Virtual Model Control of a Biped Walking Robot

The transformation from high level task specification to low level motion control is a fundamental issue in sensorimotor control in animals and robots. This thesis develops a control scheme called virtual model control which addresses this issue. Virtual model control is a motion control language which uses simulations of imagined mechanical components to create forces, which are applied through joint torques, thereby creating the illusion that the components are connected to the robot. Due to the intuitive nature of this technique, designing a virtual model controller requires the same skills as designing the mechanism itself. A high level control system can be cascaded with the low level virtual model controller to modulate the parameters of the virtual mechanisms. Discrete commands from the high level controller would then result in fluid motion. An extension of Gardner's Partitioned Actuator Set Control method is developed. This method allows for the specification of constraints on the generalized forces which each serial path of a parallel mechanism can apply. Virtual model control has been applied to a bipedal walking robot. A simple algorithm utilizing a simple set of virtual components has successfully compelled the robot to walk eight consecutive steps.

Virtual Model Control of a Hexapod Walking Robot

Since robots are typically designed with an individual actuator at each joint, the control of these systems is often difficult and non-intuitive. This thesis explains a more intuitive control scheme called Virtual Model Control. This thesis also demonstrates the simplicity and ease of this control method by using it to control a simulated walking hexapod. Virtual Model Control uses imagined mechanical components to create virtual forces, which are applied through the joint torques of real actuators. This method produces a straightforward means of controlling joint torques to produce a desired robot behavior. Due to the intuitive nature of this control scheme, the design of a virtual model controller is similar to the design of a controller with basic mechanical components. The ease of this control scheme facilitates the use of a high level control system which can be used above the low level virtual model controllers to modulate the parameters of the imaginary mechanical components. In order to apply Virtual Model Control to parallel mechanisms, a solution to the force distribution problem is required. This thesis uses an extension of Gardner`s Partitioned Force Control method which allows for the specification of constrained degrees of freedom. This virtual model control technique was applied to a simulated hexapod robot. Although the hexapod is a highly non-linear, parallel mechanism, the virtual models allowed text-book control solutions to be used while the robot was walking. Using a simple linear control law, the robot walked while simultaneously balancing a pendulum and tracking an object.

Generating virtual environments to allow increased access to the built environment

The problems encountered by individuals with disabilities when accessing large public buildings is described and a solution based on the generation of virtual models of the built environment is proposed. These models are superimposed on a control network infrastructure, currently utilised in intelligent building applications such as lighting, heating and access control. The use of control network architectures facilitates the creation of distributed models that closely mirror both the physical and control properties of the environment. The model of the environment is kept local to the installation which allows the virtual representation of a large building to be decomposed into an interconnecting series of smaller models. This paper describes two methods of interacting with the virtual model, firstly a two dimensional aural representation that can be used as the basis of a portable navigational device. Secondly an augmented reality called DAMOCLES that overlays additional information on a user’s normal field of view. The provision of virtual environments offers new possibilities in the man-machine interface so that intuitive access to network based services and control functions can be given to a user.

Chemometric analysis of Hymenoptera toxins and defensins: A model for predicting the biological activity of novel peptides from venoms and hemolymph

When searching for prospective novel peptides, it is difficult to determine the biological activity of a peptide based only on its sequence. The trial and error approach is generally laborious, expensive and time consuming due to the large number of different experimental setups required to cover a reasonable number of biological assays. To simulate a virtual model for Hymenoptera insects, 166 peptides were selected from the venoms and hemolymphs of wasps, bees and ants and applied to a mathematical model of multivariate analysis, with nine different chemometric components: GRAVY, aliphaticity index, number of disulfide bonds, total residues, net charge, pI value, Boman index, percentage of alpha helix, and flexibility prediction. Principal component analysis (PCA) with non-linear iterative projections by alternating least-squares (NIPALS) algorithm was performed, without including any information about the biological activity of the peptides. This analysis permitted the grouping of peptides in a way that strongly correlated to the biological function of the peptides. Six different groupings were observed, which seemed to correspond to the following groups: chemotactic peptides, mastoparans, tachykinins, kinins, antibiotic peptides, and a group of long peptides with one or two disulfide bonds and with biological activities that are not yet clearly defined. The partial overlap between the mastoparans group and the chemotactic peptides, tachykinins, kinins and antibiotic peptides in the PCA score plot may be used to explain the frequent reports in the literature about the multifunctionality of some of these peptides. The mathematical model used in the present investigation can be used to predict the biological activities of novel peptides in this system, and it may also be easily applied to other biological systems. © 2011 Elsevier Inc.

Sistema avançado de realidade virtual para visualização de estruturas odontológicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de um sensor virtual para processos não-lineares e variantes no tempo, com aplicação em planta de neutralização de PH

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A new 3D modelling paradigm for discrete model

Until few years ago, 3D modelling was a topic confined into a professional environment. Nowadays technological innovations, the 3D printer among all, have attracted novice users to this application field. This sudden breakthrough was not supported by adequate software solutions. The 3D editing tools currently available do not assist the non-expert user during the various stages of generation, interaction and manipulation of 3D virtual models. This is mainly due to the current paradigm that is largely supported by two-dimensional input/output devices and strongly affected by obvious geometrical constraints. We have identified three main phases that characterize the creation and management of 3D virtual models. We investigated these directions evaluating and simplifying the classic editing techniques in order to propose more natural and intuitive tools in a pure 3D modelling environment. In particular, we focused on freehand sketch-based modelling to create 3D virtual models, interaction and navigation in a 3D modelling environment and advanced editing tools for free-form deformation and objects composition. To pursuing these goals we wondered how new gesture-based interaction technologies can be successfully employed in a 3D modelling environments, how we could improve the depth perception and the interaction in 3D environments and which operations could be developed to simplify the classical virtual models editing paradigm. Our main aims were to propose a set of solutions with which a common user can realize an idea in a 3D virtual model, drawing in the air just as he would on paper. Moreover, we tried to use gestures and mid-air movements to explore and interact in 3D virtual environment, and we studied simple and effective 3D form transformations. The work was carried out adopting the discrete representation of the models, thanks to its intuitiveness, but especially because it is full of open challenges.

Model based experimental investigation on Powered Gait Orthosis (PGO)

Research on rehabilitation showed that appropriate and repetitive mechanical movements can help spinal cord injured individuals to restore their functional standing and walking. The objective of this paper was to achieve appropriate and repetitive joint movements and approximately normal gait through the PGO by replicating normal walking, and to minimize the energy consumption for both patients and the device. A model based experimental investigative approach is presented in this dissertation. First, a human model was created in Ideas and human walking was simulated in Adams. The main feature of this model was the foot ground contact model, which had distributed contact points along the foot and varied viscoelasticity. The model was validated by comparison of simulated results of normal walking and measured ones from the literature. It was used to simulate current PGO walking to investigate the real causes of poor function of the current PGO, even though it had joint movements close to normal walking. The direct cause was one leg moving at a time, which resulted in short step length and no clearance after toe off. It can not be solved by simply adding power on both hip joints. In order to find a better answer, a PGO mechanism model was used to investigate different walking mechanisms by locking or releasing some joints. A trade-off between energy consumption, control complexity and standing position was found. Finally a foot release PGO virtual model was created and simulated and only foot release mechanism was developed into a prototype. Both the release mechanism and the design of foot release were validated through the experiment by adding the foot release on the current PGO. This demonstrated an advancement in improving functional aspects of the current PGO even without a whole physical model of foot release PGO for comparison.

The virtual patient in dental medicine

OBJECTIVES The aim of this Short Communication was to present a workflow for the superimposition of intraoral scan (IOS), cone-beam computed tomography (CBCT), and extraoral face scan (EOS) creating a 3D virtual dental patient. MATERIAL AND METHODS As a proof-of-principle, full arch IOS, preoperative CBCT, and mimic EOS were taken and superimposed to a unique 3D data pool. The connecting link between the different files was to detect existing teeth as constant landmarks in all three data sets. RESULTS This novel application technique successfully demonstrated the feasibility of building a craniofacial virtual model by image fusion of IOS, CBCT, and EOS under 3D static conditions. CONCLUSIONS The presented application is the first approach that realized the fusion of intraoral and facial surfaces combined with skeletal anatomy imaging. This novel 3D superimposition technique allowed the simulation of treatment planning, the exploration of the patients' expectations, and the implementation as an effective communication tool. The next step will be the development of a real-time 4D virtual patient in motion.

O ensino e aprendizagem da programação de computadores no ensino a distância : uma proposta de instanciação do modelo pedagógico virtual da Universidade Aberta

Hoje em dia o ensino e aprendizagem a distância online de nível universitário é, em grande medida, baseado em estratégias de aprendizagem colaborativa, onde, além de aprender sozinho, os estudantes também participam de ações colaborativas dentro de uma classe virtual. O nível de interação do estudante online representa um fator fundamental para o sucesso do processo de ensino-aprendizagem pois é a base da partilha de informação e construção do conhecimento entre estudantes e professores, enquanto todas as ações e atividades integram um modelo pedagógico comum. Existem muitas diferenças e desafios nas áreas de ensino em termos de instanciação do modelo pedagógico e adoção das estratégias de ensino-aprendizagem, como por exemplo, entre as áreas das ciências sociais e das engenharias. Uma área que atrai especial atenção como um todo é a das ciências da computação (CS), e de forma específica, a da programação de computadores. A programação de computadores exige, em primeiro lugar, o desenvolvimento de um bom raciocínio lógico e uma estratégia de resolução segundo uma abordagem “dividir para conquistar”, onde os principais problemas são divididos em problemas menores que são resolvidos individualmente. A programação exige também uma combinação entre o trabalho individual e em grupo, com elevados níveis de revisão e depuração do código fonte em desenvolvimento. O ensino online de programação de computadores é constituído por estes aspectos, exigindo um elevado grau de interação entre estudantes e entre estudantes e professor. Neste capítulo, vamos discutir e apresentar a nossa experiência no ensino online da programação de computadores com base no modelo pedagógico virtual da Universidade Aberta, e propor a sua instanciação e extensão específica para incluir novas estratégias de aprendizagem colaborativa e uma abordagem construtivista para o processo global de aprendizagem.

When the virtual influences reality. The conservation project of the toledo gate in ciudad real (Spain)

The Toledo Gate of Ciudad Real, Spain, constructed between the late 13th and early 14th centuries, is the last remaining portion of a once complete medieval city wall. It represents the long history of the city and constitutes its main heritage symbol, dividing the historic city centre from the later 19th and 20th century expansions. In October 2012, the Town Hall and the Montemadrid Foundation started the conservation works to preserve this important monument. The preliminary phase of this project included an in-depth series of scientific studies which were carried out by a multidisciplinary team focusing on archival research, historic investigations, archaeological excavations as well as material composition analysis and main treatment application tests. As a result of these studies a series of virtual 3D models were created to inform, discuss and study the monument. A first digital model permitted visualization of the gate in the 19th century and how the main entrance to the city was integrated as a fundamental part of the city walls. This virtual reconstruction also became an important part of the campaign to raise awareness among the citizens towards a monument that had remained in the shadows for the last century, isolated in a roundabout after the systematic demolition of the city walls in the late 19th century. Over the last three years and as a result of these archaeological and historic investigations and subsequent virtual models, surprisingly new and interesting data were brought to light thus permitting the establishment and corroboration of a new and updated hypothesis of the Toledo Gate that goes beyond the previous ideas. As a result of these studies a new architectural typology with construction techniques of has been suggested. This paper describes how the results of this continuous and interdisciplinary documentation process have benefitted from a computer graphic reconstruction of the gate. It highlights how virtual reconstruction can be a powerful tool for conservation decision making and awareness raising. Furthermore, the interesting results of the final reconstruction hypothesis convinced the technical team responsible for the conservation to alter some aspects of the final project physical interventions in order to focus on some of the features and conclusions discovered through the virtual model study.

Diagnóstico Energético e Modelação Energética de uma Piscina Municipal

Mestrado em Engenharia Mecânica – Ramo Energia

Simulação de Robôs Quadrúpedes Utilizando o SimMechanics

Desde sempre o Homem procurou automatizar tarefas repetitivas. Tanto na indústria como no sector doméstico ou de comércio estão constantemente a surgir novos equipamentos procurando aumentar o nível de automação de diversas tarefas. A necessidade de empresas criadoras de produtos inovadores se manterem concorrenciais obrigou à adopção de métodos de projecto e planeamento mais estruturados e eficientes que eliminem os desperdícios tanto de material como de tempo. Diversas construções em termos orçamentais e o aumento da procura de produtos de alta qualidade a baixo custo deu origem a um novo tipo de programas, os programas de simulação virtual. Tal como na indústria, também na investigação nas Instituições de Ensino Superior se procuram adoptar os métodos de trabalho mais eficientes possíveis. Uma parte dos programas de simulação robótica utilizados hoje em dia na investigação no Instituto Superior de Engenharia do Porto estão concebidos em linguagem C. Embora esta linguagem seja extremamente capaz, existem métodos mais adequados de simulação que aceleram o processo de modelação permitindo a visualização do movimento e simulação de diversas situações potencialmente criticas sem existir a necessidade de construção de um protótipo funcional do robô. Durante o último ano, este projecto permitiu construir um modelo de um robô quadrúpede num programa de simulação virtual chamado Simmechanics™. Embora haja já algum trabalho desenvolvido nesta área, constatou-se que a informação existente possuía algumas lacunas. Com o trabalho desenvolvido preparou-se esta dissertação que pretende clarificar algumas questões que surgem na modelação de um robô. Neste documento explica-se como modelar um robô de corpo flexível, modelar as pernas e as respectivas juntas da anca e do joelho assim como também se apresenta a modelação de um contacto com o solo recorrendo a um modelo descrito na literatura. Este documento foi escrito a pensar no leitor, procurando-se explicar de forma simples mas concisa os diversos passos necessários para construir um modelo virtual de um robô. O autor espera, desta forma, ajudar futuros colegas que pretendam trabalhar com o Simmechanics™ a mais facilmente se integrarem com o programa aumentando desta forma o declive da curva de aprendizagem e permitindo um maior aproveitamento desta ferramenta.

Metodologia BIM, aplicada à preparação, controlo e gestão de obra

O âmbito deste trabalho envolve o teste do modelo BIM numa obra em construção pela Mota-Engil – Engenharia, na extração experimental de peças desenhadas de preparação e apoio à execução de obra. No capítulo 1 deste relatório são definidos o âmbito e os objetivos deste trabalho, é feito um enquadramento histórico do tema e abordados conceitos e atividades da preparação de obra, na sua forma tradicional. O estado do conhecimento da preparação de obras e mais em concreto da tecnologia BIM a nível nacional e internacional é abordado no capítulo 2. Nesse sentido procura-se definir os conceitos principais inerentes a esta nova metodologia, que passa por identificar e caraterizar a tecnologia envolvida e o seu nível de desenvolvimento. Com suporte em casos práticos de preparação de obra na sua forma tradicional, identificados e desenvolvidos no capítulo 3, foi compilado um processo tipo de peças desenhadas de suporte identificadas e caracterizadas no capítulo 4, frequentes e comuns à execução de diversos tipos de obras de edifícios. Assente na compilação baseada em casos práticos e no estudo do projeto de execução da empreitada que sustenta o presente trabalho, com base no qual o modelo BIM foi concebido, identificou-se um conjunto de peças desenhadas de preparação e apoio à execução dos trabalhos, em 2D, a extrair do modelo. No capítulo 5, é feita uma descrição do modo como foi estudado o projeto da obra, com evidência para os fatores mais relevantes, especificando os desenhos a extrair. Suportada pelo programa de modelação ArchiCAD, a extração do conjunto de desenhos identificados anteriormente foi conseguida com recurso às funcionalidades disponíveis no software, que permite a criação de desenhos 2D atualizáveis ou não automaticamente a partir do modelo. Qualquer alteração introduzida no modelo virtual é automaticamente atualizada nos desenhos bidimensionais, caso o utilizador assim o pretenda. Ao longo desse trabalho foram detetados e analisados os condicionalismos inerentes ao processo de extração, referidos no capítulo 6, para estabelecimento de regras de modelação padrão a adotar em futuras empreitadas, que possam simplificar a obtenção dos elementos desenhados de preparação necessários à sua execução. No ponto 6.3 são identificadas melhorias a introduzir no modelo. Em conclusão no capítulo 7 são abordadas especificidades do setor da construção que sustentam e evidenciam cada vez mais a necessidade de utilizar as novas tecnologias com vista à adoção de práticas e ferramentas padrão de apoio à execução de obras. Sendo a tecnologia BIM, transversal a todo o setor, a sua utilização com regras padrão na conceção dos modelos e na extração de dados, potencia a otimização dos custos, do tempo, dos recursos e da qualidade final de um empreendimento, ao longo de todo o seu ciclo de vida, para além de apoiar com elevada fiabilidade as tomadas de decisão ao longo desse período. A tecnologia BIM, possibilita a antevisão do edifício a construir com um elevado grau de pormenor, com todas as vantagens que daí advêm.

Desenvolvimento de um laboratório pedagógico de vias de comunicação na Universidade do Minho

Dissertação de mestrado integrado em Engenharia Civil