A mixture theory based method for three-dimensional modeling of reinforce concrete members with embedded crack finite elements

The paper presents a methodology to model three-dimensional reinforced concrete members by means of embedded discontinuity elements based on the Continuum Strong Discontinuous Approach (CSDA). Mixture theory concepts are used to model reinforced concrete as a 31) composite material constituted of concrete with long fibers (rebars) bundles oriented in different directions embedded in it. The effects of the rebars are modeled by phenomenological constitutive models devised to reproduce the axial non-linear behavior, as well as the bond-slip and dowel action. The paper presents the constitutive models assumed for the components and the compatibility conditions chosen to constitute the composite. Numerical analyses of existing experimental reinforced concrete members are presented, illustrating the applicability of the proposed methodology.

Comparative study of some constitutive equations characterising non-Newtonian fluids

This paper compares, in a general way, the predictions of the constitutive equations given by Rivlin and Ericksen, Oldroyd, and Walters. Whether we consider the rotational problems in cylindrical co-ordinates or in spherical polar co-ordinates, the effect of the non-Newtonicity on the secondary flows is collected in a single parameterα which can be explicitly expressed in terms of the non-Newtonian parameters that occur in each of the above-mentioned constitutive equations. Thus, for a given value ofα, all the three fluids will have identical secondary flows. It is only through the study of appropriate normal stresses that a Rivlin-Ericksen fluid can be distinguished from the other two fluids which are indistinguishable as long as this non-Newtonian parameter has the same value.

The application of B-P constitutive equations in finite element analysis of high velocity impact

We present in this paper the application of B-P constitutive equations in finite element analysis of high velocity impact. The impact process carries out in so quick time that the heat-conducting can be neglected and meanwhile, the functions of temperature in equations need to be replaced by functions of plastic work. The material constants in the revised equations can be determined by comparison of the one-dimensional calculations with the experiments of Hopkinson bar. It can be seen from the comparison of the calculation with the experiment of a tungsten alloy projectile impacting a three-layer plate that the B-P constitutive equations in that the functions of temperature were replaced by the functions of plastic work can be used to analysis of high velocity impact.

A theory of rational spatial agglomerations

We model the behavior of rational forward-looking agents in a spatial economy. The economic geography structure is built on Fujita et al. (1999)'s racetrack economy. Workers choose optimally what to consume at each period, as well as which spatial itinerary to follow in the geographical space. The spatial extent of the resulting agglomerations increases with the taste for variety and the expenditure share on manufactured goods, and decreases with transport costs. Because forward-looking agents anticipate the future formation of agglomerations, they are more responsive to spatial utility differentials than myopic agents. As a consequence, the emerging agglomerations are larger under perfect foresight spatial adjustments than under myopic ones.

The growth rate and dimension theory of beta-expansions

In a recent paper of Feng and Sidorov they show that for β∈(1,(1+5√)/2) the set of β-expansions grows exponentially for every x∈(0,1/(β−1)). In this paper we study this growth rate further. We also consider the set of β-expansions from a dimension theory perspective.

Differential equations; geometric theory.

Mode of access: Internet.

Ductile fracture by multiple void growth and interaction ahead of a notch tip in polycrystalline plastic solids

The objectives of this paper are to study the effects of plastic anisotropy and evolution in crystallographic texture with deformation on the ductile fracture behaviour of polycrystalline solids. To this end, numerical simulations of multiple void growth and interaction ahead of a notch tip are performed under mode I, plane strain, small scale yielding conditions using two approaches. The first approach is based on the Hill yield theory, while the second employs crystal plasticity constitutive equations and a Taylor-type homogenization in order to represent the ductile polycrystalline solid. The initial textures pertaining to continuous cast Al-Mg AA5754 sheets in recrystallized and cold rolled conditions are considered. The former is nearly-isotropic, while the latter displays pronounced anisotropy. The results indicate distinct changes in texture in the ligaments bridging the voids ahead of the notch tip with increase in load level which gives rise to retardation in porosity evolution and increase in tearing resistance for both materials.

A finite element analysis of quasistatic crack growth in a pressure sensitive constrained ductile layer

Polymeric adhesive layers are employed for bonding two components in a wide variety of technological applications, It has been observed that, unlike in metals, the yield behavior of polymers is affected by the state of hydrostatic stress. In this work, the effect of pressure sensitivity of yielding and layer thickness on quasistatic interfacial crack growth in a ductile adhesive layer is investigated. To this end, finite deformation, finite element analyses of a cracked sandwiched layer are carried out under plane strain, small-scale yielding conditions for a wide range of mode mixities. The Drucker-Prager constitutive equations are employed to represent the behavior of the layer. Crack propagation is simulated through a cohesive zone model, in which the interface is assumed to follow a prescribed traction-separation law. The results show that for a given mode mixity, the steady state Fracture toughness [K](ss) is enhanced as the degree of pressure sensitivity increases. Further, for a given level of pressure sensitivity, [K](ss) increases steeply as mode Il loading is approached. (C) 2000 Elsevier Science Ltd. All rights reserved.

Do Households Have Rational Expectations on Future Consumption? Evidence from the Finnish Consumer Survey

Ever since its initial introduction some fifty years ago, the rational expectations paradigm has dominated the way economic theory handles uncertainty. The main assertion made by John F. Muth (1961), seen by many as the father of the paradigm, is that expectations of rational economic agents should essentially be equal to the predictions of relevant economic theory, since rational agents should use information available to them in an optimal way. This assumption often has important consequences on the results and interpretations of the models where it is applied. Although the rational expectations assumption can be applied to virtually any economic theory, the focus in this thesis is on macroeconomic theories of consumption, especially the Rational Expectations–Permanent Income Hypothesis proposed by Robert E. Hall in 1978. The much-debated theory suggests that, assuming that agents have rational expectations on their future income, consumption decisions should follow a random walk, and the best forecast of future consumption level is the current consumption level. Then, changes in consumption are unforecastable. This thesis constructs an empirical test for the Rational Expectations–Permanent Income Hypothesis using Finnish Consumer Survey data as well as various Finnish macroeconomic data. The data sample covers the years 1995–2010. Consumer survey data may be interpreted to directly represent household expectations, which makes it an interesting tool for this particular test. The variable to be predicted is the growth of total household consumption expenditure. The main empirical result is that the Consumer Confidence Index (CCI), a balance figure computed from the most important consumer survey responses, does have statistically significant predictive power over the change in total consumption expenditure. The history of consumption expenditure growth itself, however, fails to predict its own future values. This indicates that the CCI contains some information that the history of consumption decisions does not, and that the consumption decisions are not optimal in the theoretical context. However, when conditioned on various macroeconomic variables, the CCI loses its predictive ability. This finding suggests that the index is merely a (partial) summary of macroeconomic information, and does not contain any significant private information on consumption intentions of households not directly deductible from the objective economic variables. In conclusion, the Rational Expectations–Permanent Income Hypothesis is strongly rejected by the empirical results in this thesis. This result is in accordance with most earlier studies conducted on the topic.

Influence of crack tip constraint on void growth in ductile FCC single crystals

Effect of constraint (stress triaxiality) on void growth near a notch tip in a FCC single crystal is investigated. Finite element simulations within the modified boundary layer framework are conducted using crystal plasticity constitutive equations and neglecting elastic anisotropy. Displacement boundary conditions based on model, elastic, two term K-T field are applied on the outer boundary of a large circular domain. A pre-nucleated void is considered ahead of a stationary notch tip. The interaction between the notch tip and the void is studied under different constraints (T-stress levels) and crystal orientations. It is found that negative T-stress retards the mechanisms of ductile fracture. However, the extent of retardation depends on the crystal orientation. Further, it is found that there exists a particular orientation which delays the ductile fracture processes and hence can potentially improve ductility. This optimal orientation depends on the constraint level. (C) 2010 Published by Elsevier B.V.

The elasto-damage theory of the components assembling model

The potential energy in materials is well approximated by pair functional which is composed of pair potentials and embedding energy. During calculating material potential energy, the orientational component and the volumetric component are derived respectively from pair potentials and embedding energy. The sum of energy of all these two kinds of components is the material potential. No matter how microstructures change, damage or fracture, at the most level, they are all the changing and breaking atomic bonds. As an abstract of atomic bonds, these components change their stiffness during damaging. Material constitutive equations have been formulated by means of assembling all components' response functions. This material model is called the component assembling model. Theoretical analysis and numerical computing indicate that the proposed model has the capacity of reproducing some results satisfactorily, with the advantages of great conceptual simplicity, physical explicitness, and intrinsic induced anisotropy, etc.

Long-term return reversals-Value and growth or tax? UK evidence

This paper examines (i) whether value-growth characteristics have more power than past performance in predicting return reversals; and (ii) whether typical rational behaviour such as incentives to delay paying capital gain taxes can better explain long-term reversals than past performance. We find that value-growth characteristics generally provide better explanations for long-term stock returns than past performance. The evidence also shows that winners identified by capital gains dominate past performance winners in predicting reversals in the cross-sectional comparison. However, in the time-series analysis, when returns on capital gain winners are adjusted by the Fama and French (1996) risk factors, the predictive power of capital gain winners disappears. Our results show that capital gain winners are heavily featured as growth stocks. Return reversals in capital gain winners potentially reflect market price corrections for growth stocks. We conclude that investors’ incentives to delay paying capital gain taxes cannot fully rationalise long-term reversals in the UK market. Our results also imply that the long-term return pattern potentially reflects a mixture of investor rational and irrational behaviour.