A participant’s response : recreating the circle with We Al-Li: a program for sharing and regeneration

Personal reflections on the We Al-Li Program

Applying a we al-li educaring framework to address histories of violence with Aboriginal women

An Aboriginal woman living in a remote area is 45 times more likely to experience domestic violence than their white peers. (Gordon et al, 2002) The nature of that violence is multi-layered, complex and incorporates a history of intergenerational loss, grief, trauma and the impact of colonisation, as discussed by Atkinson, C (2008). It involves women, children, families, communities. It is a story about people, many of whom find themselves in trouble with the legal system. Of the 25 male parents who killed their children in a domestic violence context five identified as Aboriginal (20%) (NSW Domestic Violence Death Review Team Annual Report, 2015, p.17). The percentage of women in Victorian prisons who have been victims of sexual, physical or emotional abuse has been reported to be 87% (Johnson, 2004). This figure is supported by the latest Ombudsman’s report on Victorian Prisons (2015).None of the 17 females who killed their children identified as Aboriginal or Torres Strait Islander (NSW Domestic Violence Death Review Team Annual Report 2015, p.18). The most common charge/offence for both Aboriginal men and women is an act intended to cause injury (see Figure 2).The stories of women in this program and anecdotal evidence from people working in the field reveals that most of this violence is lateral, ie within families and communities which is not an uncommon occurrence where there is a history of colonisation.

Processing and compressive strength of Al-Li-SiCp composites fabricated by a compound billet technique

Al-Li-SiCp composites were fabricated by a simple and cost effective stir casting technique. A compound billet technique has been developed to overcome the problems encountered during hot extrusion of these composites. After successful fabrication hardness measurement and room temperature compressive test were carried out on 8090 Al and its composites reinforced with 8, 12 and 18vol.% SiC particles in as extruded and peak aged conditions. The addition of SiC increases the hardness. 0.2% proof stress and compressive strength of Al-Li-8%SiC and Al-Li-12%SiC composites are higher than the unreinforced alloy. in case of the Al-Li-18%SiC composite, the 0.2% proof stress and compressive strength were higher than the unreinforced alloy but lower than those of Al-Li-8%SiC and Al-Li-12%SiC composites. This is attributed to clustering of particles and poor interfacial bonding.

Role of Li+ ions in corrosion behaviour of 8090 Al-Li alloy and aluminium in pH 12 aqueous solutions

The influence of Li+ ions on the corrosion behaviour of the Al-Li alloy 8090-T851 and of commercially pure aluminium in aqueous solutions at pH 12 was studied by weight loss and electrochemical polarisation methods. The inhibiting role of Li+ was concentration dependent, corrosion rate decreasing lineally with log[Li+] in the concentration range 10(-4)-10(-1) mol L(-1). A change from general to pitting corrosion was evident from scanning election microscopy studies. Polarisation studies revealed that Li+ primarily acts as an anodic inhibitor (passivator). Passive film formation and stability also become more feasible with increasing Li+ concentration. Fitting potential was dependent on the Cl- ion concentration in the solution. Both materials were affected similarly by the presence of Li+ ions, the corrosion rate of the alloy being slightly lower. This is attributed to the lithium in the alloy acting as a source of lithium for passive film formation. (C) 1995 The Institute of Materials.

Shear localization and recrystallization in dynamic deformation of 8090 Al-Li alloy

The microstructural evolution in localized shear deformation was investigated in an 8090 Al-Li alloy by split Hopkinson pressure bar (strain rate of approximately 10(3) s(-1)) at ambient temperature and 77 K. The alloy was tested in the peak-, over-, under-, and natural-aged conditions, that provide a wide range of microstructural parameters and mechanical properties. Two types of localized shear bands were distinguished by optical microscopy: the deformed shear band and the white-etching shear band. They form at different stages of deformation during localization. There are critical strains for the occurrence of deformed and white-etching localized shear deformation, at the imposed strain rate. Observations by transmission electron microscopy reveal that the white-etching bands contain fine equiaxed grains; it is proposed that they are the result of recrystallization occurring during localization. The deformed-type bands are observed after testing at 77 K in all heat treatment conditions, but they are not as well defined as those developed at ambient temperature. Cracking often occurs along the localized shear at ambient temperature. The decrement in temperature is favorable for the nucleation, growth and coalescence of the microcracks along the shear bands, inducing fracture.

Microstructures of explosively consolidated rapidly solidified aluminum and Al-Li alloy powders

The microstructures and the characteristics of water-atomized, nitrogen gas-atomized Al powders and ultrasonic argon gas-atomized Al-Li alloy powder were investigated by means of metallography, SEM, Auger electron spectroscopy and X-ray diffraction techniques. Rapidly solidified powders were explosively consolidated into different sized cylinders under various explosive parameters. The explosively consolidated compacts have been tested and analysed for density microhardness, retention of rapidly solidified microstructures, interparticle bonding, fractography and lattice distortion. It is shown that the explosive consolidation technique is an effective method for compacting rapidly solidified powders. The characteristics of surface layers play a very important role in determining the effectiveness of the joints sintered, and the Al-Li alloy explosive compacts present an abnormal softening appearance compared to the original powder.

熔盐电解法制备Al-Li合金的应用基础研究及其工艺初探

Al-Li合金是近年发展起来的新型航空材料，具有低密度、高强度的特点。目前世界上正就如何进一步提高其断裂韧性，使Al-Li合金尽早走出实验室，获得实际用进行广泛，深入的研究。熔盐电解法就是在这种情况下发展起来的。虽然此法现在尚处于研究的初级阶段，但已以其能够在较简单的设备上制备低Na高纯Al-Li合金的特点受到广泛的重视，是一种很有前途的发展方向。针对我国的技术、设备现状，在参考国外研究结果的基础上，采用熔盐电解法制备Al-Li母合金 → 应用合金的制备方法是可以尽快赶上世界发步伐的有效途径。因此，本文作为整个熔盐电解制备Al-Li合金系统研究的一部分，针对目前在此领域中很多应用基础问题，诸如：作为新的电解体系正在探索中的LiCl-KCl-LiF三元相图，Li在液体Al阴极中的扩散系数，利用熔盐电解法制备低Na高纯Al-Li合金的热力学基础及如何克服LiCl强烈的吸水性给电解工艺带来的种种不便等均未得到系统研究的现状，设计完成了一系列有关熔盐电化学和热力学实验，填补了本领域的一些研究空白，并为进一步系统研究工艺条件提供了重要的参考数据。1．用NH_4Cl氯化Li_2CO_3的研究 根据热力学从理论上论证了在200 ℃左右下述氯化反应：Li_2CO_3 + 2NN_4Cl = 2LiCl + 2NH_3~↑ + H_2O~↑ + CO_2~↑可以进行完全。利用DSC方法测定反应产物LiCl的纯度，并用离子色谱法分析反应产物中CO_3~=的含量，结果均证明：在Li_2CO_3:NH_4Cl = 1:4 (mol)时，Li_2CO_3可以定量转化为LiCl，剩余的NH_4Cl完全分解。根据热重分析结果推测NH_4Cl氯化Li_2CO_3的反应历程为：Li_2CO_3 + 2NH_4Cl = 2LiCl + 2NH_3~↑ + H_2O~↑ + CO_2~↑ NH_4Cl = HCl~↑ + NH_3~↑ 而并非是想像中的：NH_4Cl = HCl~↑ + NH_3~↑ 2HCl + Li_2CO_3 = 2LiCl + H2O~↑ + CO_2~↑利用X－射线衍射方法分析产物，结果亦说明氯化可以成功。将1:4（mol）= Li_2CO_3:NH_4Cl混合样品在差热分析反应炉中直接加热测定反应产物LiCl的溶点，并与纯LiCl样品熔点的测定结果相比较，二者完全一致。以上结果说明：不仅可用此氯化反应产物代替LiCl应用于熔盐电解制备Al-Li合金中，而且还可将其应用于LiCl体系的相图测定中。因Li_2CO_3，NH_4Cl均不吸水，极易处理，因此以上研究结果无论对于Al-Li合金的工艺研究还是其他有关LiCl体系的基础研究都是很有价值的。2．直接氯化法制备LiCl-KCl-LiF三元相图的研究。LiCl-KCl-LiF三元相图是研究此体系电解机制的重要基础。为将以上直接氯化法应用于差热分析中制作此三元体系相图，首先用直接氯化法测定了三个已知二元LiCl体系相图：LiCl－KCl；LiCl-LiF；LiCl-NaCl。与文献结果吻合很好。说明将此法应用于差热分析中制作LiCl体系相图结果是可靠的。在LiCl-KCl-LiF三元相图的测定中共做出七个垂直截面，在各截面上读出等温条件下的相界点投影到浓度三角形中，得到等温投影图。结果说明LiCl-KCl-LiF是固态完全不互溶的三元共晶体系，共有三个液－固两相区；三个液－固－固三相区；一个液－固－固－固四相区，（三元共晶平面）和一个固－固－固三相区。四相点温度为348 ℃，其组成在三相平衡线的交点处，在实验上测出近似等于：41.4KCl + 57.3LiCl + 1.3LiF (mol)。3．氯化物体系中Li~+, Na~+析出电位的比较及其去极化作用的研究。在正常电化序中，Li~+应先于Na~+析出。但在以Al作阴极电解LiCl体系时，则由于Li~+在Al上有较强的去极化作用而提前析出。这是熔盐电解法可以制备低Na，高纯Al-Li合金的基础。本文在理论上对此问题进行了较深入的研究。具体内容包括（1）。测定Li~+, Na~+在二元氯化物体系中的析出电位。通过在Al阴极，Mo阴极上二离子析出电位的比较，确认了Li~+在Al阴极上产生很强的去极化作用是能利用电解法制备低Na高纯Al-Li合金的根本原因。并为在工艺研究中选择合适的电流密度提供了参考依据。（2）．根据热力学理论推导出合金化反应产生的自由焓变化与去极化作用的关系：ΔG_x + ΔG_m = -nFΔE。揭示了产生去极化作用的原因。并根据ΔG_x（偏摩尔过剩自由焓）与合金结构的关系提出可以利用二元合金相图推测极化类型及极化大小。并根据动力学原理对温度对极化的影响提出了自己的看法。（3）．求出合金化反应的热效应，认为在一定条件下亦可利用此值作为判断去极化作用大小的标准。（4）．测定Li~+, Na~+在Al-Cu, -Al-RE合金上的析出电位。结果表明Cu，RE的存在均可加强Li~+在阴极上的去极化作用，进一步加大了Li~+, Na~+析出电位之间的差别，有利于制备更纯的Al-Li 使金。为直接生产Al-Cu-Li, Al-RE-Li三元母合金奠定了基础。（5）测定Li~+在不同组成配比的LiCl-KCl熔体中，在Al阴极上的析出电位，并求出LiCl的离子平均活度系数γ＝0.71 (T = 740 ℃), 熔体对理想状态产生负偏离。4．利用阳极计时电位法测定T＝720 ℃时Li在液体Al中的扩散系数D_(Li/Al) = 4.94 * 10~(-5)cm~2·s~(-1)，与利用Stocks-Einstan公式计算出的理论值D_(Li/Al) = 4.85 * 10~(-5)cm~2·s~(-1)吻合较好。5．在上述理论研究的基础之上进行了工艺初探，所得初步结论有：（1）．加入LiF可以提高电效。（2）．采用电流密度为1 A/cm~2时，不加搅拌亦可制备出成份均匀，含Li量为10％（w.f）的Al-Li合金。（3）．根据实验结果提出 Li在熔体中的熔解可能是影响电流效果的主要原因。

稀土对Al-Li合金凝固组织的影响及作用机理研究

本论文借助光学显微镜、电镜、X-射线、差热等金相分析技术研究了稀土（La、Ce、Pr、Nd、MM、Ymm）在单向、自由凝固条件下对Al-Li合金凝固组织的影响，进而分析了稀土的作用机理。实验结果表明，稀土对自由凝固的晶粒及二次枝晶、单向凝固的一次枝晶均有细化作用，这种作用同稀土元素、稀土含量及凝固条件有关。分析认为，在合金凝固过程中由于稀土的富集产生“成分过冷”等作用是影响凝固组织的因素。

Al-Li-Ymm合金的组织和腐蚀性能

对Al-3.1Li及Al-2.7Li-0.21Ymm二种合金的铸态及在540℃条件下固溶处理４小时后的组织进行了观察和分析，测定了二种合金在3.5%NaCl水溶液中的电化学腐蚀性能。结果表明：二种合金的宏观组织未见明显示差别，含Ymm的合金微观组织较细化，添加少量Ymm对合金的腐蚀性能有较好的影响，固熔处理后的合金耐腐性能提高

Impact of grain microstructure on the heterogeneity of precipitation strengthening in an Al-Li-Cu alloy

The effect of grain microstructure on the age-hardening behavior is investigated on recrystallized and un-recrystallized Al-Cu-Li alloys by combining electron-backscatter-diffraction and micro-hardness mapping. The spatial heterogeneity of micro-hardness is found to be strongly dependent on the grain microstructure. Controlled experiments are carried out to change the pre-strain before artificial ageing. These experiments lead to an evaluation of the range of local strain induced by pre-stretching as a function of the grain microstructure and results in heterogeneous formation of the hardening T1 precipitates.

SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al-Li alloys used in aircraft fabrication

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)