Influence of the Vertical Position of Maxillary Central Incisors on the Perception of Smile Esthetics Among Orthodontists and Laypersons

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

On the effects of welding parameters on weld quality of plasma arc keyhole welding of structural steels

The possibility and the usefulness of applying plasma keyhole welding to structural steels with different compositions and material thicknesses, and in various welding positions has been examinated. Single pass butt welding with I groove in flat, horizontal vertical and vertical positions and root welding with V , Y and U grooves of thick plate material in flat position have been studied and the welds with high quality has been obtained. The technological conditions for successful welding are presented. The single and interactive effects of welding parameters on weld quality, especially on surface weld defects, geometrical form errors, internal defects and mechanical properties (strength, ductility, impact toughness, hardness and bendability) of weld joint, are presented. Welding parameter combinations providing the best quality welds are also presented.

Manutenção da umidade do substrato durante o teste de germinação de Brachiaria brizantha

Para avaliar procedimentos para a manutenção da umidade do substrato durante o teste de germinação de Brachiaria brizantha. Estudou-se o efeito da posição das caixas plásticas na câmara de germinação sobre a perda de água semanal, testando-se nove posições verticais (bandejas) e três posições horizontais (porta, meio e fundo do germinador). Foi também avaliado o efeito de procedimentos para manter a umidade do substrato, sobre a germinação, a perda de água semanal e o tempo despendido para a instalação do teste. Os procedimentos testados foram: (a) vedação da caixa plástica com vaselina, (b) vedação com saco plástico dobrado em quatro e colocado entre a tampa e a caixa, (c) colocação da caixa tampada dentro de saco plástico, (d) espuma sob o papel de germinação e (e) testemunha, caixa apenas tampada. Concluiu-se que a câmara de germinação promove a desidratação desigual do substrato conforme a posição das caixas; aquelas localizadas na primeira bandeja superior são as mais prejudicadas. Entre os procedimentos, a vedação com vaselina, a colocação da caixa dentro de saco plástico e a vedação com saco plástico dobrado em quatro entre a tampa e a caixa são eficientes na manutenção da umidade do substrato em taxas que não alteram os resultados do teste de germinação de B. brizantha; os dois últimos procedimentos são os mais rápidos e práticos, adaptando-se à rotina de um laboratório de análise de sementes.

The accuracy potential of Galileo E5/E1 pseudoranges for surveying and mapping

In the paper we discuss the potential of the new Galileo signals for pseudorange based surveying and mapping in open areas under optimal reception conditions (open sky scenarios) and suboptimal ones (multipath created by moderate to thick tree coverage). The paper reviews the main features of the Galileo E5 AltBOC and E1 CBOC signals; describes the simulation strategy, models and algorithms to generate realistic E5 and E1 pseudoranges with and without multipath sources; describes the ionosphere modeling strategy, models and algorithms and discusses and presents the expected positioning accuracy and precision results. According to the simulations performed, pseudoranges can be extracted from the Galileo E5 AltBOC signals with tracking errors (1-σ level) ranging from 0.02 m (open sky scenarios) to 0.08 m (tree covered scenarios) whereas for the Galileo E1 CBOC signals the tracking errors range between 0.25 m to 2.00 m respectively. With these tracking errors and with the explicit estimation of the ionosphere parameters, simulations indicate real-time open sky cm-level horizontal positioning precisions and dm-level vertical ones and dm-level accuracies for both the horizontal and vertical position components.

Esterilização de fresas carbide em fornos de micro-ondas domésticos. Efeito da capacidade. da potência, do meio da imersão, da quantidade e posição da amostra sobre o tempo de esposição

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sea ice measurements during POLARSTERN cruise ANT-XXIII/7 (Winter Weddell Outflow Study)

Various physical properties of snow and sea ice were measured during ice stations in the Western Weddell Sea, Antarctic, during the POLARSTERN cruise ANT-XXIII/7 (WWOS) in 2006. Most stations were reached via a gangway directly from the vessels others by helicopter. All vertical positions are corrected to freeboard, e.g. z=0 represents the snow-ice interface. More detailed information about the data sets and methods are available from the cruise report (section 4 sea-ice physics).

Mover para melhor nascer: liberdade de movimentos e posições verticais no primeiro estádio do trabalho de parto

A Organização Mundial de Saúde destaca a deambulação e a adoção de posições verticais pela parturiente, como práticas demonstradamente benéficas, devendo ser estimuladas pela enfermeira obstetra na condução do trabalho de parto e parto normal, em situações de baixo risco obstétrico. O projeto preconizou a promoção da deambulação e o incentivo à adoção de posições verticais na fase ativa do trabalho de parto. As intervenções de enfermagem na promoção destas práticas foram avaliadas na equipa de enfermeiros obstetras do Serviço de Urgência Obstétrica e Ginecológica do Centro Hospitalar Barreiro-Montijo, Entidade Pública Empresarial e num grupo de parturientes, através da aplicação de questionários. As necessidades dos enfermeiros obstetras e das parturientes determinaram a realização de ações formativas e educacionais e a elaboração de materiais informativos de suporte à prática assistencial. A avaliação do projeto demonstrou que ainda existem práticas a serem melhoradas, sendo a sua continuidade vantajosa para profissionais e parturientes; ABSTRACT: TITLE: Move to Better Birth - Freedom of Movement and Upright Positions in First Stage of Labor. The World Health Organization highlights ambulation and adoption of vertical position by the woman, as demonstrated beneficial practices and should be encouraged by obstetric nurses in the conduct of obstetric labor and normal delivery, in low risk situations. The project advocated for the promotion of ambulation and encouragement for the adoption of vertical positions in the active phase of labor. Nursing interventions to promote these practices were evaluated in the obstetric nurses team of Obstetric and Gynecological Emergency Department from Hospital Center Barreiro-Montijo, Business Public Entity, and in a group of women in labor, through the use of questionnaires. The needs of obstetric nurses and women in labor determined the realization of training and educacional activities and the development of information materials to support the care practice. The project evaluation demonstrates that there are still practices to be improved, and its continuity being advantageous for professionals and women in labor.

Understanding the vertical equity judgements underpinning health inequality measures

The choice of income-related health inequality measures in comparative studies is often determined by custom and analytical concerns, without much explicit consideration of the vertical equity judgements underlying alternative measures. This note employs an inequality map to illustrate how it these judgements that affect the ranking of populations by health inequality. In particular, it is shown that relative indices of inequality in health attainments and shortfalls embody distinct vertical equity judgments, where each may represent ethically defensible positions in specific contexts. Further research is needed to explore people’s preferences over distributions of income and health.

Análise das forças de reação vertical do solo em função das variações dos centros de massa de indivíduos a partir de movimentos de tronco com variação de carga

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vertical variation in autumn leaf phenology of Fagus sylvatica L. in southern Germany

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

(Table 1) Positions of the Mesocena elliptica zone in sediment cores from the Pacific and Indian Oceans

The Mesocena elliptica Ehr. zone in deep-sea sediments of the Pacific Ocean is characterized by a short vertical range at the base of the Pleistocene section. Depending on sedimentation rate this zone lies at various depths below the ocean bottom. M. elliptica is unknown in recent oceanic plankton. In fossil state known species indicate that sediments containing them are of Oligocene-Miocene age. New data obtained in early 1960's show that within a short interval, evidently in Early Pleistocene, M. elliptica was abundant in plankton, primarily in tropical regions. Correlation of paleomagnetic data with results of diatom analysis shows that the Mesocena elliptica zone always lies above the Pliocene-Pleistocene boundary, and that maximum contents of M. elliptica coincide with the Jaramillo event (0.85-0.95 million years ago).

(Table 1) Positions of the Mesocena elliptica zone in sediment cores from the Pacific and Indian Oceans

The Mesocena elliptica Ehr. zone in deep-sea sediments of the Pacific Ocean is characterized by a short vertical range at the base of the Pleistocene section. Depending on sedimentation rate this zone lies at various depths below the ocean bottom. M. elliptica is unknown in recent oceanic plankton. In fossil state known species indicate that sediments containing them are of Oligocene-Miocene age. New data obtained in early 1960's show that within a short interval, evidently in Early Pleistocene, M. elliptica was abundant in plankton, primarily in tropical regions. Correlation of paleomagnetic data with results of diatom analysis shows that the Mesocena elliptica zone always lies above the Pliocene-Pleistocene boundary, and that maximum contents of M. elliptica coincide with the Jaramillo event (0.85-0.95 million years ago).

The Inadequacy Of The Y-axis Of Growth (sngn) For The Vertical Pattern Assessment In Patients With Sagittal Discrepancies.

The aim of this cephalometric study was to evaluate the influence of the sagittal skeletal pattern on the 'Y-axis of growth' measurement in patients with different malocclusions. Lateral head films from 59 patients (mean age 16y 7m, ranging from 11 to 25 years) were selected after a subjective analysis of 1630 cases. Sample was grouped as follows: Group 1 - class I facial pattern; group 2 - class II facial pattern; and Group 3 - class III facial pattern. Two angular measurements, SNGoGn and SNGn, were taken in order to determine skeletal vertical facial pattern. A logistic regression with errors distributed according to a binomial distribution was used to test the influence of the sagittal relationship (Class I, II, III facial patterns) on vertical diagnostic measurement congruence (SNGoGn and SNGn). RESULTS show that the probability of congruence between the patterns SNGn and SNGoGn was relatively high (70%) for group 1, but for groups II (46%) and III (37%) this congruence was relatively low. The use of SNGn appears to be inappropriate to determine the vertical facial skeletal pattern of patients, due to Gn point shifting throughout sagittal discrepancies. Clinical Significance: Facial pattern determined by SNGn must be considered carefully, especially when severe sagittal discrepancies are present.

Vertical Bone Measurements From Cone Beam Computed Tomography Images Using Different Software Packages.

This article aimed at comparing the accuracy of linear measurement tools of different commercial software packages. Eight fully edentulous dry mandibles were selected for this study. Incisor, canine, premolar, first molar and second molar regions were selected. Cone beam computed tomography (CBCT) images were obtained with i-CAT Next Generation. Linear bone measurements were performed by one observer on the cross-sectional images using three different software packages: XoranCat®, OnDemand3D® and KDIS3D®, all able to assess DICOM images. In addition, 25% of the sample was reevaluated for the purpose of reproducibility. The mandibles were sectioned to obtain the gold standard for each region. Intraclass coefficients (ICC) were calculated to examine the agreement between the two periods of evaluation; the one-way analysis of variance performed with the post-hoc Dunnett test was used to compare each of the software-derived measurements with the gold standard. The ICC values were excellent for all software packages. The least difference between the software-derived measurements and the gold standard was obtained with the OnDemand3D and KDIS3D (-0.11 and -0.14 mm, respectively), and the greatest, with the XoranCAT (+0.25 mm). However, there was no statistical significant difference between the measurements obtained with the different software packages and the gold standard (p> 0.05). In conclusion, linear bone measurements were not influenced by the software package used to reconstruct the image from CBCT DICOM data.

Sistema de análise de movimento para avaliação da postura vertical durante a corrida no teste de esforço máximo incremental

Universidade Estadual de Campinas . Faculdade de Educação Física