Sampling and analyzing metals in soils for archaeological prospection: a critique

This paper presents a critique of current methods of sampling and analyzing soils for metals in archaeological prospection. Commonly used methodologies in soil science are shown to be suitable for archaeological investigations, with a concomitant improvement in their resolution. Understanding the soil-fraction location, concentration range, and spatial distribution of autochthonous (native) soil metals is shown to be a vital precursor to archaeological-site investigations, as this is the background upon which anthropogenic deposition takes place. Nested sampling is suggested as the most cost-effective method of investigating the spatial variability in the autochthonous metal concentrations. The use of the appropriate soil horizon (or sampling depth) and point sampling are critical in the preparation of a sampling regime. Simultaneous extraction is proposed as the most efficient method of identifying the location and eventual fate of autochthonous and anthropogenic metals, respectively.

Remote Detection and Identification of Organic Remains: An Assessment of Archaeological Potential

This paper reviews the various methods of using natural or induced light spectra as analytical tools in forensic archaeology. Chemical identi?cation can be made at long range and wide scale (tens of metres) down to short range and very small scale (nanometres). The identi?cation of organic gases and materials has used either chemical capture and chromatography, induced (laser or ultraviolet) light sources or laser Raman microscope spectroscopy. The remote gas detection method relies on the identi?cation of atmospheric gases by their characteristic light spectra. Modern spectroscopes can detect gases down to a few parts per million of an atmosphere. When the light source (wavelength) and direction is controlled, so laser-induced spectroscopy may be used to monitor the emission of gases such methane from buried organic remains. In order to identify the location of buried organic remains, a grid of sample points must be established using a base line or global
positioning system. When matched to base line or ground-positioning systems, such data can be manipulated by geographical information system packages. This would enable pinpointing of anomalies for excavation or avoidance. Microscope-based laser Raman spectroscopy can be used to directly analyse captured gases, swabs and surfaces without the problems of long-path detection. Copyright ? 2002 John Wiley & Sons, Ltd.

Assessment of the CMD Mini-Explorer, a new low-frequency multi-coil electromagnetic device, for archaeological investigations

In this article we assess the abilities of a new electromagnetic (EM) system, the CMD Mini-Explorer, for prospecting of archaeological features in Ireland and the UK. The Mini-Explorer is an EM probe which is primarily aimed at the environmental/geological prospecting market for the detection of pipes and geology. It has long been evident from the use of other EM devices that such an instrument might be suitable for shallow soil studies and applicable for archaeological prospecting. Of particular interest for the archaeological surveyor is the fact that the Mini-Explorer simultaneously obtains both quadrature (‘conductivity’) and in-phase (relative to ‘magnetic susceptibility’) data from three depth levels. As the maximum depth range is probably about 1.5 m, a comprehensive analysis of the subsoil within that range is possible. As with all EM devices the measurements require no contact with the ground, thereby negating the problem of high contact resistance that often besets earth resistance data during dry spells. The use of the CMD Mini-Explorer at a number of sites has demonstrated that it has the potential to detect a range of archaeological features and produces high-quality data that are comparable in quality to those obtained from standard earth resistance and magnetometer techniques. In theory the ability to measure two phenomena at three depths suggests that this type of instrument could reduce the number of poor outcomes that are the result of single measurement surveys. The high success rate reported here in the identification of buried archaeology using a multi-depth device that responds to the two most commonly mapped geophysical phenomena has implications for evaluation style surveys. Copyright © 2013 John Wiley & Sons, Ltd.

Un método de prospección en Arqueología de la Arquitectura. La arquitectura medieval «invisible»

[ES]Propuesta que se encuadra en el estudio de una serie de edificaciones anteriores al románico en la Diócesis de Vitoria, supuestamente inexistentes hasta el momento, en el marco del análisis de las técnicas constructivas medievales del territorio. Para ello se debía contar con una muestra de edificios bien fechados,algo imposible hasta la fecha dado que la historiografía negaba la existencia de iglesias prerrománicas en Álava. Por esto era necesario conseguir una muestra sobre la cual trabajar, para lo que se recurrió a un proceso de selección de edificios en los que se conservaran evidencias anteriores al románico, diseñándose el modelo de prospección que presentamos.

Resistivity imaging survey of the Roman barrows at Bartlow, Cambridgeshire, UK

Resistivity imaging was carried out on four large Roman barrows at Bartlow in Cambridgeshire. The geophysical survey formed part of a wider research project designed to record and assess the landscape context of the largest surviving Roman burial mounds in Britain. The barrows today range in height from 6.6 m to 13.2 m and their steep profile loosed particular practical and modelling challenges. Data were obtained using a Campus Geopulse resistance meter with up to 50 electrodes spaced at 1 m intervals and lines up to 76 m long. A total of 24 lines was obtained. Topographic corrections were applied to the pseudosections, whichwere inverted using Res 2 Dinv and Res3 Dinv. Resistivity imaging was particularly successful in identifying evidence for the antiquarian explorations of the site. Central collapse features or in-filled tunnels image as high resistance features in all barrows and in one (Barrow IV) there is also a low resistance feature in the approximate position of a known antiquarian tunnel. Barrow VI had a thick covering of high-resistivity that may relate to nineteenth century landscaping and reconstruction of this monument. Resistivity imaging also revealed possible evidence for ancient revetments in all four large barrows. Copyright (c) 2006 John Wiley & Sons, Ltd.

Methoden zur Analyse, Interpretation und Modellierung des elektrischen Widerstandes von archäologischen Steinstrukturen

In der Archäologie werden elektrische Widerstandsmessungen routinemäßig zur Prospektion von Fundstellen eingesetzt. Die Methode ist kostengünstig, leicht anwendbar und liefert in den meisten Fällen zuverlässige und leicht zu interpretierende Ergebnisse. Dennoch kann die Methode die archäologischen Strukturen in manchen Fällen nur teilweise oder gar nicht abbilden, wenn die bodenphysikalischen und bodenchemischen Eigenschaften des Bodens und der archäologischen Strukturen dies nicht zulassen. Der spezifische elektrische Widerstand wird durch Parameter wie Wassergehalt, Bodenstruktur, Bodenskelett, Bodentextur, Salinität und Bodentemperatur beeinflusst. Manche dieser Parameter, wie z.B. der Wassergehalt und die Bodentemperatur, unterliegen einer saisonalen Veränderung. Die vorliegende Arbeit untersucht den spezifischen elektrischen Widerstand von archäologischen Steinstrukturen und evaluiert die Möglichkeit, auf Grundlage von Geländemessungen und Laboranalysen archäologische Strukturen und Böden als numerische Modelle darzustellen. Dazu wurde eine Kombination von verschiedenen bodenkundlichen, geoarchäologischen und geophysikalischen Methoden verwendet. Um archäologische Strukturen und Bodenprofile als numerische Widerstandsmodelle darstellen zu können, werden Informationen zur Geometrie der Strukturen und ihren elektrischen Widerstandswerten benötigt. Dabei ist die Qualität der Hintergrundinformationen entscheidend für die Genauigkeit des Widerstandsmodells. Die Geometrie der Widerstandsmodelle basiert auf den Ergebnissen von Rammkernsondierungen und archäologische Ausgrabungen. Die an der Ausbildung des elektrischen Widerstands beteiligten Parameter wurden durch die Analyse von Bodenproben gemessen und ermöglichen durch Pedotransfer-Funktion, wie die Rhoades-Formel, die Abschätzung des spezifischen elektrischen Widerstandes des Feinbodens. Um den Einfluss des Bodenskeletts auf den spezifischen elektrischen Widerstand von Bodenprofilen und archäologischen Strukturen zu berechnen, kamen die Perkolationstheorie und die Effective Medium Theory zum Einsatz. Die Genauigkeit und eventuelle Limitierungen der Methoden wurden im Labor durch experimentelle Widerstandsmessungen an ungestörten Bodenproben und synthetischen Materialien überprüft. Die saisonale Veränderung des Wassergehalts im Boden wurde durch numerische Modelle mit der Software HYDRUS simuliert. Die hydraulischen Modelle wurden auf Grundlage der ermittelten bodenkundlichen und archäologischen Stratigraphie erstellt und verwenden die Daten von lokalen Wetterstationen als Eingangsparameter. Durch die Kombination der HYDRUS-Ergebnisse mit den Pedotransfer-Funktionen konnte der Einfluss dieser saisonalen Veränderung auf die Prospektionsergebnisse von elektrischen Widerstandsmethoden berechnet werden. Die Ergebnisse der Modellierungsprozesse wurden mit den Geländemessungen verglichen. Die beste Übereinstimmung zwischen Modellergebnissen und den Prospektionsergebnissen konnte für die Fallstudie bei Katzenbach festgestellt werden. Bei dieser wurden die Modelle auf Grundlage von archäologischen Grabungsergebnissen und detaillierten bodenkundlichen Analysen erstellt. Weitere Fallstudien zeigen, dass elektrische Widerstandsmodelle eingesetzt werden können, um den Einfluss von ungünstigen Prospektionsbedingungen auf die Ergebnisse der elektrischen Widerstandsmessungen abzuschätzen. Diese Informationen unterstützen die Planung und Anwendung der Methoden im Gelände und ermöglichen eine effektivere Interpretation der Prospektionsergebnisse. Die präsentierten Modellierungsansätze benötigen eine weitere Verifizierung durch den Vergleich der Modellierungsergebnisse mit detailliertem geophysikalischem Gelände-Monitoring von archäologischen Fundstellen. Zusätzlich könnten elektrische Widerstandsmessungen an künstlichen Mauerstrukturen unter kontrollierten Bedingungen zur Überprüfung der Modellierungsprozesse genutzt werden.

Posterior Probability Modeling and Image Classification for Archaeological Site Prospection: Building a Survey Efficacy Model for Identifying Neolithic Felsite Workshops in the Shetland Islands

The application of custom classification techniques and posterior probability modeling (PPM) using Worldview-2 multispectral imagery to archaeological field survey is presented in this paper. Research is focused on the identification of Neolithic felsite stone tool workshops in the North Mavine region of the Shetland Islands in Northern Scotland. Sample data from known workshops surveyed using differential GPS are used alongside known non-sites to train a linear discriminant analysis (LDA) classifier based on a combination of datasets including Worldview-2 bands, band difference ratios (BDR) and topographical derivatives. Principal components analysis is further used to test and reduce dimensionality caused by redundant datasets. Probability models were generated by LDA using principal components and tested with sites identified through geological field survey. Testing shows the prospective ability of this technique and significance between 0.05 and 0.01, and gain statistics between 0.90 and 0.94, higher than those obtained using maximum likelihood and random forest classifiers. Results suggest that this approach is best suited to relatively homogenous site types, and performs better with correlated data sources. Finally, by combining posterior probability models and least-cost analysis, a survey least-cost efficacy model is generated showing the utility of such approaches to archaeological field survey.

Glastonbury Abbey: archaeological investigations 1904-79

This volume reports on the results of the Glastonbury Abbey Archaeological Archive Project, a collaboration between the University of Reading and the Trustees of Glastonbury Abbey, funded principally by the Arts and Humanities Research Council. The project has reassessed and reinterpreted all known archaeological records from the 1908–79 excavations and made the complete dataset available to the public through a digital archive hosted by the Archaeology Data Service (http://dx.doi.org/10.5284/1022585). The scope of the project has included the full analysis of the archaeological collections of Glastonbury Abbey by thirty-one leading specialists, including chemical and compositional analysis of glass and metal and petrological analysis of pottery and tile, and a comprehensive geophysical survey conducted by GSB Prospection Ltd. For the first time, it has been possible to achieve a framework of independent dating based on reassessment of the finds and radiocarbon dating of surviving organic material from the 1950s excavations. The principal aim of the Glastonbury Abbey Archaeological Project was to set aside previous assumptions based on the historical and legendary traditions and to provide a rigorous reassessment of the archive of antiquarian excavations. This research has revealed that some of the best known archaeological ‘facts’ about Glastonbury are themselves myths perpetuated by the abbey’s excavators.

Virtual Cilicia Project. How to use Google Earth as a visualization environment in an archaeological context

Over the past few years, archaeology has experienced a rapid development in geophysical prospection and remote sensing techniques. At the same time, the focus of archaeological research has shifted to landscape evelopment and human interaction. To impart the results, new methods and techniques are necessary. Virtual globes such as Google Earth offer fascinating methods of giving interested amateurs the possibility to interactively explore ancient cities and landscapes. Thanks to the increasing usage of GIS in cultural heritage, the implementation of interactive three dimensional learning opportunities becomes less and less tedious, but the non-linear narrative story telling medium demands for a special adaption of the content. This paper summarizes the experience gained during the realization of the “Virtual Cilicia Project” and outlines the future potential of virtual globes in the field of cultural heritage.

Encounters and content sharing in an urban village : reading texts through an archaeological lens

Archaeology provides a framework of analysis and interpretation that is useful for disentangling the textual layers of a contemporary lived-in urban space. The producers and readers of texts may include those who planned and developed the site and those who now live, visit and work there. Some of the social encounters and content sharing between these people may be artificially produced or manufactured in the hope that certain social situations will occur. Others may be serendipitous. With archaeology’s original focus on places that are no longer inhabited it is often only the remaining artefacts and features of the built environment that form the basis for interpreting the social relationships of past people. Our analysis however, is framed within a contemporary notion of archaeological artefacts in an urban setting. Unlike an excavation, where the past is revealed through digging into the landscape, the application of landscape archaeology within a present day urban context is necessarily more experiential, visual and based on recording and analysing the physical traces of social encounters and relationships between residents and visitors. These physical traces are present within the creative content, and the built and natural elements of the environment. This chapter explores notions of social encounters and content sharing in an urban village by analysing three different types of texts: the design of the built environment; content produced by residents through a geospatial web application; and, print and online media produced in digital storytelling workshops.

Raman spectroscopic study of the mineral thorikosite Pb3(OH)(SbO3,AsO3)Cl2 : a mineral of archaeological significance

The mineral thorikosite Pb3(OH)(SbO3,AsO3)Cl2 is named after the ancient city of Thorikos, in the region of Attica, where the ancient mine sites dating back to the bronze ages are found. Raman spectra of the antimonate bearing mineral thorikosite Pb3(OH)(SbO3,AsO3)Cl2 were studied, and related to the structure of the mineral. Two intense Raman peaks are observed at 596 and 730 cm-1 and are assigned to the Sb3+O3 and As3+O3 stretching vibrations. A peak at 1085 cm-1 is assigned to the Sb3+OH deformation mode. Raman band at 325 cm-1 is assigned to an OAsO bending vibration of the As3+O3 units and the bands at 269 and 275 cm-1 are attributed to the OSbO bending modes of the Sb3+O3 units. The intense Raman bands at 112 and 133 cm-1 are associated with PbCl stretching modes. Minerals such as nealite and thorikosite are minerals of archaeological significance. Yet no spectroscopic studies of these minerals have been undertaken.