Three-dimensional tracking of motile bacteria near a solid planar surface.

Knowing how motile bacteria move near and along a solid surface is crucial to understanding such diverse phenomena as the migration of infectious bacteria along a catheter, biofilm growth, and the movement of bacteria through the pore spaces of saturated soil, a critical step in the in situ bioremediation of contaminated aquifers. In this study, a tracking microscope is used to record the three-dimensional motion of Escherichia coli near a planar glass surface. Data from the tracking microscope are analyzed to quantify the effects of bacteria-surface interactions on the swimming behavior of bacteria. The speed of cells approaching the surface is found to decrease in agreement with the mathematical model of Ramia et al. [Ramia, M., Tullock, D. L. & Phan-Tien, N. (1993) Biophys J. 65,755-778], which represents the bacteria as spheres with a single polar flagellum rotating at a constant rate. The tendency of cells to swim adjacent to the surface is shown in computer-generated reproductions of cell traces. The attractive interaction potential between the cells and the solid surface is offered as one of several possible explanations for this tendency.

A 24-month randomized clinical trial of a two- and three-step etch-and-rinse technique

Purpose This 24-month randomized paired tooth clinical study evaluated the performance of All Bond 3 used in the simplified (2-step) and full (3-step) versions Methods 33 patients, with at least two similar sized non-carious cervical lesions participated in this study A total of 66 restorations were placed, half using the 2-step All Bond 3 (AB3-2) and the other half using 3-step All Bond 3 (AB3-3) The restorations were placed incrementally using the composite resin Aelite The restorations were evaluated at baseline and after 6, 12 and 24 months following the modified USPHS criteria Statistical differences between the adhesive were tested using with McNemar`s test and clinical performance over time for each material with the Fisher`s exact test (alpha= 0 05) Results After 24 months, six AB3-2 and four AB3-3 were rated as bravo for marginal discoloration but did not differ from each other significantly (P> 0 05) The retention rates at 24 months of AB3-2 and AB3-3 were 90 9% and 97 0%, respectively (P> 0 05) (Am J Dent 2010,23 231-236)

Three-step pathway engineering results in more incidence rate and higher emission of nerolidol and improved attraction of Diadegma semiclausum

The concentration and ratio of terpenoids in the headspace volatile blend of plants have a fundamental role in the communication of plants and insects. The sesquiterpene (E)-nerolidol is one of the important volatiles with effect on beneficial carnivores for biologic pest management in the field. To optimize de novo biosynthesis and reliable and uniform emission of (E)-nerolidol, we engineered different steps of the (E)-nerolidol biosynthesis pathway in Arabidopsis thaliana. Introduction of a mitochondrial nerolidol synthase gene mediates de novo emission of (E)-nerolidol and linalool. Co-expression of the mitochondrial FPS1 and cytosolic HMGR1 increased the number of emitting transgenic plants (incidence rate) and the emission rate of both volatiles. No association between the emission rate of transgenic volatiles and their growth inhibitory effect could be established. (E)-Nerolidol was to a large extent metabolized to non-volatile conjugates.

Image fusion based on median filters and SOFM neural networks: a three-step scheme

This paper presents a new image data fusion scheme by combining median filtering with self-organizing feature map (SOFM) neural networks. The scheme consists of three steps: (1) pre-processing of the images, where weighted median filtering removes part of the noise components corrupting the image, (2) pixel clustering for each image using self-organizing feature map neural networks, and (3) fusion of the images obtained in Step (2), which suppresses the residual noise components and thus further improves the image quality. It proves that such a three-step combination offers an impressive effectiveness and performance improvement, which is confirmed by simulations involving three image sensors (each of which has a different noise structure).

One-Pot, Three-Step Reaction of 5-[(Trimethylsilyl)ethynyl]pyrrolidin-2-one with Azides Catalyzed by Cu-I: Synthesis of a Novel Class of 1,4-Disubstituted 1,2,3-Triazoles

A very fast, easy and efficient synthesis is described for a novel and biologically important class of 1,4-disubstituted-4-(5-pyrrolidin-2-one)-1,2,3-triazoles by an ultrasound-assisted one-pot, three-step click reaction sequence of 5-[(trimethylsilyl)ethynyl]pyrrolidin-2-one with organic azides mediated by catalytic Cu-I salts.

Near-infrared quantum cutting through a three-step energy transfer process in Nd3+-Yb3+ co-doped fluoroindogallate glasses

The Nd3+-Yb3+ couple was investigated in fluoroindogallate glasses using optical spectroscopy to elucidate the energy transfer mechanisms involved in the downconversion (DC) process. Upon excitation of a Nd3+ ion by an ultraviolet photon, DC through a three-step energy transfer process occurs, in which the energy of the ultraviolet photon absorbed by the Nd3+ ion is converted into three infrared photons emitted by Yb3+ ions, i.e. quantum cutting (QC). In addition, with excitation in the visible, our results confirm that the DC process occurs through a one-step energy transfer process, in which the energy of a visible photon absorbed by the Nd3+ ion is converted into only one infrared photon emitted by an Yb3+ ion. Time-resolved measurements enabled the estimation of the efficiencies of the cross-relaxation processes between Nd3+ and Yb3+ ions.

Comparison of three optical tracking systems in a complex navigation scenario

Three-dimensional rotational X-ray imaging with the SIREMOBIL Iso-C3D (Siemens AG, Medical Solutions, Erlangen, Germany) has become a well-established intra-operative imaging modality. In combination with a tracking system, the Iso-C3D provides inherently registered image volumes ready for direct navigation. This is achieved by means of a pre-calibration procedure. The aim of this study was to investigate the influence of the tracking system used on the overall navigation accuracy of direct Iso-C3D navigation. Three models of tracking system were used in the study: Two Optotrak 3020s, a Polaris P4 and a Polaris Spectra system, with both Polaris systems being in the passive operation mode. The evaluation was carried out at two different sites using two Iso-C3D devices. To measure the navigation accuracy, a number of phantom experiments were conducted using an acrylic phantom equipped with titanium spheres. After scanning, a special pointer was used to pinpoint these markers. The difference between the digitized and navigated positions served as the accuracy measure. Up to 20 phantom scans were performed for each tracking system. The average accuracy measured was 0.86 mm and 0.96 mm for the two Optotrak 3020 systems, 1.15 mm for the Polaris P4, and 1.04 mm for the Polaris Spectra system. For the Polaris systems a higher maximal error was found, but all three systems yielded similar minimal errors. On average, all tracking systems used in this study could deliver similar navigation accuracy. The passive Polaris system showed ? as expected ? higher maximal errors; however, depending on the application constraints, this might be negligible.

Classification of acute and delayed contrast media-induced reactions: proposal of a three-step system

Physicians and scientists use a broad spectrum of terms to classify contrast media (CM)-induced adverse reactions. In particular, the designation of hypersensitivity reactions is quite varied. Consequently, comparisons of different papers dealing with this subject are difficult or even impossible. Moreover, general descriptions may lead to problems in understanding reactions in patients with a history of adverse CM-reactions, and in efficiently managing these patients. Therefore, the goal of this paper is to suggest an easy system to clearly classify these reactions. The proposed three-step systems (3SS) is built up as follows: step 1 exactly describes the clinical features, including their severity; step 2 categorizes the time point of the onset (immediate or nonimmediate); and step 3 generally classifies the reaction (hypersensitivity or nonhypersensitivity reaction). The 3SS may facilitate better understanding of the clinical manifestations of adverse CM reactions and may support the prevention of these reactions on the basis of personalized medicine approaches.

The International Three-Step Test. A Model Provision for EC Fair Use Legislation

The three-step test is central to the regulation of copyright limitations at the international level. Delineating the room for exemptions with abstract criteria, the three-step test is by far the most important and comprehensive basis for the introduction of national use privileges. It is an essential, flexible element in the international limitation infrastructure that allows national law makers to satisfy domestic social, cultural, and economic needs. Given the universal field of application that follows from the test’s open-ended wording, the provision creates much more breathing space than the more specific exceptions recognized in international copyright law. EC copyright legislation, however, fails to take advantage of the flexibility inherent in the three-step test. Instead of using the international provision as a means to open up the closed EC catalogue of permissible exceptions, offer sufficient breathing space for social, cultural, and economic needs, and enable EC copyright law to keep pace with the rapid development of the Internet, the Copyright Directive 2001/29/EC encourages the application of the three-step test to further restrict statutory exceptions that are often defined narrowly in national legislation anyway. In the current online environment, however, enhanced flexibility in the field of copyright limitations is indispensable. From a social and cultural perspective, the web 2.0 promotes and enhances freedom of expression and information with its advanced search engine services, interactive platforms, and various forms of user-generated content. From an economic perspective, it creates a parallel universe of traditional content providers relying on copyright protection, and emerging Internet industries whose further development depends on robust copyright limita- tions. In particular, the newcomers in the online market – social networking sites, video forums, and virtual worlds – promise a remarkable potential for economic growth that has already attracted the attention of the OECD. Against this background, the time is ripe to debate the introduction of an EC fair use doctrine on the basis of the three-step test. Otherwise, EC copyright law is likely to frustrate important opportunities for cultural, social, and economic development. To lay groundwork for the debate, the differences between the continental European and the Anglo-American approach to copyright limitations (section 1), and the specific merits of these two distinct approaches (section 2), will be discussed first. An analysis of current problems that have arisen under the present dysfunctional EC system (section 3) will then serve as a starting point for proposing an EC fair use doctrine based on the three-step test (section 4). Drawing conclusions, the international dimension of this fair use proposal will be considered (section 5).

Declaration on the Three-Step Test: Where do we go from here?

The “Declaration on a balanced interpretation of the ‘Three-Step Test’” as such cannot solve the problem of lacking limitations; however, it emphasizes that the existing international legislation does not prohibit further amendments to copyright law. Nations that dispose of the political will are in a position to introduce new limitations. In addition, further international agreements focusing on new limitations may be negotiated among those countries that are ready to do so.

Reliability and Failure Modes of Implant-Supported Y-TZP and MCR Three-Unit Bridges

Purpose: Chipping within veneering porcelain has resulted in high clinical failure rates for implant-supported zirconia (yttria-tetragonal zirconia polycrystals [Y-TZP]) bridges. This study evaluated the reliability and failure modes of mouth-motion step-stress fatigued implant-supported Y-TZP versus palladium-silver alloy (PdAg) three-unit bridges. Materials and Methods: Implant-abutment replicas were embedded in polymethylmethacrylate resin. Y-TZP and PdAg frameworks, of similar design (n = 21 each), were fabricated, veneered, cemented (n = 3 each), and Hertzian contact-tested to obtain ultimate failure load. In each framework group, 18 specimens were distributed across three step-stress profiles and mouth-motion cyclically loaded according to the profile on the lingual slope of the buccal cusp of the pontic. Results: PdAg failures included competing flexural cracking at abutment and/or connector area and chipping, whereas Y-TZP presented predominantly cohesive failure within veneering porcelain. Including all failure modes, the reliability (two-sided at 90% confidence intervals) for a ""mission"" of 50,000 and 100,000 cycles at 300 N load was determined (Alta Pro, Reliasoft, Tucson, AZ, USA). No difference in reliability was observed between groups for a mission of 50,000. Reliability remained unchanged for a mission of 100,000 for PdAg, but significantly decreased for Y-TZP. Conclusions: Higher reliability was found for PdAg for a mission of 100,000 cycles at 300 N. Failure modes differed between materials.

Establishment of a Developmental Compartment Requires Interactions between Three Synergistic Cis-regulatory Modules.

The subdivision of cell populations in compartments is a key event during animal development. In Drosophila, the gene apterous (ap) divides the wing imaginal disc in dorsal vs ventral cell lineages and is required for wing formation. ap function as a dorsal selector gene has been extensively studied. However, the regulation of its expression during wing development is poorly understood. In this study, we analyzed ap transcriptional regulation at the endogenous locus and identified three cis-regulatory modules (CRMs) essential for wing development. Only when the three CRMs are combined, robust ap expression is obtained. In addition, we genetically and molecularly analyzed the trans-factors that regulate these CRMs. Our results propose a three-step mechanism for the cell lineage compartment expression of ap that includes initial activation, positive autoregulation and Trithorax-mediated maintenance through separable CRMs.

A physical activity intervention in a workplace setting

Physical inactivity poses a huge burden on Canada's health care system and is detrimental to the health of Canadians (Katzmarzyk & Janssen, 2004). Walking is a viable option for individuals to become physically active on a daily basis and is in fact the most commonly reported leisure time physical activity. It has been associated with many health benefits including weight loss/weight control, reduced risk of coronary artery disease and diabetes, lowered blood pressure, and improved psychological wellbeing (Brisson & Tudor-Locke, 2004). Specifically, individuals' stage of change, selfefficacy and health related quality of life (HRQL) are three psychological constructs that can be greatly improved with increased physical activity (Dishman, 1991; Penedo & Dahn, 2005; Poag & McAuley, 1992). Public health physical activity recommendations exist but many individuals find these difficult to meet due to overly busy lifestyles (Public Health Agency of Canada, 2003). Pedometers are inexpensive devices that can monitor individual bouts of walking so that the incorporation of physical activity into one's daily life is more plausible. They are also excellent tools for motivation, goalsetting, and immediate feedback (Brisson & Tudor-Locke, 2004). Since many people spend a large proportion of their time at their places of employment, workplaces have begun to be a common site for the development of physical activity interventions. These programs have been growing in popUlarity and have shown numerous benefits for both employees and employers (Voit, 2001). The purpose of the current study was to implement and evaluate the use of a pedometer-based physical activity intervention incorporating goal-setting and physical activity logs in a workplace setting, and to examine the relationship between different types of self-efficacy (task, barrier, and scheduling) and different phases of the intervention. Twenty male participants from a local steel manufacturing plant who exhibited health risk factors (e.g. hypertension, diabetes, etc.) were assigned to one of two groups (group A or group B). All participants were asked to wear pedometers on their waists, record their daily steps, set goals that were outlined on a step-tracking sheet (detennined by their baseline number of steps), and keep track of their work days, wakelbed time, sedentary time, and time spent doing other physical activity. Group A began the intervention immediately following the baseline measures, whereas group B continued with their regular routine for 4 weeks before beginning. Physiological measures (height, weight, blood pressure, relative body fat, waist and hip circumference, and body mass index) were taken and a battery of questionnaires that assessed barrier, task and scheduling self-efficacy, HRQL, and stage of change administered at baseline, week 5 (end of intervention for group A), week 9 (end of intervention for group B; follow-up for group A) and week 13 (follow-up for both groups). Results showed that this workplace physical activity intervention was successful at increasing the participants' daily steps, that task self-efficacy is a significant predictor of participants' exercise adherence during the initial stages of participation (intervention phase), and that the participants felt that this intervention was effective. Finally, further exploratory analyses showed that this intervention was effective for all participants, but most valuable for participants most in need of improvement - that is, those who were most sedentary prior to the intervention. This intervention is an inexpensive use of simple and effective tools (e.g. pedometers), has the potential to attract a wide variety of participants and become a pennanent part of any health promotion initiative.