Dynamic response of underpasses for high-speed train lines

Underpasses are common in modern railway lines. Wildlife corridors and drainage conduits often fall into this category of partially buried structures. Their dynamic behavior has received far less attention than that of other structures such as bridges, but their large number makes their study an interesting challenge from the viewpoint of safety and cost savings. Here, we present a complete study of a culvert, including on-site measurements and numerical modeling. The studied structure belongs to the high-speed railway line linking Segovia and Valladolid in Spain. The line was opened to traffic in 2004. On-site measurements were performed for the structure by recording the dynamic response at selected points of the structure during the passage of high-speed trains at speeds ranging between 200 and 300 km/h. The measurements provide not only reference values suitable for model fitting, but also a good insight into the main features of the dynamic behavior of this structure. Finite element techniques were used to model the dynamic behavior of the structure and its key features. Special attention is paid to vertical accelerations, the values of which should be limited to avoid track instability according to Eurocode. This study furthers our understanding of the dynamic response of railway underpasses to train loads.

Measuring dynamic effects on underpasses of high-speed railway lines

Underpasses are common in modern railway lines. Wildlife corridors and drainage conduits often fall into this category of partially buried structures. Their dynamic behaviour has received far less attention than that of other structures such as bridges, but their large number makes their study an interesting challenge in order to achieve safe and cost-effective structures. As ballast operations are a key life cycle cost, and excessive vibrations increase the need of ballast regulation in order to ensure track geometry, special attention is paid to accelerations, the values of which should be limited to avoid track instability according to Eurocode. In this paper, the data obtained during on site measurements on culverts belonging to a Spanish high-speed train line are presented. A set of six rectangular-shaped, closed-frame underpasses were monitored under traffic loading. Acceleration records at different points of the structures are presented and discussed. They reveal a non-uniform dynamic response of the roof-slab, with the highest observed values below the occupied track. Also, they indicate that the dynamic response is important up to frequencies higher than those usually observed for standard simply supported bridges. Finally, they are used to obtain a heuristic rule to estimate acceleration levels on the roof-slab.

Fórmulas para el cálculo del factor de impacto de estructuras semienterradas en líneas de ferrocarril de alta velocidad = Dynamic factors for underpasses in high speed train lines

Los pasos inferiores son muy numerosos en las líneas de ferrocarril. Su comportamiento dinámico ha recibido mucha menos atención que el de otras estructuras como los puentes, pero su elevado número hace que su estudio sea económicamente relevante con vista a optimizar su forma, manteniendo la seguridad. El proyecto de puentes según el Eurocódigo incluye comprobaciones de estados límite de tensiones bajo carga dinámica. En el caso de pasos inferiores, las comprobaciones pueden resultar tan costosas como aquellas de puentes, pese a que su coste es mucho menor. Por tanto, se impone la búsqueda de unas reglas de cálculo simplificado que pongan en consonancia el coste de la estructura con el esfuerzo necesario para su proyecto. Este artículo propone un conjunto de reglas basadas en un estudio paramétrico = Underpasses are common in modern railway lines. Wildlife corridors and drainage conduits often fall into this category of partially buried structures. Their dynamic behavior has received far less attention than that of other structures such as bridges, but their large number makes their study an interesting challenge from the viewpoint of safety and cost savings. The bridge design rules in accordance with the Eurocode involve checks on stresses according to dynamic loading. In the case of underpasses, those checks may be as much as those for bridges. Therefore, simplified design rules may align the design effort with their cost. Such a set of rules may provide estimations of response parameters based on the key parameters influencing the result. This paper contains a proposal based on a parametric study.

Concessão Douro Litoral A32/IC2: passagens inferiores pré-fabricadas no sistema arco "Techspan" e muros ala de suporte de terras no sistema "Terra Armada": ponte sobre o rio Antuã: aplicação da tecnologia "Freyssinet"

O presente relatório visa apresentar o trabalho desenvolvido pelo estagiário na empresa Freyssinet – Terra Armada, S.A. (FTA). O relatório traduz o acompanhamento do estagiário na construção e aplicação da tecnologia Terra Armada em duas passagens inferiores, bem como o acompanhamento dos trabalhos efectuados pela empresa FTA no que diz respeito à aplicação da tecnologia Freyssinet na ponte sobre o rio Antuã, estando ambas as obras abordadas inseridas no Lote 8 – “A32/IC2 Oliveira de Azeméis/IP1 (S. Lourenço) trecho 2 e 3 – a cargo da empresa Alves Ribeiro S.A.. Com a construção dos trechos 2 e 3 da A32 surgiu a necessidade de se restabelecerem algumas ligações, o que fez com que após estudadas as soluções passíveis de serem utilizadas, se tivesse optado pela construção de túneis a céu aberto na execução dos restabelecimentos. Descreve-se neste documento a metodologia utilizada e as tecnologias patenteadas pela empresa Terra Armada, sendo estas compostas pelos Arcos “Techspan” e muros de ala executados com recurso à tecnologia “Terra Armada”. Em relação à ponte sobre o rio Antuã inserida no trecho 2 da empreitada de construção da A32, foi construída com recurso a cimbre auto-lançável e betonada in situ, havendo a necessidade de aplicação de tecnologias patenteadas pela Freyssinet no que diz respeito às actividades de pré-esforço, aparelhos de apoio nas ligações entre o tabuleiro e os pilares e juntas de dilatação na ligação do tabuleiro aos encontros. Apresentam-se os procedimentos de montagem e aplicação das tecnologias anteriormente referidas. No presente relatório estão descritos e explicados detalhadamente os trabalhos executados pela FTA, nomeadamente a aplicação da tecnologia “Terra Armada” no que diz respeito à construção das passagens inferiores, e a aplicação da tecnologia “Freyssinet” aplicada aquando da construção da ponte sobre o rio Antuã.

Direcção de obra – obras de arte auto-estrada Transmontana – área 3

Este relatório diz respeito ao trabalho desenvolvido em ambiente de estágio académico numa Empreitada compreendendo Obras de Arte Correntes e Obras de Arte Especiais inseridas em traçado actual do IP4 que está a ser transformado em Auto-Estrada. As Obras de Arte Correntes compreendem Passagens Superiores, Passagens Inferiores e Passagens superiores de Nó. As Obras de Arte Especiais compreendem duas Pontes com vãos distintos. Todas as Obras de Arte referidas neste relatório contemplam uma solução mista de betão armado “in situ” e tabuleiros com vigas e pré-lajes em betão pré-fabricado. Além da descrição de todas as actividades realizadas em betão armado “in situ”, desde as fundações até ao tabuleiro, descreve também a execução dos diversos tipos de trabalhos de acabamentos. Além das actividades de construção civil, é efectuada uma descrição das actividades a cujo processo de realização estão associados trabalhos de concepção e desenvolvimento, como é o caso dos cimbres. Este relatório faz uma descrição abrangente das funções da Direcção de Obra numa Empreitada de Obras de Arte, que para além da execução da obra, com todas as actividades que lhe são inerentes, compreende várias áreas funcionais que fazem parte de uma empresa de construção civil, como a área comercial, financeira, planeamento, aprovisionamento, controlo orçamental, gestão contratual, gestão de subempreitadas e gestão da qualidade, ambiente e segurança.

Interstate Highway Map Indicating Vertical Clearance, May 15, 2011

The State of Iowa [STATE] and the Iowa Department of Transportation [IDOT] hereby is claim any warranty of any kind, express or implied, in reference to the information contained herein. The STATE and the IDOT neither assume nor authorize any person to assume for the STATE or the IDOT any liability in connection with the information contained herein, and there are no oral agreements or warranties regarding the information contained herein. Each and every person is hereby notified that the vertical clearances specified herein are subject to change due to resurfacing, surface buckling, weather conditions, or any other event. It is the responsibility of each and every vehicle operator to ascertain whether sufficient ACTUAL vertical clearance exists to move his vehicle or motor vehicle between the roadway and the underpasses and bridges listed herein. The May 15 date on this map reflects the end of the update schedule for the previous calendar year. Any vertical clearance restrictions which could or may change AFTER this date will not be reflected on this map. For the latest information on vertical clearance restrictions call the Office of Motor Carrier Services in Ankeny, (515) 237-3264 or visit http://www.iowadot.gov/mvd/omcs.

Effect of Wildlife Highway Warning Reflectors on Deer-Vehicle Accident, December 1984

he number of deer-vehicle accidents in Iowa and around the country has steadily increased during the past 30 years. This i s basically due to: ( 1 ) increased volume of traffic; 12) an expanding network of hard surface roads, especially 4 lane interstates; and (3) a general increase in deer populations. Initidtion of a 55 MPH speed limit in 1974 and gasoline shortages in 1975 reduced deer-vehicle accident rates briefly, but since 1975, rates have continued to climb. Various methods of reducinq these accidents have been attempted in other states. These include: instal lation of rc?flective devlres, deer crossing signs, fencing, underpasses, clearing right--of--waysa,n d controlled hunting to reduce deer population s i z e . These methods have met with varying degrees of success, depending on animal behavior, deet- population fluctuations, method used, topoyr-aphy, road-side vegetation, traffic patterns, and highway configuration. This project was designed to evaluate a new ntethod of reducing deer-vehicle accidents. There are qenerally 4 important aspects of deer-vehicle accidents: danger to human l i f e , vehicle damage, loss of a valuable wildlife resource, and cost of processing accident reports. In !owe, during 1983, there were over 15,OOC) reported deer--vehicle accidents and probably many more that were not reported (Gladfelter 1984). The extent of human injury or death in Iowa i s not known, but studies in southern Michigan show that human injur ies occurred in about 4% of the deer-vehicle accidents (A1 lcn and MrCullough 1976). T h i s would indicate that in Iowa there could have been 200 human injury cases from deer-vehicle accidents i n 1983. These injuries usual 1 occur from secondary collisions when motorists try to avoid a deer on the highway, and hit some other object Vehicle darnaye from these accidents can into thousands of dollars because of the high speed involved and the size of the animal. The total amount of vehicle damage occurring in Iowa is unknown, but if the average vehicle damage was between $500-$800 per accident, estimated property damage would be between $2 1/2--$4 million annually. The value of deer lost in these accidents cannot be estimated, but recreational potential of this natural resource is surely diminished for hunters and wildlife enthusiasts. Also, there ir a great deal of money spent by governmental agencies for manpower to process accident reports and remove dead animals from highways.

Road Ecology: A Practitioner's Tale

Road Ecology is a relatively new sub-discipline of ecology that focuses on understanding the interactions between road systems and the natural environment. Wildlife crossings that allow animals to safely cross human-made barri-ers such as roads, are intended not only to reduce animal-vehicle collisions, but ideally to provide connectivity of habitat areas, combating habitat fragmentation. Wildlife mitigation strategies to improve the permeability of our infrastructure can include a combination of structures (overpasses/underpasses), at-grade crossings, fencing, animal-detection systems, and signage. One size does not fit all and solutions must be considered on a case-by-case ba-sis. Often, the feasibility of the preferred mitigation solution depends on a combination of variables including road geometrics, topography, traffic patterns, funding allocations, adjacent land use and landowner cooperation, the target wildlife species, their movement patterns, and habitat distribution. Joe and Deb will speak to the current road ecolo-gy practices in Montana and some real-world applications from the Department of Transportation.

Effective treatments of over and undercrossings for use by bicyclists, pedestrians and the handicapped. Final report.

Federal Highway Administration, Office of Research and Development, Washington, D.C.

Effective treatments of over and undercrossings for use by bicyclists, pedestrians, and the handicapped : a literature review /

Mode of access: Internet.

Effective treatments of over and undercrossings for use by bicyclists, pedestrians, and the handicapped /

Mode of access: Internet.