Influence of pH on hygral expansion, relaxation shrinkage and extensibility of wool fabric

The standard tests for relaxation shrinkage and hygral expansion of wool fabric take no account of pH. It is shown in this work that the pH of the solution in which wool fabric is relaxed as part of the procedure for measuring dimensional properties has a significant influence on the results. At around pH 4.8, which is close to the isoelectric point of wool, the hygral expansion reaches its greatest value and drops at both lower and higher pHs. A similar relationship between pH and extensibility of wool fabric was observed. Values of relaxation shrinkage were found to be dependant on pH. The reasons for the pH dependence of dimensional properties are discussed and these include changes in wool fiber swelling, yarn crimp and polymer relaxation phenomena with changes in pH.

Dependence of wool fabric dimensions on temperature and pH

Through a series of experimental analysis of temperature and pH value on the expansion of wool fiber and wool fabrics size change. In the pH2.1 solution, the wool fabric size declines with increasing temperature, changing the magnitude depends on the fabric and fabric shape rate. isoelectric point of pH4.8 in the wool, the fibers expand to reach the minimum, while the size of the fabric, along with the solution acidity increases.

Tensile behaviour of wool fabric as a function of fabric pH

Wool fabric extensibility under a 5 N/cm load was observed to be greatest at the wool isoelectric point of pH 4.8 and lower at both pH 2.1 and pH 7.2. The impact of pH on fabric extensibility is similar to the variation in fabric hygral expansion previously observed. Fabric stress-strain curves at different pHs show that for a given fabric extension level, the work required to stretch a fabric was less at pH 2.1 than at pH 4.8. These results confirm the fact that the strength of wool fabric is at a maximum when the pH of the fibres is close to the isoelectric point.

Photochromic coloration of wool fabric

A method has been developed for producing photochromic wool fabric by applying a layer of hybrid silica containing a photochromic dye onto wool fibres. A number of different hybrid silicas were prepared by the sol-gel technique involving co-hydrolysis and co-condensation of alkyltrialkoxysilanes together with 3-glycidoxypropyltrimethoxysilane. With the dye Photorome II, it was possible to obtain a photo chromic coating which showed fast optical response. The coating had only a slight effect on the fabric handle. The durability of the coating appeared to be acceptable, at least for fashion wear.

Photochromic wool fabric by sol-gel coating

This thesis investigates the possibility of producing photochromic wool fabrics using a silica sol-gel coating method. Silicas made from sol-gel methods are uniquely suited to host photochromic dyes for developing colour-changing wool. The achieved photochromic effects have opened a new product area for fashion effects on wool textiles.

Photochromic wool fabric by sol-gel coating and photochromism

The application of photochromism in textiles has potential to create new opportunities to develop fancy colour-changing effects in fashionable textiles, as well as smart garments capable of protecting wearers from the effects of UV irradiation and responding to environmental changes. This book presents a coating method for achieving quick and obvious photochromic effects on wool fabrics using conventional photochromic dyes and hybrid silicas. It covers details about fabricating different types of photochromic dye-silica coatings, measuring their optical performance, assessing some physical characterisations of the coatings, and measuring the effects of the coatings on fabric performance.

Use of low-level plasma for enhancing the shrink resistance of wool fabric treated with a silicone polymer

This study examines the effects of an atmospheric pressure plasma (APP) pre-treatment on the shrink resistance of wool fabric treated subsequently, by the pad/dry method, with an aqueous emulsion of the amino-functional polydimethylsiloxane, SM 8709. Optimal shrink resistance (with no impairment of fabric handle) was obtained after a low-level plasma treatment (1-3 s exposure time), using 5% of the polymer emulsion. Higher levels of silicone polymer could be used to achieve shrink resistance in the absence of a plasma pre-treatment, but the fabric handle would be adversely affected. X-ray photoelectron spectroscopy (XPS) studies showed that the bulk of the covalently bound surface lipid layer was removed after a plasma exposure time of 30 s. For treatment times of 3 s or less, however, the removal was incomplete, suggesting that optimum shrink resistance (after treatment with the silicone polymer) was associated with the modification of the surface layer rather than its complete destruction. Scanning electron micrographs (SEMs) revealed that the plasma pre-treatment did not lead to any physical modifications (such as smoothening of the scale edges), even for long exposure times, and had no significant impact on the extent or nature of the inter-fibre bonding of the polymer. Confocal microscopy showed uniform spread of polymer on single fibres. It is concluded that the main impact of the plasma pre-treatment was to enhance the distribution of polymer both on and between fibres and to improve adhesion of polymer to the fibre.

Antibacterial activity of capsaicin-coated wool fabric

Fabrics made from natural fibers, such as wool and cotton, are susceptible to attacks from micro-organisms, which may damage the fabrics and harm the human body. Antimicrobial finishing of natural textile products may involve harmful and non-environmentally friendly chemicals. In this study, a natural antibacterial agent, capsaicin, was coated on the surface of wool fabrics by a sol-gel process. The antibacterial properties of coated fabrics were evaluated against test bacteria Escherichia coli according to the American Association of Textile Chemists and Colorists (AATCC) method and standard American Society for Testing and Materials (ASTM) E2149-01. Compared with the control group (sol-gel coated fabric without capsaicin), the capsaicin-coated fabric inhibited bacterial growth markedly after 24 hours incubation at 37°C. The antibacterial efficiency after laundry washes was also investigated. Good durability to washing of capsaicin on fabric was achieved by the sol-gel coating technique.

Effects of pH on the stress-strain properties of wool fabric

In wool dyeing and finishing processes, fabric is often treated under conditions of different pHs and is subjected to a variety of physical and chemical environments. This work investigates fabric tensile properties at three different fabric pHs. Wool fabric extensibility under a 5 N/cm load was observed to be greatest at the wool isoelectric point of pH 4.8 and lower at both pH 2.1 and pH 7.2. The impact of pH on fabric extensibility was found to be similar to the variation in fabric hygral expansion previously observed. Fabric stress–strain curves at different pHs showed that for a given fabric extension level, the work required to stretch a fabric was less at pH 2.1 than at pH 4.8. These results suggest that the strength of wool fabric is at maximum when the pH of the fibres is close to the wool isoelectric point and that for consistency, the pH of fabric should be adjusted before standard strength tests are carried out.

Self-cleaning and color reduction in wool fabric by nano titanium dioxide

Wool is a textile material that is valued for its strength, warmth, water resistance, and texture. But this natural fiber of the protein keratin lacks the stain resistance of synthetic fabrics and is also generally susceptible to harsh processing conditions. In this study, raw and oxidized wool fabrics were treated with nano titanium dioxide (TiO2) powder in an ultrasonic bath. These particles were linked to the wool surface by butane tetra carboxylic acid and also sodium hypophosphite was used as a catalyst. The photo-catalytic activity of TiO2 nanoparticles deposited on the wool fabrics was followed by the degradation of Acid Blue 113 as a stain and also determined by the degradation rate of food stains such as coffee, tea, and fruit juice under the ultraviolet rays. The results showed that increasing the amount of nano TiO2 leads to improved degradation of stains on the treated fabric.

The effect of pH on wool fiber diameter and fabric dimensions

Wool fabrics are often treated under conditions of varying pH in dyeing and finishing processes. It is known that in air the dimensions of wool fabrics change with the amount of fiber swelling at different regain. In this work, it has been shown that a similar relationship between fiber swelling and fabric dimensions existed in water at different pH values. The diameters of Merino and Corriedale wool fibers in water at different pH values were measured with an OFDA 2000 fiber diameter analyzer, fitted with a specially constructed accessory liquid cell. The results showed that the mean diameters of swollen wool fibers in water varied with pH. Minimum swelling was obtained in the range pH 5-7. It was found that the dimensions of wool fabric in water were dependent on the pH. The changes in fiber diameter in water could be attributed to changes in ionic interactions between charged acid and basic groups in wool protein with variations in pH.