The effect of 17-B estradiol therapy on bone mineral density and structure of alveolar bone in the ovariectomized rat model of postmenopausal osteoporosis

The ovariectomized (OVX) rat, a preclinical model for studying postmenopausal bone loss, may also be used to study differences in alveolar bone (AB). The objectives of this study were to quantify the differences in AB following estrogen replacement therapy (ERT), and to investigate the relationship between AB structure and density, and trabecular bone at the femoral neck (FN) and third lumbar vertebral body (LB3). Estrogen treated rats had a higher bone volume fraction (BV/TV) at the AB region (9.8% P < 0.0001), FN (12% P < 0.0001), and LB3 (11.5% P < 0.0001) compared to the OVX group. BV/TV of the AB was positively correlated with the BV/TV at the FN (r = 0.69 P < 0.0001) and the LB3 (r = 0.75 P < 0.0001). The trabecular number (Tb.N), trabecular separation (Tb.Sp), and structure model index (SMI) were also positively correlated (P < 0.05) between the AB and FN (r = 0.42, 0.49, and 0.73, respectfully) and between the AB and LB3 (r = 0.44, 0.63, and 0.69, respectfully). Given the capacity of AB to respond to ERT, future preclinical drug/nutritional intervention studies aimed at improving skeletal health should include the AB as a region of interest (ROI).

The H2S-releasing naproxen derivative, ATB-346, inhibits alveolar bone loss and inflammation in rats with ligature-induced periodontitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da ovariectomia sobre os tecidos periodontais após o reimplante dentário imediato: análise histomorfométrica, imunoistoquímica e micro-ct em ratas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Decrease in the number and apoptosis of alveolar bone osteoclasts in estrogen-treated rats

Bone is a mineralized tissue that is under the influence of several systemic, local and environmental factors. Among systemic factors, estrogen is a hormone well known for its inhibitory function on bone resorption. As alveolar bone of young rats undergoes continuous and intense remodeling to accommodate the growing and erupting tooth, it is a suitable in vivo model for using to study the possible action of estrogen on bone. Thus, in an attempt to investigate the possibility that estrogen may induce the death of osteoclasts, we examined the alveolar bone of estrogen-treated rats.Fifteen, 22-d-old female rats were divided into estrogen, sham and control groups. The estrogen group received estrogen and the sham group received corn oil used as the dilution vehicle. After 8 d, fragments containing alveolar bone were removed and processed for light microscopy and transmission electron microscopy. Sections were stained with hematoxylin and eosin and tartrate-resistant acid phosphatase (TRAP)-an osteoclast marker. Quantitative analysis of the number of TRAP-positive osteoclasts per mm of bone surface was carried out. For detecting apoptosis, sections were analyzed by the Terminal deoxynucleotidyl transferase-mediated dUTP Nick-End Labeling (TUNEL) method; TUNEL/TRAP combined methods were also used.The number of TRAP-positive osteoclasts per mm of bone surface was significantly reduced in the estrogen group compared with the sham and control groups. TRAP-positive osteoclasts exhibiting TUNEL-positive nuclei were observed only in the estrogen group. In addition, in the estrogen group the ultrastructural images revealed shrunken osteoclasts exhibiting nuclei with conspicuous and tortuous masses of condensed chromatin, typical of apoptosis.Our results reinforce the idea that estrogen inhibits bone resorption by promoting a reduction in the number of osteoclasts, thus indicating that this reduction may be, at least in part, a consequence of osteoclast apoptosis.

Immunohistochemical detection of estrogen receptor beta in alveolar bone cells of estradiol-treated female rats: possible direct action of estrogen on osteoclast life span

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Structural and functional changes in the alveolar bone osteoclasts of estrogen-treated rats

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of chronic alcoholism and oestrogen deficiency on the variation of stoichiometry of hydroxyapatite within alveolar bone crest of rats

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of different durations of estrogen deficiency on alveolar bone loss in rats

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The influence of ovariectomy, simvastatin and sodium alendronate on alveolar bone in rats

Bisphosphonates are currently used in the treatment of many diseases involving increased bone resorption such as osteoporosis. Statins have been widely used for the treatment of hypercholesterolemia and recent studies have shown that these drugs are also capable of stimulating bone formation. The purpose of this study was to evaluate thel influence of an estrogen deficient state and the effects of simvastatin and sodium alendronate therapies on alveolar bone in female rats. Fifty-four rats were either ovariectomized (OVX) or sham operated. A month later, the animals began to receive a daily dose of simvastatin (SIN - 25 mg/kg), sodium alendronate (ALN - 2 mg/kg) or water (control) orally. Thirty-five days after the beginning of the treatment, the rats were sacrificed and their left hemimandibles were removed and radiographed using digital X-ray equipment. The alveolar radiographic density under the first molar was determined with gray-level scaling and the values were submitted to analysis of variance (α = 5%). Ovariectomized rats gained more weight (mean ± standard deviation: 20.06 ± 6.68%) than did the sham operated animals (12.13 ± 5.63%). Alveolar radiographic density values, expressed as gray levels, were lowest in the OVX-water group (183.49 ± 6.47), and differed significantly from those observed for the groups receiving alendronate (sham-ALN: 193.85 ± 3.81; OVX-ALN: 196.06 ± 5.11) and from those of the sham-water group (193.66 ± 4.36). Other comparisons between groups did not show significant differences. It was concluded that the ovariectomy reduced alveolar bone density and that alendronate was efficient for the treatment of this condition.

Micro-FEM models based on micro-CT reconstructions for the in vitro characterization of the elastic properties of trabecular bone tissue.

This master’s thesis describes the research done at the Medical Technology Laboratory (LTM) of the Rizzoli Orthopedic Institute (IOR, Bologna, Italy), which focused on the characterization of the elastic properties of the trabecular bone tissue, starting from october 2012 to present. The approach uses computed microtomography to characterize the architecture of trabecular bone specimens. With the information obtained from the scanner, specimen-specific models of trabecular bone are generated for the solution with the Finite Element Method (FEM). Along with the FEM modelling, mechanical tests are performed over the same reconstructed bone portions. From the linear-elastic stage of mechanical tests presented by experimental results, it is possible to estimate the mechanical properties of the trabecular bone tissue. After a brief introduction on the biomechanics of the trabecular bone (chapter 1) and on the characterization of the mechanics of its tissue using FEM models (chapter 2), the reliability analysis of an experimental procedure is explained (chapter 3), based on the high-scalable numerical solver ParFE. In chapter 4, the sensitivity analyses on two different parameters for micro-FEM model’s reconstruction are presented. Once the reliability of the modeling strategy has been shown, a recent layout for experimental test, developed in LTM, is presented (chapter 5). Moreover, the results of the application of the new layout are discussed, with a stress on the difficulties connected to it and observed during the tests. Finally, a prototype experimental layout for the measure of deformations in trabecular bone specimens is presented (chapter 6). This procedure is based on the Digital Image Correlation method and is currently under development in LTM.

Alveolar bone regeneration in response to local application of calcitriol in vitamin D deficient rats

AIM Vitamin D deficiency is considered to diminish bone regeneration. Yet, raising the serum levels takes months. A topic application of the active vitamin D metabolite, calcitriol, may be an effective approach. Thus, it becomes important to know the effect of vitamin D deficiency and local application on alveolar bone regeneration. MATERIAL AND METHODS Sixty rats were divided into three groups; two vitamin depletion groups and a control group. Identical single defects (2 mm diameter) were created in the maxilla and mandible treated with calcitriol soaked collagen in one deficiency group while in the other two groups not. Histomorphometric analysis and micro CTs were performed after 1 and 3 weeks. Serum levels of 25(OH)D3 and PTH were determined. RESULTS Bone formation rate significantly increased within the observation period in all groups. Bone regeneration was higher in the maxilla than in the mandible. However, bone regeneration was lower in the control group compared to vitamin depletion groups, with no significant effects by local administration of calcitriol (micro CT mandible p = 0.003, maxilla p < 0.001; histomorphometry maxilla p = 0.035, mandible p = 0.18). CONCLUSION Vitamin D deficiency not necessarily impairs bone regeneration in the rat jaw and a single local calcitriol application does not enhance healing.

Alcoholic and isocaloric diet, but not ovariectomy, influence the apoptosis of bone cells within the alveolar bone crest of rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Data collection on bone density of mandibular alveolar bone on a Hounsfield scale of the dental apex of the cranial root of the first inferior molar in dogs using computed tomography at FMVZ-UNESP

The head is the most important and specialized region in the body because it contains a range of specialized organs and, because it has interconnections between specialized organs, there is a great overlap of images. Thus, computed tomography (CT) helps in diagnosing diseases in this region, such as oral conditions, as they provide millimetric slices or cuts and demonstrate the relationship between the various anatomical structures involved, in volume and depth. Within dentistry, CT helps in the identification of pathological processes such as infection, tumors, visualization of embedded teeth and bone bed. This study aimed to assess the density of the mandibular alveolar bone at a determined point to later predict how periodontal disease is involved in bone resorption. For this, we performed a blind retrospective study (n = 124) of the CT scan files of dog skulls at FMVZ-UNESP in order to determine the density of the jaw bone using a Hounsfield scale, in the region of the dental apex of the cranial root of the first molar tooth in dogs. The results obtained were evaluated using mean and standard deviation (27.28 +/- 9.53 HU) in order to predict the normal density of the mandibular alveolar bone in the studied region. Thus, this data analysis allows a more concise evaluation of bone resorption of mandibular alveolar bone and, therefore, provides an adequate surgical planning in cases of osteosynthesis given mainly by the presence of installed periodontal disease.

A palaeobiologist's guide to 'virtual' micro-CT preparation

This paper provides a brief but comprehensive guide to creating, preparing and dissecting a 'virtual' fossil, using a worked example to demonstrate some standard data processing techniques. Computed tomography (CT) is a 3D imaging modality for producing 'virtual' models of an object on a computer. In the last decade, CT technology has greatly improved, allowing bigger and denser objects to be scanned increasingly rapidly. The technique has now reached a stage where systems can facilitate large-scale, non-destructive comparative studies of extinct fossils and their living relatives. Consequently the main limiting factor in CT-based analyses is no longer scanning, but the hurdles of data processing (see disclaimer). The latter comprises the techniques required to convert a 3D CT volume (stack of digital slices) into a virtual image of the fossil that can be prepared (separated) from the matrix and 'dissected' into its anatomical parts. This technique can be applied to specimens or part of specimens embedded in the rock matrix that until now have been otherwise impossible to visualise. This paper presents a suggested workflow explaining the steps required, using as example a fossil tooth of Sphenacanthus hybodoides (Egerton), a shark from the Late Carboniferous of England. The original NHMUK copyrighted CT slice stack can be downloaded for practice of the described techniques, which include segmentation, rendering, movie animation, stereo-anaglyphy, data storage and dissemination. Fragile, rare specimens and type materials in university and museum collections can therefore be virtually processed for a variety of purposes, including virtual loans, website illustrations, publications and digital collections. Micro-CT and other 3D imaging techniques are increasingly utilized to facilitate data sharing among scientists and on education and outreach projects. Hence there is the potential to usher in a new era of global scientific collaboration and public communication using specimens in museum collections.

Measurement of structural anisotropy in femoral trabecular bone using clinical-resolution CT images

Discrepancies in finite-element model predictions of bone strength may be attributed to the simplified modeling of bone as an isotropic structure due to the resolution limitations of clinical-level Computed Tomography (CT) data. The aim of this study is to calculate the preferential orientations of bone (the principal directions) and the extent to which bone is deposited more in one direction compared to another (degree of anisotropy). Using 100 femoral trabecular samples, the principal directions and degree of anisotropy were calculated with a Gradient Structure Tensor (GST) and a Sobel Structure Tensor (SST) using clinical-level CT. The results were compared against those calculated with the gold standard Mean-Intercept-Length (MIL) fabric tensor using micro-CT. There was no significant difference between the GST and SST in the calculation of the main principal direction (median error=28°), and the error was inversely correlated to the degree of transverse isotropy (r=−0.34, p<0.01). The degree of anisotropy measured using the structure tensors was weakly correlated with the MIL-based measurements (r=0.2, p<0.001). Combining the principal directions with the degree of anisotropy resulted in a significant increase in the correlation of the tensor distributions (r=0.79, p<0.001). Both structure tensors were robust against simulated noise, kernel sizes, and bone volume fraction. We recommend the use of the GST because of its computational efficiency and ease of implementation. This methodology has the promise to predict the structural anisotropy of bone in areas with a high degree of anisotropy, and may improve the in vivo characterization of bone.