Study of stress Relief Patterns In Diamond-Like Carbon-Films

An optical microscopy study of stress relief patterns in diamondlike carbon films is presented. Interesting stress relief patterns are observed which include the well known sinusoidal type, branching pattern and string of beads pattern. The last one is shown to relieve stresses under marginal conditions. Two new stress relief patterns are noted in the present study. One of them is of a sinusoidal shape with two extra branches at every peak position. The distribution of different stress relief forms from the outer edge of the films towards the interior is markedly dependent on film thickness. Our new patterns support the approach in which the stress relief forms have been analysed earlier using the theory of plate buckling.

Comparison and combination of several stress relief methods for cubic boron nitride films deposited by ion beam assisted deposition

Cubic boron nitride (c-BN) films were prepared by ion beam assisted deposition (IBAD) technique, and the stresses were primary estimated by measuring the frequency shifts in the infrared-absorption peaks of c-BN samples. To test the possible effects of other factors, dependencies of the c-BN transversal optical mode position on film thickness and c-BN content were investigated. Several methods for reducing the stress of c-BN films including annealing, high temperature deposition, two-stage process, and the addition of a small amount of Si were studied, in which the c-BN films with similar thickness and cubic phase content were used to evaluate the effects of the various stress relief methods. It was shown that all the methods can reduce the stress in c-BN films to various extents. Especially, the incorporation of a small amount of Si (2.3 at.%) can result in a remarkable stress relief from 8.4 to similar to 3.6 GPa whereas the c-BN content is nearly unaffected, although a slight degradation of the c-BN crystallinity is observed. The stress can be further reduced down below I GPa by combination of the addition of Si with the two-stage deposition process. (c) 2008 Elsevier B.V. All rights reserved.

Interactive interface for stress relief

Every time more we hear in our everyday statements like "I'm stressed!", "Don´t worry me more than I am." But in what sense can we use technology to combat these congestions that we deal with daily? Well, one way would be to use technology to create objects, systems or applications that can spoil us and preferably be imperceptible by the user and, for this we have the ubiquitous computing and nurturant technologies. The ubiquitous computing is increasingly discussed as well as ways to make your computer more subtle in the view of the user, which is subject of research and development. The use of technology as a source of relaxation and spoil us is a strand that is being explored in the context of nurturant technologies. Accordingly, this thesis is focused on the development of an object and several applications with which we can interact. The object and applications have the purpose to spoil us and help us relax after a long day at work or in some situation more stressful. The object developed employs technologies like the use of accelerometers and the applications developed employs communications between computers and Web cameras. This thesis begins with a brief introduction to the areas of research and others that we can include in this thesis, such as ubiquitous computing and the nurturant technologies, providing yet general information on stress and ways to mitigate it. Later is described some of the work already done and that influenced this thesis as well as the prototypes developed and the experiences performed, ending with a general conclusion and future work.

Effects of cryogenic and stress relief treatments on temper carbide precipitation in AISI D2 tool steel

The effects of cryogenic and stress relief treatments on temper carbide precipitation in the cold work tool steel AISI D2 were studied. For the cryogenic treatment the temperature was −196°C and the holding time was 2, 24 or 30 h. The stress relief heat treatment was carried at 130°C/90 min, when applied. All specimens were compared to a standard thermal cycle. Specimens were studied using metallographic characterisation, X-ray diffraction and thermoelectric power measurements. The metallographic characterisation used SEM (scanning electron microscopy) and SEM-FEG (SEM with field emission gun), besides OM (optical microscopy). No variation in the secondary carbides (micrometre sized) precipitation was found. The temper secondary carbides (nanosized) were found to be more finely dispersed in the matrix of the specimens with cryogenic treatment and without stress relief. The refinement of the temper secondary carbides was attributed to a possible in situ carbide precipitation during tempering.

Estudo do alívio das tensões residuais, em peça estampada, pela técnica de vibrações mecânicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Stress reduction and bond stability during thermal annealing of tetrahedral amorphous carbon

A comprehensive study of the stress release and structural changes caused by postdeposition thermal annealing of tetrahedral amorphous carbon (ta-C) on Si has been carried out. Complete stress relief occurs at 600-700°C and is accompanied by minimal structural modifications, as indicated by electron energy loss spectroscopy, Raman spectroscopy, and optical gap measurements. Further annealing in vacuum converts sp3 sites to sp2 with a drastic change occurring after 1100°C. The field emitting behavior is substantially retained up to the complete stress relief, confirming that ta-C is a robust emitting material. © 1999 American Institute of Physics.

Measurements Of In Situ Stress And Mining-Induced Stress In Beiminghe Iron Mine Of China

In order to obtain the distribution rules of in situ stress and mining-induced stress of Beiminghe Iron Mine, the stress relief method by overcoring was used to measure the in situ stress, and the MC type bore-hole stress gauge was adopted to measure the mining-induced stress. In the in situ stress measuring, the technique of improved hollow inclusion cells was adopted, which can realize complete temperature compensation. Based on the measuring results, the distribution model of in situ stress was established and analyzed. The in situ stress measuring result shows that the maximum horizontal stress is 1.75-2.45 times of vertical stress and almost 1.83 times of the minimum horizontal stress in this mineral field. And the mining-induced stress measuring result shows that, according to the magnitude of front abutment pressure the stress region can be separated into stress-relaxed area, stress-concentrated area and initial stress area. At the -50 m mining level of this mine, the range of stress-relaxed area is 0-3 m before mining face; the range of stress-concentrated area is 3-55 m before mining face, and the maximum mining-induced stress is 16.5-17.5 MPa, which is 15-20 m from the mining face. The coefficient of stress concentration is 1.85.

Effects of stress relaxation in beta-titanium orthodontic loops

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos da vibração simultânea nas propriedades mecânicas de juntas de aço ASTM A131 soldadas pelo processo arame tubular (FCAW)

Pós-graduação em Engenharia Mecânica - FEG

Application of acoustoelasticity to measure the stress generated by milling in ASTM A36 steel plates

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Physiological responses to water stress in Eucalyptus cloeziana and E-argophloia seedlings

Effects of water stress duration and intensity on gas exchange and leaf water potential were investigated in 7-month-old seedlings of a humid coastal provenance (Gympie) and a dry inland (Hungry Hills) provenance of E. cloeziana F. Muell. and in a dry inland (Chinchilla) provenance of E. argophloia Blakely supplied with 100% (T-100), 70% (T-70), 50% (T-50) of their water requirements, or were watered only after they were wilted at dawn (T-0). Seedlings of E. argophloia had the highest midday net photosynthetic rate (A), stomata] conductance (g(s)), stomatal density and predawn leaf water potential (Psi(pd)) in all treatments. The E. cloeziana provenances did not differ in these attributes. The T-70 and T-50 treatments caused reductions in A of 30% in E. argophloia, and 55% in the E. cloeziana provenances. Under the T-0 treatment, E. argophloia maintained higher rates of gas exchange at all levels of water stress than E. cloeziana provenances. The estimates of Psi(pd) and midday water potential (Psi(md)) at which plants remained wilted overnight were respectively: -2.7 and -4.1 MPa for E. cloeziana (humid), -2.8 and -4.0 MPa for E. cloeziana (dry) and, -3.7 and -4.9 MPa for E. argophloia. Following stress relief, both A and g(s) recovered more quickly in E. argophloia and in the dry provenance of E. cloeziana than in the humid provenance. We conclude that E. argophloia is more drought tolerant and has a potential for cultivation in the humid and semi humid climates, whilst E. cloeziana has greater potential in the humid subtropical climates.

The Culture of Older Women’s Drinking in Australia

The purpose of this investigation was to undertake pilot research to develop an understanding of the current culture of older Australian women’s (35-50 years) drinking behaviour from a uniquely female perspective. Methods Two separate focus group interviews were undertaken with women (N = 11) aged between 35 and 50 years living in South-East Queensland, Australia. Women were asked to openly discuss how and why they drink alcohol (ie., their regular drinking behaviour), how this has changed over time, and the attitudes and values that influence their behaviour. Results Participants reported that their consumption of alcohol was more regulated and controlled and although some women drank more frequently, the quantity consumed at each drinking occasion had decreased significantly. Occasional consumption of large amounts of alcohol tended to be the result of ‘incidental drinking’ as opposed to ‘determined drinking’. The reasons for alcohol consumption were found to be internal as well as social. Internal reasons included stress relief, increased relaxation and self reward. Further, alcohol was used as a social lubricant. This cohort also reported being influenced by the drinking patterns of their partners. Social group matching was however found to have a negative impact on alcohol consumption as social groups most commonly endorsed lesser levels of intoxication. Further, the women reported that they were of an age in which they felt excessive drinking to be ‘undignified’. Personal reasons such as vocational and family responsibilities further modified the levels of consumption for individual women. Finally, it was reported that perceived health risks that can result from excessive and/or repetitive drinking led to a decreased in consumption. Conclusion It is proposed that the findings of this investigation could be used to improve current knowledge regarding more mature women’s drinking culture, associated risks and risk prevention strategies.

Exploring female university students' beliefs about binge eating

Binge eating (BE) among female university students is rising in prevalence and few studies have considered the role of social cognitive processes in decisions to engage in BE. This study adopted a theory of planned behavior (TPB) belief-based approach to examine the beliefs that underpin female university students' intentions to BE. Participants (N = 250) completed self-report questionnaires assessing BE intentions and the TPB behavioral (advantages and disadvantages of BE), normative (important others approving/disapproving of BE), and control (barriers toward and motivators for BE) belief measures. For analyses, participants were grouped based on a median split of the overall intention score into those with higher and lower intentions to binge eat. Differences in the TPB beliefs about BE between these two groups were then assessed. Female students with higher intentions to binge eat differed significantly in their endorsement of the likely beliefs related to BE, compared to female students with lower intentions to binge eat. The results suggest that interventions to decrease BE in the female student population should reduce the associated advantages (e.g., stress relief and feelings of comfort), enhance perceptions of disapproval for BE from important others (e.g., partner and friends), provide education about the health implications to strengthen the perceived barriers discouraging BE, and suggest healthy alternatives to overcome the factors (e.g., being alone and boredom) motivating BE

Use of ecological information in urban planning

Urbanization leads to irreversible land-use change, which has ecological consequences such as the loss and fragmentation of green areas, and structural and functional changes in terrestrial and aquatic ecosystems. These consequences diminish ecosystem services important for human populations living in urban areas. All this results in a conflict situation: how to simultaneously meet the needs of city growth and the principles of sustainable development, and especially conserve important green areas within and around built-up areas? Urban planners and decisionmakers have an important role in this, since they must use the ecological information mainly from species and biotope inventories and biodiversity impact assessments in determining the conservation values of green areas. The main aim of this thesis was to study the use of ecological information in the urban land-use planning and decisionmaking process in the Helsinki Metropolitan Area, Finland. At first, the literature on ecological-social systems linkages related to urban planning was reviewed. Based on the review, a theoretical and conceptual framework for the research on Finnish urban setting was adapted. Secondly, factors determining the importance and effectiveness of incorporation of ecological information into the urban planning process, and the challenges related to the use of ecological information were studied. Thirdly, the importance and use of Local Ecological Knowledge in urban planning were investigated. Then, factors determining the consideration of urban green areas and related ecological information in political land-use decisionmaking were studied. Finally, in a case study illustrating the above considerations, the importance of urban stream ecosystems in the land-use planning was investigated. This thesis demonstrated that although there are several challenges in using ecological information effectively, it is considered as an increasingly important part of the basic information used in urban planning and decisionmaking process. The basic determinants for this are the recent changes in environmental legislation, but also the increasing appreciation of green areas and their conservation values by all the stakeholders. In addition, Local Ecological Knowledge in its several forms can be a source of ecological information for planners if incorporated effectively into the process. This study also showed that rare or endangered species and biotopes, and related ecological information receive priority in the urban planning process and usually pass through the decisionmaking system. Furthermore, the stream Rekolanoja case indicates that planners and residents see the value of urban stream ecosystem as increasingly important for the local health and social values, such as recreation and stress relief.

Unconventional mechanism of stabilization of a tetragonal phase in the perovskite ferroelectric (PbTiO3)(1-x)(BiFeO3)(x)

Temperature-dependent x-ray powder-diffraction study of the tetragonal compositions of PbTiO3-BiFeO3 series has revealed that, unlike for all the known ferroelectric perovskites, the compositions exhibiting giant tetragonality is stabilized from the cubic phase via a complex transition pathway which involve (i) formation of minor monoclinic phase with a large pseudotetragonality along with an intermediate tetragonal phase (major) with a small tetragonality, (ii) gradual vanishing of the intermediate tetragonal phase and concomitant increase in the monoclinic regions, and finally (iii) gradual transformation of the monoclinic phase to the tetragonal phase with giant tetragonality.The system seems to adopt such a complex transition pathway to create amicrostructure with very large number of domains and interfaces for stress relief, which would not have been possible in case of a direct cubic-tetragonal transition.