COMPARISON BETWEEN WOOD DRYING DEFECT SCORES: SPECIMEN TESTING X ANALYSIS OF KILN-DRIED BOARDS

It is important to develop drying technologies for Eucalyptus grandis lumber, which is one of the most planted species of this genus in Brazil and plays an important role as raw material for the wood industry. The general aim of this work was to assess the conventional kiln drying of juvenile wood of three clones of Eucalyptus grandis. The specific aims were to compare the behavior between: i) drying defects indicated by tests with wood specimens and conventional kiln-dried boards; and ii) physical properties and the drying quality. Five 11-year-old trees of each clone were felled, and only flatsawn boards of the first log were used. Basic density and total shrinkage were determined, and the drying test with wood specimens at 100 °C was carried out. Kiln drying of boards was performed, and initial and final moisture content, moisture gradient in thickness, drying stresses and drying defects were assessed. The defect scoring method was used to verify the behavior between the defects detected by specimen testing and the defects detected in kiln-dried boards. As main results, the drying schedule was too severe for the wood, resulting in a high level of boards with defects. The behavior between the defects in the drying test with specimens and the defects of kiln-dried boards was different, there was no correspondence, according to the defect scoring method.

Physical and mechanical properties of thermally modified wood from E. grandis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Decay resistance of thermally-modified Eucalyptus grandis wood at 140 degrees C, 160 degrees C, 180 degrees C, 200 degrees C and 220 degrees C

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Behavior of the brown-rot fungus Gloeophyllum trabeum on thermally-modified Eucalyptus grandis wood

In this study, we aimed evaluate the behavior of the brown-rot fungus Gloeophylum trabeum and white-rot fungus Pycnoporus sanguineus on thermally-modified Eucalyptus grandis wood. To this end, boards from five-year-eleven-month-old E. grandis trees, taken from the Duratex-SA company stock, were thermally-modified between 180 ºC and 220 ºC in the Laboratory of Wood Drying and Preservation at Universidade Estadual Paulista - UNESP, Botucatu, Sao Paulo state Brazil. Samples of each treatment were tested according to the ASTM D-2017 (2008) technical norm. The accelerated decay caused by the brown-rot fungus G. trabeum was compared with the decay caused by the white-rot fungus P. sanguineus, studied by Calonego et al. (2010). The results showed that (1) brown-rot fungus caused greater decay than white-rot fungus; and (2) the increase in temperature from 180 to 220 ºC caused reductions between 28.2% and 70.0% in the weight loss of E. grandis samples incubated with G. trabeum.

Puupolttoaineiden kuivausmenetelmien kartoitus

Työssä kartoitetaan käytössä olevia pilkkeen ja hakkeen keinokuivausmenetelmiä. Lisäksi arvioidaan menetelmien energiankulutusta ja kustannuksia, sekä käydään läpi kuivaajan suunnittelussa huomioon otettavia seikkoja. Työn ohessa on tehty Excel-laskentataulukko, jonka avulla voidaan arvioida lämpöyrittäjyyden kannattavuutta koko tuotantoketju huomioon ottaen. Lopussa tutkitaan kolmen erityyppisen pilkekuivurin käyttöä ja arvioidaan laskentataulukon avulla niiden vaikutuksia pilkeyrittäjän talouteen. Yleisin puupolttoaineiden keinokuivausmenetelmä on kylmäilmakuivaus. Sääriippuvuudesta ja usein epätasaisesta kuivauslaadusta johtuen se soveltuu vain pienimuotoiseen ja sivutoimiseen polttoainetuotantoon. Lisälämmityksellä parannetaan ilman kuivauskykyä, jolloin kuivaus on nopeampaa, loppukosteudet alhaisempia ja vuotuinen käyttöaika pitempi. Lämmitysratkaisun valinta riippuu kuivurin halutusta vuotuisesta käyttöajasta ja tuotantomääristä. Ammattimaiseen ja ympärivuotiseen pilketuotantoon soveltuu parhaiten korkeita, 70 - 90 °C lämpötiloja käyttävä kuivuri. Korkealämpötila-kuivurissa on tärkeää huolehtia riittävästä eristyksestä ja säädellystä ilmanvaihdosta. Suurilla polttopuun tuotantomäärillä kuljetuskustannukset korostuvat. Samalla kasvaa markkinoinnin tarve. Mainonnassa voidaan hyödyntää tehokasta kuivausmenetelmää.

Physical and chemical changes in juvenile and mature woods of Pinus elliottii var. elliottii by thermal modification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estimativa do tempo de vaporização das toras e sua implicação no desdobro e na secagem da madeira de Eucalyptus grandis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of thermal modification on the physical properties of juvenile and mature woods of Eucalyptus grandis

This study aimed to evaluate the effect of thermal treatment on the physical properties of juvenile and mature woods of Eucalyptus grandis. Boards were taken from 30-year-old E. grandis trees. The boards were thermally modified at 180 °C in the Laboratory of Wood Drying and Preservation at UNESP, Botucatu, Sao Paulo state, Brazil. The results showed that thermal modification caused: (1) decrease of 6.8% in the density at 0% equilibrium moisture content of mature wood; (2) significant decreases of 14.7% and 35.6% in the maximum volumetric swellings of juvenile and mature woods, respectively; (3) significant decreases of 13.7% and 21.3% in the equilibrium moisture content of juvenile and mature woods, respectively. The influence of thermal modification in juvenile wood was lower than in mature wood and caused greater uniformity in the physical variations between these types of wood in E. grandis.

Dimensional change behavior of caribbean pine using an environmental scanning electron microscope

Moisture transport and dimensional change during wood drying or wetting processes were analyzed based on pictures from an environmental scanning electron microscope (ESEM). This provides quantitative relationships between dimensional changes of total area, cell wall, and lumen, and moisture content for earlywood and latewood. Earlywood and latewood behave similarly but show some quantitative differences. The overall outcome for sections containing both kinds of wood seems to be dominated by the latewood behavior. The observed strain behavior of wood during drying is anisotropic in ways that are inconsistent with explanations solely related to microfibril orientation or earlywood/latewood interactions and more likely may be influenced by ray tracheids.

The dynamic of shrinkage/moisture content behavior determined during drying of microsamples for different kinds of wood

This article presents the results obtained from an experimental device designed for the accurate determination of wood/water relationship on microsamples. The moisture content of the sample is measured with a highly sensitive electronic microbalance and two dimensions of the sample are collected continuously without contact using high-speed laser scan micrometers. The whole device is placed in a climatic chamber. The microsamples investigated were prepared with a diamond wire saw. The unique ability of this device to work with small samples allowed normal, opposite, and reaction wood to be characterized separately. Experiments were carried out on three wood species (beech, spruce, and poplar). In the case of beech, a deviation from the linear relation between tangential shrinkage and moisture content between 40 and 20% is particularly noticeable for the first desorption. A localized collapse of ray cells could explain this result. Compared to normal wood, an important longitudinal shrinkage and a low tangential shrinkage were observed in compression wood of spruce. Both the tension wood and opposite wood of poplar exhibit a high longitudinal shrinkage, but no significant difference between the three types of wood is noticeable in the tangential direction.

The effect of microfibrillated cellulose addition on drying shrinkage and dimensional stability of wood-free paper

Microfibrillated cellulose (MFC) is known to enhance strength properties of paper. Improved strength usually means increased bonding which is strongly connected to dimensional instability of paper. Dimensional instability is due to changes in moisture content of paper; when paper is moistened it expands and when dried, it shrinks. Hygroexpansion is linked to end-use problems and excessive drying shrinkage consumes strength potential. Effective use of materials requires controlling of these phenomena. There isn’t yet data concerning dimensional stability of papers containing MFC which restricts wider use of MFC. Main objective of the work was to evaluate dimensional stability of wood-free paper containing different amounts of MFC. Sheets were dried with different methods to see how drying strains effected on drying shrinkage and hygroexpansion. Also tensile strength was measured to find out the effect of MFC. Results were compared to sheets containing kraft fines and in some test points cationic starch was used alongside with MFC. MFC increased the dimensional instability of freely dried sheets. As the amounts of MFC increased the effects on dimensional stability became more severe. However the fineness of MFC didn’t play any important role. Both hygroexpansion and drying shrinkage were decreased with cationic starch addition. Prevention of drying shrinkage over powered the effects of additives on hygroexpansion. Tensile strength improved up till 7 % addition amount which could be set as the upper limit of MFC addition when paper preparation and tensile strength are concerned.

Wood veneer : log selection, cutting, and drying /

Issued Jan. 1978.

Different aspects to consider during kiln drying of Vochysia guatemalensis Donn Sm. Wood (Cebo/Mayo)

Vochysia guatemalensis Donn Sm. wood is currently provided from plantations in several regions of Costa Rica. This wood presents several problems during the drying process such as high variability in the moisture content and high incidence of later defects. The objective of this study was to investigate the causes of this variation and defect developments. It was considered climate condition or precedence, grain pattern, drying schedule, boards position in relation to height and distance from to pith and heartwood presence.  The main factors affecting the moisture variability and drying defects were found to be: high initial moisture content variability in different parts of the tree, climate condition, and improper drying programs. Besides, there are recommendations to consider before starting the drying process. Thus a better wood quality in relation to moisture content variability and the presence of defects can be obtained after drying process.

Seeing the Wood through the Trees: The Current State of Higher Systematics in the Strepsirhini.

Strepsirhines comprise 10 living or recently extinct families, ≥50% of extant primate families. Their phylogenetic relationships have been intensively studied, but common topologies have only recently emerged; e.g. all recent reconstructions link the Lepilemuridae and Cheirogaleidae. The position of the indriids, however, remains uncertain, and molecular studies have placed them as the sister to every clade except Daubentonia, the preferred sister group of morphologists. The node subtending Afro-Asian lorisids has been similarly elusive. We probed these phylogenetic inconsistencies using a test data set including 20 strepsirhine taxa and 2 outgroups represented by 3,543 mtDNA base pairs, and 43 selected morphological characters, subjecting the data to maximum parsimony, maximum likelihood and Bayesian inference analyses, and reconstructing topology and node ages jointly from the molecular data using relaxed molecular clock analyses. Our permutations yielded compatible but not identical evolutionary histories, and currently popular techniques seem unable to deal adequately with morphological data. We investigated the influence of morphological characters on tree topologies, and examined the effect of taxon sampling in two experiments: (1) we removed the molecular data only for 5 endangered Malagasy taxa to simulate 'extinction leaving a fossil record'; (2) we removed both the sequence and morphological data for these taxa. Topologies were affected more by the inclusion of morphological data only, indicating that palaeontological studies that involve inserting a partial morphological data set into a combined data matrix of extant species should be interpreted with caution. The gap of approximately 10 million years between the daubentoniid divergence and those of the other Malagasy families deserves more study. The apparently contemporaneous divergence of African and non-daubentoniid Malagasy families 40-30 million years ago may be related to regional plume-induced uplift followed by a global period of cooling and drying. © 2013 S. Karger AG, Basel.