the runoff would contain a significant amount of pollutants even after the initial runoff fraction.

Optimizing solar collector tilt angle to improve energy harvesting in a solar cooling system

Solar cooling systems are gaining popularity due to continuously increasing of energy costs around the world. However, there are still some factors that are hindering the installation of solar cooling systems on a larger scale. One being the cost associated with the solar collectors required to provide heat to the absorption chiller. This study demonstrates the possibility of reducing the number of solar panels in a residential solar cooling system based on evacuated tubes producing hot water at a low temperature (90 °C) and a water-ammonia absorption chiller.

Improved energy harvesting capability of poly(vinylidene fluoride) films modified by reduced graphene oxide

Piezoelectric energy harvesters can be used to convert ambient energy into electrical energy and power small autonomous devices. In recent years, massive effort has been made to improve the energy harvesting ability in piezoelectric materials. In this study, reduced graphene oxide was added into poly(vinylidene fluoride) to fabricate the piezoelectric nanocomposite films. Open-circuit voltage and electrical power harvesting experiments showed remarkable enhancement in the piezoelectricity of the fabricated poly(vinylidene fluoride)/reduced graphene oxide nanocomposite, especially at an optimal reduced graphene oxide content of 0.05 wt%. Compared to pristine poly(vinylidene fluoride) films, the open-circuit voltage, the density of harvested power of alternating current, and direct current of the poly(vinylidene fluoride)/reduced graphene oxide nanocomposite films increased by 105%, 153%, and 233%, respectively, indicating a great potential for a broad range of applications.

Harvesting as an alternative to burning for managing Spinifex Grasslands in Australia

Sustainable harvesting of grasslands can buffer large scale wildfires and the harvested biomass can be used for various products. Spinifex (Triodia spp.) grasslands cover ≈30% of the Australian continent and form the dominant vegetation in the driest regions. Harvesting near settlements is being considered as a means to reduce the occurrence and intensity of wildfires and to source biomaterials for sustainable desert living. However, it is unknown if harvesting spinifex grasslands can be done sustainably without loss of biodiversity and ecosystem function. We examined the trajectory of plant regeneration of burned and harvested spinifex grassland, floristic diversity, nutrient concentrations in soil and plants, and seed germination in controlled ex situ conditions. After two to three years of burning or harvesting in dry or wet seasons, species richness, diversity, and concentrations of most nutrients in soil and leaves of regenerating spinifex plants were overall similar in burned and harvested plots. Germination tests showed that 20% of species require fire-related cues to trigger germination, indicating that fire is essential for the regeneration of some species. Further experimentation should evaluate these findings and explore if harvesting and intervention, such as sowing of fire-cued seeds, allow sustainable, localised harvesting of spinifex grasslands.

Calcium phosphate flocs and the clarification of sugar cane juice from whole of crop harvesting

Sugar cane biomass is one of the most viable feedstocks for the production of renewable fuels and chemicals. Therefore, processing the whole of crop (WC) (i.e., stalk and trash, instead of stalk only) will increase the amount of available biomass for this purpose. However, effective clarification of juice expressed from WC for raw sugar manufacture is a major challenge because of the amounts and types of non-sucrose impurities (e.g., polysaccharides, inorganics, proteins, etc.) present. Calcium phosphate flocs are important during sugar cane juice clarification because they are responsible for the removal of impurities. Therefore, to gain a better understanding of the role of calcium phosphate flocs during the juice clarification process,the effects of impurities on the physicochemical properties of calcium phosphate flocs were examined using small-angle laser light scattering technique, attenuated total reflectance Fourier transformed infrared spectroscopy, and X-ray powder diffraction. Results on synthetic sugar juice solutions showed that the presence of SiO2 and Na+ ions affected floc size and floc structure. Starch and phosphate ions did not affect the floc structure; however, the former reduced the floc size, whereas the latter increased the floc size. The study revealed that high levels of Na+ ions would negatively affect the clarification process the most, as they would reduce the amount of suspended particles trapped by the flocs. A complementary study on prepared WC juice using cold and cold/intermediate liming techniques was conducted. The study demonstrated that, in comparison to the one-stage (i.e., conventional) clarification process, a two-stage clarification process using cold liming removed more polysaccharides (≤19%),proteins (≤82%), phosphorus (≤53%), and SiO2 (≤23%) in WC juice but increased Ca2+ (≤136%) and sulfur (≤200%)

A highly efficient and consistent method for harvesting large volumes of high-titre lentiviral vectors

Lentiviral vectors pseudotyped with vesicular stomatitis virus glycoprotein (VSV-G) are emerging as the vectors of choice for in vitro and in vivo gene therapy studies. However, the current method for harvesting lentivectors relies upon ultracentrifugation at 50 000 g for 2 h. At this ultra-high speed, rotors currently in use generally have small volume capacity. Therefore, preparations of large volumes of high-titre vectors are time-consuming and laborious to perform. In the present study, viral vector supernatant harvests from vector-producing cells (VPCs) were pre-treated with various amounts of poly-L-lysine (PLL) and concentrated by low speed centrifugation. Optimal conditions were established when 0.005% of PLL (w/v) was added to vector supernatant harvests, followed by incubation for 30 min and centrifugation at 10 000 g for 2 h at 4 degreesC. Direct comparison with ultracentrifugation demonstrated that the new method consistently produced larger volumes (6 ml) of high-titre viral vector at 1 x 10(8) transduction unit (TU)/ml (from about 3000 ml of supernatant) in one round of concentration. Electron microscopic analysis showed that PLL/viral vector formed complexes, which probably facilitated easy precipitation at low-speed concentration (10 000 g), a speed which does not usually precipitate viral particles efficiently. Transfection of several cell lines in vitro and transduction in vivo in the liver with the lentivector/PLL complexes demonstrated efficient gene transfer without any significant signs of toxicity. These results suggest that the new method provides a convenient means for harvesting large volumes of high-titre lentivectors, facilitate gene therapy experiments in large animal or human gene therapy trials, in which large amounts of lentiviral vectors are a prerequisite.

Optimisation-based Design of a Manipulator for Harvesting Capsicum

This paper presents a global-optimisation frame-work for the design of a manipulator for harvesting capsicum(peppers) in the field. The framework uses a simulated capsicum scenario with automatically generated robot models based on DH parameters. Each automatically generated robot model is then placed in the simulated capsicum scenario and the ability of the robot model to get to several goals (capsicum with varying orientations and positions) is rated using two criteria:the length of a collision-free path and the dexterity of the end-effector. These criteria form the basis of the objective function used to perform a global optimisation. The paper shows a preliminary analysis and results that demonstrate the potential of this method to choose suitable robot models with varying degrees of freedom.

On Visual Detection of Highly-occluded Objects for Harvesting Automation in Horticulture

Developing accurate and reliable crop detection algorithms is an important step for harvesting automation in horticulture. This paper presents a novel approach to visual detection of highly-occluded fruits. We use a conditional random field (CRF) on multi-spectral image data (colour and Near-Infrared Reflectance, NIR) to model two classes: crop and background. To describe these two classes, we explore a range of visual-texture features including local binary pattern, histogram of oriented gradients, and learn auto-encoder features. The pro-posed methods are evaluated using hand-labelled images from a dataset captured on a commercial capsicum farm. Experimental results are presented, and performance is evaluated in terms of the Area Under the Curve (AUC) of the precision-recall curves.Our current results achieve a maximum performance of 0.81AUC when combining all of the texture features in conjunction with colour information.

Can feral pig harvesting and co-ordinated control reduce damage to grain crops?

Commercial and recreational harvesting of pigs is often encouraged by pest managers because it is essentially a ‘free’ reduction in pest density. However, the reduction in numbers may provide minimal damage mitigation and may be inappropriately allocated in space and time. Additionally, more effective control (e.g. baiting) may not occur because of the incorrect perception that harvesting is effective or because pigs are valued for recreational use.