201186

How is it possible that civilization has a global understanding of the abstraction of the human form? At a subconscious level as humans we have the ability to find the form of the body in the most minimal of shapes, objects, landscape and even natural phenomena such as clouds, it is an ability inherent in human nature. This deep-rooted facility to recognise the human form at various levels of abstraction is also developed further by our life experiences, environment and total education; specifically in the fine and applied arts. For this research I have focused on the change between realistic representations of the human form to complete abstraction. I have broken it down to its most basic elements to explore at what point our visual language allows us to recognise and define a shape or object as being influenced by, or connected to, the human form. I have concentrated on extending my own visual language relating to the human form within my own practice. A series of practical research projects has been undertaken and has been supported by a new series of investigative works, drawings and written evidence of the ways in which the figure can be represented, documenting the process via the thesis and final works. As part of my research, I have investigated the way artists working with clay have abstracted the human form focusing in particular on work from the 1950s to the present day using clay, drawing and installation. I have looked at how, over this period, artists have developed their own visual signifiers of the human form within their abstract/representational creations. The aim of this research will be falls into two parts: • To investigate how far one can push the human form in clay before it moves into abstraction • To locate the vanishing point where viewers still identify the human within ceramic abstract sculpture

Pozzolanic properties of rice husk ash, burnt clay and red mud

In this paper materials like rice husk ash, burnt clay and red mud are examined for their pozzolanic properties. Rice husk ash, obtained from various sources, is analysed by X-ray diffraction. Compressive strength properties of lime-pozzolana mortars with rice husk ash, burnt clay and red mud as pozzolana are studied. Influence of grinding of rice husk ash and intergrinding with lime are also investigated. Combination pozzolana with partial replacement of burnt clay and red mud by rice husk ash are examined for their pozzolanic properties. Long term strength behaviour of lime-pozzolana mortars is investigated to understand the durability of lime-pozzolana cements.

Effect of soil variability on the bearing capacity of clay and in slope stability problems

Site-specific geotechnical data are always random and variable in space. In the present study, a procedure for quantifying the variability in geotechnical characterization and design parameters is discussed using the site-specific cone tip resistance data (qc) obtained from static cone penetration test (SCPT). The parameters for the spatial variability modeling of geotechnical parameters i.e. (i) existing trend function in the in situ qc data; (ii) second moment statistics i.e. analysis of mean, variance, and auto-correlation structure of the soil strength and stiffness parameters; and (iii) inputs from the spatial correlation analysis, are utilized in the numerical modeling procedures using the finite difference numerical code FLAC 5.0. The influence of consideration of spatially variable soil parameters on the reliability-based geotechnical deign is studied for the two cases i.e. (a) bearing capacity analysis of a shallow foundation resting on a clayey soil, and (b) analysis of stability and deformation pattern of a cohesive-frictional soil slope. The study highlights the procedure for conducting a site-specific study using field test data such as SCPT in geotechnical analysis and demonstrates that a few additional computations involving soil variability provide a better insight into the role of variability in designs.

Hybrids between olive flounder Paralichthys olivaceus and stone flounder Kareius bicoloratus: karyotype, allozyme and RAPD analyses

The hybrid between olive flounder Paralichthys olivaceus and stone flounder Kareius bicoloratus was produced by artificial insemination of olive flounder eggs with stone flounder sperm. Sinistral and dextral are two types of hybrid progeny after metamorphosis. Karyotypes of both hybrid flounders are the same as those of the two parental species. Of the 22 loci examined from 12 allozymes, 12 confirmed hybridization of the paternal and maternal loci in hybrids and no difference was found in allozyme patterns of sinistral and dextral hybrid fishes. RAPD patterns of these specimens were also studied with 38 primers selected from 104 tested. Among them, the PCR products of 30 primers showed hybridization of the paternal and maternal bands. Genetic variation between hybrids and their parental stocks was analyzed by RAPD using 10 of the above 38 primers. The average heterozygosity and genetic distance were calculated. The results suggested that the filial generation could inherit a little more genetic materials from paternal fish than that from maternal fish.

The comparative in situ hygrothermal performance of Hemp and Stone Wool insulations in vapour open timber frame wall panels

An in situ experiment in a full scale timber frame test building was carried out to compare the hygrothermal performance of Hemp and Stone Wool insulations of identical thermal conductivity. Hemp and Stone Wool insulations were installed in timber frame wall panels without vapour barrier. The comparison was made in terms of heat transfer properties, likelihood of mould growth and condensation. Step changes in internal relative humidity were performed to explore the effect of high and normal internal moisture load on the wall panels. No significant difference between the average equivalent thermal transmittance (U-values) of the panels incorporating Hemp and Stone Wool insulations was observed. The average equivalent U-values of the panels were closer to the calculated U-values of the panels based on the manufacturers’ declared thermal conductivity of Hemp and Stone Wool insulations. It was observed that the placement of heat flux sensor along the depth of the insulation had significant influence on the measured equivalent U-value of the panels during high internal moisture load. The frequency and likelihood of condensation was higher in the interface of Stone Wool and Oriented Strand Board (OSB). In terms of the parametric assessment of mould germination potential, relative humidity, temperature and exposure conditions in the insulation-OSB interfaces were found to be favourable to germination of mould spore. However, when the insulations were dismantled, no mould was visually detected.

Quasi steady state and dynamic hygrothermal performance of fibrous Hemp and Stone Wool insulations: Two innovative laboratory based investigations

Moisture and heat management properties of Hemp and Stone Wool insulations were studied by mounting them between a hot and a cold climate chamber. Both insulations were exposed to identical hygrothermal boundary conditions. Quasi steady state and dynamic tests were carried out at a range of relative humidity exposures. The likelihood of interstitial condensation was assessed and equivalent thermal conductivity values of the insulations were determined. The adsorption-desorption isotherms of the insulations were also determined in a dynamic vapour sorption (DVS) instrument. It was observed that the likelihood of condensation was higher in Stone Wool insulation than in Hemp insulation. Hemp insulation performed better in managing moisture due to its high hygric inertia and water absorption capacity. It was observed that the equivalent thermal conductivity of Stone Wool insulation was dependent on enthalpy flow and phase change of moisture. The equivalent thermal conductivity of Hemp insulation was close to its declared thermal conductivity in dynamic conditions when high relative humidity exposures were transient. In quasi steady state boundary conditions, when the insulation was allowed to reach the equilibrium moisture content at ranges of relative humidity, there was a moisture dependent increase of thermal conductivity in Hemp insulation.

Poetry and feminine crafts in the letters of the young Marquise of Alorna (1750-1839)

abstract : Taking as a starting point the association between embroidery and language conveyed by the Greek myth of Filomela and Procne, this article examines the relationship between social status and ornaments like embroidery and lace. In order to illustrate this relationship an example is selected form the letters exchanged between the Marquise of Alorna and her Father where a connection is established between the production of these 'feminine' crafts, women's culture and womens writing, in the XVIIIth Century

Receipt from J.D. Hibbard for brick and stone work

Receipt from J.D. Hibbard for brick and stone work, Dec. 14, 1876.

Acetalization of ketones on K-10 clay and rare earth exchanged HFAU-Y zeolites: A mild and facile procedure for the synthesis of dimethylacetals

Dimethylacetals of ketones; cyclohexanone, acetophenone, and benzophenone have been prepared by reacting ketones with methanol under mild reaction conditions. Large pore zeolites (H-Y and its rare earth metal, Ce3+, La3+, and RE3+ modified forms), and mesoporous clay (K-10 montmorillonite and its cerium exchanged counterpart) with regular pore structure, silica and silica-alumina have been used as catalysts. Clay catalysts are found to be much more active than zeolites, thanks to slightly bigger pore size. The nature of the pores of the solid acid catalysts determine acetalization efficiency of a particular catalyst. As evidenced by the reaction time studies, the catalyst decay is greater over the zeolites than over the clays. Carrying out the reaction with ketones of different molecular sizes it is shown that K-10 clays and rare earth exchanged H-Y zeolites are promising environmentally friendly catalysts for their use in the production fine chemicals.

Effect of pore size on the catalytic activities of K-I 0 clay and H-zeolites for the acetalization of ketones with methanol

One-pot acetalizations of cyclohexanone. acetophenone and benzophenone were carried out using methanol over H-montmorillonite clay (a mesoporous material). silica, alumina, and different zeolites such as HFAU-Y.HBeta, H-ZSM-5, and H-mordenite. In all the cases a single product-the corresponding dimethylacetal-was obtained in high yields. Hemiacetal formation was not observed with any catalyst. A comparison of catalytic activity indicated that montmorillonite K-10 is the most active catalyst for the reaction. As evidenced by the reaction time studies, the catalyst decay is greater over the zeolite catalyst than over the clay.