Numerical solution of a PDE system with non-linear steady state conditions that translates the air stripping pollutants removal

This work deals with the numerical simulation of air stripping process for the pre-treatment of groundwater used in human consumption. The model established in steady state presents an exponential solution that is used, together with the Tau Method, to get a spectral approach of the solution of the system of partial differential equations associated to the model in transient state.

Spectral solution for the air stripping pollutants removal dynamic model with non linear steady state conditions

This work deals with the numerical simulation of air stripping process for the pre-treatment of groundwater used in human consumption. The model established in steady state presents an exponential solution that is used, together with the Tau Method, to get a spectral approach of the solution of the system of partial differential equations associated to the model in transient state.

Project, modelling and simulation of air stripping columns for the treatment of groundwater contaminated with volatile organic compounds

Volatile organic compounds are a common source of groundwater contamination that can be easily removed by air stripping in columns with random packing and using a counter-current flow between the phases. This work proposes a new methodology for the column design for any particular type of packing and contaminant avoiding the necessity of a pre-defined diameter used in the classical approach. It also renders unnecessary the employment of the graphical Eckert generalized correlation for pressure drop estimates. The hydraulic features are previously chosen as a project criterion and only afterwards the mass transfer phenomena are incorporated, in opposition to conventional approach. The design procedure was translated into a convenient algorithm using C++ as programming language. A column was built in order to test the models used either in the design or in the simulation of the column performance. The experiments were fulfilled using a solution of chloroform in distilled water. Another model was built to simulate the operational performance of the column, both in steady state and in transient conditions. It consists in a system of two partial non linear differential equations (distributed parameters). Nevertheless, when flows are steady, the system became linear, although there is not an evident solution in analytical terms. In steady state the resulting system of ODE can be solved, allowing for the calculation of the concentration profile in both phases inside the column. In transient state the system of PDE was numerically solved by finite differences, after a previous linearization.

Experimental assessment of pressure drop in air stripping columns

One important step in the design of air stripping operations for the removal of VOC is the choice of operating conditions, which are based in the phase ratio. This parameter sets on directly the stripping factor and the efficiency of the operation. Its value has an upper limit determined by the flooding regime, which is previewed using empirical correlations, namely the one developed by Eckert. This type of approach is not suitable for the development of algorithms. Using a pilot scale column and a convenient solution, the pressure drop was determined in different operating conditions and the experimental values were compared with the estimations. This particular research will be incorporated in a global model for simulating the dynamics of air stripping using a multi variable distributed parameter system.

Practical software improve design and performance of a randomly packed air stripping column for removing volatile organic compounds from water

STRIPPING is a software application developed for the automatic design of a randomly packing column where the transfer of volatile organic compounds (VOCs) from water to air can be performed and to simulate it’s behaviour in a steady-state. This software completely purges any need of experimental work for the selection of diameter of the column, and allows a choice, a priori, of the most convenient hydraulic regime for this type of operation. It also allows the operator to choose the model used for the calculation of some parameters, namely between the Eckert/Robbins model and the Billet model for estimating the pressure drop of the gaseous phase, and between the Billet and Onda/Djebbar’s models for the mass transfer. Illustrations of the graphical interface offered are presented.

A New Approach in the Design of Air Stripping Columns for the Treatment of Groundwater Contaminated With Volatile Organic Compounds

Volatile organic compounds are a common source of groundwater contamination that can be easily removed by air stripping in columns with random packing and using a counter-current flow between the phases. This work proposes a new methodology for column design for any type of packing and contaminant which avoids the necessity of an arbitrary chosen diameter. It also avoids the employment of the usual graphical Eckert correlations for pressure drop. The hydraulic features are previously chosen as a project criterion. The design procedure was translated into a convenient algorithm in C++ language. A column was built in order to test the design, the theoretical steady-state and dynamic behaviour. The experiments were conducted using a solution of chloroform in distilled water. The results allowed for a correction in the theoretical global mass transfer coefficient previously estimated by the Onda correlations, which depend on several parameters that are not easy to control in experiments. For best describe the column behaviour in stationary and dynamic conditions, an original mathematical model was developed. It consists in a system of two partial non linear differential equations (distributed parameters). Nevertheless, when flows are steady, the system became linear, although there is not an evident solution in analytical terms. In steady state the resulting ODE can be solved by analytical methods, and in dynamic state the discretization of the PDE by finite differences allows for the overcoming of this difficulty. To estimate the contaminant concentrations in both phases in the column, a numerical algorithm was used. The high number of resulting algebraic equations and the impossibility of generating a recursive procedure did not allow the construction of a generalized programme. But an iterative procedure developed in an electronic worksheet allowed for the simulation. The solution is stable only for similar discretizations values. If different values for time/space discretization parameters are used, the solution easily becomes unstable. The system dynamic behaviour was simulated for the common liquid phase perturbations: step, impulse, rectangular pulse and sinusoidal. The final results do not configure strange or non-predictable behaviours.

Indol-butyric acid levels on cashew cloning by air-layering process

Um estudo foi conduzido com a finalidade de determinar a possibilidade de clonagem do cajueiro (Anacardium occidentale) por alporquia e a influência do AIB (ácido indolbutírico) nesse processo. Adotou-se delineamento experimental inteiramente casualizado, com 4 tratamentos, 10 alporques por parcela, repetidos por 4 vezes, num total de 160 alporques. Os tratamentos constaram das concentrações de AIB: 0 (testemunha), 1.000, 3.000 e 5.000 mg.kg-1. Foram avaliadas as percentagens de sobrevivência, calejamento e enraizamento, bem como número e comprimento médio de raízes. A maior percentagem de sobrevivência (67,5%) foi observada para a testemunha e concentração de 1.000 mg.kg-1, enquanto a melhor percentagem de enraizamento (82%) foi relacionada com o nível de 1.000 mg.kg-1. Para o número e comprimento médio de raízes, os melhores resultados foram concernentes à dose de 5.000 mg.kg-1. Não houve influência do AIB na clonagem do cajueiro por alporquia.

Packed column air stripping.

Mode of access: Internet.

Air stripping of aqueous solutions.

Mode of access: Internet.

Simplifying the air permitting process

DHEC’s Bureau of Air Quality issues construction and operating permits. Here’s a brief overview of the air permitting public notice process, including timeframes for public notice comment periods and information on which permits are required by law to include public notices.

Simplifying the air permitting process : exemptions

The intent of this booklet is to provide a basic overview of the process to determine if equipment is eligible for a construction permit exemption. This guide will help you determine if a permit is needed or if your equipment is exempt.

Remoção de amônia do lixiviado por arraste de ar e caracterização por fracionamento com membrana.

A proposta deste trabalho é estudar a tecnologia para a remoção de amônia do lixiviado através do processo físico-químico de arraste com ar e a sua caracterização por processos de fracionamento com membranas de MF e UF. Foram analisados no processo de arraste de ar os parâmetros pH, vazão de ar e tempo de operação. Foi verificada a remoção de nitrogênio amoniacal de 93,5% em um tempo de operação de 6 horas, com ajuste de pH igual a 11 e vazão de ar 100 L/h. Após a remoção do nitrogênio amoniacal, os lixiviados foram submetidos a processo de fracionamento com membranas de microfiltração (MF) e ultrafiltração (UF), sendo investigadas a remoção de amônia, a condutividade, DQO, COD, cloreto e pH. Obtiveram-se resultados praticamente constantes à medida que o lixiviado permeou nas membranas de MF e UF. Ademais, empregaram-se testes de toxicidade e ensaios de tratabilidade biológica com amostras de lixiviado bruto, lixiviado tratado (baixa concentração de amônia) e lixiviados fracionados com membranas de MF e UF. Nos ensaios de tratabilidade biológica os resultados mostraram que não houve uma remoção significativa de matéria orgânica e nos testes de toxicidade com organismos Danio rerio, embora tenha ocorrido uma redução na toxicidade na sequência dos experimentos, foi constatado que o lixiviado bruto, lixiviado tratado com remoção de amônia e fracionados com membranas de MF e UF mantiveram elevada toxicidade.

Development of a climate assessment tool for hybrid air conditioner

Australian climate is highly suitable for using outdoor air for free building cooling. In order to evaluate the suitability of hybrid cooler for specific applications, a pre-design climate assessment tool is developed and presented in this paper. In addition to the consideration of the local climate, comfort zone proposed by ASHRAE handbook and specific design of building and operation of hybrid cooler, possible influence from environmental factors (e.g. air humidity and air velocity), as well as personal factors (e.g. activity level and clothing insulation) on occupant’s thermal comfort are also considered in this tool. It is demonstrated that with the input of climatic data for a particular location and the associated design data for a specific application, the developed climate assessment tool is able to not only sort outdoor air conditions into the different process regions but also project them onto the psychrometric chart. It can also be used to estimate the hours for an individual operational mode under various climate conditions and summarize them in a table “Results”.

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate