Distribuição e formas de ocorrência de zinco em solos no município de Vazante - MG

A contaminação de solos é um problema atual que requer investigação detalhada no sentido de estabelecer critérios para a distinção entre anomalias naturais e contribuição antrópica. O trabalho foi desenvolvido com o objetivo de avaliar a distribuição e as formas de ocorrência de Zn para identificar a origem de valores anômalos em solos adjacentes a áreas de mineração no município de Vazante-MG. Foram coletadas amostras de perfis de solos em remanescentes sobre a área minerada e em posições a jusante e a montante desta, nas camadas de 0-2, 2-5, 5-10, 10-20, 20-50, 50-100, e 100-150 cm. Um estudo de extração seqüencial avaliou os teores de Zn nas formas: (a) solúvel; (b) trocável; (c) associada a carbonatos; (d) associada a óxidos amorfos; (e) associada a óxidos cristalinos; (f) associada à matéria orgânica; (g) residual; e (h) total. Verificou-se que os teores de Zn, de modo geral, são mais elevados nas áreas localizadas sobre a zona de mineralização, com solos mais jovens (Cambissolos e Neossolos), em relação aos solos mais intemperizados (Latossolos e Argissolos), localizados tanto a montante quanto a jusante da área minerada. Os teores totais foram muito altos. Mesmo considerando apenas as formas solúvel e trocável, mais lábeis, em alguns perfis os valores foram superiores aos teores totais encontrados naturalmente em solos. Verificou-se um padrão decrescente dos teores com a profundidade nos perfis localizados fora da área minerada. Por outro lado, os teores de Zn aumentaram com a profundidade em um Cambissolo localizado na área minerada. Não houve diferença significativa entre os teores de Zn das áreas a montante e a jusante em todas as formas químicas avaliadas, sugerindo que não se pode presumir efeito antrópico na dispersão do Zn em áreas adjacentes à zona de mineralização.

Valores de referência local e avaliação da contaminação por zinco em solos adjacentes a áreas mineradas no município de Vazante-MG

A contaminação dos solos por metais pesados é um problema atual que requer abordagem adequada, tendo em vista as necessidades da sociedade moderna. Em áreas de mineração, a avaliação da contaminação de solos constitui ferramenta importante para o gerenciamento de áreas degradadas. Este trabalho foi desenvolvido com o objetivo de estabelecer valores de referência local (VRL) para Zn em solos adjacentes a áreas mineradas no município de Vazante-MG, tendo em vista avaliar a contaminação ambiental. Foram coletadas amostras de perfis de solos remanescentes em área mineralizada, a jusante e montante dessa, nas profundidades de 0-2, 2-5, 5-10, 10-20, 20-50, 50-100 e 100-150 cm. Foram determinados os teores totais de Zn, bem como as formas disponíveis (Mehlich-3 e DTPA). Optou-se por determinar o VRL a partir da média ponderada dos teores de Zn nas camadas de 0 - 20 cm dos perfis a montante. De posse desse valor, calcularam-se o fator de contaminação (FC) e o índice de geoacumulação (IGeo) para cada perfil. O VRL obtido para Zn foi de 1.262 mg kg-1, que é muito alto em relação aos padrões de qualidade, sugerindo monitoramento e restrição ao uso agrícola e residencial dos solos na área. Não obstante, esse valor é inferior aos valores de intervenção (VI´s) para as áreas industriais adotados no Estado de São Paulo, EUA e Canadá. Os solos das áreas mineralizadas apresentaram maiores valores para o fator de contaminação, com destaque para o perfil 5 localizado na área mineralizada em exploração (área minerada). De acordo com o IGeo, os perfis de solo a jusante foram classificados como não poluídos a moderadamente poluídos.

Estudo da inflexão da Serra do Garrote e sua influência na zona de falha de Vazante (MG)

The Vazante Fault Zone (VFZ), located northwestward of Minas Gerais, host the largest zinc deposit known in the Brazilian territory. This structure is hosted in Vazante’s Group rocks, a metassedimentary sequence of marine environment. Near Vazante is situated the south end of the VFZ. To the west, occur the Serra do Garrote inflexion, characterized by a curvature in the contact of Formations Serra do Garrote and Serra do Poço Verde. This structure is through the analysis of aerial imagery of the region and represented in the published geological maps. The objective of this work is to understand what causes this inflexion and determine whether it affects the VZF, causing a shift in the same, and possibly, in the mineralization as well. To this end, it was done a mapping work in the region covering the Serra do Garrote inflexion and the south end of the VFZ, in 1:25.000 scale, supplemented by petrographic description of thin section and geologic sections, with cooperated to the understanding of the structural evolution of the region. Data analysis allowed the identification of six deformation phases. The D1 an D2 phases generated the main foliation. The D3 phase generate kink bands folds, with NS axis and vertical axial plane. The fourth phase is responsible for generating the Vazante Fault Zone. The fifth phase produces low angle folds and shear zones, subparallel to S1//S2. The last phase generates folds with NW axis and vertical axial plane, with causes the inflection of lithologic contactas. Field observations also make possible the conclusion that the Vazante Fault Zone presents a south continuation, which is affected by deformation associated to D6 phase attributing to the trace of the VFZ a curved geometry, similar to that exhibited by lithologic contacts between units of the map

Geologia da região da Fazenda Salobo, Vazante - MG

Important deposits of Zn-Pb associated with the Vazante Group, and Au in Group Canastra occur in the Vazante-Paracatu region (MG). They are located in the Brasília Fold Belt, which was generated from a convergent tectonic in the Brasiliano cycle, forming a complex system of imbricated nappes and faults. This study aims to characterize stratigraphic, structural and metamorphic aspects of an area, located in the Salobo’s farm region. A geological mapping in 1:20,000 scale was executed in order to identify the outcropping lithotypes and to collect structural measures. Drill holes were described to support the surface data and samples were selected for the preparation of thin and polished sections. In this context, the occurrence of rock types and hydrothermal processes that had not been previously described were found, for example layers of phosphatic quartzite in the Serra do Poço Verde Formation (SPV), hydrothermal hematites from martitization magnetite in contact by detachment of the Serra do Garrote Formation and SPV in the Vazante Group and layers of microbanded iron formations in Paracatu Formation (Canastra Group). In the area, four deformational phases were recognized, occurring progressively, in which two of them are related to convergent tectonic, with the development of thrust faults, one is associated to tectonic escape and/or reactivation of basement faults and the last has a distensive character, representing the post-convergence relaxation. The metamorphism in the area was subgreenschist facies, reaching lower greenschist, with temperatures up to 350°C

Determination of heavy metals and genotoxicity of water from an artesian well in the city of Vazante- MG, Brazil

The city of Vazante-MG is of great socioeconomic and environmental interest because it is the most important zinc producer district of Brazil. The mineral processing and geochemical processes may determine high concentrations of heavy metals in water intended for human consumption. Thus, the present study aimed to quantify and evaluate the heavy metal genotoxicity of artesian water in the city by Atomic absorption spectrophotometer analysis and testing with the Allium cepa test, respectively. This study reveals a chemical contamination in well water in the city, caused by the presence of heavy metals. Therefore, it can be considered that the high levels of heavy metals found in water samples are correlated with the genotoxic events observed in root cells of A. cepa.

Avaliação do potencial de utilização de espécies leguminosas, arbóreas e arbustivas, noduladas e micorrizadas, na revegetação de barragem de rejeitos da Companhia Mineira de Metais, Vazante, MG

O processo de beneficiamento do zinco, extraído em Vazante pela Companhia Mineira de Metais - CMM produz um rejeito alcalino e com baixa disponibilidade de nutrientes. Esta dissertação tem como objetivo avaliar o potencial de utilização de espécies leguminosas noduladas e micorrizadas na revegetação de barragem de rejeito da CMM. Neste sentido, foram instalados dois experimentos de campo onde foi realizado o plantio prévio de Brachiaria sp. O primeiro experimento foi composto por 36 tratamentos que foram formados por uma combinação de 17 espécies + 1 testemunha (ausência de plantas) na presença e na ausência de esterco de curral (2,0 L) na cova de plantio. Cada unidade experimental foi formada por 20 exemplares da mesma espécie que foram plantadas em covas abertas manualmente (25 x 25 x 25 cm) num espaçamento de 2 x 2 m. Todas as covas receberam a adubação básica formada por 125 g de superfosfato simples e 60 g de cloreto de potássio. Entre as 17 espécies avaliadas, 3 não pertencem a família Leguminosae e receberam, além da adubação básica, cerca de 25 g de sulfato de amônio por cobertura. O segundo experimento foi montado com o objetivo de avaliar o potencial de espécies leguminosas beneficiarem o estabelecimento e crescimento de espécies não leguminosas na revegetação de barragem de rejeito da CMM. Foram utilizadas três espécies leguminosas (Enterolobium scomburkii, Acacia mangium e Acacia holosericea) e três não leguminosas (Lithraea brasiliensis, Cinnamomum glaziovii e Eugenia jambolana) num esquema fatorial (3 x 3) + 1 testemunha, formando dez tratamentos distribuídos em blocos ao acaso com três repetições. Cada parcela foi formada por 20 plantas (10 leguminosas + 10 não leguminosas) plantadas em espaçamento 2 x 2 m e com a mesma adubação básica utilizada no primeiro experimento. Todas as espécies leguminosas utilizadas foram previamente inoculadas com estirpes selecionadas de bactérias fixadoras de Nitrogênio atmosférico e com uma mistura de fungos micorrízicos provenientes da Embrapa/Agrobiologia. Os experimentos foram avaliados quanto ao estabelecimento e crescimento de plantas (altura e diâmetro do colo) aos 4, 12 e 24 meses após o plantio. Os resultados obtidos permitem concluir que dentre as espécies avaliadas, as mais indicadas para a primeira etapa da revegetação da barragem de rejeito da CMM são: Acacia holosericea, Acacia farnesiana, Acacia auriculiformis, Mimosa caesalpiniifolia, Leucaena leucocephala, Mimosa birmucronata, Enterolobium schomburkii e Prosopis juliflora. O sucesso do consórcio de espécies leguminosas e não leguminosas depende da escolha das espécies a serem combinadas, de maneira que não exista uma efetiva competição por água, nutrientes e luz que possa prejudicar as espécies de menor plasticidade. Das combinações avaliadas, as de maiores potencialidades para o programa de revegetação das barragens de rejeito da CMM são aquelas envolvendo a espécieLithraea brasiliensis.

Sucessão estratigráfica e paleoambientes dos microbialitos proterozóicos do membro sumidouro, formação lagamar, grupo Vazante, na fazenda Sumaré, em Lagamar - MG

Microbialites (irregular agglutinated grains, laterally continuous mats and stromatolites) occur in small, nearly continuous outcrops over a ~60 m-thick carbonate interval of the Sumidouro Member, Lagamar Formation, Vazante Group, Meso-Neoproterozoic, on the Sumaré Farm, in Lagamar (MG, Southeastern Brazil). Diversified stromatolites formed under shallow, high energy conditions predominate and exhibit frequent lateral and vertical changes, including probable bioherm borders. In the lower part of the interval, coniform columnar stromatolites (Conophyton), representative of the deepest and/or calmest settings, are common. Higher up, narrow subcylindrical unbranched forms become abundant and may grade to forms with subparallel dichotomous or multiple divergent branches. The microbialites are apparently organized in shallowing upward cycles

Ritmo das chuvas na Bacia do Pardo (SP/MG): reflexos na vazão dos rios Pardo e Mogi-Guaçu

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Morpho-Anatomical Analysis of the Rhizome in Species of Scleria Berg. (Cyperaceae) from Serra do Cipó (MG)

Aspects related to the nature of stem thickening in monocotyledons have been the subject of many studies. Primary thickening has been attributed to the Primary Thickening Meristem (PTM). According to most authors, it gives rise, besides the adventitious roots, to the vascular tissues and part of the cortex. In other words, it has centripetal and centrifugal activity. For some authors, however, it gives rise only to the vascular system, and for others, only to part of the cortex. However, this work demonstrated that PTM corresponds to the pericycle in the meristematic phase or to the pericycle associated with the endodermis, also with meristematic activity. It was observed that the pericycle was responsible for the formation of the vascular system of the rhizome and of the adventitious roots; the endodermis gave rise to cell layers with radial disposition which comprised the inner portion of the stem cortex, and which corresponded to the region known as the derivatives of the meristematic endodermis (DME). A continuity was also demonstrated between the tissues of the stem and root in species of Scleria Berg. (Cyperaceae).

Circulation and suspended particulate matter transport in a tidally dominated estuary: caravelas estuary, Bahia, Brazil

The circulation and transport of suspended particulate matter in the Caravelas Estuary are assessed. Nearly-synoptic hourly hydrographic, current (ADCP velocity and volume transport) and suspended particulate matter data were collected during a full semidiurnal spring tide, on the two transects Boca do Tomba and Barra Velha and on longitudinal sections at low and high tide. On the first transect the peak ebb currents (-1.5 ms-1) were almost twice as strong as those of the wider and shallow Barra Velha inlet (-0.80 ms-1) and the peak flood currents were 0.75 and 0.60 ms-1, respectively. Due to the strong tidal currents both inlets had weak vertical salinity stratification and were classified with the Stratification-circulation Diagram as Type 2a (partially mixed-weakly stratified) and Type 1a (well mixed). Volume transports were very close, ranging from -3,500 to 3,100 m³s-1 at the ebb and flood, respectively, with a residual -630 m³s-1. The concentration of the suspended particulate matter was closely related to the tidal variation and decreased landwards from 50 mg.L-1 at the estuary mouth, to 10 mg.L-1 at distances of 9 and 16 km for the low and high tide experiments, respectively. The total residual SPM transport was out of the estuary at rates of -18 tons per tidal cycle.

Influence of Annealing Heat Treatment and Cr, Mg, and Ti Alloying on the Mechanical Properties of High-Silicon Cast Iron

The influence of annealing on the mechanical properties of high-silicon cast iron for three alloys with distinct chromium levels was investigated. Each alloy was melted either with or without the addition of Ti and Mg. These changes in the chemical composition and heat treatment aimed to improve the material's mechanical properties by inhibiting the formation of large columnar crystals, netlike laminae, precipitation of coarse packs of graphite, changing the length and morphology of graphite, and rounding the extremities of the flakes to minimize the stress concentration. For alloys with 0.07 wt.% Cr, the annealing reduced the impact resistance and tensile strength due to an enhanced precipitation of refined carbides and the formation of interdendritic complex nets. Annealing the alloys containing Ti and Mg led to a decrease in the mechanical strength and an increase in the toughness. Alloys containing approximately 2 wt.% Cr achieved better mechanical properties as compared to the original alloy. However, with the addition of Ti and Mg to alloys containing 2% Cr, the chromium carbide formation was inhibited, impairing the mechanical properties. In the third alloy, with 3.5 wt.% of Cr additions, the mechanical strength improved. The annealing promoted a decrease in both hardness and amount of iron and silicon complex carbides. However, it led to a chromium carbide formation, which influenced the mechanical characteristics of the matrix of the studied material.

Chemical similarities between Galactic bulge and local thick disk red giants: O, Na, Mg, Al, Si, Ca, and Ti

Context. The formation and evolution of the Galactic bulge and its relationship with the other Galactic populations is still poorly understood. Aims. To establish the chemical differences and similarities between the bulge and other stellar populations, we performed an elemental abundance analysis of alpha- (O, Mg, Si, Ca, and Ti) and Z-odd (Na and Al) elements of red giant stars in the bulge as well as of local thin disk, thick disk and halo giants. Methods. We use high-resolution optical spectra of 25 bulge giants in Baade's window and 55 comparison giants (4 halo, 29 thin disk and 22 thick disk giants) in the solar neighborhood. All stars have similar stellar parameters but cover a broad range in metallicity (-1.5 < [Fe/H] < +0.5). A standard 1D local thermodynamic equilibrium analysis using both Kurucz and MARCS models yielded the abundances of O, Na, Mg, Al, Si, Ca, Ti and Fe. Our homogeneous and differential analysis of the Galactic stellar populations ensured that systematic errors were minimized. Results. We confirm the well-established differences for [alpha/Fe] at a given metallicity between the local thin and thick disks. For all the elements investigated, we find no chemical distinction between the bulge and the local thick disk, in agreement with our previous study of C, N and O but in contrast to other groups relying on literature values for nearby disk dwarf stars. For -1.5 < [Fe/H] < -0.3 exactly the same trend is followed by both the bulge and thick disk stars, with a star-to-star scatter of only 0.03 dex. Furthermore, both populations share the location of the knee in the [alpha/Fe] vs. [Fe/H] diagram. It still remains to be confirmed that the local thick disk extends to super-solar metallicities as is the case for the bulge. These are the most stringent constraints to date on the chemical similarity of these stellar populations. Conclusions. Our findings suggest that the bulge and local thick disk stars experienced similar formation timescales, star formation rates and initial mass functions, confirming thus the main outcomes of our previous homogeneous analysis of [O/Fe] from infrared spectra for nearly the same sample. The identical a-enhancements of thick disk and bulge stars may reflect a rapid chemical evolution taking place before the bulge and thick disk structures we see today were formed, or it may reflect Galactic orbital migration of inner disk/bulge stars resulting in stars in the solar neighborhood with thick-disk kinematics.

Spin-wave fluctuations in ferrimagnetic Mg(x)Fe(3-x)O(4) nanoparticles

We have performed a systematic study of the magnetic properties of a series of ferrimagnetic nanoparticles of Mg(x)Fe(3-x)O(4) (0.8 <= x <= 1.5) prepared by the combustion reaction method. The magnetization data can be well fitted by Bloch's law with T(3/2). Bloch's constant B determined from the fitting procedure was found to increase with Mg content x from similar to 3.09 X 10(-5) K(-3/2) for x = 0.8 to 6.27 X 10(-5) K(-3/2) for x=1.5. The exchange integral J(AB) and the spin-wave stiffness constant D of Mg(x)Fe(3-x)O(4) nanoparticles were also determined as similar to 0.842 and 0.574 meV and 296 and 202 meV angstrom(2) for specimens with x=0.8 and 1.5, respectively. These results are discussed in terms of cation redistribution among A and B sites on these nanostructured spinel ferrites. (C) 2010 American Institute of Physics. [doi: 10.1063/1.3359709]

Possible hyperdeformed band in (36)Ar observed in (12)C+(24)Mg elastic scattering

Fifteen strongly oscillating angular distributions of the elastic scattering of (12)C + (24)Mg at energies around the Coulomb barrier (E(c.m). = 10.67-16.00 MeV) are reproduced by adding five Breit-Wigner resonance terms to the l = 2, 4, 6, 7, and 8 elastic S matrix. The nonresonant, background elastic scattering S matrix S(l)(0) is calculated using the Sao Paulo potential. The J = 2, 4, 6, 7, and 8 (h) over bar molecular resonances fit well into a rotational molecular band, together with other higher lying resonances observed in the (16)O + (20)Ne elastic scattering. We propose that the presently observed, largely deformed molecular band corresponds to the hyperdeformed band, which has been found previously in alpha-cluster calculations, as well as in a new Nilsson model calculation. Systematic study of its possible clusterizations predicts the preference of the (12)C + (24)Mg and (16)O + (20)Ne molecular structure, in accordance with our present results.