Cooperative data scheduling in hybrid vehicular ad hoc networks: VANET as a software defined network

This paper presents the first study on scheduling for cooperative data dissemination in a hybrid infrastructure-to-vehicle (I2V) and vehicle-to-vehicle (V2V) communication environment. We formulate the novel problem of cooperative data scheduling (CDS). Each vehicle informs the road-side unit (RSU) the list of its current neighboring vehicles and the identifiers of the retrieved and newly requested data. The RSU then selects sender and receiver vehicles and corresponding data for V2V communication, while it simultaneously broadcasts a data item to vehicles that are instructed to tune into the I2V channel. The goal is to maximize the number of vehicles that retrieve their requested data. We prove that CDS is NP-hard by constructing a polynomial-time reduction from the Maximum Weighted Independent Set (MWIS) problem. Scheduling decisions are made by transforming CDS to MWIS and using a greedy method to approximately solve MWIS. We build a simulation model based on realistic traffic and communication characteristics and demonstrate the superiority and scalability of the proposed solution. The proposed model and solution, which are based on the centralized scheduler at the RSU, represent the first known vehicular ad hoc network (VANET) implementation of software defined network (SDN) concept.

An efficient public key management regime for vehicular ad hoc networks (VANETS)

The primary goal of the Vehicular Ad Hoc Network (VANET) is to provide real-time safety-related messages to motorists to enhance road safety. Accessing and disseminating safety-related information through the use of wireless communications technology in VANETs should be secured, as motorists may make critical decisions in dealing with an emergency situation based on the received information. If security concerns are not addressed in developing VANET systems, an adversary can tamper with, or suppress, the unprotected message to mislead motorists to cause traffic accidents and hazards. Current research on secure messaging in VANETs focuses on employing the certificate-based Public Key Infrastructure (PKI) scheme to support message encryption and digital signing. The security overhead of such a scheme, however, creates a transmission delay and introduces a time-consuming verification process to VANET communications. This thesis has proposed a novel public key verification and management approach for VANETs; namely, the Public Key Registry (PKR) regime. Compared to the VANET PKI scheme, this new approach can satisfy necessary security requirements with improved performance and scalability, and at a lower cost by reducing the security overheads of message transmission and eliminating digital certificate deployment and maintenance issues. The proposed PKR regime consists of the required infrastructure components, rules for public key management and verification, and a set of interactions and associated behaviours to meet these rule requirements. This is achieved through a system design as a logic process model with functional specifications. The PKR regime can be used as development guidelines for conforming implementations. An analysis and evaluation of the proposed PKR regime includes security features assessment, analysis of the security overhead of message transmission, transmission latency, processing latency, and scalability of the proposed PKR regime. Compared to certificate-based PKI approaches, the proposed PKR regime can maintain the necessary security requirements, significantly reduce the security overhead by approximately 70%, and improve the performance by 98%. Meanwhile, the result of the scalability evaluation shows that the latency of employing the proposed PKR regime stays much lower at approximately 15 milliseconds, whether operating in a huge or small environment. It is therefore believed that this research will create a new dimension to the provision of secure messaging services in VANETs.

QoS Performance Analysis of Routing Protocols in Vehicular Ad-hoc Networks

Vehicular Ad-hoc Networks (VANET), is a type of wireless ad-hoc network that aims to provide communication among vehicles. A key characteristic of VANETs is the very high mobility of nodes that result in a frequently changing topology along with the frequent breakage and linkage of the paths among the nodes involved. These characteristics make the Quality of Service (QoS) requirements in VANET a challenging issue. In this paper we characterize the performance available to applications in infrastructureless VANETs in terms of path holding time, path breakage probability and per session throughput as a function of various vehicle densities on road, data traffic rate and number of connections formed among vehicles by making use of table-driven and on-demand routing algorithms. Several QoS constraints in the applications of infrastructureless VANETs are observed in the results obtained.

Cooperation using a robotic ad hoc network made from Bluetooth, JXTA, OSGi and other commercial off the shelf (COTS) products

Abstract - Mobile devices in the near future will need to collaborate to fulfill their function. Collaboration will be done by communication. We use a real world example of robotic soccer to come up with the necessary structures required for robotic communication. A review of related work is done and it is found no examples come close to providing a RANET. The robotic ad hoc network (RANET) we suggest uses existing structures pulled from the areas of wireless networks, peer to peer and software life-cycle management. Gaps are found in the existing structures so we describe how to extend some structures to satisfy the design. The RANET design supports robot cooperation by exchanging messages, discovering needed skills that other robots on the network may possess and the transfer of these skills. The network is built on top of a Bluetooth wireless network and uses JXTA to communicate and transfer skills. OSGi bundles form the skills that can be transferred. To test the nal design a reference implementation is done. Deficiencies in some third party software is found, specifically JXTA and JamVM and GNU Classpath. Lastly we look at how to fix the deciencies by porting the JXTA C implementation to the target robotic platform and potentially eliminating the TCP/IP layer, using UDP instead of TCP or using an adaptive TCP/IP stack. We also propose a future areas of investigation; how to seed the configuration for the Personal area network (PAN) Bluetooth protocol extension so a Bluetooth TCP/IP link is more quickly formed and using the STP to allow multi-hop messaging and transfer of skills.

An efficient public key management system : an application in vehicular ad hoc networks

The major purpose of Vehicular Ad Hoc Networks (VANETs) is to provide safety-related message access for motorists to react or make a life-critical decision for road safety enhancement. Accessing safety-related information through the use of VANET communications, therefore, must be protected, as motorists may make critical decisions in response to emergency situations in VANETs. If introducing security services into VANETs causes considerable transmission latency or processing delays, this would defeat the purpose of using VANETs to improve road safety. Current research in secure messaging for VANETs appears to focus on employing certificate-based Public Key Cryptosystem (PKC) to support security. The security overhead of such a scheme, however, creates a transmission delay and introduces a time-consuming verification process to VANET communications. This paper proposes an efficient public key management system for VANETs: the Public Key Registry (PKR) system. Not only does this paper demonstrate that the proposed PKR system can maintain security, but it also asserts that it can improve overall performance and scalability at a lower cost, compared to the certificate-based PKC scheme. It is believed that the proposed PKR system will create a new dimension to the key management and verification services for VANETs.

Security and Privacy in Vehicular Ad-Hoc Networks : Survey and the Road Ahead

Vehicular Ad-hoc Networks (VANETs) can make roads safer, cleaner, and smarter. It can offer a wide range of services, which can be safety and non-safety related. Many safety-related VANETs applications are real-time and mission critical, which would require strict guarantee of security and reliability. Even non-safety related multimedia applications, which will play an important role in the future, will require security support. Lack of such security and privacy in VANETs is one of the key hindrances to the wide spread implementations of it. An insecure and unreliable VANET can be more dangerous than the system without VANET support. So it is essential to make sure that “life-critical safety” information is secure enough to rely on. Securing the VANETs along with appropriate protection of the privacy drivers or vehicle owners is a very challenging task. In this work we summarize the attacks, corresponding security requirements and challenges in VANETs. We also present the most popular generic security policies which are based on prevention as well detection methods. Many VANETs applications require system-wide security support rather than individual layer from the VANETs’ protocol stack. In this work we will review the existing works in the perspective of holistic approach of security. Finally, we will provide some possible future directions to achieve system-wide security as well as privacy-friendly security in VANETs.

Cooperative diversity for performance enhancement of vehicular ad hoc networks

This project was a step forward in introducing suitable cooperative diversity transmission techniques for vehicle to vehicle communications. The contributions are intended to aid in the successful implementation of future vehicular safety and autonomous controlling systems. Several protocols were introduced for vehicles to communicate effectively without losing connectivity. This study investigated novel protocols in terms of diversity-multiplexing trade-off and outage for a range of potential vehicular safety and infotainment applications.

Capacity Optimizing Hop Distance in a Mobile Ad Hoc Network with Power Control

In a dense multi-hop network of mobile nodes capable of applying adaptive power control, we consider the problem of finding the optimal hop distance that maximizes a certain throughput measure in bit-metres/sec, subject to average network power constraints. The mobility of nodes is restricted to a circular periphery area centered at the nominal location of nodes. We incorporate only randomly varying path-loss characteristics of channel gain due to the random motion of nodes, excluding any multi-path fading or shadowing effects. Computation of the throughput metric in such a scenario leads us to compute the probability density function of random distance between points in two circles. Using numerical analysis we discover that choosing the nearest node as next hop is not always optimal. Optimal throughput performance is also attained at non-trivial hop distances depending on the available average network power.

RamboNodes for the Metropolitan Ad Hoc Network

We present an algorithm to store data robustly in a large, geographically distributed network by means of localized regions of data storage that move in response to changing conditions. For example, data might migrate away from failures or toward regions of high demand. The PersistentNode algorithm provides this service robustly, but with limited safety guarantees. We use the RAMBO framework to transform PersistentNode into RamboNode, an algorithm that guarantees atomic consistency in exchange for increased cost and decreased liveness. In addition, a half-life analysis of RamboNode shows that it is robust against continuous low-rate failures. Finally, we provide experimental simulations for the algorithm on 2000 nodes, demonstrating how it services requests and examining how it responds to failures.

A performance comparison of three wireless multi hop ad-hoc network routing protocols when streaming MPEG4 traffic

Mobile ad-hoc networks are characterised by constant topology changes, the absence of fixed infrastructure and lack of any centralised control. Traditional routing algorithms prove to be inefficient in such a changing environment. Ad-hoc routing protocols such as dynamic source routing (DSR), ad-hoc on-demand distance vector routing (AODV) and destination-sequence distance vector (DSDV) have been proposed to solve the multi hop routing problem in ad-hoc networks. Performance studies of these routing protocols have assumed constant bit rate (CBR) traffic. Real-time multimedia traffic generated by video-on demand and teleconferencing services are mostly variable bit rate (VBR) traffic. Most of these multimedia traffic is encoded using the MPEG standard. (ISO moving picture expert group). When video traffic is transferred over MANETs a series of performance issues arise. In this paper we present a performance comparison of three ad-hoc routing protocols - DSR, AODV and DSDV when streaming MPEG4 traffic. Simulation studies show that DSDV performs better than AODV and DSR. However all three protocols fail to provide good performance in large, highly mobile network environments. Further study is required to improve the performance of these protocols in mobile ad-hoc networks offering VBR services.

Virtual backbone content routing in wireless ad-hoc network

We developed a new content routing based on the virtual backbone structure, which groups wireless nodes and contents into a virtual architecture. Our approach is scalable, works with local information, and does not rely on address information. The naming system uses flat naming to identify nodes and contents, and organizes these identifiers together. Backbone nodes can be selected automatically or predefined to direct their associated normal nodes in a local area. The normal nodes are guided by the backbone nodes to full fill the searching and routing processes. With a virtual structure, the searching performance can be improved by using the DHT technique.

Experiments using ns2 simulator demonstrate that this virtual backbone routing architecture has the following significances: workable without being aware address in a mobile situation; scalable with the size of network; efficient in terms of the reduced hop counts and short end-to-end delay, and also resistant to the dead-end problem.

Applying genetic algorithm for optimizing broadcasting process in ad-hoc network

Optimizing broadcasting process in mobile ad hoc network (MANET) is considered as a main challenge due to many problems, such as Broadcast Storm problem and high complexity in finding the optimal tree resulting in an NP-hard problem. Straight forward techniques like simple flooding give rise to Broadcast Storm problem with a high probability. In this work, genetic algorithm (GA) that searches over a population that represents a distinguishable ‘structure’ is adopted innovatively to suit MANETs. The novelty of the GA technique adopted here to provide the means to tackle this MANET problem lies mainly on the proposed method of searching for a structure of a suitable spanning tree that can be optimized, in order to meet the performance indices related to the broadcasting problem. In other words, the proposed genetic model (GM) evolves with the structure of random trees (individuals) ‘genetically’ generated using rules that are devised specifically to capture MANET behaviour in order to arrive at a minimal spanning tree that satisfies certain fitness function. Also, the model has the ability to give different solutions depending on the main factors specified such as, ‘time’ (or speed) in certain situations and ‘reachability’ in certain others.