Association of SNPs on CAPN1 and CAST genes with tenderness in Nellore cattle

We examined whether single-nucleotide polymorphisms (SNPs) in the calpain (CAPN) and calpastatin (CAST) genes, described from Bos primigenius taurus, are polymorphic in Nellore cattle. We also looked for a possible association of linkage disequilibrium of this polymorphism with tenderness of the longissimus dorsi muscle after 7, 14 and 21 days of postmortem aging in 638 purebred Nellore bulls. Meat tenderness was measured as Warner-Bratzler shear force. Additive and dominance effects were tested for SNPs of the three genotypic classes; the substitution effect was tested for SNPs with missing genotypic classes. Genotypic and gene frequencies were also calculated for the different SNPs. An increase in tenderness was observed from 7 to 21 days; the average values for shear force at 7, 14 and 21 days of aging were 5.92 +/- 0.06, 4.92 +/- 0.05, and 4.38 +/- 0.04 kg, respectively. All markers showed polymorphism, but there was no CC genotype for CAPN316, and few animals showed the AA genotype for CAPN530. The alleles CAPN4751, UOGCAST1, and WSUCAST were found to have additive and dominance effects for shear force at 7, 14 and 21 days, while CAPN316 showed a substitution effect for shear force at 7 and 21 days. An additive-by-additive epistatic interaction was observed between CAPN4751 and markers on the CAST gene. In conclusion, these markers should be considered for use in breeding programs.

STANDARDIZATION OF PROCESS PARAMETERS FOR READY TO EAT FISH PRODUCTS IN INDIGENOUS POLYMER COATED TIN FREE STEEL CANS

In the present work, Indigenous polymer coated Tin Free Steel cans were analyzed fortheir suitability for thermal processing and storage of fish and fish products following standard methods. The raw materials used for the development of ready to eat thermally processed fish products were found to be of fresh condition. The values for various biochemical and microbiological parameters of the raw materials were well within the limits. Based on the analysis of commercial sterility, instrumental colour, texture, WB-shear force and sensory parameters, squid masala processed to F0 value of 8 min with a total process time of 38.5 min and cook value of 92 min was chosen as the optimum for squid masala in tin free steel cans while shrimp curry processed to F0 7 min with total process time of 44.0 min and cook value of 91.1 min was found to be ideal and was selected for storage study. Squid masala and shrimp curry thermally processed in indigenous polymer coated TFS cans were found to be acceptable even after one year of storage at room temperaturebased on the analysis of various sensory and biochemical parameters. Analysis of the Commission Internationale d’ Eclirage L*, a* and b* color values showed that the duration of exposure to heat treatment influenced the color parameters: the lightness (L*) and yellowness (b*)decreased, and the redness (a*) significantly increased with the increase in processing time or reduction in processing temperature.Instrumental analysis of texture showed that hardness-1 & 2 decreased with reduction in retort temperature while cohesiveness value did not show any appreciable change with decrease in temperature of processing. Other texture profile parameters like gumminess, springiness and chewiness decreased significantly with increase of processing time. W-B shear force values of mackerel meat processed at 130 °C were significantly higher than those processed at 121.1 and 115 °C. HTST processing of mackerel in brine helped in reducing the process time and improving the quality.The study also indicated that indigenous polymer coated TFS cans with easy openends can be a viable alternative to the conventional tin and aluminium cans. The industry can utilize these cans for processing ready to eat fish and shell fish products for both domestic and export markets. This will help in reviving the canning industry in India.

Meat yield and quality of Tanzania Shorthorn Zebu cattle finished on molasses/maize grain with agro-processing by-products in 90 days feedlot period

This study was conducted to evaluate the effects of feeding molasses or maize grain with agro-processing by-products on yield and quality of meat from Tanzania shorthorn zebu (TSZ) cattle. Forty five steers aged 2.5 to 3.0 years with 200 +/- 5.4 kg body weight were allocated into five dietary treatments namely hominy feed with molasses (HFMO), rice polishing with molasses (RPMO), hominy feed with maize meal (HFMM), rice polishing with maize meal (RPMM) and maize meal with molasses (MMMO). Ad libitum amount of each dietary treatment and hay were offered to nine steers for 90 days. Cooking loss (CL) and Warner Bratzler shear force (WBSF) values were determined on M. longissimus thoracis et lumborum aged for 3, 6, 9 and 12 days. Steers fed on HFMO diet had higher (P < 0.05) nutrient intake (86.39 MJ/d energy; 867 g/d CP), weight gain (919 g/d) and half carcass weight (75.8 kg) than those fed other diets. Meat of steers from all diets was tender with average WBSF values of 47.9 N cm^(−2). The CL (22.0 +/- 0.61%) and WBSF (53.4 +/- 0.70 N cm^(−2)) were highest in meat aged for 3 days followed by 6, 9 and 12 days. WBSF values for meat aged for 9 and 12 days from steers fed HFMO and RPMM diets were similar and lower than those on other dietary treatments x aging periods. Overall, molasses and hominy feed can be used to replace maize meal in feedlot finishing diets to spare its use in animal feeds.

Medidas objetivas das carcaças e composição química do lombo de cordeiros alimentados e terminados com três níveis de proteína bruta em creep feeding

Objetivou-se avaliar o efeito de três níveis de proteína (15, 20 e 25% PB) na ração sobre as medidas objetivas das carcaças e do músculo Longissimus dorsi, os pesos e rendimentos dos cortes, além da composição química e maciez da carne de cordeiros Suffolk alimentados e terminados em creep feeding. Foram utilizados 15 cordeiros inteiros, originados de partos simples, abatidos ao atingirem peso vivo final de 28 kg. As carcaças foram mantidas em câmara de refrigeração a 5ºC, durante 24 horas, para registro das medidas objetivas, realizado após separação dos cortes comerciais, na meia-carcaça esquerda. A área do músculo Longissimus dorsi foi mensurada para determinação da área de olho de lombo (AOL cm²). No lombo esquerdo congelado, realizou-se a análise de composição química e, no direito, também congelado, o teste de maciez peloWarner Bratzler Shear Force. Os níveis de proteína bruta não influenciaram as medidas objetivas de carcaça nem as do músculo Longissimus dorsi. Houve efeito significativo para peso e rendimento da paleta, com superioridade para o tratamento contendo 25% de proteína bruta. Nas análises químicas do músculo Longissimus dorsi, observou-se efeito significativo para extrato etéreo, cinzas e maciez. No sistema de alimentação e terminação de cordeiros Suffolk em creep feeding, a ração formulada com farelo de soja como fonte protéica deve ser balanceada com 25% de proteína bruta por diminuir o teor de gordura e melhorar a maciez da carne e o peso e rendimento da paleta, sem afetar as medidas objetivas da carcaça, os demais pesos e os rendimentos dos cortes.

Meat quality of swine supplemented with ractopamine under commercial conditions in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos do sexo, do grupo racial e da idade ao abate nas características de carcaça e maciez da carne de caprinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Espessura da lâmina de cisalhamento na avaliação instrumental da textura da carne

A padronização da textura é um dos principais problemas relacionados à qualidade da carne bovina. Por isso, a avaliação objetiva da maciez, por métodos mecânicos, vem sendo estudada há muitos anos. Para que a avaliação instrumental da textura seja uma ferramenta efetiva nos estudos envolvendo a maciez da carne, é necessário minimizar as causas de variação envolvidas na análise. Atualmente, a força de cisalhamento Warner-Bratzler é o método mais amplamente empregado para essa finalidade. O protocolo padrão dessa técnica analítica preconiza a utilização de uma lâmina de cisalhamento de 1,016mm de espessura. Neste trabalho, foram comparados dados de textura de carne bovina obtidos com a lâmina de cisalhamento padrão Warner-Bratzler, de 1,016mm de espessura, e uma lâmina mais grossa, de 3,05mm de espessura. Após o abate, amostras de músculo Longissimus dorsi, semelhantes em relação aos teores de umidade, lipídeos e proteínas, foram submetidas a duas diferentes temperaturas de resfriamento, atingindo diferentes velocidades de queda de temperatura e, consequentemente, diferentes graus de contração do tecido muscular, o que foi confirmado pela determinação do comprimento dos sarcômeros. Os resultados demonstraram uma maior sensibilidade da lâmina padrão Warner-Bratzler na detecção de variações da textura da carne, em função da velocidade de resfriamento.

Desempenho em pastagens e características de carcaça da 16a progênie dos rebanhos Nelore, Guzerá e Caracu de Sertãozinho (sp)

Forty one young bulls of herds selected for 378 day's weight (W378), born in 1996, were finished on pastures of Panicum Maximum (Jacq.), Panicum Maximum (Jaq) cv. Tanzania 1 and Brachiaria brizantha (Hoschst) Stapf cv. Marandu at the Sertaozinho Experimental Station, São Paulo State, Brazil. The samples, representing the W378 mean for each herd, were composed by 11 Nellore Selection (NeS) and by 10 of each one of the groups Nelore Control (NeC), Guzera Selection (GuS) and Caracu (Ca). The slaughter was carried out when the animals were 824 days older, with a body condition score averaging 7.6, in a 1-9 scale. The minimum and maximum adjusted means for the main traits, including all groups, were: average weight daily gain, 406 (NeC) and 501 g (NeS); slaughter weight (SW), 446.8 (NeC) and 544.3 kg (NeS); carcass weight (CW), 249.8 (NeC) and 309.7 kg (NeS); dressing percentage (DP), 54.0 (GuS) and 56.3% (NeC and NeS). In the 9(th) - 11(th) rib section: muscle, 59.6 (NeC) and 65.2% (Ca); fat, 15.6 (Ca) and 21.4% (NeC); bone, 18.9 (NeC) and 20.2% (GuS); fat thickness (FT), 2.0 (Ca) and 4.2 mm (NeC); loin eye area, 65.6 (NeC) and 71.1 cm(2) (NeS and Ca); Warner-Bratzler shear force (SF), 4.5 (Ca) and 6.6 kg (GuS) and total cooking losses (TCL), 22.5 (NeC) and 24.9% (GuS). The selection for weight promoted higher SW and CW in the NeS group, without changing the DP, the physical composition of the rib, SF and TCL in the meat. However, there was lower FT compared to NeC. The GuS animals had intermediates SW and CW, compared to NeS and Ca and lower DP. The Ca animals presented higher muscle percentage, in the rib section, and also higher meat tenderness compared to the meat of the Zebu animals.

Expression of genes related to quality of Longissimus dorsi muscle meat in Nellore (Bos indicus) and Canchim (5/8 Bos taurus×3/8 Bos indicus) cattle

This study was performed to compare CAPN1, CAPN2, CAST, TG, DGAT1 and LEP gene expressions and correlate them with meat quality traits in two genetic groups (Nellore and Canchim) in order to assess their expression profile and use their expression profile as genetic markers. We analyzed 30 young bulls (1. year old), 15 of each genetic group. Samples of the Longissimus dorsi muscle were collected for analysis of: total lipids (TL) and meat tenderness measured as Warner-Bratzler shear force (SF) and myofibrillar fragmentation (MFI) at day of slaughter and 7. days of aging. Gene expression profiles were obtained via RT-qPCR. TL and MFI showed differences between breeds, higher MFI in Canchim and higher TL in Nellore. Calpains showed no differential expression between groups, as did DGAT1, TG, and LEP. CAST was expressed more in the Nellore cattle. The only significant within-breed correlation (0.79) between gene expression and meat traits was found for DGAT1 and MFI in Canchim breed. Although the number of animals used in this study was small, the results indicate that the increased expression of CAST in Nellore may reflect tougher meat, but the lack of correlations with the meat traits indicates it is not a promising genetic marker. © 2013 Elsevier Ltd.

Análise de algumas proteinas miofibrilares envolvidas na maciez da carne em bovinos de corte

Pós-graduação em Zootecnia - FMVZ

Estudo genético quantitativo da qualidade da carcaça e da carne e suas associações com as características de avaliação visual na raça Nelore

Pós-graduação em Genética e Melhoramento Animal - FCAV

Fast determination of beef quality parameters with time-domain nuclear magnetic resonance spectroscopy and chemometrics

The noteworthy of this study is to predict seven quality parameters for beef samples using time-domain nuclear magnetic resonance (TD-NMR) relaxometry data and multivariate models. Samples from 61 Bonsmara heifers were separated into five groups based on genetic (breeding composition) and feed system (grain and grass feed). Seven sample parameters were analyzed by reference methods; among them, three sensorial parameters, flavor, juiciness and tenderness and four physicochemical parameters, cooking loss, fat and moisture content and instrumental tenderness using Warner Bratzler shear force (WBSF). The raw beef samples of the same animals were analyzed by TD-NMR relaxometry using Carr-Purcell-Meiboom-Gill (CPMG) and Continuous Wave-Free Precession (CWFP) sequences. Regression models computed by partial least squares (PLS) chemometric technique using CPMG and CWFP data and the results of the classical analysis were constructed. The results allowed for the prediction of aforementioned seven properties. The predictive ability of the method was evaluated using the root mean square error (RMSE) for the calibration (RMSEC) and validation (RMSEP) data sets. The reference and predicted values showed no significant differences at a 95% confidence level.

Caracterização molecular de bovinos de origem Bos indicus e seus cruzados para maciez de carne

O objetivo desse trabalho foi conhecer a variabilidade genética da calpaína e seu potencial como marcador molecular para programas de melhoramento genético, visando auxiliar na seleção de genótipos superiores para maciez de carne zebuína. Para tanto foram analisados 55 animais da raça Nelore, proveniente de outros projetos de pesquisa conduzidos pela equipe técnica do Laboratório de Genética do Instituto de Zootecnia de Nova Odessa. Os animais foram abatidos ao atingirem o acabamento de 4 mm de espessura de gordura e a amostra de carne foi coletada entre a 12ª e 13ª costelas no músculo Longissimus dorsi. A maciez de carne foi avaliada empregando-se a técnica de Warner Bratzler Shear Force em 0 e 14 dias de maturação. O DNA foi extraído a partir das amostras de carne, em seguida foi quantificado e diluído para ser amplificado por PCR. Três polimorfismos foram investigados pelas técnicas de PCR-RFLP e PCR- SSCP, localizados no exon 9, exon 14 e intron 17 do gene calpaína, sendo denominados CPN316, CAPN530, CAPN4751, respectivamente. Os resultados da análise de associação entre os dados de força de cisalhamento (FC) e marcadores moleculares revelaram efeito significativo apenas para o marcador CAPN4751. O alelo C, considerado favorável para maciez de carne, apresentou relação significativa (P>0,05) com valores menores de FC, sugerindo o seu emprego na seleção de genótipos superiores para maciez de carne de bovinos da raça Nelore

The Effect on Meat Quality of Integrating Pasturing Systems into Cattle Finishing Programs

The effect on meat quality of integrating pasturing systems into cattle finishing programs was observed over a two-year period. Year one consisted of 84 fall born calves and 28 spring born calves and year two consisted of 116 fall born calves. The effect of using Rumensinâ for cattle on bromegrass pasture was incorporated into year one. In year two cattle on pasture received bromegrass pasture, and one treatment group received switchgrass during the warm season. In both years there was a control group of calves that went directly to the feedlot with the remaining calves going to pasture for varying periods of time before being finished in drylot. At the conclusion of the feeding trial, cattle were processed into beef, and a ribeye steak was removed from each carcass for sensory evaluation. In year one cattle that were on pasture the longest had the lowest (P<0.05) average quality grades. In year two this trend was reversed, and cattle placed directly into drylot had the lowest (P<0.05) average quality grades. In both years cattle carcasses in all treatments averaged yield grade 2. Warner Bratzler shear force values were not affected by treatments. Sensory panel evaluations indicated tenderness was unaffected by treatments, and in year two flavor and flavor intensity were unaffected by treatments. In year one flavor intensity was lowest (P<0.05) for steaks derived from cattle that were on pasture the longest and received Rumensinâ. Inclusion of Rumensinâ for cattle on pasture did not influence yield and quality grades or affect tenderness, juiciness, and flavor. Results of this study indicate that steer calves placed on cool and warm season pastures prior to being finished in drylot, can produce carcasses with acceptable yield and quality grades and that the meat eating qualities will be largely unaffected by the inclusion of pasture.

Impacto do pH final na maciez do músculo Longissimus lumborum de animais zebuínos: mudanças estruturais de proteínas da carne crua e cozida durante a maturação

O objetivo do presente trabalho foi determinar a força de cisalhamento Warner-Bratzler do músculo Longissimus lumborum de animais zebuínos machos inteiros (Bos indicus) durante o período de maturação, nas faixas de pH final (pHf 48 horas post mortem) normal (pH entre 5,5 e 5,8) e anormal (pH entre 5,81 e 6,19) e temperaturas internas de cozimento. Concomitante com a avaliação de força de cisalhamento, foram avaliadas também a degradação da desmina e troponina T, o comprimento do sarcômero, o teor de colágeno total e solúvel, as temperaturas máximas de desnaturação das proteínas e a morfologia geral de agregação das fibras do músculo no cozimento. A degradação da desmina e troponina T foi maior no pHf normal, aparecendo produtos de degradação a partir do dia 7 nessa faixa de pHf. Não houve diferenças nos valores de comprimento do sarcômero, descartando-se assim, a contribuição desse parâmetro sobre a temperatura máxima de desnaturação (Tmáx) das proteínas, determinada utilizando calorímetro exploratório diferencial (DSC). Similarmente, não foram encontradas diferenças para os teores de colágeno total e solúvel, e os valores de colágeno total foram baixos, sugerindo que sua contribuição na segunda transição térmica e nos valores de força de cisalhamento foi mínima. As Tmáx1 e Tmáx2, correspondentes à desnaturação da meromiosina leve e pesada, respectivamente, foram menores no pHf normal, mas o efeito foi maior para a Tmáx2. A Tmáx3 da actina e titina aumentou até 14 dias post mortem na faixa de pHf normal, e posteriormente diminuiu significativamente após 21 dias, sugerindo possível degradação dessas proteínas nesse período de dias. Não foram encontradas diferenças nos valores de Tmáx no pHf anormal, em todos os dias post mortem, o que sugere a contribuição de um possível mecanismo de proteção que estabiliza as miofibrilas no aquecimento. Houve maior agregação das fibras do músculo no pHf normal nas temperaturas internas de cozimento de 65 e 80°C, provavelmente devido à maior desnaturação térmica das miofibrilas. Os valores de força de cisalhamento foram maiores com o aumento da temperatura interna de cozimento, devido ao aumento da desnaturação térmica das miofibrilas do músculo. Independente da temperatura interna de cozimento, os valores de força de cisalhamento foram altos em quase todos os dias post mortem para ambas as faixas de pHf, o que sugere a necessidade de utilizar métodos físicos ou químicos para aumentar a maciez do músculo Longissimus lumborum de animais zebuínos.