Photonic Band Gaps in One-Dimensionally Ordered Cold Atomic Vapors

We experimentally investigate the Bragg reflection of light at one-dimensionally ordered atomic structures by using cold atoms trapped in a laser standing wave. By a fine-tuning of the periodicity, we reach the regime of multiple reflection due to the refractive index contrast between layers, yielding an unprecedented high reflectance efficiency of 80%. This result is explained by the occurrence of a photonic band gap in such systems, in accordance with previous predictions.

A model for adsorption of condensable vapors on nonporous materials

A new isotherm is proposed here for adsorption of condensable vapors and gases on nonporous materials having type II isotherms according to the Brunauer-Deming-Deming-Teller (BDDH) classification. The isotherm combines the recent molecular-continuum model in the multilayer region, with other widely used models for sub-monolayer coverage, some of which satisfy the requirement of a Henry's law asymptote. The model is successfully tested using isotherm data for nitrogen adsorption on nonporous silica, carbon and alumina, as well as benzene and hexane adsorption on nonporous carbon. Based on the data fits, out of several different alternative choices of model for the monolayer region, the Freundlich and the Unilan models are found to be the most successful when combined with the multilayer model to predict the whole isotherm. The hybrid model is consequently applicable over a wide pressure range. (C) 2000 Elsevier Science B.V. All rights reserved.

Surface diffusion of strongly adsorbing vapors in activated carbon by a differential permeation method

Conventional methods to determine surface diffusion of adsorbed molecules are proven to be inadequate for strongly adsorbing vapors on activated carbon. Knudsen diffusion permeability (B-k) for strongly adsorbing vapors cannot be directly estimated from that of inert gases such as helium. In this paper three models are considered to elucidate the mechanism of surface diffusion in activated carbon. The transport mechanism in all three models is a combination of Knudsen diffusion, viscous flow and surface diffusion. The collision reflection factor f (which is the fraction of molecules undergoing collision to the solid surface over reflection from the surface) of the Knudsen diffusivity is assumed to be a function of loading. It was found to be 1.79 in the limit of zero loading, and decreases as loading increases. The surface diffusion permeability increases sharply at very low pressures and then starts to decrease after it has reached a maximum (B(mum)s) at a threshold pressure. The initial rapid increase in the total permeability is mainly attributed to surface diffusion. Interestingly the B(mum)s for all adsorbates appear at the same volumetric adsorbed phase concentration, suggesting that the volume of adsorbed molecules may play an important role in the surface diffusion mechanism in activated carbon. (C) 2003 Elsevier Ltd. All rights reserved.

Extraction and concentration of vapors from fire debris for forensic purposes: evaluation of the use of Radiello Passive Air Sampler

The Radiello Passive Air Sampler is one of the latest innovations developed for the sampling of pollutants in the air by passive headspace. It has been reported that its properties allow an enhanced sensitivity, reproducibility and adsorption capacity. It therefore appears to be of interest in the extraction of potential residues of ignitable liquids present in fire debris when arson is suspected. A theoretical approach and several laboratory tests have made it possible to precisely characterize in a forensic perspective the potential of the device in extracting and concentrating the vapors of ignitable liquids found in fire debris. Despite some advantages, the Radiello device appears to be less efficient than traditional axial symmetry samplers.

Brugada syndrome unmasked by accidental inhalation of gasoline vapors.

Loss-of-function mutations in the gene SCN5A can cause Brugada syndrome (BrS), which is an inherited form of idiopathic ventricular fibrillation. We report the case of a 46-year-old patient, with no previous medical history, who had ventricular fibrillation after accidental inhalation of gasoline vapors. His electrocardiogram (ECG) showed a typical type-1 BrS pattern that persisted after the acute event. Genetic investigations allowed the identification of a novel SCN5A mutation leading to a frame-shift and early termination of the channel protein. Biochemical and cellular electrophysiology experiments confirmed the loss-of-function of the mutant allele. The patient was implanted with a cardioverter/defibrillator.

Hand-disinfectant alcoholic vapors in incubators

Objective: To analyze the atmosphere inside incubators regarding alcoholic solvent such as isopropanol or ethanol which are commonly used in hand disinfecting solutions. Design: Observational. Setting: The third level neonatal unit of the Centre Hospitalier Universitaire Vaudois, Lausanne, Switzerland. Patients: Nine neonates with median (range) gestational age of 29 4/7 (25 5/7-39 0/7) weeks and birth weight of 960 (550-3050) grams. All neonates were inside incubators. Interventions: Alcoholic vapors inside incubators were directly and cumulatively measured by photoionisation and gas chromatography respectively after absorption on a charcoal sampling tube. Results: Eleven studies (mean study time: 230 ± 19 minutes) were performed. Highly variable isopropanol/ethanol concentrations profiles were found inside incubators. Peak value for isopropanol was 1982 part per million and for ethanol was 906 part per million. Conclusions: Incubators' inner atmosphere can be highly polluted by alcohol vapors. To reduce them staff should respect long evaporation time between hands disinfection and manipulations inside incubators. The use of an ethanol-based disinfecting solution, because of its short evaporation time, could be favored. As alcohol vapor toxicity for neonate remains largely unknown, further studies could be welcome.

Hand-disinfectant alcoholic vapors in incubators

La désinfection des mains avant d'effectuer des soins est un acte indispensable en médecine clinique pour limiter le risque de transmission de germes. Après utilisation des produits désinfectants mis à disposition dans les services de soins, il se dégage une odeur alcoolique forte et désagréable, liée directement aux alcools antimicrobiens des solutions. Une étude a montré qu'une exposition aiguë et brève aux vapeurs d'éthanol et isopropanol chez des enfants prématurés pouvait être mise en relation avec des changements hémodynamiques au niveau de la zone olfactive orbito-frontale [1]. Aucune norme réglementant les concentrations de vapeurs d'éthanol ou isopropanol auxquelles les nouveau-nés peuvent être exposés n'existe. Cette thèse avait pour but d'étudier l'exposition des nouveaux nés soignés dans des incubateurs à des vapeurs d'alcool (éthanol et isopropanol). Elle était composée de 2 parties qui ont été publiées dans 2 articles différents et qui représentent le travail de doctorat [2-3]. La 1ère partie était une étude observationnelle d'une série de cas [2], Des mesures des concentrations des vapeurs d'alcool ont été effectuées auprès de 9 nouveau-nés soignés dans des incubateurs de même modèle au sein de l'unité de néonatologie du Centre Hospitalier Universitaire Vaudois à Lausanne. Sur 4 heures, les concentrations instantanées et moyennes ont été mesurées par deux techniques (photoionisation et respectivement chromatographic après absorption sur charbon actif). Onze analyses ont été effectuées en 2004-2005. Elles ont révélé des taux très variables d'éthanol et d'isopropanol dans les incubateurs (avec des valeurs maximales de 1982 ppm pour l'isopropanol et 906 ppm pour l'éthanol) correspondant aux introduction de mains fraîchement désinfectées dans les isolettes. Les concentrations moyennes variaient entre 9.8 ppm et plus de 61 ppm pour l'éthanol et < 0.01 ppm et 119 ppm pour l'isopropanol. La 2e partie a été réalisée en collaboration avec le PD Dr D. Vernez de l'Institut Universitaire Romand de Santé au Travail [3], Un modèle théorique prédictif des concentrations alcooliques dans des incubateurs pour nouveau-nés a été développé. Des séries de mesures standardisées des variations des concentrations alcooliques dans un incubateur sans patient ont été effectuées en changeant trois variables: 1) le renouvellement de l'air dans l'incubateur en variant le nombre de portes ouvertes, 2) la quantité de solution alcoolique versée sur les mains avant de les introduire dans l'incubateur 3) le temps de séchage des mains après désinfection et avant de les introduire dans l'incubateur. La modélisation a permis de décrire la cinétique des concentrations d'alcool dans les incubateurs et d'évaluer les pistes potentielles pour diminuer les risques d'exposition des nouveau-nés à ces vapeurs dans leurs incubateurs. En conclusion, la 1 ère partie a mis en évidence, pour la première fois, que des nouveau- nés soignés en incubateurs peuvent être exposés à des vapeurs d'alcool. Comme il η y a aucune norme d'exposition pour cette population et que les seules limites d'exposition existantes sont destinées à des travailleurs adultes, aucune conclusion précise ne peut être avancée sur les risques toxicologiques. L'exposition à des vapeurs polluantes d'un nouveau-né à terme ou prématuré, en plein développement neuro-sensoriel, devrait toutefois, à priori, être évitée. La 2ème partie permet de proposer des pistes pratiques pour diminuer les concentrations des vapeurs d'alcool dans les incubateurs: respecter le temps de séchage des mains après leur désinfection et avant de les introduire dans les isolettes et/ou préférer un désinfectant alcoolique à faible temps d'évaporation.

Changes of physical properties of glass surfaces exposed to KNO3 vapors

Modifications of glass surfaces were studied after exposure of samples to an atmosphere resulting from the decomposition of molten KNO3. The diffusion coefficient of K+ ions migrating into the surfaces of float glass and synthesized glasses doped with up to 5 wt% SnO2 was calculated by the Boltzmann-Matano technique. The Vickers hardness and the refractive index increase with exposure time. Infrared spectra show that the migration of K+ is responsible for an increase in the number of non-bridging oxygens in the exposed samples. The spectra of the synthesized glasses present evidences that their surfaces undergo crystallization during the exposure. All results lead to the conclusion that the presence of tin in the glasses hinders the diffusion of K+ ions, thus affecting the Vickers hardness, the refractive index and the infrared spectra. It is shown that the exposure method can be used as an alternative process to promote the K+ migration into glass surfaces. (c) 2006 Elsevier B.V. All rights reserved.

Investigation of hazards posed by chemical vapors released in marine operations--phase I /

Bibliography: p. A1-A32.

Characterization of high temperature vapors and gases : proceedings of the 20th Materials Research Symposium held at the National Bureau of Standards, Gaithersburg, Maryland, September 18-22, 1978 /

Includes bibliographical references and indexes.

Tables of the properties of steam and other vapors and temperature-entropy table,

Mode of access: Internet.

Analysis of adsorption of gases and vapors on nonporous graphitized thermal carbon black

In this paper we analyzed the adsorption of a large number of gases and vapors on graphitized thermal carbon black. The Henry constant was used to determine the adsorbate-adsorbent interaction energy, which is found to be a modest decreasing function of temperature. Analysis of the complete adsorption isotherm over a wider range of pressure yields information on the monolayer coverage concentration and the adsorbate-adsorbate interaction energy. Among the various equations tested, the Hill-de Boer equation accounting for BET-postulated multilayer formation describes well the adsorption isotherms of all adsorbates. On average, the adsorbate-adsorbate interaction energy in the adsorbed phase is less than that in the bulk phase, suggesting that the distance between adsorbed molecules in the first layer of the adsorbed phase is slightly less than the equilibrium distance between two adsorbate molecules in the bulk phase. This suggests that the first layer is in a compressed state, which is due to the attraction of the adsorbent surface. The monolayer concentration as determined from the fitting of the Hill-de Boer equation with experimental data is slightly larger than the values calculated from the molecular projection area, suggesting that molecules can be oriented such that a larger number of molecules can be accommodated on the carbon black surface. This further supports the shorter distance between adsorbate molecules in the adsorbed phase.