Estudo da qualidade de processos na fabricação de semicondutores

A indústria de semicondutores é um sector em permanente evolução tecnológica. A tendência de miniaturização e de otimização do espaço, a necessidade de produzir circuitos cada vez mais complexos, a tendência para o incremento do número de camadas em cada circuito integrado, são as condições necessárias para que a evolução tecnológica nesta área seja uma constante. Os processos ligados à produção de semicondutores estão também em permanente evolução, dada a pressão efetuada pelas necessidades acima expostas. Os equipamentos necessitam de uma crescente precisão, a qual tem que ser acompanhada de procedimentos rigorosos para que a qualidade atingida tenha sempre o patamar desejado. No entanto, a constante evolução nem sempre permite um adequado levantamento de todas as causas que estão na origem de alguns problemas detetados na fabricação de semicondutores. Este trabalho teve por objetivo efetuar um levantamento dos processos ligados ao fabrico de semicondutores a partir de uma pastilha de silício (wafer) previamente realizada, identificando para cada processo os possíveis defeitos introduzidos pelo mesmo, procurando inventariar as causas possíveis que possam estar na origem desse defeito e realizar procedimentos que permitam criar regras e procedimentos perfeitamente estabelecidos que permitam aprender com os erros e evitar que os mesmos problemas se possam vir a repetir em situações análogas em outros produtos de uma mesma família.

Implantação da metodologia Seis Sigma e aplicação da técnica estatística projeto de experimentos na resolução de problemas e otimização de processos de fabricação

Resumo não disponível.

Melhoria de processos de fabricação de anéis de centragem de alto-falantes

O tema deste trabalho versa sobre a produção de anéis de centragem de alto-falantes de uma empresa de alto-falantes do Rio Grande do Sul. O objetivo geral é melhorar o processo de fabricação de anéis de centragem de alto-falantes.Como objetivo específico, quer-se conhecer melhor, através de estudos de Desdobramento da Função Qualidade (QFD), Projeto deExperimentos e Análise de Regressão, os parâmetros de processo que afetam a qualidade dos mesmos,e apontar soluções para amelhoria do processo, reduzindo refugos e retrabalhos. Em função dos resultados, foi elaborado um plano de ação demelhorias do processo, partindodas conclusões do experimento e visando-se melhorar a situaçãoatual do processo na empresa.Na apresntação dos resultados, testa-se o trabalho no intuito de melhorar o processo na empresa em questão.

Influência de defeitos e diferentes processos de fabricação nas propriedades mecânicas finais de cerâmicas

Os materiais cerâmicos são atualmente cada vez utilizados como opção na engenharia mundial. Por se tratar de materiais com alta resistência mecânica, possuem muitas aplicações em diversas áreas, como por exemplo a de mancais, a automotiva (sensores, isoladores, catalisadores, pistões, válvulas, revestimentos), a de implantes biocompatíveis (dentário, substituição óssea, válvulas cardíacas), a de produtos sujeitos ao desgaste (guias), a de refratários (revestimento de equipamento bélico, componentes de fornos), a eletrônica, e outras. Nos processos de fabricação da cerâmica há uma gama de fatores que contribuem para as características do produto final. Devido a isso, muitos pesquisadores têm trabalhado no estudo da influência de determinados defeitos e técnicas de produção de cerâmicas nas características do produto final. Este trabalho tem como objetivo fazer uma revisão bibliográfica de recentes artigos que analisam a influência de fatores como velocidade de queima, surgimento de trincas, porosidade, fases cristalinas, e tamanho de partículas, nas propriedades mecânicas finais das cerâmicas. Pode-se concluir que é possível aperfeiçoar o processo de fabricação da cerâmica a fim de promover as melhores propriedades mecânicas possíveis, conhecendo-se fatores prejudiciais e métodos adequados para se obter o melhor produto final.

Desenvolvimento de software aplicativo para controle de custeios por atividades identificáveis nos processos de fabricação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Redução do tempo de setup de máquinas de usinagem em uma industria automobilística

Continuous improvement of industrial processes is one way to become companies more competitive in the market. For this, a fairly widespread use is the methodology of lean production systems, by eliminating waste. One of the tools of these systems is the method of rapid exchange of die or also called SMED, which will be applied in this study. The study aims to develop proposals for reducing the time of set up of two machines in two machining lines, watching also the ergonomics and safety conditions in this operations. The set up time reduction is justified among others, due to increase the machine productivity. In applying the connecting rod machining line, there were two types of exchange. Reductions in time to set up proposals reached values of 47% to one of them, and 55% to the other. It is important to underline that to reach this result, there was no need for large investments. In the application in block machining line, was developed an improvement in the ergonomic area. It was placed a pulley block that came to increase the time of tool change. Aiming to improve the security of the exchange, without productivity loss, the method was applied to reduce this time. It was developed two proposals.: the first would reduce that time by 19%, and does not require many resources of the company. The second involves the parallelization of the exchange, so that the reduction is 48%. However, this proposal requires one more manpower at the time of exchange and it is not always possible

Efeitos dos parâmetros de usinagem no acabamento superficial de materiais cerâmicos a verde

Pós-graduação em Engenharia Mecânica - FEB

Aplicação de redes neurais artificiais na predição de diâmetro e rugosidade durante o processo de furação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da predição da circularidade e rugosidade de peças retificadas utilizando as redes neurais artificiais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de uma nova sistemática para centragem e alinhamento da plataforma giratória R-9350 na mandriladora CNC PAMA SPEEDRAM 3000

In heavy machining industries, a critical point that must be taken into account is setup. Because the characteristics of machine tools and parts to be machined, usually pieces robust and large, the preparation of these parts must be made accurately for machining has a good result as planned. As a result of the difficulty raised in the setup machining of heavy parts, companies in this segment seek alternatives to reduce the unproductive time caused by setup and optimize machining processes. One way was found that these companies create operating instructions that describe and standardize the operation between its employees, as well as deploy a control machining times to measure the unproductive time caused by the setup. This work studied a new system for the realization of centering and alignment of Rotating Deck R-9350 in CNC Milling Machine PAMA Speedram 3000, in Liebherr Brazil company. The part Rotating Deck R-9350 is a critical part in which its machining in PAMA Milling Machine is made in three phases and their setup times are quite high and involve stopping the machine. It has been tested and proposed a solution to the realization of this part of the setup without the use of the machine, but of the measuring instrument three-dimensional Laser tracker, with which the machine continued to work, while he was in the centering and alignment of other parts. It was noted that the instrument technically attended the need and it was possible to perform this operation more accurately

Proposta de desenvolvimento de um setor de fomento à padronização de processos em uma empresa de usinagem

The industries face increasingly fierce competition, so that differentiation becomes more and more difficult. In the case of the branch of machine tool industries this scenario is aggressive, those firms face competition from around the world, which have good quality and low price. This paper aims to propose the creation of a department to promote standardization in a company of special tools. The goal was achieved from survey of theories and applications of quality management, knowledge management and standardization, done by scholars in these areas, which added the use of qualitative study resulted in a proposal that contained not only the creation of this department as possible approaches that can be applied by him. This work is limited to the study of a company that manufactures special tools of the state of São Paulo, which despite its small size and limited number of employees, also presents common situations to other companies in the field, especially with regard to the behavior employees, and present good practices that can be implemented by any company

Estudo da utilização de ferramentas a base de nitreto de silício (Si3N4) e alumina (Al2O3) na usinagem do ferro fundido vermicular

Machining is one of the most commonly manufacturing processes used in the modern world, consuming millions of dollars annually. Because of this, it is crucial for the automotive industry to reduce costs on their heat-resistant alloy machining processes, such as compacted graphite iron (CGI), which has shown an increasing trend of its application in diesel engine blocks, brakes disks, among other applications, due to its superior mechanical properties to gray cast iron. Despite this advantage, its use is still limited due to its difficulty of machining, moreover, cutting tools are displayed as the main factor in increasing the machining cost. Seeking an alternative to a better machinability of CGI, this paper aims to study two types of ceramic tools developed in Brazil, and benchmark their performance by dry turning. For this, were used CGI class 450 and two tools: ceramic of silicon nitride (Si3N4) and alumina-based (Al2O3), with a cutting speed (Vc) of 300, 400 and 500 m / min; feed (f) of 0.2 mm / rev and depth of cut (ap) of 0.5 mm, using three replicates and starting with new cutting edges. The results showed that the Al2O3 tool had the best performance in Vc of 500 m / min, while the Si3N4 tool had the best results in Vc of 300 m / min. This can be explained by the tool of Si3N4 based include soft intergranular phase, called amorphous, while alumina has higher abrasion resistance due to its high refractoriness. The results make it clear that the tools have significant potential for machining of compacted graphite iron, being necessary a strict control of the cutting parameters used

Estudo da utilização de ferramentas a base de nitreto de silício (Si3N4) e alumina (Al2O3) na usinagem do ferro fundido vermicular

Machining is one of the most commonly manufacturing processes used in the modern world, consuming millions of dollars annually. Because of this, it is crucial for the automotive industry to reduce costs on their heat-resistant alloy machining processes, such as compacted graphite iron (CGI), which has shown an increasing trend of its application in diesel engine blocks, brakes disks, among other applications, due to its superior mechanical properties to gray cast iron. Despite this advantage, its use is still limited due to its difficulty of machining, moreover, cutting tools are displayed as the main factor in increasing the machining cost. Seeking an alternative to a better machinability of CGI, this paper aims to study two types of ceramic tools developed in Brazil, and benchmark their performance by dry turning. For this, were used CGI class 450 and two tools: ceramic of silicon nitride (Si3N4) and alumina-based (Al2O3), with a cutting speed (Vc) of 300, 400 and 500 m / min; feed (f) of 0.2 mm / rev and depth of cut (ap) of 0.5 mm, using three replicates and starting with new cutting edges. The results showed that the Al2O3 tool had the best performance in Vc of 500 m / min, while the Si3N4 tool had the best results in Vc of 300 m / min. This can be explained by the tool of Si3N4 based include soft intergranular phase, called amorphous, while alumina has higher abrasion resistance due to its high refractoriness. The results make it clear that the tools have significant potential for machining of compacted graphite iron, being necessary a strict control of the cutting parameters used

Influência da utilização do fluido de corte com adição de grafeno na temperatura de usinagem e formação de rebarba no processo de micro fresamento

As time passed, humanity needed the development of new materials used in various activities. High strength materials such as titanium and Inconel for example, had been studied because they are widely used for implants in biomedicine, as well as their use in aerospace and automotive industries. Because of its thermal and mechanical properties, these materials are considered difficult to machine, promoting a rapid wear of cutting tools, primarily caused by the high temperatures in machining. With the development of new materials has emerged the need of developing new manufacturing processes. One of today’s innovative processes is the micro-manufacturing. Being a process with a defined cutting tool geometry, burr formation is a constant and undesirable phenomenon formed during the machininig process. Being detrimental to the manufacturing process, overspending deburring operations are constantly employed leading to increase the aggregate cost to the manufactured material. Assembly components are also impaired if there is no control of the burr, with consequences including the disposal of components due to the occurence of this phenomenon. This paper presents the study of micro-milling Inconel 718, investigating influential parameters in the formation of burrs in order to minimize the occurrence of this phenome non. Different feed rates per tooth and cutting speed are evaluated, and different cutting fluids with different methods of applying the fluid. Adding graphene to cutting fluids was considered as a variable to be investigated, which is considered an excellent solid lubricant, in addition to increasing the thermal conductivity of the cooling solution (AZIMI; MOZAF FARI, 2015). The micro-milling temperature was evaluated in the present work. It was observed a new phenomenon that causes the machined surface temperature decreases below room temperature when using the solution water + oil. This phenomenon is explained in further chapters. In order to unravel this phenomenon, a new test was proposed and, from this test, it can be concluded, comparatively, which cutting fluid has a better cooling property.Using cutting fluid with different thermal properties has shown influence when analy zing burr formation and reducing machining temperature.