Preparation, properties and applications of wheat gluten edible films

Selostus: Syötävien gluteenikalvojen valmistus, ominaisuudt ja eräät käyttösovellukset

Development and characterization of edible films based on gluten from semi-hard and soft Brazilian wheat flours (development of films based on gluten from wheat flours)

Edible films based on gluten from four types of Brazilian wheat gluten (2 "semi-hard" and 2 "soft") were prepared and mechanical and barrier properties were compared with those of wheat gluten films with vital gluten. Water vapor, oxygen permeability, tensile strength and percent elongation at break, solubility in water and surface morphology were measured. The films from "semi-hard" wheat flours showed similar water vapor permeability and solubility in water to films from vital gluten and better tensile strength than the films from "soft" and vital gluten. The films from vital gluten had higher elongation at break and oxygen permeability and also lower solubility in water than the films from the Brazilian wheat "soft" flours. In spite of the vital gluten showed greater mechanical resistance, desirable for the bakery products, for the purpose of developing gluten films Brazilian "semi-hard" wheat flours can be used instead of vital gluten, since they showed similar barrier and mechanical properties.

Rheological and thermal characteristics of wheat gluten biopolymers plasticized with glycerol

The objective this work was to obtain bioplastics from mixtures of wheat gluten and glycerol by two different processes and evaluate their respective rheological properties. The mixtures and their respective bioplastics were obtained through direct batch mixing under approximately adiabatic and isothermal conditions. The bioplastics showed high values for the storage (G') and loss (G") moduli, suggesting a stronger protein network formed in both processes. The temperature onset and the percentage of weight loss to be estimated were found to be near in both bioplastics. The bioplastics have demonstrated to be materials of interesting potential of use as biodegradable barrier materials.

A comparative study among methods used for wheat flour analysis and for measurements of gluten properties using the Wheat Gluten Quality Analyser (WGQA)

This study aimed at comparing both the results of wheat flour quality assessed by the new equipment Wheat Gluten Quality Analyser (WGQA) and those obtained by the extensigraph and farinograph. Fifty-nine wheat samples were evaluated for protein and gluten contents; the rheological properties of gluten and wheat flour were assessed using the WGQA and the extensigraph/farinograph methods, respectively, in addition to the baking test. Principal component analysis (PCA) and linear regression were used to evaluate the results. The parameters of energy and maximum resistance to extension determined by the extensigraph and WGQA showed an acceptable level for the linear correlation within the range from 0.6071 to 0.6511. The PCA results obtained using WGQA and the other rheological apparatus showed values similar to those expected for wheat flours in the baking test. Although all equipment used was effective in assessing the behavior of strong and weak flours, the results of medium strength wheat flour varied. WGQA has shown to use less amount of sample and to be faster and easier to use in relation to the other instruments used.

Optimization of amaranth flour films plasticized with glycerol and sorbitol by multi-response analysis

The optimal formulation for the preparation of amaranth flour films plasticized with glycerol and sorbitol was obtained by a multi-response analysis. The optimization aimed to achieve films with higher resistance to break, moderate elongation and lower solubility in water. The influence of plasticizer concentration (Cg, glycerol or Cs, sorbitol) and process temperature (Tp) on the mechanical properties and solubility of the amaranth flour films was initially studied by response surface methodology (RSM). The optimized conditions obtained were Cg 20.02 g glycerol/100 g flour and Tp 75 degrees C, and Cs 29.6 g sorbitol/100 g flour and Tp 75 degrees C. Characterization of the films prepared with these formulations revealed that the optimization methodology employed in this work was satisfactory. Sorbitol was the most suitable plasticizer. It furnished amaranth flour films that were more resistant to break and less permeable to oxygen, due to its greater miscibility with the biopolymers present in the flour and its lower affinity for water. (C) 2011 Elsevier Ltd. All rights reserved.

Physical properties of edible films based on bovine myofibril proteins

Myofibril proteins have excellent filmogenic properties. The objective of this article was to study the effect of the thermal treatment, of the pH and of the plasticizer concentration (Cp) of the filmogenic solution (FS), using over some physical properties of edible films, using a surface and response methodology (SRM). Films were made of lyophilized myofibril proteins (LMP) extracted from bovine muscle, employing the technique of solubility obtained from diluted saline solutions. The films were elaborated from FS containing 1 g of LMP/100g of FS and from Cp of 50 g to 79 g of glycerin/100 g of LMP. The LMP was dispersed in water under moderate agitation, and the pH was kept at 2.5-3.5 with the use of acetic acid. The FS were submitted to thermal treatment at different temperatures for 45 minutes. Films were dried in ventilated oven at 37 degrees C/18hr, conditioned at 75% of relative humidity at 25 degrees C/48 hr before analysis of: mechanical properties by puncture test; apparent opacity by spectrophotometer; solubility by immersion in water; and water vapor permeability by the gravimetric method. In general, films showed good appearance, translucent, easily handled and touchable, except for the films formed with pH 2.5 and at a low temperature (35 degrees C), with a medium thickness of 0.400 +/- 0.005 mm. The pH of the FS significantly affected all the physical properties under study. The temperature of the thermal treatment of the FS greatly affected the force at the rupture, solubility and water vapor permeability. This treatment can promote intermolecular interactions through the formation of disulphide bonds; however a very intense treatment can reverse this effect by irreversible structural alterations in the proteins. The glycerol concentration affected considerably all the properties under study, with the exception of the apparent opacity. Plasticizer increases the mobility of macromolecules with consequences in all physical properties.

Effect of surfactants on the functional properties of gelatin-based edible films

The aim of this research was to evaluate the plasticizing effect of natural surfactants lecithin or yucca extract from Yucca schidigera on gelatin-based films Films containing yucca extract showed higher tensile strength values (similar to 90-40 MPa) and moisture contents (similar to 15%) and less elongation (similar to 5%) and water vapor permeability values (similar to 0 22-009 g mm m(-2) h(-1) kPa(-1)) compared to films containing lecithin Soluble films (similar to 20-50%) were obtained when yucca extract was used while lecithin produced low soluble films (<10%) The opacity of the films (similar to 14 5-16 2%) was similar for both surfactants and the film surface morphologies were continuous and homogeneous X-ray diffraction indicated that the addition of surfactants produced amorphous films compared to gelatin-based films and FT-Infrared spectroscopy showed no evidence of association between the surfactants and the gelatin The plasticizing effect was not obtained after surfactants addition and casting technique (C) 2010 Elsevier Ltd All rights reserved

Functional properties of gelatin-based films containing Yucca schidigera extract produced via casting, extrusion and blown extrusion processes: A preliminary study

Gelatin-based films containing both Yucca schidigera extract and low concentrations of glycerol (0.25-8.75 g per 100 g protein) were produced by extrusion (EF) and characterized in relation to their mechanical properties and moisture content. The formulations that resulted in either larger or smaller elongation values were used to produce films via both blown extrusion (EBF) and casting (CF) and were characterized with respect to their mechanical properties, water vapor permeability, moisture content, solubility, morphology and infrared spectroscopy. The elongation of the EF films was significantly higher than that of the CF and EBF films. The transversal section possessed a compact, homogeneous structure for all of the films studied. The solubility of the films (36-40%) did not differ significantly between the different processes evaluated. The EBF films demonstrated lower water vapor permeability (0.12 g mm m-(2) h(-1) kPa(-1)) than the CF and EF films. The infrared spectra did not indicate any strong interactions between the added compounds. Thermoplastic processing of the gelatin films can significantly increase their elongation; however, a more detailed assessment and optimization of the extrusion conditions is necessary, along with the addition of partially hydrophobic compounds, such as surfactants. (C) 2012 Elsevier Ltd. All rights reserved.

Suppression of gliadins results in altered protein body morphology in wheat

Wheat gluten proteins, gliadins and glutenins, are of great importance in determining the unique biomechanical properties of wheat. Studies have therefore been carried out to determine their pathways and mechanisms of synthesis, folding, and deposition in protein bodies. In the present work, a set of transgenic wheat lines has been studied with strongly suppressed levels of γ-gliadins and/or all groups of gliadins, using light and fluorescence microscopy combined with immunodetection using specific antibodies for γ-gliadins and HMW glutenin subunits. These lines represent a unique material to study the formation and fusion of protein bodies in developing seeds of wheat. Higher amounts of HMW subunits were present in most of the transgenic lines but only the lines with suppression of all gliadins showed differences in the formation and fusion of the protein bodies. Large rounded protein bodies were found in the wild-type lines and the transgenic lines with reduced levels of γ-gliadins, while the lines with all gliadins down-regulated had protein bodies of irregular shape and irregular formation. The size and number of inclusions, which have been reported to contain triticins, were also higher in the protein bodies in the lines with all the gliadins down-regulated. Changes in the protein composition and PB morphology reported in the transgenic lines with all gliadins down-regulated did not result in marked changes in the total protein content or instability of the different fractions.

Trafficking of storage proteins in developing grain of wheat

The processing properties of the wheat flour are largely determined by the structures and interactions of the grain storage proteins (also called gluten proteins) which form a continuous visco-elastic network in dough. Wheat gluten proteins are classically divided into two groups, the monomeric gliadins and the polymeric glutenins, with the latter being further classified into low molecular weight (LMW) and high molecular weight (HMW) subunits. The synthesis, folding and deposition of the gluten proteins take place within the endomembrane system of the plant cell. However, determination of the precise routes of trafficking and deposition of individual gluten proteins in developing wheat grain has been limited in the past by the difficulty of developing monospecific antibodies. To overcome this limitation, a single gluten protein (a LMW subunit) was expressed in transgenic wheat with a C-terminal epitope tag, allowing the protein to be located in the cells of the developing grain using highly specific antibodies. This approach was also combined with the use of wider specificity antibodies to compare the trafficking and deposition of different gluten protein groups within the same endosperm cells. These studies are in agreement with previous suggestions that two trafficking pathways occur in wheat, with the proteins either being transported via the Golgi apparatus into the vacuole or accumulating directly within the lumen of the ER. They also suggest that the same individual protein could be trafficked by either pathway, possibly depending on the stage of development, and that segregation of gluten proteins both between and within protein bodies may occur.

Elaboração e caracterização de filmes comestíveis à base de fécula de mandioca para uso em pós-colheita

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

New aspects in celiac disease

Celiac disease (CD) is a common autoimmune disorder characterized by an immune response to ingested gluten and has a strong HLA association with HLA-DQ2 and HLA-DQ8 molecules, but human HLA-DQ risk factors do not explain the entire genetic susceptibility to gluten intolerance. CD is caused by the lack of immune tolerance (oral tolerance) to wheat gluten. In this sense, the expression of soluble HLA-G in CD is of special interest because the molecule plays an important role in the induction of immune tolerance. The enhanced expression of soluble HLA-G found in CD may be part of a mechanism to restore the gluten intolerance. In this editorial, we review recent progress in understanding CD in relation to its prevalence, diagnosis and possible mechanisms of pathogenesis.

Une nouvelle stratégie de traitement de la maladie cœliaque basée sur les polymères séquestrants

La maladie cœliaque ou sprue cœliaque est une intolérance au gluten. Il s’agit d’une maladie inflammatoire de l’intestin liée à l’ingestion de gluten chez des personnes génétiquement susceptibles. Ce désordre présente une forte prévalence puisqu’il touche 1 % de la population mondiale. En l’état actuel des choses, il n’existe aucun outil pharmacologique pour traiter ou pallier à cette maladie. Cependant, grâce aux avancées dans la compréhension de sa pathogenèse, de nouvelles cibles thérapeutiques ont été identifiées. À l’heure actuelle, le seul traitement efficace consiste à suspendre la consommation de l’agent pathogène, à savoir le gluten. Le gluten est un ensemble de protéines de stockage des céréales contenu dans le blé, l’orge et le seigle. Le gluten du blé se subdivise en gluténines et gliadines. Ce sont ces dernières qui semblent les plus impliquées dans la maladie cœliaque. Les gliadines et ses protéines apparentées (i.e. sécalines et hordéines, respectivement dans le seigle et l’orge) sont riches en prolines et en glutamines, les rendant résistantes à la dégradation par les enzymes digestives et celles de la bordure en brosse. Les peptides résultant de cette digestion incomplète peuvent induire des réponses immunitaires acquises et innées. L’objectif principal de cette thèse était de tester un nouveau traitement d’appoint de la maladie cœliaque utile lors de voyages ou d’évènements ponctuels. Dans les années 80, une observation italienne montra l’inhibition de certains effets induits par des gliadines digérées sur des cultures cellulaires grâce à la co-incubation en présence de mannane: un polyoside naturel composé de mannoses. Malheureusement, ce traitement n’était pas applicable in vivo à cause de la dégradation par les enzymes du tractus gastro-intestinales du polymère, de par sa nature osidique. Les polymères de synthèse, grâce à la diversité et au contrôle de leurs propriétés physico-chimiques, se révèlent être une alternative attrayante à ce polymère naturel. L’objectif de cette recherche était d’obtenir un polymère liant la gliadine, capable d’interférer dans la genèse de la maladie au niveau du tube digestif, afin d’abolir les effets délétères induits par la protéine. Tout d’abord, des copolymères de type poly (hydroxyéthylméthacrylate)-co-(styrène sulfonate) (P(HEMA-co-SS)) ont été synthétisés par polymérisation radicalaire contrôlée par transfert d’atome (ATRP). Une petite bibliothèque de polymères a été préparée en faisant varier la masse molaire, ainsi que les proportions de chacun des monomères. Ces polymères ont ensuite été testés quant à leur capacité de complexer la gliadine aux pH stomacal et intestinal et les meilleurs candidats ont été retenus pour des essais cellulaires. Les travaux ont permis de montrer que le copolymère P(HEMA-co-SS) (45:55 mol%, 40 kDa) permettait une séquestration sélective de la gliadine et qu’il abolissait les effets induits par la gliadine sur différents types cellulaires. De plus, ce composé interférait avec la digestion de la gliadine, suggérant une diminution de peptides immunogènes impliqués dans la maladie. Ce candidat a été testé in vivo, sur un modèle murin sensible au gluten, quant à son efficacité vis-à-vis de la gliadine pure et d’un mélange contenant du gluten avec d’autres composants alimentaires. Le P(HEMA-co-SS) a permis de diminuer les effets sur les paramètres de perméabilité et d’inflammation, ainsi que de moduler la réponse immunitaire engendrée par l’administration de gliadine et celle du gluten. Des études de toxicité et de biodistribution en administration aigüe et chronique ont été réalisées afin de démontrer que ce dernier était bien toléré et peu absorbé suite à son administration par la voie orale. Enfin des études sur des échantillons de tissus de patients souffrants de maladie cœliaque ont montré un bénéfice therapeutique du polymère. L’ensemble des travaux présentés dans cette thèse a permis de mettre en évidence le potentiel thérapeutique du P(HEMA-co-SS) pour prévenir les désordres reliés à l’ingestion de gluten, indiquant que ce type de polymère pourrait être exploité dans un avenir proche.