Onttojen puiden lahopuukovakuoriaiset — kolmen pyydystyypin vertailu

Vanhat ja ontot puut ovat tärkeä elinympäristö monelle lahopuusta riippuvaiselle eliölajille. Onttoihin puihin on erikoistunut suuri määrä myös vaarantuneita ja harvinaisia hyönteislajeja, jotka elävät puun onkalon seinämillä tai onkalon pohjalle kerääntyvässä orgaanisessa aineksessa, ns. mulmissa. Tutkimuksen tavoitteena oli selvittää, mikä kolmesta pyydystyypistä (ikkuna-, vuoka- ja kuoppapyydys) soveltuu parhaiten onttojen puiden lahopuukovakuoriaisten pyyntiin. Lisäksi tavoitteena oli kartoittaa hyönteisnäytteiden ensimmäiseen laboratoriokäsittelyyn vaadittua aikaa. Tutkimuksessa oli mukana vanhoja rungostaan onttoutuneita lehmuksia, tammia ja vaahteroita pääkaupunkiseudun puisto- ja kartanoalueilta. Puiden onkaloiden sisään aseteltiin ikkuna-, vuoka- ja kuoppapyydyksiä, kaksi kutakin tyyppiä ja ne tyhjennettiin kolmen viikon välein touko-heinäkuussa 2006. Pyydyksiä oli siis yhteensä 90 per pyyntijakso. Kun näytteistä eroteltiin halutut hyönteislahkot (mukaanlukien kovakuoriaiset) niiden käsittelyyn käytetty aika kirjattiin ylös. Aineistosta tunnistettiin yhteensä 3825 kovakuoriaisyksilöä ja 212 lajia, joista lahopuusta riippuvaisia oli yhteensä 3398 yksilöä ja 121 lajia. Ikkunapyydyksissä esiintyi yhteensä 1639 yksilöä ja 140 lajia, vuokapyydyksissä 1506 yksilöä ja 134 lajia, kuoppapyydyksissä 680 yksilöä ja 111 lajia. Näytteiden käsittelyaikojen keskiarvot olivat 48,3 minuuttia ikkunapyydykselle, 65,5 minuuttia vuokapyydykselle ja 34,1 kuoppapyydykselle. Lajistokoostumuksen huomioiva ?-diversiteetti erosi huomattavasti pyydysten välillä, se oli 36,5 % ikkuna- ja vuokapyydysten välillä, 13,1 % ikkuna- ja kuoppapyydysten välillä ja 14,2 % vuoka- ja kuoppapyydysten välillä. Ikkuna- ja vuokapyydysten välillä ei havaittu tilastollisesti merkitsevää eroa saproksyylilajien (p<0,05), -yksilöiden (p<0,05) tai käsittelyaikojen (p<0,05) keskiarvoissa. Ikkuna- ja vuokapyydyksillä saatiin keskimäärin selvästi enemmän saproksyylilajeja ja –yksilöitä kuoppapyydykseen verrattuna. Kuoppapyydyksellä saatiin kokonaisyksilömäärään verrattuna suhteellisesti vähemmän saproksyylejä (59 %) kuin ikkuna- (69 %) ja vuokapyydyksillä (71 %). Ikkunapyydykset olivat tehokkain pyydystyyppi vertailtaessa pyydysten keräämää saproksyyliyksilömäärää suhteessa aineiston käsittelyn vaatimaan aikaan. Tehokkuus (yksilöä minuutissa) ikkunapyydykselle oli 0,74, vuokapyydykselle 0,43 ja kuoppapyydykselle 0,21. Ikkunapyydyksiä ei ole aikaisemmin käytetty puun onkalon sisällä hyönteisiä pyydettäessä vaan ne ovat aikaisemmissa tutkimuksissa roikkuneet onkalon ulkopuolella. Ikkunapyydykset kuitenkin toimivat erinomaisesti myös onkaloiden sisällä. Ikkuna- sekä vuokapyydys toimivatkin selkeästi paremmin lahopuukovakuoriaisten pyynnissä verrattuna kuoppapyydykseen, jonka poisjättäminen olisi kuitenkin tuottanut huomattavasti lajiköyhemmän aineiston. Mahdollisimman monimuotoisen onttojen puiden lahopuukovakuoriaislajiston keräämiseksi tulisi käyttää ikkuna- tai vuokapyydyksiä yhdessä kuoppapyydysten kanssa.

Enhancing fluorescence signals from aluminium thin films and foils using polyelectrolyte multilayers

In this paper we investigate the application of polyelectrolyte multilayer (PEM) coated metal slides in enhancing fluorescence signal. We observed around eight-fold enhancement in fluorescence for protein incubated on PEM coated on aluminium mirror surface with respect to that of functionalized bare glass slides. The fluorescence intensities were also compared with commercially available FAST (R) slides (Whatman) offering 3D immobilization of proteins and the results were found to be comparable. We also showed that PEM coated on low-cost and commonly available aluminium foils also results in comparable fluorescence enhancement as sputtered aluminium mirrors. Immunoassay was also performed, using model proteins, on aluminium mirror as well as on aluminium foil based devices to confirm the activity of proteins. This work demonstrated the potential of PEMs in the large-scale, roll-to-roll manufacturing of fluorescence enhancements substrates for developing disposable, low-cost devices for fluorescence based diagnostic methods.

Numerical modelling of lubricated foil rolling

A model of lubricated cold strip rolling (1, 2) is extended to the thin foil regime. The model considers the evolution of asperity geometry and lubricant pressure through the bite, treating the strip using a conventional slab model. The elastic deflections of the rolls are coupled into the problem using an elastic finite element model. Friction between the roll and the asperities on the strip is modelled using the Coulomb and Tresca friction factor approaches. The shear stress in the Coulomb friction model is limited to the shear yield stress of the strip. A novel modification to these standard friction laws is used to mimic slipping friction in the reduction regions and sticking friction in a central neutral zone. The model is able to reproduce the sticking and slipping zones predicted by Fleck et al. (3). The variation of rolling load, lubricant film thickness and asperity contact area with rolling speed is examined, for conditions typical of rolling aluminium foil from a thickness of 50 to 25 μm. T he contact area and hence friction rises as the speed drops, leading to a large increase in rolling load. This increase is considerably more marked using Coulomb friction as compared with the friction factor approach. Forward slip increases markedly as the speed falls and a significant sticking region develops.

M-L band x-rays (3-3.5 KeV) from palladium coated targets for isochoric radiative heating of thin foil samples

We describe experiments designed to produce a bright M-L band x-ray source in the 3-3.5 keV region. Palladium targets irradiated with a 10(15) W cm(-2) laser pulse have previously been shown to convert up to similar to 2% of the laser energy into M-L band x-rays with similar pulse duration to that of the incident laser. This x-ray emission is further characterized here, including pulse duration and source size measurements, and a higher conversion efficiency than previously achieved is demonstrated (similar to 4%) using more energetic and longer duration laser pulses (200 ps). The emission near the aluminium K-edge (1.465-1.550 keV) is also reported for similar conditions, along with the successful suppression of such lower band x-rays using a CH coating on the rear side of the target. The possibility of using the source to radiatively heat a thin aluminium foil sample to uniform warm dense matter conditions is discussed.

Estudo de sistemas de protecção térmica húmidos sujeitos a condições de incêndio

O presente trabalho tem como principal objectivo o estudo e a interpretação dos mecanismos de transferência de calor e massa no interior de um meio poroso húmido actuando como barreira térmica de protecção em condições de incêndio, visando, sobretudo, melhorar o desempenho destes sistemas. A barreira térmica estudada é constituída por camadas de fibra de vidro, cuja face exposta à chama é protegida por uma folha de alumínio perfurada. A realização deste estudo envolveu a concepção, realização e operação de uma montagem experimental, com a qual se obteve a evolução temporal da temperatura e da taxa de evaporação de água no interior de uma amostra da barreira térmica, submetida à acção directa de uma chama. A análise do processo de protecção foi complementada com resultados obtidos por simulação numérica do processo, designadamente a evolução das propriedades térmicas, que determinam os mecanismos de transferência de calor e massa no interior da barreira. Para esse efeito foi desenvolvido um modelo matemático de simulação do processo de protecção para as barreiras em estudo, que permitiu obter resultados que acompanham bem as evoluções verificadas nos ensaios experimentais. A barreira térmica estudada mostrou claramente possuir um bom desempenho no processo de protecção, face às barreiras térmicas secas. Com a realização deste estudo identificaram-se e quantificaram-se os mecanismos de transferência de calor e massa dominantes nas diversas fases do processo de protecção, o que permitiu extrair conclusões valiosas quanto às características dos meios porosos que contribuem para o seu bom desempenho como barreiras térmicas húmidas.

Seed longevity - moisture content relationships in hermetic and open storage

In seed storage research, moisture content can be maintained by providing a stable relative humidity (e.g. over saturated salt solutions) or by hermetic storage, but the two approaches provide different gaseous environments which might affect longevity. Seeds of timothy (Phleum pratense L.) and sesame (Sesamum indicum L.) were stored at 45 degrees C or 50 degrees C, respectively, with different moisture contents maintained by hermetic storage in laminated-aluminium-foil packets, or by desiccators above either saturated salt solutions or moistened silica gel. Seeds were withdrawn from storage at intervals from 1 to 28 d for up to 480 d and viability estimated. Within a species, the negative logarithmic relation between seed longevity and moisture content did not differ (P> 0.25, timothy; >0.05, sesame) between storage in desiccators over either moistened silica gel or saturated salt solutions, whereas the relation was much steeper (P< 0.005) in hermetic storage: longevity was similar at high moisture contents, but at low values much greater with hermetic storage. This effect of storage method on seed longevity's sensitivity to moisture content implies that oxygen is relatively more deleterious to seeds at lower than at greater moisture contents and confirms that hermetic storage is preferable for long-term seed storage at low moisture contents.

Survival and vigour of ultra-dry seeds after ten years of hermetic storage

Seeds of carrot, groundnut, lettuce, oilseed rape and onion were stored hermetically in laminated aluminium foil packets in four environments (dry or ultra-dry moisture contents combined factorially with temperatures of 20 degrees C or -20 degrees C), replicated at several sites. After ten years' hermetic storage, seed moisture content, equilibrium relative humidity, viability (assessed by ability to germinate normally in standard germination tests) and vigour were determined. After a decade, the change in seed moisture content of samples stored at -20 degrees C was small or nil. Except for groundnut and lettuce (where loss in viability was about 8 and 3%, respectively), no loss in viability was detected after 10 years' hermetic storage at -20 degrees C. In all cases, there was no difference in seed survival between moisture contents at this temperature (P > 0.25). Comparison of seed vigour (root length and rate of germination) also confirmed that drying to moisture contents in equilibrium with 10-12% r.h. had no detrimental effect to longevity when stored at -20 degrees C: the only significant (P < 0.05) differences detected were slightly greater root lengths for ultra-dry storage of four of the six seed lots. Seed moisture content had increased after a decade at 20 degrees C (generally to the level in equilibrium with ambient relative humidity). Hence, sub-zero temperature storage helped maintain the long-term integrity of the laminated aluminium foil packets, as well as that of the seeds within.

Prediction of cottonseed longevity

The objective of this work was to determine the viability equation constants for cottonseed and to detect the occurrence and depletion of hardseededness. Three seedlots of Brazilian cultivars IAC-19 and IAC-20 were tested, using 12 moisture content levels, ranging from 2.2 to 21.7% and three storage temperatures, 40, 50 and 65 degrees C. Seed moisture content level was reached from the initial value (around 8.8%) either by rehydration, in a closed container, or by drying in desiccators containing silica gel, both at 20 degrees C. Twelve seed subsamples for each moisture content/temperature treatment were sealed in laminated aluminium-foil packets and stored in incubators at those temperatures, until complete survival curves were obtained. Seed equilibrium relative humidity was recorded. Hardseededness was detected at moisture content levels below 6% and its releasing was achieved either naturally, during storage period, or artificially through seed coat removal. The viability equation quantified the response of seed longevity to storage environment well with K-E = 9.240, C-W = 5.190, C-H = 0.03965 and C-Q = 0.000426. The lower limit estimated for application of this equation at 65 degrees C was 3.6% moisture content.

Seawater carbonate chemistry, biomass and calcification of Porites spp. corals during experiments, 2011

I tested the hypothesis that the effects of high pCO2 and temperature on massive Porites spp. (Scleractinia) are modified by heterotrophic feeding (zooplanktivory). Small colonies of massive Porites spp. from the back reef of Moorea, French Polynesia, were incubated for 1 month under combinations of temperature (29.3°C vs. 25.6°C), pCO2 (41.6 vs. 81.5 Pa), and feeding regimes (none vs. ad libitum access to live Artemia spp.), with the response assessed using calcification and biomass. Area-normalized calcification was unaffected by pCO2, temperature, and the interaction between the two, although it increased 40% with feeding. Biomass increased 35% with feeding and tended to be higher at 25.6°C compared to 29.3°C, and as a result, biomass-normalized calcification statistically was unaffected by feeding, but was depressed 12-17% by high pCO2, with the effect accentuated at 25.6°C. These results show that massive Porites spp. has the capacity to resist the effects on calcification of 1 month exposure to 81.5 Pa pCO2 through heterotrophy and changes in biomass. Area-normalized calcification is sustained at high pCO2 by a greater biomass with a reduced biomass-normalized rate of calcification. This mechanism may play a role in determining the extent to which corals can resist the long-term effects of ocean acidification.

Seawater carbonate chemistry and calcification during experiments with a coral Madracis auretenra, 2010

Physiological data and models of coral calcification indicate that corals utilize a combination of seawater bicarbonate and (mainly) respiratory CO2 for calcification, not seawater carbonate. However, a number of investigators are attributing observed negative effects of experimental seawater acidification by CO2 or hydrochloric acid additions to a reduction in seawater carbonate ion concentration and thus aragonite saturation state. Thus, there is a discrepancy between the physiological and geochemical views of coral biomineralization. Furthermore, not all calcifying organisms respond negatively to decreased pH or saturation state. Together, these discrepancies suggest that other physiological mechanisms, such as a direct effect of reduced pH on calcium or bicarbonate ion transport and/or variable ability to regulate internal pH, are responsible for the variability in reported experimental effects of acidification on calcification. To distinguish the effects of pH, carbonate concentration and bicarbonate concentration on coral calcification, incubations were performed with the coral Madracis auretenra (= Madracis mirabilis sensu Wells, 1973) in modified seawater chemistries. Carbonate parameters were manipulated to isolate the effects of each parameter more effectively than in previous studies, with a total of six different chemistries. Among treatment differences were highly significant. The corals responded strongly to variation in bicarbonate concentration, but not consistently to carbonate concentration, aragonite saturation state or pH. Corals calcified at normal or elevated rates under low pH (7.6-7.8) when the seawater bicarbonate concentrations were above 1800 µm. Conversely, corals incubated at normal pH had low calcification rates if the bicarbonate concentration was lowered. These results demonstrate that coral responses to ocean acidification are more diverse than currently thought, and question the reliability of using carbonate concentration or aragonite saturation state as the sole predictor of the effects of ocean acidification on coral calcification.