Influence of application mode of universal adhesives on bond strength performances and enzymatic activity of coronal and radicular dentin

Objective: The aims of this thesis were to analyze the application mode of the universal adhesives (UA) and to give instructions for clinical procedures. The etching mode of UA on the bond strength to dentin and on the risk of retention, marginal discoloration, marginal adaptation and post-operative sensitivity (POS) was analyzed by two systematic reviews. Three in vitro studies were conducted: 1) evaporation mode of a UA on coronal dentin; 2) cementation approach on radicular dentin; 3) adhesion of metal brackets to enamel. Materials and methods: Two systematic review were conducted firstly, then in vitro study to investigate the evaporation mode in presence or not of pulpal pressure by means of μTBS, and the enzymatic activity using in situ zymography, at T0 and T6. The cementation of a fiber into radicular dentin with different resin-cements was studied, by push-out bond strength evaluation. Orthodontic brackets were cemented according to 4 adhesive protocols and shear bond strength test was conducted. Two adhesive removal techniques were evaluated, and spectrophotometry was used. Results: The probability of POS occurrence was less in SE. SEE approach seems to perform better than SE. Air-drying resulted in higher μTBS. Suction-evaporation, aging and ER mode increased MMPs activity. Differences in NL expression were present at T0 for fiber post study, and the aging produced an increase in marginal infiltration. Brackets cemented with new universal cement with previous etchant application showed good μTBS values. Conclusion: SEE performed better than SE and TE with UA in terms of uTBS. Evaporating with air-drying is better for UA in terms of uTBS and enzymatic activity. Aging and choice of resin cement for cementation of fiber posts influenced the PBS. Brackets cementation with a new resin- cement seems to offer the highest bond strength and leaves more cement remnants after the bracket removal.

Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin?

Objectives: This study evaluated the immediate and 6-month resin-dentin mu-bond strength (mu TBS) of one-step self-etch systems (Adper Prompt L-Pop [AD] 3M ESPE; Xeno III [XE] Dentsply De Trey; iBond [iB] Heraeus Kulzer) under different application modes. Materials and methods: Dentin oclusal surfaces were exposed by grinding with 600-grit SiC paper. The adhesives were applied according to the manufacturer`s directions [MD], or with double application of the adhesive layer [DA] or following the manufacturer`s directions plus a hydrophobic resin layer coating [HL]. After applying the adhesive resins, composite crowns were built up incrementally. After 24-h water storage, the specimens were serially sectioned in ""x"" and ""y"" directions to obtain bonded sticks of about 0.8 mm 2 to be tested immediately [IM] or after 6 months of water storage [6M] at a crosshead speed of 0.5 mm/min. The data from each adhesive was analyzed by a two-way repeated measures ANOVA (mode of application vs. storage time) and Tukey`s test (alpha = 0.05). Results: The adhesives performed differently according to the application mode. The DA and HL either improved the immediate performance of the adhesive or did not differ from the MD. The resin-dentin bond strength values observed after 6 months were higher when a hydrophobic resin coat was used than compared to those values observed under the manufacturer`s directions. Conclusions: The double application of one-step self-etch system can be safety performed however the application of an additional hydrophobic resin layer can improve the immediate resin-dentin bonds and reduce the degradation of resin bonds over time. (c) 2008 Elsevier Ltd. All rights reserved.

Influence of Blood Contamination on Bond Strength of a Self-etching Adhesive to Dental Tissues

Purpose: The aim of this study was to detect the influence of (1) storage period of heparinized blood, (2) type of blood and presence of contaminant, (3) application mode of cleansing agents, and (4) efficacy of cleansing agents on contaminated enamel and dentin during the adhesion process of a one-step adhesive system. Materials and Methods: One hundred four human molars were sectioned into halves along the long axis for enamel and dentin tests. Heparinized and fresh blood were obtained from the same donor, applied and dried to maintain a layer of dry blood on the top of samples. The cleansing agents used were hydrogen peroxide, anionic detergent, and antiseptic solution. A one-step adhesive system (Clearfil S3 Bond) was applied on the dental surface, and composite resin cylinders were built up using Tygon tubing molds. After 24 h, the mu SBS test (1 mm/min) and fracture analysis were performed. Results: There was no statistically significant difference in bond strength values regarding the storage period of heparinized blood and the types of blood. Groups without contamination presented higher bond strengths than contaminated groups. The application mode of the cleansing agents had no influence on bond strength results. There was no statistically significant difference among cleansing agents and they were as effective as a water stream in counteracting the effect of blood contamination. Conclusion: Heparinized blood can be used as a contaminant for up to one week, and it is a reliable procedure to standardize the contaminant. The cleansing agents can be used without friction. A water stream is sufficient to remove blood contamination from dental tissues, before the application of a one-step adhesive system.

Systematic assessment of items influencing Crohn's disease patient's preferences in selecting an anti-TNF agent (Choose TNF trial)

Background and Aims: The three anti-TNF agents infliximab (IFX), adalimumab (ADA) andcertolizumab pegol (CZP) have demonstrated similar efficacy in induction and maintenanceof response and remission in Crohn's disease (CD) treatment. Given the comparability ofthese drugs, patient's preferences may influence the choice of the product. However, dataon patient's preferences for choosing anti-TNF agents are lacking. We therefore aimed toassess the CD patient's appraisal to select the drug of his choice and to identify factorsguiding this decision.Methods: A prospective survey among anti-TNF-naive CD patientswas performed. Patients were provided a description of the three anti-TNF agents focusingon indication, application mode (s.c. vs. i.v.), application time intervals, setting of application(hospital vs. private practice vs. patient's home), average time to apply the medication permonth, typical side effects, and the scientific evidence of efficacy and safety available for everydrug. Patients answered a questionnaire consisting of 17 questions, covering demographic,disease-specific, and medication data.Results: Hundred patients (47f/53m, mean age 45±16years) completed the questionnaire. Disease duration was <1year in 7%, 1-5 years in 31%,and >5 years in 62% of patients. Disease location was ileal in 33%, colonic in 40%, andileocolonic in 27%. Disease phenotype was inflammatory in 68%, stenosing in 29%, andinternally fistulizing in 3% of patients. Additionally, 20% had perianal fistulizing disease.Patients were already treated with the following drugs: mesalamines 61%, budesonide 44%,prednisone 97%, thiopurines 78%, methotrexate 16%. In total, 30% had already heardabout IFX, 20% about ADA, and 11% about CZP. Thirty-six percent voted for treatmentwith ADA, 28% for CZP, and 25% for IFX, whereas 11% were undecided. The followingfactors influenced the patient's decision for choosing a specific anti-TNF drug (severalanswers possible): side effects 76%, physician's recommendation 66%, application mode54%, efficacy experience 52%, time to spend for therapy 27%, patient's recommendations21%, interactions with other medications 12%. The single most important factor for choosinga specific anti-TNF was (1 answer): side effect profile 35%, physician's recommendation22%, efficacy experience 21%, application mode 13%, patient's recommendations 5%, timespent for therapy 3%, interaction with other medications 1%.Conclusions: The majority ofpatients preferred anti-TNF syringes to infusions. The safety profile of the drugs and thephysician's recommendation are major factors influencing the patient's choice for a specificanti-TNF drug. Patient's issues about safety and lifestyle habits should be taken into accountwhen prescribing specific anti-TNF formulations.

Iron Supplementation Therapy in a Large Swiss Cohort of Inflammatory Bowel Disease Patients: Shift from Oral to Intravenous Therapy over Time

Background a nd A ims: T he 2 007 ECCO g uidelines o nanemia in inflammatory bowel disease (IBD) favour intravenous(iv) over oral (po) i ron supplementation due to bettereffectiveness and tolerance. Application of guidelines in clinicalpractice m ay r equire time. We a imed to determine thepercentage of IBD patients under iron supplementation therapyand its application mode over time in a large IBD cohort.Methods: Helsana, a leading Swiss health insurance companyprovides c overage f or approximately 18% of t he Swisspopulation, corresponding to about 1.2 million enrollees.Patients with Crohn's disease (CD) and ulcerative colitis (UC)were identified b y keyword search from t he a nonymisedHelsana database.Results: I n total, 6 29 CD ( 61% female) a nd 4 03 UC ( 56%female) patients w ere identified, mean retrospectiveobservation time w as 2 0.4 m onths f or CD and 13 m onths f orUC patients. Of t he entire study population, 29.3% wereprescribed iron. O ccurrence of iron prescription was 21.3% inmales a nd 31.2% in f emales ( odds r atio [OR] 1 .69, 95%-confidence interval [CI] 1.26-2.28). The prescription of iv i ronincreased from 2006/2007 ( 48.8% w ith iv i ron) to 2 008/2009(65.2% with iv iron) by a factor of 1.89.Conclusions: One third of the IBD population was treated withiron supplementation. A gradual s hift from oral t o iv iron wasobserved over time in a large Swiss IBD cohort. This switch inprescription habits g oes a long with the implementation of theECCO consensus guidelines on anemia in IBD.

Photocatalytic oxidation of humic substances and lignins in aqueous solutions

Tässä tutkimuksessa tarkastellaan kahden yleisen, veden ympäristökuormitusta aiheuttavan kemikaaliryhmän, ligniinin ja humusaineiden, fotokatalyyttistahapetusta (photocatalytic oxidation, PCO) vesiliuoksessa. Fotokatalyyttina käytettiin titaanidioksidia, jota säteilytettiin ultraviolettivalolla. Työssä selvitettiin useiden eri olosuhdeparametrien vaikutusta fotokatalyysiin. Tutkittavia parametreja olivat mm. kontaminanttien alkukonsentraatio, pH, vetyperoksidilisäys, rauta-ionien lisäys, fotokatalyysimenetelmä, fotokatalyytin pintakonsentraatioja titaanidioksidin määrä lasisissa mikropartikkeleissa. Ultraviolettivalon lähteinä käytettiin sekä keinovaloa että auringonvaloa. Katalyytin kantoaineena käytettiin huokoisia lasisia mikropartikkeleita, joiden pintaan kiinnittynyt titaanidioksidi pystyi hyvin vähentämään kontaminanttien määrää vedessä. Fotokatalyysin tehokkuus kasvoi humusaine- ja ligniinikonsentraatioiden kasvaessa. Korkeimmat hapetustehokkuudet kumallakin kontaminantilla saavutettiin neutraaleissa jalievästi emäksisissä olosuhteissa huolimatta siitä, että paras adsorboituminen tapahtui happamissa olosuhteissa. Tämän perusteella voidaan olettaa, että humusaineiden ja ligniinin hapetus tapahtuu pääosin radikaalimekanismilla. Vetyperoksidin lisääminen humusaineliuokseen lisäsi hapettumisnopeutta, vaikka näennäinen hapetustehokkuus ei muuttunut. Tämän perusteella vetyperoksidi hapetti myös humusaineita referenssinäytteessä. Ligniinin fotokatalyyttinen hapettuminen parani vetyperoksidilisäyksellä happamissa olosuhteissa johtuen lisääntyneestä OH-radikaalien muodostumisesta. Ligniini ei hapettunut vetyperoksidilla, jos fotokatalyyttiä ei¿ollut läsnä. Rauta-ionit eivät lisänneet humushappojen fotokatalyyttistähapettumista, mutta Fe2+-ionien lisäys aina konsentraatioon 0.05 mM johti ligniinin hapettumistehokkuuden voimakkaaseen kasvuun. Rauta-ionikonsentraation kasvattaminen edelleen johti ligniinin hapetustehokkuuden alenemiseen.

Model-based groupware solution for distributed real-time collaborative 4D planning via teamwork

Construction planning plays a fundamental role in construction project management that requires team working among planners from a diverse range of disciplines and in geographically dispersed working situations. Model-based four-dimensional (4D) computer-aided design (CAD) groupware, though considered a possible approach to supporting collaborative planning, is still short of effective collaborative mechanisms for teamwork due to methodological, technological and social challenges. Targeting this problem, this paper proposes a model-based groupware solution to enable a group of multidisciplinary planners to perform real-time collaborative 4D planning across the Internet. In the light of the interactive definition method, and its computer-supported collaborative work (CSCW) design analysis, the paper discusses the realization of interactive collaborative mechanisms from software architecture, application mode, and data exchange protocol. These mechanisms have been integrated into a groupware solution, which was validated by a planning team in a truly geographically dispersed condition. Analysis of the validation results revealed that the proposed solution is feasible for real-time collaborative 4D planning to gain a robust construction plan through collaborative teamwork. The realization of this solution triggers further considerations about its enhancement for wider groupware applications.

Associação do óleo de mamona com Beauveria bassiana no controle da traça-das-crucíferas

O objetivo deste trabalho foi avaliar a eficiência, a estabilidade, a forma de aplicação e a compatibilidade do óleo de mamona com o fungo entomopatogênico Beauveria bassiana no controle da traça-das-crucíferas, Plutella xylostella. No primeiro experimento, foram avaliadas a eficiência, a estabilidade após 70 dias de armazenamento e a forma de aplicação do óleo de mamona. No segundo experimento, foi avaliada a compatibilidade do óleo de mamona com B. bassiana. A atividade inseticida do óleo de mamona é instável ao longo do tempo. O óleo de mamona é compatível com B. bassiana no controle de P. xylostella.

Produtividade e qualidade de cana-de-açúcar cultivada em solo tratado com lodo de esgoto, vinhaça e adubos minerais

O uso agrícola de resíduos orgânicos, de origem agrícola, urbana ou industrial, é uma interessante alternativa de disposição, permitindo a reciclagem de nutrientes (NPK) nos ecossistemas. Este trabalho avaliou o efeito da aplicação de lodo de esgoto como fonte de N e de vinhaça como fonte de K comparado ao uso de fontes minerais desses nutrientes sobre a produtividade e variáveis agroindustriais da cana-de-açúcar, por dois anos consecutivos (cana-planta e cana-soca). O experimento foi conduzido em Latossolo Vermelho-Amarelo distrófico típico, em Pontal - SP, e a variedade de cana-de-açúcar avaliada foi a SP 81-3250. Utilizou-se de esquema fatorial 3x2x2+1, ou seja, três tipos de resíduos (lodo de esgoto + KCl; vinhaça + uréia, e lodo de esgoto + vinhaça); dois modos de aplicação (na linha de plantio ou em área total); duas doses (100 e 200% do N e K necessários à cultura) e um tratamento adicional com adubação mineral, sendo os tratamentos distribuídos na área em blocos ao acaso, com três repetições. Foram avaliadas a produtividade e as variáveis agroindustriais (°brix, pol no caldo, fibra, pureza, pol na cana, AR e ATR). As produtividades de colmo e de açúcar para cana-planta foram mantidas quando N e K foram fornecidos pelo lodo de esgoto e vinhaça, respectivamente. A cana-soca apresentou maior produtividade de colmo e de açúcar quando foram utilizados os resíduos separadamente, complementados com fontes minerais. Quanto ao modo de aplicação, não foram observadas diferenças significativas para as variáveis analisadas.

Aspectos econômicos da adubação fosfatada para cultura do milho

Estudos econômicos da adubação fosfatada fazem-se necessários, em razão da sua participação expressiva no custo de produção da cultura do milho, especialmente em solos sob vegetação de cerrado e face à competitividade da atividade no mercado globalizado. Assim, objetivou-se avaliar alguns aspectos econômicos de modos de aplicação da adubação fosfatada a lanço e sulco simples comparados ao modo alternativo em sulco duplo, utilizando o híbrido de milho BR 3123. Os tratamentos foram constituídos pelos modos de aplicação em sulco duplo, sulco simples e a lanço nas doses: 0; 0,50; 0,75; 1,00; 1,25; 1,50 vez a dose recomendada para adubação de manutenção para o milho, ou seja, 90 kg de P2O5 ha-1. Para a análise, considerou-se o preço médio da década de 90 para a tonelada do milho e do superfosfato triplo em R$189,33 e R$494,32, respectivamente, e o custo operacional total de R$ 752,90 ha-1. O aumento das doses de adubo fosfatado, em geral, incrementou a produção, o valor da produção e a receita líquida por hectare; a aplicação do adubo fosfatado a lanço não se mostrou viável economicamente; o modo alternativo em sulco duplo permitiu maior receita líquida e uma relação benefício/custo 17,7% superior, em relação ao sulco simples.

Dose, parcelamento e modo de aplicação de nitrogênio em atributos nutricionais, agronômicos e tecnológicos de cultivares de sorgo sacarino

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Validação das escalas de preocupação com o peso corporal e de estresse percebido

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seletividade de herbicidas na cultura de crambe

The low productivity of crambe can be associated with many factors, among these, the competition with weeds, which reduces the yield, harvest affects and contributes to the increase in seed moisture. Therefore, this study aimed to evaluate the tolerance of crambe plants cv. FMS Brilhante to herbicides applied in preplant incorporated (PPI), preemergence (PRE), and postemergence (POST). The study was installed in a green-house and the treatments consisted of the herbicide application in: pre-plant incorporated ofdiclosulam, flumetsulam, metribuzin, and trifluralin; preemergence applicationof atrazine, diclosulam, diuron, flumetsulam, metribuzim, S-metolachlor, sulfentrazone, and trifluralin; and postemergence application ofbentazon, carfentrazone-ethyl, clefoxydim, cletodim + fenoxaprop-p-ethyl, ethoxysulfuron, fomesafen, fluazifop-p-butyl, flumioxazin, halosulfuron, imazamox, imazapic, lactofen, nicosulfuron, oxadiazon, quinclorac, and setoxydim. Visual evaluations of phytotoxicity on crambe plants were realized after applications, the seedlings were counted and the height and plant dry matter were determined in the end of the evaluation period. In conditions where the studies were conducted, we can conclude that only the trifluralin application in PRE and the application of clefoxidim+fenoxaprop-p-ethyl, fluazifop-p-butyl, quinclorac, setoxydim and clefoxydim in POST showed selectivity and potential use for FMS Brilhante crambe cultivar.

Fluid meters; report.

pt. 1. Their theory and application.

Validação do instrumento dos indicadores observáveis da qualidade do cuidado em instituições de longa permanência para idosos

The Nursing Homes are an important alternative care in the world, but Brazil still has no valid instrument to monitor the quality these institutions. In the United States, the Observable Indicators of Nursing Home Care Quality Instrument (OIQ) is used to assess the quality of Nursing Home care using 30 indicators of structure (2 dimensions) and process (5 dimensions) related to quality person-centered care. The present study aimed at cross-culturally adapting the OIQ in order to evaluate the quality of Nursing Home care in Brazil. Conceptual and item equivalence were determined to assess the relevance and viability of OIQ in the Brazilian context, using the Content Validity Index (CVI) and a group of specialists composed of 10 participants directly involved in the object of study. Next, operational, idiomatic and semantic equivalence were carried out concurrently. This consisted of 5 phases: (1) two translations and (2) their respective back translations; (3) formal appraisal of referential and general meaning; (4) review by a second group of specialists; (5) application of the pretest at three Nursing Homes by different social entities: health professionals, sanitary surveillance regulators and potential consumers. Measurement equivalence was evaluated by the Cronbach’s alpha test to verify the internal consistency of the instrument. To measure inter-evaluator agreement, the General Agreement Index (ICG) and Kappa coefficient were used. Timely compliance and 95% Confidence Interval of indicators, dimensions and total construct were estimated. The CVI obtained high results for both relevance (95.3%) and viability (94.3%) in the Brazilian context. With respect to referential meaning, similarity was observed, ranging between 90-100% for the first back translation and 70-100% for the second. In relation to general meaning, version 1 was better, classified as “unchanged” in 80% of the items, whereas in version 2 it was only 47%. In the pretest, the OIQ was easy to understand and apply. The following outcomes were obtained: a high Cronbach’s alpha (0.93), satisfactory ICG (75%) and substantial agreement between the pairs of evaluators (health professionals, regulators from the Superintendency of Sanitary Surveillance –SUVISA-, and potential consumers), according to the Kappa coefficient (0.65). It´s possible take the operational equivalence held since it preserved the original layout in the Brazilian version from the maintenance in application mode, response options, number of items, statements and scores. The performance of nursing homes obtained approximate average scores of 87, a variation 55-111 considering a range from 30 to 150 points. The worst outcomes were related to process indicators with a mean of 2.8 per item, while structure was 3.75 on a scale of 1 to 5. The lowest score was obtained for the care dimension (mean 2). The OIQ version was deemed to be a valid and reliable instrument in the Brazilian context. It is recommended that health professionals, regulators and potential consumers adopt it to access and monitor the quality of Nursing Home care and demonstrating opportunities for improvement.