Estudo de Ferramentas FEA Comerciais na Simulação Numérica de Processos de Conformação de Chapas Metálicas. Aplicação à Indústria Automóvel.

Os componentes obtidos através da conformação plástica de chapas têm uma grande importância, tanto na etapa de concepção do produto como na etapa de produção na indústria automóvel. Isto comprova-se pelo facto de, em média, cada automóvel integrar cerca de 500 componentes estampados para construir o chassis e a carroçaria [Alves 2003]. Deste total de componentes, 50 são de grandes dimensões (portas, tejadilho, painéis inferior e laterais, entre outros) e necessitam, em média, de cinco ferramentas para o seu fabrico, sendo o custo estimado para cada ferramenta de 230 000 € [Col 2000, Alves 2003]. Para além da indústria automóvel, a conformação plástica de chapas metálicas é um processo tecnológico presente nas indústrias relativas à aeroespacial, petrolífera, decoração, alimentar, entre outras. Do ponto de vista do enquadramento económico, cerca de 20% do custo total de um automóvel novo é devido à incorporação de componentes metálicos estampados. [Alves 2003]. A pressão do “Mercado Global” faz com que os custos relativos à matéria-prima, energia e mão-de-obra sejam uma constante em termos de redução do seu impacte no orçamento das empresas fornecedoras destes produtos. É neste contexto que surge a necessidade da realização deste estudo de Benchmark de Softwares, tornando-se bastante importante, quer ao nível da competitividade industrial, quer ao nível da inovação para novos produtos. A análise por elementos finitos desempenha um papel primordial no tryout virtual e otimização das ferramentas e processos de conformação plástica. Os objetivos principais deste estudo de simulação numérica são a identificação e comparação dos resultados obtidos pelo AUTOFORM e pelo PAMSTAMP, para cada uma das variáveis identificadas como as mais influentes na robustez dos processos de estampagem de chapa metálica. Estas variáveis identificadas são: consumo de material (Draw-in) após conformação; forças de conformação; valores de variação de espessura e dos valores de extensão e resultados de Springback. Os resultados obtidos são comparados com os resultados experimentais e, desta forma, avalia-se a capacidade inovadora e a eficácia de cada um dos softwares, obtendo-se assim, uma orientação mais real para o software mais indicado aos objetivos impostos pela indústria automóvel. Para este efeito, a indústria automóvel, como maior impulsionador e motor da investigação na área da simulação numérica aplicada aos processos de estampagem, tem aderido em peso ao Benchmarking. Um exemplo disto, é o que acontece nas conferências Numisheet. O Benchmark #2 da conferência Numisheet 2008 é analisado pormenorizadamente e os resultados numéricos e experimentais são comparados e apresentados. Dois materiais distintos (aço HC260LAD e liga de alumínio AC170), assim como três modelos com geometrias diferentes (com e sem freios) são apresentados neste relatório. Com vista à redução dos ciclos tentativa-erro, tem-se adotado ciclos virtuais ou numéricos e tem-se incrementado a interatividade entre as fases de concepção e projeto, num conceito muito próprio, mas cada vez mais abrangente, denominado “produção virtual”. É nesta filosofia que se insere a simulação numérica dos processos de conformação de chapa.

Finite element aided design evolution of composite leaf spring

This paper shows the process of the virtual production development of the mechanical connection between the top leaf of a dual composite leaf spring system to a shackle using finite element methods. The commercial FEA package MSC/MARC has been used for the analysis. In the original design the joint was based on a closed eye-end. Full scale testing results showed that this configuration achieved the vertical proof load of 150 kN and 1 million cycles of fatigue load. However, a problem with delamination occurred at the interface between the fibres going around the eye and the main leaf body. To overcome this problem, a second design was tried using transverse bandages of woven glass fibre reinforced tape to wrap the section that is prone to delaminate. In this case, the maximum interlaminar shear stress was reduced by a certain amount but it was still higher than the material’s shear strength. Based on the fact that, even with delamination, the top leaf spring still sustained the maximum static and fatigue loads required, the third design was proposed with an open eye-end, eliminating altogether the interface where the maximum shear stress occurs. The maximum shear stress predicted by FEA is reduced significantly and a safety factor of around 2 has been obtained. Thus, a successful and safe design has been achieved.

Um sistema de rastreamento de câmeras para estúdios virtuais

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Students' collective knowledge construction in the virtual learning environment ""ToLigado - your school interactive newspaper""

Introduction. The ToLigado Project - Your School Interactive Newspaper is an interactive virtual learning environment conceived, developed, implemented and supported by researchers at the School of the Future Research Laboratory of the University of Sao Paulo, Brazil. Method. This virtual learning environment aims to motivate trans-disciplinary research among public school students and teachers in 2,931 schools equipped with Internet-access computer rooms. Within this virtual community, students produce collective multimedia research documents that are immediately published in the portal. The project also aims to increase students' autonomy for research, collaborative work and Web authorship. Main sections of the portal are presented and described. Results. Partial results of the first two years' implementation are presented and indicate a strong motivation among students to produce knowledge despite the fragile hardware and software infrastructure at the time. Discussion. In this new environment, students should be seen as 'knowledge architects' and teachers as facilitators, or 'curiosity managers'. The ToLigado portal may constitute a repository for future studies regarding student attitudes in virtual learning environments, students' behaviour as 'authors', Web authorship involving collective knowledge production, teachers' behaviour as facilitators, and virtual learning environments as digital repositories of students' knowledge construction and social capital in virtual learning communities.

Detailed measurement of the e(+)e(-) pair continuum in p plus p and Au plus Au collisions at root s(NN)=200 GeV and implications for direct photon production

PHENIX has measured the e(+)e(-) pair continuum in root s(NN) = 200 GeV Au+Au and p+p collisions over a wide range of mass and transverse momenta. The e(+)e(-) yield is compared to the expectations from hadronic sources, based on PHENIX measurements. In the intermediate-mass region, between the masses of the phi and the J/psi meson, the yield is consistent with expectations from correlated c (c) over bar production, although other mechanisms are not ruled out. In the low-mass region, below the phi, the p+p inclusive mass spectrum is well described by known contributions from light meson decays. In contrast, the Au+Au minimum bias inclusive mass spectrum in this region shows an enhancement by a factor of 4.7 +/- 0.4(stat) +/- 1.5(syst) +/- 0.9(model). At low mass (m(ee) < 0.3 GeV/c(2)) and high p(T) (1 < p(T) < 5 GeV/c) an enhanced e(+)e(-) pair yield is observed that is consistent with production of virtual direct photons. This excess is used to infer the yield of real direct photons. In central Au+Au collisions, the excess of the direct photon yield over the p+p is exponential in p(T), with inverse slope T = 221 +/- 19(stat) +/- 19(syst) MeV. Hydrodynamical models with initial temperatures ranging from T(init) similar or equal to 300-600 MeV at times of 0.6-0.15 fm/c after the collision are in qualitative agreement with the direct photon data in Au+Au. For low p(T) < 1 GeV/c the low-mass region shows a further significant enhancement that increases with centrality and has an inverse slope of T similar or equal to 100 MeV. Theoretical models underpredict the low-mass, low-p(T) enhancement.

Virtual plants - integrating architectural and physiological models

Recent advances in computer technology have made it possible to create virtual plants by simulating the details of structural development of individual plants. Software has been developed that processes plant models expressed in a special purpose mini-language based on the Lindenmayer system formalism. These models can be extended from their architectural basis to capture plant physiology by integrating them with crop models, which estimate biomass production as a consequence of environmental inputs. Through this process, virtual plants will gain the ability to react to broad environmental conditions, while crop models will gain a visualisation component. This integration requires the resolution of the fundamentally different time scales underlying the approaches. Architectural models are usually based on physiological time; each time step encompasses the same amount of development in the plant, without regard to the passage of real time. In contrast, physiological models are based in real time; the amount of development in a time step is dependent on environmental conditions during the period. This paper provides a background on the plant modelling language, then describes how widely-used concepts of thermal time can be implemented to resolve these time scale differences. The process is illustrated using a case study. (C) 1997 Elsevier Science Ltd.

Human-Human Collaboration in Virtual Teams

Extended and networked enterprises distribute the design of products, planning of the production process, and manufacturing regionally if not globally. Employees are therefore confronted with collaborative work over remote sites. A cost effective collaboration depends highly on the organization maintaining a common understanding for this kind of work and a suitable support with information and communication technology. The usual face to face work is going to be replaced at least partly if not totally by computer mediated collaboration. Creating and maintaining virtual teams is a challenge to work conditions as well as technology. New developments on cost-effective connections are providing not only vision and auditory perception but also haptic perception. Research results for improving remote collaboration are presented. Individual, social and cultural aspects are considered as new requirements on the employees of networked and extended enterprises.

Gestão de Recursos Energéticos para Apoio à Operação dos Virtual Power Players

A liberalização dos mercados de energia elétrica e a crescente integração dos recursos energéticos distribuídos nas redes de distribuição, nomeadamente as unidades de produção distribuída, os sistemas de controlo de cargas através dos programas de demand response, os sistemas de armazenamento e os veículos elétricos, representaram uma evolução no paradigma de operação e gestão dos sistemas elétricos. Este novo paradigma de operação impõe o desenvolvimento de novas metodologias de gestão e controlo que permitam a integração de todas as novas tecnologias de forma eficiente e sustentável. O principal contributo deste trabalho reside no desenvolvimento de metodologias para a gestão de recursos energéticos no contexto de redes inteligentes, que contemplam três horizontes temporais distintos (24 horas, 1 hora e 5 minutos). As metodologias consideram os escalonamentos anteriores assim como as previsões atualizadas de forma a melhorar o desempenho total do sistema e consequentemente aumentar a rentabilidade dos agentes agregadores. As metodologias propostas foram integradas numa ferramenta de simulação, que servirá de apoio à decisão de uma entidade agregadora designada por virtual power player. Ao nível das metodologias desenvolvidas são propostos três algoritmos de gestão distintos, nomeadamente para a segunda (1 hora) e terceira fase (5 minutos) da ferramenta de gestão, diferenciados pela influência que os períodos antecedentes e seguintes têm no período em escalonamento. Outro aspeto relevante apresentado neste documento é o teste e a validação dos modelos propostos numa plataforma de simulação comercial. Para além das metodologias propostas, a aplicação permitiu validar os modelos dos equipamentos considerados, nomeadamente, ao nível das redes de distribuição e dos recursos energéticos distribuidos. Nesta dissertação são apresentados três casos de estudos, cada um com diferentes cenários referentes a cenários de operação futuros. Estes casos de estudos são importantes para verificar a viabilidade da implementação das metodologias e algoritmos propostos. Adicionalmente são apresentadas comparações das metodologias propostas relativamente aos resultados obtidos, complexidade de gestão em ambiente de simulação para as diferentes fases da ferramenta proposta e os benefícios e inconvenientes no uso da ferramenta proposta.

Are virtual planning and guided surgery for head and neck reconstruction economically viable?

PURPOSE: Virtual planning and guided surgery with or without prebent or milled plates are becoming more and more common for mandibular reconstruction with fibular free flaps (FFFs). Although this excellent surgical option is being used more widely, the question of the additional cost of planning and cutting-guide production has to be discussed. In capped payment systems such additional costs have to be offset by other savings if there are no special provisions for extra funding. Our study was designed to determine whether using virtual planning and guided surgery resulted in time saved during surgery and whether this time gain resulted in self-funding of such planning through the time saved. MATERIALS AND METHODS: All consecutive cases of FFF surgery were evaluated during a 2-year period. Institutional data were used to determine the price of 1 minute of operative time. The time for fibula molding, plate adaptation, and insetting was recorded. RESULTS: During the defined period, we performed 20 mandibular reconstructions using FFFs, 9 with virtual planning and guided surgery and 11 freehand cases. One minute of operative time was calculated to cost US $47.50. Multiplying this number by the time saved, we found that the additional cost of virtual planning was reduced from US $5,098 to US $1,231.50 with a prebent plate and from US $6,980 to US $3,113.50 for a milled plate. CONCLUSIONS: Even in capped health care systems, virtual planning and guided surgery including prebent or milled plates are financially viable.

Open video tools to support the production of online collaborative audiovisual projects : how to promote collective creation in e-learning

This paper analyses the use of open video editing tools to support the creation and production of online collaborative audiovisual projects for higher education. It focuses on the possibilities offered by these tools to promote collective creation in virtual environments.

Production of OER, a Quest for Efficiency

In most initiatives to publish Open Educational Resources (OER), the production of OER is the activity with the highest costs. Based on literature and personal experiences a list of relevant characteristics of production processes for OER are determined. Three cases are compared with each other on these characteristics. Most influence on costs are human costs and the type of OER created.

Impactia: automating the study of the scientific production

Introduction The Andalusian Public Health System Virtual Library (Biblioteca Virtual del Sistema Sanitario Público de Andalucía, BV-SSPA) was set up in June 2006. It consists of a regional government action with the aim of democratizing the health professional access to quality scientific information, regardless of the professional workplace. Andalusia is a region with more than 8 million inhabitants, with 100,000 health professionals for 41 hospitals, 1,500 primary healthcare centres, and 28 centres for non-medical attention purposes (research, management, and educational centres). Objectives The Department of Development, Research and Investigation (R+D+i) of the Andalusian Regional Government has, among its duties, the task of evaluating the hospitals and centres of the Andalusian Public Health System (SSPA) in order to distribute its funding. Among the criteria used is the evaluation of the scientific output, which is measured using bibliometry. It is well-known that the bibliometry has a series of limitations and problems that should be taken into account, especially when it is used for non-information sciences, such us career, funding, etc. A few years ago, the bibliometric reports were done separately in each centre, but without using preset and well-defined criteria, elements which are basic when we need to compare the results of the reports. It was possible to find some hospitals which were including Meeting Abstracts in their figures, while others do not, and the same was happening with Erratum and many other differences. Therefore, the main problem that the Department of R+D+i had to deal with, when they were evaluating the health system, was that bibliometric data was not accurate and reports were not comparable. With the aim of having an unified criteria for the whole system, the Department of R+D+i ordered the BV-SSPA to do the year analysis of the scientific output of the system, using some well defined criteria and indicators, among whichstands out the Impact Factor. Materials and Methods As the Impact Factor is the bibliometric indicator that the virtual library is asked to consider, it is necessary to use the database Web of Science (WoS), since it is its owner and editor. The WoS includes the databases Science Citation Index (SCI), Social Sciences Citation Index (SSCI) and Arts & Humanities Citation Index. To gather all the documents, SCI and SSCI are used; to obtain the Impact Factor and quartils, it is used the Journal Citation Reports, JCR. Unlike other bibliographic databases, such us MEDLINE, the bibliometric database WoS includes the address of all the authors. In order to retrieve all the scientific output of the SSPA, we have done general searches, which are afterwards processed by a tool developed by our library. We have done nine different searches using the field ‘address’; eight of them including ‘Spain’ and each one of the eight Andalusian Regions, and the other one combining ‘Spain’ with all those cities where there are health centres, since we have detected that there are some authors that do not use the region in their signatures. These are some of the search strategies: AD=Malaga and AD=Spain AD=Sevill* and AD=Spain AD=SPAIN AND (AD=GUADIX OR AD=BAZA OR AD=MOTRIL) Further more, the field ‘year’ is used to determine the period. To exploit the data, the BV-SSPA has developed a tool called Impactia. It is a web application which uses a database to store the information of the documents generated by the SSPA. Impactia allows the user to automatically process the retrieved documents, assigning them to their correspondent centres. In order to do the classification of documents automaticaly, it was necessary to detect the huge variability of names of the centres that the authors use in their signatures. Therefore, Impactia knows that if an author signs as “Hospital Universitario Virgen Macarena”, “HVM” or “Hosp. Virgin Macarena”, he belongs to the same centre. The figure attached shows the variability found for the Empresa Publica Hospital de Poniente. Besides the documents from WoS, Impactia includes the documents indexed in Scopus and in other databases, where we do bibliographic searches using similar strategies to the later ones. Aware that in the health centres and hospitals there is a lot of grey literature that is not gathered in databases, Impactia allows the centres to feed the application with these documents, so that all the SSPA scientific output is gathered and organised in a centralized place. The ones responsible of localizing this gray literature are the librarians of each one of the centres. They can also do statements to the documents and indicators that are collected and calculated by Impactia. The bulk upload of documents from WoS and Scopus into Impactia is monthly done. One of the main issues that we found during the development of Impactia was the need of dealing with duplicated documents obtained from different sources. Taking into account that sometimes titles might be written differently, with slashes, comas, and so on, Impactia detects the duplicates using the field ‘DOI’ if it is available or comparing the fields: page start, page end and ISSN. Therefore it is possible to guarantee the absence of duplicates. Results The data gathered in Impactia becomes available to the administrative teams and hospitals managers, through an easy web page that allows them to know at any moment, and with just one click, the detailed information of the scientific output of their hospitals, including useful graphs such as percentage of document types, journals where their scientists usually publish, annual comparatives, bibliometric indicators and so on. They can also compare the different centres of the SSPA. Impactia allows the user to download the data from the application, so that he can work with this information or include them in their centres’ reports. This application saves the health system many working hours. It was previously done manually by forty one librarians, while now it is done by only one person in the BV-SSPA during two days a month. To sum up, the benefits of Impactia are: It has shown its effectiveness in the automatic classification, treatment and analysis of the data. It has become an essential tool for all managers to evaluate quickly and easily the scientific production of their centers. It optimizes the human resources of the SSPA, saving time and money. It is the reference point for the Department of R+D+i to do the scientific health staff evaluation.

The sustainability of a Spanish Regional Virtual Library

Objectives: The Andalusian Health e-Library (BV-SSPA) is the National Health Library in the region of Andalusia (Spain). It is a corporate hospital library created in 2006. The year 2012 is a turning point for the Spanish economy, and the BV-SSPA has to demonstrate that it is cost-effective and sustainable. Methods: Andalusia is a wide Spanish region with more than 8 million inhabitants, more than 100,000 health professionals for 41 hospitals, 1,500 primary health care centers, and 28 centers for nonmedical attention purposes, and the BV-SSPA was created to cover all these health services. It was appointed the only intermediary for contracting electronic resources destined to the Andalusian Health System. Hospitals are not allowed to subscribe any resources, and the same services are offered for the whole system. Results: In 2011, the BV-SSPA reached the biggest electronic health sciences resource collection in Spain: a total amount of 2,431 subscribed titles, besides 8 databases and other scientific information resources. The following goals were also achieved: • Cost-effectiveness: In 2011, the BV-SSPA represented a saving percentage of 25.42% compared to the individual hospital subscription costs if they would have continued their contracting. • Efficiency: Central purchasing has meant for the Andalusian health professionals, the democracy of research resource access. Some services were also created: • integrated and safe remote access to all the library resources independent of the user’s location • citizenship website, where the resources for citizenship are grouped • Centralized Document Supply Service, focusing all the article orders from and for the Andalusian Health System • institutional repository, which contains the whole intellectual, scientific production generated by the Andalusian health professionals • computer application to study the Andalusian health system scientific production • Social media as instrument for communicating with users • science web, a defined space for researchers. Conclusions: Although Andalusia is facing a dreadful economic situation, the BV-SSPA has demonstrated its sustainability: • For 2012 renewals, it carried out a statistics study allowing obtaining enough data for deciding which titles were not being discharged by users. • Titles with no discharges or without impact factor were rejected after strong negotiation with suppliers, as the BV-SSPA after 6 years on, is considered a strong dealer by them. • This meant savings of 14% from the original budget for 2012, which allowed the continuity of the BV-SSPA without decreasing the quality offered to their users.

How to manage a virtual library?

Introduction. The Andalusian Public Health System Virtual Library (Biblioteca Virtual del Sistema Sanitario Público de Andalucía, BV-SSPA) was created in June 2006, after being determined by the II Quality Plan in the key process Guarantee the Knowledge Exchange into the Health System which was established by the Strategy IV, Knowledge Management, 2005-2008. It is a government strategy with its own budget and management with the aim of rationalizing the subscriptions into the Andalusian Health System and democratizing the health professional access to qualify scientific information, regardless of the professional workplace. Andalusia is a wide region with more than 8 million inhabitants, more than 90,000 health professionals for 41 hospitals, 1,500 primary healthcare centres, and 12 centres for non-medical attention purposes, and the Virtual Library was created to cover all this Health Services. Before the creation of the BV-SSPA every centre had its own budget and management decisions concerning scientific resources, with the creation of the BV-SSPA both management and budget were centralized. Objectives. With this work we pretend to analyze if the results after these five years have reached the expectations from an economic point of view and determine if really we can offer a benefit to the Andalusian Professional and Society in general. We will demonstrate the following: - The BV-SSPA supposed a cost reduction. It meant cost-effectiveness. - It resulted in Economics of Scale, as we have every year more resources and services investing a minor proportional amount of money. - In terms of Efficiency it implemented more services than the System had before its creation, we a lower budget. Methods. The BV-SSPA was appointed the only intermediary for contracting electronic resources destined to the Andalusian Health System. This had some consequences which should be analyzed: - Hospitals were not allowed to subscribe any resources. - Services offered for the whole System. - A remote access system was created. - Tools to give more visibility to the Public Health System were developed. - Negotiations techniques changed as the BV-SSPA is stronger than individual hospitals. Results. - The amount of 2,431 electronic reviews, 8 data bases and other scientific information resources at the disposal of the Andalusian Health System Professionals and available worldwide requiring only an internet connection. Before the BV-SSPA, 5,267 titles were subscribed by hospital and 2,967 of them were subscribed repeatedly (by two or more hospitals), this represented more than 55%. The rationalization of the subscription investment has been reached. - The establishment of several important scientific services for the whole territory of Andalusia, not only big hospitals. - The use of appropriate tools through a Web 2.0 and Social Media to be acknowledged by most National Health Professionals. Conclusions. It has been demonstrated that the BV-SSPA has become the Central Unit for purchasing, offering librarian services and a reference for users in terms of knowledge management, but from the point of view of business it has also obtained the following results: - Cost-Effectiveness: Its budget for subscriptions is lower than the hospital former one in a 30% and now more electronic resources are available. - Economics of Scale: Near 95,000 health professionals can access this Virtual Library in 2010. Before its creation Professionals for small hospital and Primary Care centres were not able to access to scientific information subscribed by big hospitals. - Efficiency Besides the central electronic purchasing, services were created for the System, without increasing the expenses: - Remote access to all the library resources independent of the user’s location. The BV-SSPA usage increased in a 147% in 2008, when it was installed. - The Document Supply Service implemented in 2009. - The Institutional Repository which contains the whole intellectual, scientific production generated by the Andalusian Public Health Professionals as a result of their healthcare, research or managing activity. - The creation of an application developed by the BV-SSPA to study the Andalusian Health System Scientific Production. - The visibility of the Andalusian Health System reached thanks to the BV-SSPA, through the numerous events in which it participates and organizes such as the 2nd. European National Digital Libraries of Health Conferences and the National Conference of Health Science Information and Documentation held in Cadiz in 2010; and its profile in social media where it can be contacted by citizens and health professionals all over the world. - Negotiation with electronic resource suppliers is much more advantageous as the BV-SSPA is stronger to deal with them thanks to its consolidated budget, its managing independence and its visibility.