Automated Software Testing in Machine Automation

The problem of software (SW) defaults is becoming more and more topical because of increasing amount of the SW and its complication. The majority of these defaults are founded during the test part that consumes about 40-50% of the development efforts. Test automation allows reducing the cost of this process and increasing testing effectiveness. In the middle of 1980 the first tools for automated testing appeared and the automated process was implemented in different kinds of SW testing. In short time, it became obviously, automated testing can cause many problems such as increasing product cost, decreasing reliability and even project fail. This thesis describes automated testing process, its concept, lists main problems, and gives an algorithm for automated test tools selection. Also this work presents an overview of the main automated test tools for embedded systems.

Automated Software Debugging Using Hybrid Static/Dynamic Analysis

With the increasing complexity of today's software, the software development process is becoming highly time and resource consuming. The increasing number of software configurations, input parameters, usage scenarios, supporting platforms, external dependencies, and versions plays an important role in expanding the costs of maintaining and repairing unforeseeable software faults. To repair software faults, developers spend considerable time in identifying the scenarios leading to those faults and root-causing the problems. While software debugging remains largely manual, it is not the case with software testing and verification. The goal of this research is to improve the software development process in general, and software debugging process in particular, by devising techniques and methods for automated software debugging, which leverage the advances in automatic test case generation and replay. In this research, novel algorithms are devised to discover faulty execution paths in programs by utilizing already existing software test cases, which can be either automatically or manually generated. The execution traces, or alternatively, the sequence covers of the failing test cases are extracted. Afterwards, commonalities between these test case sequence covers are extracted, processed, analyzed, and then presented to the developers in the form of subsequences that may be causing the fault. The hypothesis is that code sequences that are shared between a number of faulty test cases for the same reason resemble the faulty execution path, and hence, the search space for the faulty execution path can be narrowed down by using a large number of test cases. To achieve this goal, an efficient algorithm is implemented for finding common subsequences among a set of code sequence covers. Optimization techniques are devised to generate shorter and more logical sequence covers, and to select subsequences with high likelihood of containing the root cause among the set of all possible common subsequences. A hybrid static/dynamic analysis approach is designed to trace back the common subsequences from the end to the root cause. A debugging tool is created to enable developers to use the approach, and integrate it with an existing Integrated Development Environment. The tool is also integrated with the environment's program editors so that developers can benefit from both the tool suggestions, and their source code counterparts. Finally, a comparison between the developed approach and the state-of-the-art techniques shows that developers need only to inspect a small number of lines in order to find the root cause of the fault. Furthermore, experimental evaluation shows that the algorithm optimizations lead to better results in terms of both the algorithm running time and the output subsequence length.

Extending Automated Testing To High-level Software Requirements : A study on the feasibility of automated acceptance-testing

Automated acceptance testing is the testing of software done in higher level to test whether the system abides by the requirements desired by the business clients by the use of piece of script other than the software itself. This project is a study of the feasibility of acceptance tests written in Behavior Driven Development principle. The project includes an implementation part where automated accep- tance testing is written for Touch-point web application developed by Dewire (a software consultant company) for Telia (a telecom company) from the require- ments received from the customer (Telia). The automated acceptance testing is in Cucumber-Selenium framework which enforces Behavior Driven Development principles. The purpose of the implementation is to verify the practicability of this style of acceptance testing. From the completion of implementation, it was concluded that all the requirements from customer in real world can be converted into executable specifications and the process was not at all time-consuming or difficult for a low-experienced programmer like the author itself. The project also includes survey to measure the learnability and understandability of Gherkin- the language that Cucumber understands. The survey consist of some Gherkin exam- ples followed with questions that include making changes to the Gherkin exam- ples. Survey had 3 parts: first being easy, second medium and third most difficult. Survey also had a linear scale from 1 to 5 to rate the difficulty level for each part of the survey. 1 stood for very easy and 5 for very difficult. Time when the partic- ipants began the survey was also taken in order to calculate the total time taken by the participants to learn and answer the questions. Survey was taken by 18 of the employers of Dewire who had primary working role as one of the programmer, tester and project manager. In the result, tester and project manager were grouped as non-programmer. The survey concluded that it is very easy and quick to learn Gherkin. While the participants rated Gherkin as very easy.

Automated UI testing. WBCT, a computer-automated user test environment tool.

Today, the user experience and usability in software application are becoming a major design issue due to the adaptation of many processes using new technologies. Therefore, the study of the user experience and usability might be included in every software development project and, thus, they should be tested to get traceable results. As a result of different testing methods to evaluate the concepts, a non-expert on the topic might have doubts on which option he/she should opt for and how to interpret the outcomes of the process. This work aims to create a process to ease the whole testing methodology based on the process created by Seffah et al. and a supporting software tool to follow the procedure of these testing methods for the user experience and usability.

Software Testing and Documenting Automation

This article describes some approaches to problem of testing and documenting automation in information systems with graphical user interface. Combination of data mining methods and theory of finite state machines is used for testing automation. Automated creation of software documentation is based on using metadata in documented system. Metadata is built on graph model. Described approaches improve performance and quality of testing and documenting processes.

Desenvolvimento de Frameworks de Testes Automáticos de Software

O objetivo deste trabalho é o desenvolvimento de frameworks de testes automáticos de software. Este tipo de testes normalmente está associado ao modelo evolucionário e às metodologias ágeis de desenvolvimento de software, enquanto que os testes manuais estão relacionados com o modelo em cascata e as metodologias tradicionais. Como tal foi efetuado um estudo comparativo sobre os tipos de metodologias e de testes existentes, para decidir quais os que melhor se adequavam ao projeto e dar resposta à questão "Será que realmente compensa realizar testes (automáticos)?". Finalizado o estudo foram desenvolvidas duas frameworks, a primeira para a implementação de testes funcionais e unitários sem dependências a ser utilizada pelos estagiários curriculares da LabOrders, e a segunda para a implementação de testes unitários com dependências externas de base de dados e serviços, a ser utilizada pelos funcionários da empresa. Nas últimas duas décadas as metodologias ágeis de desenvolvimento de software não pararam de evoluir, no entanto as ferramentas de automação não conseguiram acompanhar este progresso. Muitas áreas não são abrangidas pelos testes e por isso alguns têm de ser feitos manualmente. Posto isto foram criadas várias funcionalidades inovadoras para aumentar a cobertura dos testes e tornar as frameworks o mais intuitivas possível, nomeadamente: 1. Download automático de ficheiros através do Internet Explorer 9 (e versões mais recentes). 2. Análise do conteúdo de ficheiros .pdf (através dos testes). 3. Obtenção de elementos web e respetivos atributos através de código jQuery utilizando a API WebDriver com PHP bindings. 4. Exibição de mensagens de erro personalizadas quando não é possível encontrar um determinado elemento. As frameworks implementadas estão também preparadas para a criação de outros testes (de carga, integração, regressão) que possam vir a ser necessários no futuro. Foram testadas em contexto de trabalho pelos colaboradores e clientes da empresa onde foi realizado o projeto de mestrado e os resultados permitiram concluir que a adoção de uma metodologia de desenvolvimento de software com testes automáticos pode aumentar a produtividade, reduzir as falhas e potenciar o cumprimento de orçamentos e prazos dos projetos das organizações.

Non-Destructive Evaluation of Iowa Pavements Phase 2: Development of a Fully Automated Software System for Rapid Analysis/Processing of the Falling Weight Deflectometer Data, 2009

The Office of Special Investigations at Iowa Department of Transportation (DOT) collects FWD data on regular basis to evaluate pavement structural conditions. The primary objective of this study was to develop a fully-automated software system for rapid processing of the FWD data along with a user manual. The software system automatically reads the FWD raw data collected by the JILS-20 type FWD machine that Iowa DOT owns, processes and analyzes the collected data with the rapid prediction algorithms developed during the phase I study. This system smoothly integrates the FWD data analysis algorithms and the computer program being used to collect the pavement deflection data. This system can be used to assess pavement condition, estimate remaining pavement life, and eventually help assess pavement rehabilitation strategies by the Iowa DOT pavement management team. This report describes the developed software in detail and can also be used as a user-manual for conducting simulation studies and detailed analyses. *********************** Large File ***********************

Observations on Software Testing Practice

This thesis investigates factors that affect software testing practice. The thesis consists of empirical studies, in which the affecting factors were analyzed and interpreted using quantitative and qualitative methods. First, the Delphi method was used to specify the scope of the thesis. Secondly, for the quantitative analysis 40industry experts from 30 organizational units (OUs) were interviewed. The survey method was used to explore factors that affect software testing practice. Conclusions were derived using correlation and regression analysis. Thirdly, from these 30 OUs, five were further selected for an in-depth case study. The data was collected through 41 semi-structured interviews. The affecting factors and their relationships were interpreted with qualitative analysis using grounded theory as the research method. The practice of software testing was analyzed from the process improvement and knowledge management viewpoints. The qualitative and quantitativeresults were triangulated to increase the validity of the thesis. Results suggested that testing ought to be adjusted according to the business orientation of the OU; the business orientation affects the testing organization and knowledge management strategy, and the business orientation andthe knowledge management strategy affect outsourcing. As a special case, the complex relationship between testing schedules and knowledge transfer is discussed. The results of this thesis can be used in improvingtesting processes and knowledge management in software testing.

Software testing design and implementation in a small software company

Monet ohjelmistoyritykset ovat alkaneet kiinnittää yhä enemmän huomiota ohjelmistotuotteidensa laatuun. Tämä on johtanut siihen, että useimmat niistä ovat valinneet ohjelmistotestauksen välineeksi, jolla tätä laatua voidaan parantaa. Testausta ei pidä rajoittaa ainoastaan ohjelmistotuotteeseen itseensä, vaan sen tulisi kattaa koko ohjelmiston kehitysprosessi. Validaatiotestauksessa keskitytään varmistamaan, että lopputuote täyttää sille asetetut vaatimukset, kun taas verifikaatiotestausta käytetään ennaltaehkäisevänä testauksena, jolla pyritään poistamaan virheitä jo ennenkuin ne pääsevät lähdekoodiin asti. Työ, johon tämä diplomityö perustuu, tehtiin alkukevään ja kesän aikana vuonna 2003 Necsom Oy:n toimeksiannosta. Necsom on pieni suomalainen ohjelmistoyritys, jonka tutkimus- ja kehitysyksikkö toimii Lappeenrannassa.Tässä diplomityössä tutustutaan aluksi ohjelmistotestaukseen sekä eri tapoihin sen organisoimiseksi. Tämän lisäksi annetaan yleisiä ohjeita testisuunnitelmien ja testaustapausten tekoon, joita onnistunut ja tehokas testaus edellyttää. Kun tämä teoria on käyty läpi, esitetään esimerkkinä kuinka sisäinen ohjelmistotestaus toteutettiin Necsomilla. Lopuksi esitetään johtopäätökset, joihin päädyttiin käytännön testausprosessin seuraamisen jälkeen ja annetaan jatkotoimenpide-ehdotuksia.

Interface Implementation for GPRS/PCU Software Testing with Emulators

Jatkuvasti lisääntyvä matkapuhelinten käyttäjien määrä, internetin kehittyminen yleiseksi tiedon ja viihteen lähteeksi on luonut tarpeen palvelulle liikkuvan työaseman liittämiseksi tietokoneverkkoihin. GPRS on uusi teknologia, joka tarjoaa olemassa olevia matka- puhelinverkkoja (esim. NMT ja GSM) nopeamman, tehokkaamman ja taloudellisemman liitynnän pakettidataverkkoihin, kuten internettiin ja intranetteihin. Tämän työn tavoitteena oli toteuttaa GPRS:n paketinohjausyksikön (Packet Control Unit, PCU) testauksessa tarvittavat viestintäajurit työasemaympristöön. Aidot matkapuhelinverkot ovat liian kalliita, eikä niistä saa tarvittavasti lokitulostuksia, jotta niitä voisi käyttää GPRS:n testauksessa ohjelmiston kehityksen alkuvaihessa. Tämän takia PCU-ohjelmiston testaus suoritetaan joustavammassa ja helpommin hallittavassa ympäristössä, joka ei aseta kovia reaaliaikavaatimuksia. Uusi toimintaympäristö ja yhteysmedia vaativat PCU:n ja muiden GPRS-verkon yksiköiden välisistä yhteyksistä huolehtivien ohjelman osien, viestintäajurien uuden toteutuksen. Tämän työn tuloksena syntyivät tarvittavien viestintäajurien työasemaversiot. Työssä tarkastellaan eri tiedonsiirtotapoja ja -protokollia testattavan ohjelmiston vaateiden, toteutetun ajurin ja testauksen kannalta. Työssä esitellään kunkin ajurin toteuttama rajapinta ja toteutuksen aste, eli mitkä toiminnot on toteutettu ja mitä on jätetty pois. Ajureiden rakenne ja toiminta selvitetään siltä osin, kuin se on oleellista ohjelman toiminnan kannalta.

A Survey and Classification of Software Testing Tools

Software testing is one of the essential parts in software engineering process. The objective of the study was to describe software testing tools and the corresponding use. The thesis contains examples of software testing tools usage. The study was conducted as a literature study, with focus on current software testing practices and quality assurance standards. In the paper a tool classifier was employed, and testing tools presented in study were classified according to it. We found that it is difficult to distinguish current available tools by certain testing activities as many of them contain functionality that exceeds scopes of a single testing type.

A proposal for a repertoire of software testing methods

Nowadays software testing and quality assurance have a great value in software development process. Software testing does not mean a concrete discipline, it is the process of validation and verification that starts from the idea of future product and finishes at the end of product’s maintenance. The importance of software testing methods and tools that can be applied on different testing phases is highly stressed in industry. The initial objectives for this thesis were to provide a sufficient literature review on different testing phases and for each of the phases define the method that can be effectively used for improving software’s quality. Software testing phases, chosen for study are: unit testing, integration testing, functional testing, system testing, acceptance testing and usability testing. The research showed that there are many software testing methods that can be applied at different phases and in the most of the cases the choice of the method should be done depending on software type and its specification. In the thesis the problem, concerned to each of the phases was identified; the method that can help in eliminating this problem was suggested and particularly described.

Fully automated software solution for protein quantitation by global metabolic labeling with stable isotopes

Metabolic stable isotope labeling is increasingly employed for accurate protein (and metabolite) quantitation using mass spectrometry (MS). It provides sample-specific isotopologues that can be used to facilitate comparative analysis of two or more samples. Stable Isotope Labeling by Amino acids in Cell culture (SILAC) has been used for almost a decade in proteomic research and analytical software solutions have been established that provide an easy and integrated workflow for elucidating sample abundance ratios for most MS data formats. While SILAC is a discrete labeling method using specific amino acids, global metabolic stable isotope labeling using isotopes such as (15)N labels the entire element content of the sample, i.e. for (15)N the entire peptide backbone in addition to all nitrogen-containing side chains. Although global metabolic labeling can deliver advantages with regard to isotope incorporation and costs, the requirements for data analysis are more demanding because, for instance for polypeptides, the mass difference introduced by the label depends on the amino acid composition. Consequently, there has been less progress on the automation of the data processing and mining steps for this type of protein quantitation. Here, we present a new integrated software solution for the quantitative analysis of protein expression in differential samples and show the benefits of high-resolution MS data in quantitative proteomic analyses.