Pore space analysis of beech wood: The vessel network

Water transport in wood is vital for the survival of trees. With synchrotron radiation X-ray tomographic microscopy (SRXTM), it has become possible to characterize and quantify the three-dimensional (3D) network formed by vessels that are responsible for longitudinal transport. In the present study, the spatial size dependence of vessels and the organization inside single growth rings in terms of vessel-induced porosity was studied by SRXTM. Network characteristics, such as connectivity, were deduced by digital image analysis from the processed tomographic data and related to known complex network topologies.

A study of the cambial zone and conductive phloem of common beech (Fagus sylvatica L.) using an image analysis method. I. Influence of tree age on the structure

Quantification is a major problem when using histology to study the influence of ecological factors on tree structure. This paper presents a method to prepare and to analyse transverse sections of cambial zone and of conductive phloem in bark samples. The following paper (II) presents the automated measurement procedure. Part I here describes and discusses the preparation method, and the influence of tree age on the observed structure. Highly contrasted images of samples extracted at breast height during dormancy were analysed with an automatic image analyser. Between three young (38 years) and three old (147 years) trees, age-related differences were identified by size and shape parameters, at both cell and tissue levels. In the cambial zone, older trees had larger and more rectangular fusiform initials. In the phloem, sieve tubes were also larger, but their shape did not change and the area for sap conduction was similar in both categories. Nevertheless, alterations were limited, and demanded statistical analysis to be identified and ascertained. The physiological implications of the structural changes are discussed.

Relationship between empty seed and genetic factors in European beech (Fagus sylvatica L.)

Abstract

Effect of boric acid treatment on mechanical properties of laminated beech veneer lumber

Abstract

Spatiotemporal dynamics of soil rotifers in a South-Bohemian beech forest

The objective of this work was to determine seasonal variation and vertical distribution of the soil rotifer assemblage in a climax beech forest in South Bohemia. During 2005, soil rotifer was investigated to the species level. Soil samples of 10 cm² and 10 cm in depth were divided into five layers, which were processed separately. Thirty one rotifer species were identified during the investigation. Dominant species significantly changed throughout the seasons. The most abundant species were Encentrum arvicola and Wierzejskiella vagneri among the monogononts, and Adineta steineri, Ceratotrocha cornigera, Habrotrocha filum, Habrotrocha ligula, Macrotrachela plicata, Mniobia tentans, Mniobia incrassata and Mniobia granulosa among the bdelloids. Mean Shannon diversity index varied from 1.99 to 2.63. Total rotifer abundance varied from 212±63 to 513±127 10³ individuals m-2 along the year, with the highest numbers found in May, and the lowest in July. The great part of the community was concentrated in the upper (fresh litter) and second (partially decomposed litter) layers and significantly decreased in the soil vertical profile on all sampling dates. The highest rotifer density of 43 individuals g-1 was found in the upper layer in May.

Individual biomass factors for beech, oak and pine in Slovakia: a comparative study in young naturally regenerated stands

Biomass conversion and expansion factors (BCEF) which convert tree stem volume to whole tree biomass and biomass allocation patterns in young trees were studied in order to estimate tree and stand biomass in naturally regenerated forests. European beech (Fagus sylvatica L.), Sessile oak (Quercus petraea (Mattuschka) Liebl.) and Scots pine (Pinus sylvestris L.) stands were compared. Seven forest stands of each species were chosen to cover their natural distribution in Slovakia. Species specific BCEF are presented, generally showing a steep decrease in all species in the smallest trees, with the only exception in the case of branch BCEF in beech which grows with increasing tree size. The values of BCEF for all tree compartments stabilise in all species once trees reach about 60-70mm diameter at base. As they grow larger, all species increase their allocation to stem and branches, while decreasing the relative growth of roots and foliage. There are, however, clear differences between species and also between broadleaves and conifers in biomass allocation. This research shows that species specific coefficients must be used if we are to reduce uncertainties in estimates of carbon stock changes by afforestation and reforestation activities.

Replacing Norway spruce with European beech: a comparison of biomass and Net Primary Production patterns in young stands

An alteration of species composition in temperate forests – both managed and natural - is one of the expected effects of environmental change. Present forest tree species ranges will be altered by changing environmental conditions. By a combination of continuous and destructive sampling, we compared biomass stocks and annual NPP in naturally regenerated stands of Norway spruce and European beech. We purposely selected a site where future environmental conditions are predicted to favour beech over presently dominant spruce. We found no difference in overall productivity, but biomass allocation differed significantly between the two species. Beech allocated more assimilates to stem and roots than spruce. There was no significant difference between the species in NPP of the fast turnover biomass pool comprising foliage and fine roots. Maximum height growth occurred about a month earlier than in spruce, potentially changing the timing of carbon (C) flow into the soil pools. We show that the replacement of spruce by beech will result in changes in forest biomass allocation and in alterations of belowground C cycle. Such changes will affect forest ecosystem function by modifying the magnitude and timing of certain C fluxes, but also by potentially changing the species composition of forest biota dependent on them.

MODIS-based vegetation index has sufficient sensitivity to indicate stand-level intra-seasonal climatic stress in oak and beech forests

Context: Variation in photosynthetic activity of trees induced by climatic stress can be effectively evaluated using remote sensing data. Although adverse effects of climate on temperate forests have been subjected to increased scrutiny, the suitability of remote sensing imagery for identification of drought stress in such forests has not been explored fully. Aim: To evaluate the sensitivity of MODIS-based vegetation index to heat and drought stress in temperate forests, and explore the differences in stress response of oaks and beech. Methods: We identified 8 oak and 13 beech pure and mature stands, each covering between 4 and 13 MODIS pixels. For each pixel, we extracted a time series of MODIS NDVI from 2000 to 2010. We identified all sequences of continuous unseasonal NDVI decline to be used as the response variable indicative of environmental stress. Neural Networks-based regression modelling was then applied to identify the climatic variables that best explain observed NDVI declines. Results: Tested variables explained 84–97% of the variation in NDVI, whilst air temperature-related climate extremes were found to be the most influential. Beech showed a linear response to the most influential climatic predictors, while oak responded in a unimodal pattern suggesting a better coping mechanism. Conclusions: MODIS NDVI has proved sufficiently sensitive as a stand-level indicator of climatic stress acting upon temperate broadleaf forests, leading to its potential use in predicting drought stress from meteorological observations and improving parameterisation of forest stress indices.

Lichen diversity in Iberian beech forests, a tool to assess environmental status

Universitat de Barcelona

Strength development of single beech wood veneers considering different climate conditions

La tesi di laurea è stata svolta presso l’Università di Scienze Applicate di Rosenheim, in Germania; il progetto di ricerca si basa sulla tecnica di rinforzo conosciuta come “Soil Nailing”, che consiste nella costruzione di un’opera di sostegno nella realizzazione di pareti di scavo o nel consolidamento di versanti instabili. L’obiettivo principale dell’elaborato sarà quello di valutare la fattibilità dell’impiego di tubi fabbricati con legno di faggio, in sostituzione dei chiodi d’acciaio comunemente utilizzati; la scelta di questo tipo di legno è dettata dalla larga disponibilità presente in Germania. La sollecitazione principale su tali tubi sarà di trazione parallela alla fibratura, tramite test sperimentali è stato possibile valutare tale resistenza nelle diverse condizioni in cui si verrà a trovare il tubo dopo l’installazione nel terreno. A tal proposito è necessario specificare che, l’indagine per risalire all’influenza che le condizioni ambientali esercitano sull’elemento, verrà condotta su provini costituiti da un singolo strato di legno; in tal modo si può apprezzare l’influenza direttamente sull’elemento base e poi risalire al comportamento globale. I dati ottenuti dall’indagine sperimentale sono stati elaborati tramite la teoria di Weibull, largamente utilizzata in tecnologia dei materiali per quanto riguarda materiali fragili come il legno; tali distribuzioni hanno permesso la determinazione della resistenza caratteristica dei provini per ogni condizione ambientale d’interesse. Per quanto riguarda la valutazione della fattibilità dell’uso di tubi in legno in questa tecnica di consolidamento, è stato eseguito il dimensionamento del tubo, utilizzando i dati a disposizione ottenuti dall’indagine sperimentale eseguita; ed infine sono state eseguite le verifiche di stabilità dell’intervento.

Differences in Soil Fungal Communities between European Beech (Fagus sylvatica L.) Dominated Forests Are Related to Soil and Understory Vegetation

Fungi are important members of soil microbial communities with a crucial role in biogeochemical processes. Although soil fungi are known to be highly diverse, little is known about factors influencing variations in their diversity and community structure among forests dominated by the same tree species but spread over different regions and under different managements. We analyzed the soil fungal diversity and community composition of managed and unmanaged European beech dominated forests located in three German regions, the Schwäbische Alb in Southwestern, the Hainich-Dün in Central and the Schorfheide Chorin in the Northeastern Germany, using internal transcribed spacer (ITS) rDNA pyrotag sequencing. Multiple sequence quality filtering followed by sequence data normalization revealed 1655 fungal operational taxonomic units. Further analysis based on 722 abundant fungal OTUs revealed the phylum Basidiomycota to be dominant (54%) and its community to comprise 71.4% of ectomycorrhizal taxa. Fungal community structure differed significantly (p≤0.001) among the three regions and was characterized by non-random fungal OTUs co-occurrence. Soil parameters, herbaceous understory vegetation, and litter cover affected fungal community structure. However, within each study region we found no difference in fungal community structure between management types. Our results also showed region specific significant correlation patterns between the dominant ectomycorrhizal fungal genera. This suggests that soil fungal communities are region-specific but nevertheless composed of functionally diverse and complementary taxa.