Human interfaces to structured documents

This research investigates some of the reasons for the reported difficulties experienced by writers when using editing software designed for structured documents. The overall objective was to determine if there are aspects of the software interfaces which militate against optimal document construction by writers who are not computer experts, and to suggest possible remedies. Studies were undertaken to explore the nature and extent of the difficulties, and to identify which components of the software interfaces are involved. A model of a revised user interface was tested, and some possible adaptations to the interface are proposed which may help overcome the difficulties. The methodology comprised: 1. identification and description of the nature of a ‘structured document’ and what distinguishes it from other types of document used on computers; 2. isolation of the requirements of users of such documents, and the construction a set of personas which describe them; 3. evaluation of other work on the interaction between humans and computers, specifically in software for creating and editing structured documents; 4. estimation of the levels of adoption of the available software for editing structured documents and the reactions of existing users to it, with specific reference to difficulties encountered in using it; 5. examination of the software and identification of any mismatches between the expectations of users and the facilities provided by the software; 6. assessment of any physical or psychological factors in the reported difficulties experienced, and to determine what (if any) changes to the software might affect these. The conclusions are that seven of the twelve modifications tested could contribute to an improvement in usability, effectiveness, and efficiency when writing structured text (new document selection; adding new sections and new lists; identifying key information typographically; the creation of cross-references and bibliographic references; and the inclusion of parts of other documents). The remaining five were seen as more applicable to editing existing material than authoring new text (adding new elements; splitting and joining elements [before and after]; and moving block text).

An automatic correction tool for relational database schemas

A Web-based tool developed to automatically correct relational database schemas is presented. This tool has been integrated into a more general e-learning platform and is used to reinforce teaching and learning on database courses. This platform assigns to each student a set of database problems selected from a common repository. The student has to design a relational database schema and enter it into the system through a user friendly interface specifically designed for it. The correction tool corrects the design and shows detected errors. The student has the chance to correct them and send a new solution. These steps can be repeated as many times as required until a correct solution is obtained. Currently, this system is being used in different introductory database courses at the University of Girona with very promising results

wxGRASS: una interfaz gráfica de usuario para la integración de diversos programas libres para SIG

This paper presents a Graphical User Interface, developed with python and the graphic library wxpython, to GRASS GIS. This GUI allows to access several modules with a graphic interface written in Spanish. Its main purpouse is to be a teaching tool, that is the reason way it only allows to access several basic put crucial moludes. It also allows user to organize the elements presented to stress the aspects to be resalted in a particular working sesion with the program

ACME - Mòdul d'usuaris convidats

El projecte ACME va néixer, l’any 1998, amb la finalitat de millorar la docència de les matemàtiques en els estudis d’Enginyeria Industrial i Enginyeries Tècniques de l’Escola Politècnica de la Universitat de Girona, amb la intenció de buscar la manera de que els alumnes s’impliquessin i participessin més activament en aquesta matèria fent ús de la xarxa com a via de comunicació. El projecte ACME, Avaluació Continuada i Millora de l’Ensenyament, és una eina d’e-learning que té com a objectiu fer una avaluació continuada dels alumnes a través d’uns dossiers personalitzats de problemes que el professor proposa. El sistema permet fer el seguiment, per part del professor, del progrés del conjunt de la classe, o d’un alumne individual, en una assignatura concreta. Això fa que l’ACME tingui un gran valor pedagògic. Els objectius d’aquest projecte final de carrera són els següents: • Desenvolupar un sistema de gestió d’usuaris convidats que ens permeti acceptar o denegar l’accés a usuaris que prèviament han fet una petició per poder utilitzar l’ACME. • Crear un sistema que faciliti la tasca d’assignar als usuaris els temes i els problemes més adients pel seu perfil. • Desenvolupar tot un seguit de millores i ampliacions amb la intenció d’integrar el nou mòdul dins les interfícies existents: Ampliar la interfície d’administració en l’apartat d’usuari amb la opció per gestionar els usuaris convidats. Ampliar la interfície d’administració en l’apartat del quadern de problemes amb les opcions adients per tal de gestionar les assignatures dels convidats.

Falcon herramientas de software para el procesamiento aerofotogramétrico

En el área de Aerofotogrametría Digital, el software comercial prevalente para postproceso presenta limitaciones debido a dos factores: (i) las legislaciones de cada país o región requieren diferentes convenciones, y (ii) las necesidades de las empresas son tan cambiantes que no justifican la compra de software de alto rendimiento, que puede quedar sin utilizar debido a un viraje del mercado -- El presente proyecto se ha desarrollado para atender necesidades de procesamiento automático de planos (partición, detección y corrección de errores, etc.), así como módulos de importación – exportación paquete a paquete, trazado de rutas e interacción con GPS -- Este artículo informa de los dos últimos aspectos -- Debido a necesidades de los clientes, los archivos entregados deben llevar un formato comercial (DWG, DXF), pero el procesamiento de los archivos debe ser hecho en paquetes y formatos diversos (DGN) -- Por lo tanto, fue necesario diseñar e implementar un formato acompañante que permitió llevar la información que se pierde al usar filtros comerciales (DGN a DXF/DWG) -- Asimismo se crearon módulos de importación y exportación redundantes, que hicieron efectivos dichos atributos -- En el aspecto de generación de rutas de vuelo, se reportan en este artículo la aplicación de algoritmos tradicionales de barrido (peinado) de áreas 2D, a los cuales se agregaron restricciones geométricas (puntos fijos, offsets, orden de los barridos de acuerdo a coordenadas del sitio de partida, etc.) -- Debido a los altos costos de equipos equivalentes, se decidió desarrollar software para traducción de rutas entre formatos GPS y formatos geográficos locales al país -- Ello permite la eliminación de fuentes de error y además facilita la carga del plan de vuelo, a costos mucho menores a los del hardware / software comercial

Design and implementation of graphical user interfaces for complex simulations

The development of increasingly powerful computers, which has enabled the use of windowing software, has also opened the way for the computer study, via simulation, of very complex physical systems. In this study, the main issues related to the implementation of interactive simulations of complex systems are identified and discussed. Most existing simulators are closed in the sense that there is no access to the source code and, even if it were available, adaptation to interaction with other systems would require extensive code re-writing. This work aims to increase the flexibility of such software by developing a set of object-oriented simulation classes, which can be extended, by subclassing, at any level, i.e., at the problem domain, presentation or interaction levels. A strategy, which involves the use of an object-oriented framework, concurrent execution of several simulation modules, use of a networked windowing system and the re-use of existing software written in procedural languages, is proposed. A prototype tool which combines these techniques has been implemented and is presented. It allows the on-line definition of the configuration of the physical system and generates the appropriate graphical user interface. Simulation routines have been developed for the chemical recovery cycle of a paper pulp mill. The application, by creation of new classes, of the prototype to the interactive simulation of this physical system is described. Besides providing visual feedback, the resulting graphical user interface greatly simplifies the interaction with this set of simulation modules. This study shows that considerable benefits can be obtained by application of computer science concepts to the engineering domain, by helping domain experts to tailor interactive tools to suit their needs.

Social NUI: Social perspectives in natural user interfaces

Natural User Interfaces (NUI) offer rich ways for interacting with the digital world that make innovative use of existing human capabilities. They include and often combine different input modalities such as voice, gesture, eye gaze, body interactions, touch and touchless interactions. However much of the focus of NUI research and development has been on enhancing the experience of individuals interacting with technology. Effective NUIs must also acknowledge our innately social characteristics, and support how we communicate with each other, play together, learn together and collaboratively work together. This workshop concerns the social aspects of NUI. The workshop seeks to better understand the social uses and applications of these new NUI technologies -- how we design these technologies for new social practices and how we understand the use of these technologies in key social contexts.

SymbolDesign: A User-centered Method to Design Pen-based Interfaces and Extend the Functionality of Pointer Input Devices

A method called "SymbolDesign" is proposed that can be used to design user-centered interfaces for pen-based input devices. It can also extend the functionality of pointer input devices such as the traditional computer mouse or the Camera Mouse, a camera-based computer interface. Users can create their own interfaces by choosing single-stroke movement patterns that are convenient to draw with the selected input device and by mapping them to a desired set of commands. A pattern could be the trace of a moving finger detected with the Camera Mouse or a symbol drawn with an optical pen. The core of the SymbolDesign system is a dynamically created classifier, in the current implementation an artificial neural network. The architecture of the neural network automatically adjusts according to the complexity of the classification task. In experiments, subjects used the SymbolDesign method to design and test the interfaces they created, for example, to browse the web. The experiments demonstrated good recognition accuracy and responsiveness of the user interfaces. The method provided an easily-designed and easily-used computer input mechanism for people without physical limitations, and, with some modifications, has the potential to become a computer access tool for people with severe paralysis.

Using the Journalistic Metaphor to Design User Interfaces That Explain Sensor Data

Facilitating general access to data from sensor networks (including traffic, hydrology and other domains) increases their utility. In this paper we argue that the journalistic metaphor can be effectively used to automatically generate multimedia presentations that help non-expert users analyze and understand sensor data. The journalistic layout and style are familiar to most users. Furthermore, the journalistic approach of ordering information from most general to most specific helps users obtain a high-level understanding while providing them the freedom to choose the depth of analysis to which they want to go. We describe the general characteristics and architectural requirements for an interactive intelligent user interface for exploring sensor data that uses the journalistic metaphor. We also describe our experience in developing this interface in real-world domains (e.g., hydrology).

Improving surgery operations by means of cloud systems and distributed user interfaces

Surgical interventions are usually performed in an operation room; however, access to the information by the medical team members during the intervention is limited. While in conversations with the medical staff, we observed that they attach significant importance to the improvement of the information and communication direct access by queries during the process in real time. It is due to the fact that the procedure is rather slow and there is lack of interaction with the systems in the operation room. These systems can be integrated on the Cloud adding new functionalities to the existing systems the medical expedients are processed. Therefore, such a communication system needs to be built upon the information and interaction access specifically designed and developed to aid the medical specialists. Copyright 2014 ACM.

Understanding engagement with tangible user interfaces

This paper examines the issues surrounding the successful design and development of tangible technology for optimal engagement in playful activities. At present there is very little data on how, and in what contexts, tangible interactions with technology promote lasting engagement and immersion. The framework at the core of this paper has been designed to guide the effective design of tangible technology for immersive interaction. The paper investigates the relationship between tangible user interfaces (TUI) characteristics of representation and control, and immersive flow experiences produced through balancing skill and challenge in user interaction.

Using natural user interfaces for collaborative process modelling in virtual environments

Modelling business processes for analysis or redesign usually requires the collaboration of many stakeholders. These stakeholders may be spread across locations or even companies, making co-located collaboration costly and difficult to organize. Modern process modelling technologies support remote collaboration but lack support for visual cues used in co-located collaboration. Previously we presented a prototype 3D virtual world process modelling tool that supports a number of visual cues to facilitate remote collaborative process model creation and validation. However, the added complexity of having to navigate a virtual environment and using an avatar for communication made the tool difficult to use for novice users. We now present an evolved version of the technology that addresses these issues by providing natural user interfaces for non-verbal communication, navigation and model manipulation.