Desenvolvimento e validação de métodos analíticos para determinação do cloridrato de epinastina em comprimidos revestidos

O cloridrato de epinastina é um agente não sedativo, antagonista H1 da histamina, utilizado no tratamento da asma ou como anti-histamínico, comercializado no Brasil na forma farmacêutica comprimido revestido com o nome de Talerc ®. Embora, seja um medicamento amplamente comercializado não há referências relativas aos métodos de análise da forma farmacêutica. Este trabalho teve como objetivos o desenvolvimento e a validação de métodos analíticos para o controle de qualidade do cloridrato de epinastina nos comprimidos revestidos, bem como a realização de estudos preliminares de estabilidade térmica e de fotoestabilidade e determinação da cinética de reação do anti-histamínico em estudo.A análise qualitativa do cloridrato de epinastina foi realizada por ressonância magnética nuclear de próto n, determinação da faixa de fusão, espectrofotometria na região do infravermelho e do ultravioleta, cromatografia em camada delgada e por cromatografia a líquido de alta eficiência. Para análise quantitativa, foram validados os métodos por espectrofotometria na região do ultravioleta derivada de primeira ordem e por cromatografia a líquido de alta eficiência. A validação foi efetuada de acordo com as guias de validação disponíveis na literatura. No estudo preliminar de estabilidade térmica utilizou-se a forma farmacêutica submetida a temperatura de 80 °C por 10 dias. A fotoestabilidade foi realizada em câmara de luz ultravioleta de 254 nm por um período de 18 horas. Os métodos qualitativos foram úteis para identificação do cloridrato de epinastina. Os métodos quantitativos propostos foram validados de acordo com os parâmetros analíticos preconizados, podendo ser perfeitamente intercambiáveis. O estudo preliminar de estabilidade térmica não apresentou degradação da amostra nas condições de análise empregadas. O estudo de fotoestabilidade apresentou degradação intensa obedecendo uma cinética de reação de primeira ordem.

Simulação do comportamento espectral de redes de período longo em fibra óptica

Esta tese é dedicada às redes de período longo, LPG’s, em fibra óptica, escritas por exposição a radiação ultravioleta (UV) ou por exposição a descargas eléctricas, e às suas aplicações em comunicações ópticas e em sistemas sensores. Numa primeira fase estudaram-se os aspectos teóricos fundamentais para a compreensão das LPG, nomeadamente os dois modelos matemáticos propostos na literatura, para a transmissão espectral de uma LPG, o modelo de duas camadas e o modelo de três camadas. Em seguida, estudou-se o deslocamento do comprimento de onda ressonante perante mudanças de parâmetros externos. Aqui, verificou-se que para variações da temperatura no exterior da LPG, o deslocamento do comprimento de onda ressonante é linear. Por outro lado, para variações de índice de refracção exterior, verificou-se que à medida que o índice exterior se aproxima dos valores do índice de refracção da bainha, o comprimento de onda ressonante tende para valores mais baixos. Por último, realizou-se um estudo da transmissão espectral de duas aplicações que envolvem LPG’s, nomeadamente dois tipos de interferómetros e filtros ópticos. Numa segunda fase, foi desenvolvida uma ferramenta de simulação destes modelos, que permitia não só a obtenção dos espectros de transmissão das LPG’s mas também a obtenção das curvas de phase matching em função do período da rede e do comprimento de onda ressonante. A aplicação permitia também a obtenção das curvas do deslocamento do comprimento de onda ressonante, perante variações do índice de refracção exterior ou da temperatura. Para além disso, essa ferramenta realiza a simulação dos espectros de transmissão de filtros ópticos e de interferómetros de Michelson e de Mach-Zehnder construídos com base em LPG’s. A última fase do trabalho, a componente laboratorial, foi realizada na Unidade de Optoelectrónica e Sistemas Electrónicos do INESC Porto, onde foram construídos e testados os dispositivos estudados anteriormente, com o intuito de validar a aplicação desenvolvida. A ferramenta de simulação demonstrou ser capaz de simular de forma adequada os diversos aspectos do comportamento das LPG’s que foram estudados. A comparação dos resultados obtidos permitiu concluir que o modelo mais correcto para o estudo das LPG’s é o modelo de três camadas, o que está de acordo com o esperado.

Estética do apocalipse: (re) considerações acerca da (des) arborização urbana de Natal e seu contributo à saúde pública

This study intends to establish a relation between environmental degradation, particularly the devastation of the green canopy, and public health. Utilizing a mapping of the trees included in the researched area, each individual tree was analyzed according to its age, taxonomic listing, architecture, shape and size (determined by aesthetic/convenience reasons or deformed by pruning). Initially investigated were the covert reasons lying underneath the constant aggression against trees (which many times seem to contain elements of hatred and contempt) within the urban environment. In addition to that, the aspects concerning environmental modifications and the consequent impact on public health were also assessed. Two main problems promptly emerged as a result of the removal of trees: a) without a canopy to protect the areas, they became subject to winds directly blown from SW Africa and impregnated with aerosol partic les, which are common causes for respiratory disorders and, b) direct UV solar radiation, which causes some types of skin cancers and eye disorders. To reach such results, we studied the origins and formation of UV radiation induced cancers and searched for the UV radiation spectra of action, e.g., usual intensity and quantity reaching clear and shadowed spaces in a certain area and its consequences. In a second instance, we also searched for pertinent data resources in order to confirm the increase of skin cancer cases due to exposure to UV radiation and the relation between the destruction of the green canopy and the above mentioned problems. We believe that a few significant results have been achieved by this study, namely: the relation between a culture based on medieval beliefs and its consequences on the environment; how this culture exploits and deforms nature in pursuit of financial and psychological interests to a point of transforming the landscape into a copy of something devoid of any relation to latitude and altitude; and above all, the indifference concerning the alarming results carried by these modifications

Utilização da Berberina na Identificação dos Mastócitos do Molusco Anomalocardia brasiliana

Berberine is an alkaloid used as a fluorochrome in the identification of heparin and DNA. Enerback, 1974, described the technique used until today to study granules rich in heparin of vertebrate mast cells. Santos et al., 2003, studied mast cells of the mollusk Anomalocardia brasiliana using biochemical and histological analysis. This work used the fluorescent dye berberine technique to improve characterization of these cells. Mollusk organs (ctenidium and mantle) were processed with routine histological techniques. Tissue sections were treated with berberine 0,02% in redistilled water acidified to pH 4, by the addition of citric acid for 20 minutes. The visualization was made through fluorescence microscopy with ultraviolet region emission. The mast cell fluorescence had a strong yellow color, where cell nuclei appeared more greenish. This result was very similar to the ones reported before. Mast cells are location at the epithelium surface is the same in both organs, mantle and ctenidium. The fluorescence was easily observed in the granules. Therefore, this technique showed to be good and sensitive to study mast cell of invertebrates

Papel da proteína de reparo XPC na regulação das proteínas de reparo APE1, OGG1 e PARP-1 em células humanas e de camundongos

studies using UV as a source of DNA damage. However, even though unrepaired UV-induced DNA damages are related to mutagenesis, cell death and tumorigenesis, they do not explain phenotypes such as neurodegeneration and internal tumors observed in patients with syndromes like Xeroderma Pigmentosum (XP) and Cockayne Syndrome (CS) that are associated with NER deficiency. Recent evidences point to a role of NER in the repair of 8-oxodG, a typical substrate of Base Excision Repair (BER). Since deficiencies in BER result in genomic instability, neurodegenerative diseases and cancer, it was investigated in this research the impact of XPC deficiency on BER functions in human cells. It was analyzed both the expression and the cellular localization of APE1, OGG1 e PARP-1, the mainly BER enzymes, in different NER-deficient human fibroblasts. The endogenous levels of these enzymes are reduced in XPC deficient cells. Surprisingly, XP-C fibroblasts were more resistant to oxidative agents than the other NER deficient fibroblasts, despite presenting the highest of 8-oxodG. Furthermore, subtle changes in the nuclear and mitochondrial localization of APE1 were detected in XP-C fibroblasts. To confirm the impact of XPC deficiency in the regulation of APE1 and OGG1 expression and activity, we constructed a XPC-complemented cell line. Although the XPC complementation was only partial, we found that XPC-complemented cells presented increased levels of OGG1 than XPC-deficient cells. The extracts from XPC-complemented cells also presented an elevated OGG1 enzimatic activity. However, it was not observed changes in APE1 expression and activity in the XPCcomplemented cells. In addition, we found that full-length APE1 (37 kDa) and OGG1- α are in the mitochondria of XPC-deficient fibroblasts and XPC-complemented fibroblasts before and after induction of oxidative stress. On the other hand, the expression of APE1 and PARP-1 are not altered in brain and liver of XPC knockout mice. However, XPC deficiency changed the APE1 localization in hypoccampus and hypothalamus. We also observed a physical interaction between XPC and APE1 proteins in human cells. In conclusion, the data suggest that XPC protein has a role in the regulation of OGG1 expression and activity in human cells and is involved mainly in the regulation of APE1 localization in mice. Aditionally, the response of NER deficient cells under oxidative stress may not be only associated to the NER deficiency per se, but it may include the new functions of NER enzymes in regulation of expression and cell localization of BER proteins

Utilização de matérias primas vegetais para aplicabilidade como inibidores de corrosão

In the search for products that act as corrosion inhibitors and do not cause environmental, impact the use of plant extracts as corrosion inhibitors is becoming a promising alternative. In this work the efficiency of polar extracts (ethanol extracts) obtained from the plants Anacardium occidentale Linn (AO) and Phyllantus amarus Schum. & Thonn (PA) as corrosion inhibitors were evaluated in different concentrations. For that AO and PA extracts were solubilized in the microemulsion systems (SME) containing saponified coconut oil as surfactant (SME -OCS and SME-OCS-1) in saline (NaCl 3,5 %) solution, which was also used as electrolyte. Both SME-OCS and SME-OCS-1 were characterized by surface tension and viscosity methods showing a Newtonian fluid behavior. The SME-OCS and SME-OCS-1 systems satisfactorily solubilized the polar extracts AO and PA with measurements carried out by ultraviolet spectroscopy. The measurements of corrosion inhibition efficiencies were performed by the electrochemical linear polarization resistance (LPR) technique as well as weight loss, on the surface of AISI 1020 carbon steel. The maximum corrosion inhibition efficiencies were determined by extrapolation of Tafel plots, showing the following values: 95,6 % for the system SME-OCS-AO, 98,9 % for the system SME-OCS-AO-1 and 93,4 % for the system SME-OCS-PA

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Síntese hidrotérmica assistida por micro-ondas de tiO2, e aplicação em nanocompósito

In recent decades have seen a sharp growth in the study area of nanoscience and nanotechnology and is included in this area, the study of nanocomposites with self-cleaning properties. Since titanium dioxide (TiO2) has high photocatalytic activity and also antimicrobial, self-cleaning surfaces in your application has been explored. In this study a comparison was made between two synthesis routes to obtain TiO2 nanoparticles by hydrothermal method assisted by microwave. And after analysis of XRD and SEM was considered the best material for use in nanocomposites. It was deposited nanocomposite film of poly (dimethyl siloxane) (PDMS) with 0.5, 1, 1.5 and 2% by weight of nanoparticles of titanium dioxide (TiO2) by the spraying method. The nanocomposite was diluted with hexane and the suspension was deposited onto glass substrate, followed by curing in an oven with forced air circulation. The photocatalytic activity of the nanocomposite impregnated with methylene blue was evaluated by UV- vis spectroscopy from the intensity variation of absorption main peak at 660nm with time of exposure to the UV chamber. Changes in the contact angle and microhardness were analyzed before and after UV aging test. The effect of ultraviolet radiation on the chemical structure of the PDMS matrix was evaluated by spectrophotometry Fourier transform infrared (FTIR).The results indicated that the addition of TiO2 nanoparticles in the coating PDMS gave high photocatalytic activity in the decomposition of methylene blue, an important characteristic for the development of self-cleaning coatings

Entomofauna visitante de Stenolobium stans (Juss.) Seem (Bignoniaceae), durante seu período de floração

Realizaram-se estudos sobre as formas de reprodução de Stenolobium stans (Juss.) Seem e determinou-se a diversidade, freqüência e constância dos insetos visitantes nas flores em diferentes horas, durante quatro anos. As flores de S. stans começam a se abrir nas primeiras horas do dia entre 5 e 6h, com duração de 3 a 8h. Quando o estigma está receptivo, o pólen tem 90% de viabilidade. Além do pólen, a flor possui outros atrativos para os insetos visitantes, ou seja, os osmóforos responsáveis pelo odor adocicado, luz ultravioleta refletida e néctar com 25% de açúcar. A planta é autocompatível, reproduzindo-se por autogamia, geitonogamia ou xenogamia o que determina a necessidade de polinizadores externos e justifica ser a espécie vegetal em estudo uma séria invasora de campos e pastagens. Grande diversidade de insetos foi verificada visitando as flores, com predominância das abelhas. Os polinizadores foram Centris collaris Lepeletier, Bombus morio (Swederus), Eulaema nigrita Lepeletier e Epicharis sp. No meio rural houve menor incidência das espécies nativas do que no ambiente urbano, com predominância da abelha introduzida Apis mellifera L. Fatores ambientais, principalmente a temperatura, luminosidade, umidade relativa do ar e velocidade do vento, influenciaram a atividade forrageadora dos insetos.

Sexagem de embriões bovinos fecundados in vitro pela técnica de PCR multiplex

Neste trabalho, a técnica de PCR (polymerase chain reaction) foi utilizada para a sexagem de 92 embriões bovinos fertilizados in vitro. Os embriões originaram-se de fertilização in vitro de oócitos aspirados de ovários de fêmeas bovinas, provenientes de abatedouros comerciais. Os oócitos foram maturados, fertilizados e cultivados até o estádio de blastocisto. Os embriões foram lavados em solução de PBS, transferidos para tubos de polipropileno contendo água ultrapura, e imediatamente congelados a -196ºC. Os embriões foram descongelados sobre isopor contendo gelo picado e tratados com proteinase K. Para a reação de PCR, utilizaram-se alíquotas de 34 µl de cada tudo, onde foram acrescidos dois pares de primers, seqüência BC1.2 e seqüência satélite 1.715, desoxinucleotídeos, MgCl2, tampão PCR 10X, TaqDNA polimerase e água, em um volume final de 50 µl. As amostras foram amplificadas e a eletroforese realizada em gel de poliacrilamida a 8%. Os géis foram corados com solução de brometo de etídio e analisados em transiluminador de luz ultravioleta. Um índice de 93,47% de amplificação foi atingido, com 41 embriões (47,67%) machos e 45 (52,32%) embriões fêmeas. O uso de gel de poliacrilamida a 8% foi eficaz na separação de fragmentos de DNA muito próximos.

Conservação pós-colheita de pêssego com o uso da refrigeração e da irradiação

Avaliaram-se os efeitos da irradiação ultravioleta (254nm, UV-C) na conservação de pêssegos cultivar Douradão, aos 5; 10; 15 e 20 dias de armazenamento com o uso da refrigeração (0ºc e 75-85% de uR). os tratamentos foram: controle (0 minuto de exposição - 0 kj. m -2); T1 (5 minutos -1,85 kj. m -2); T2 (10 minutos - 3,71 kj. m -2); (15 minutos - 5,55 kj. m -2), e T4 (20 minutos - 7,52 kj. m -2). o delineamento experimental foi um esquema inteiramente casualizado, com 5 tempos de armazenamento: (0; 5; 10; 15 e 20 dias), com 3 repetições e 2 frutos por unidade experimental. os parâmetros avaliados foram: sólidos solúveis (SS); acidez titulável (AT); relação SS/AT Ratio; pH; firmeza da polpa, respiração e vida útil. Os pêssegos não apresentaram alteração do pH e da At durante o tempo de armazenamento.os melhores valores de SS e firmeza da polpa foram obtidos com o tratamento T4. A taxa respiratória foi menor em T4. As alterações de SS, firmeza da polpa e respiração apresentadas pelos frutos do tratamento T4 foram menores que aquelas dos demais tratamentos, demonstrando a eficácia do uso da irradiação ultravioleta.

Efeitos do envelhecimento ambiental acelerado em compósitos poliméricos

The advantages of the use of vegetable fibers on the synthetic fibers, such as glass fibers, in the reinforcements in composites are: low cost, low density, good tenacity, good thermal properties and reduced use of instruments for their treatment or processing. However, problems related to poor performance of some mechanical natural fibers, have hindered its direct use in structural elements. In this sense, the emergence of alternative materials such as hybrids composites, involving natural and synthetic fibers, has been encouraged by seeking to improve the performance of structural composites based only on natural fibers. The differences between the physical, chemical and mechanical properties of these fibers, especially facing the adverse environmental conditions such as the presence of moisture and ultraviolet radiation, is also becoming a concern in the final response of these composites. This piece of research presents a comparative study of the strength and stiffness between two composite, both of ortoftalic polyester matrix, one reinforced with fibers of glass-E (CV) and other hybrid reinforced with natural fibers of curauá and fiberglass-E (CH). All the comparative study is based on the influence of exposure to UV rays and steam heated water in composites, simulating the aging environment. The conditions for the tests are accelerated through the use of the aging chamber. The composites will be evaluated through tests of uniaxial static mechanical traction and bending on three points. The composite of glass fiber and hybrid manufacturing industry are using the rolling manual (hand lay-up) and have been developed in the form of composites. All were designed to meet possible structural applications such as tanks and pipes. The reinforcements used in composites were in the forms of short fiber glass-E quilts (450g/m2 - 5cm) of continuous wires and fuses (whose title was of 0.9 dtex) for the curauá fibers. The results clearly show the influence of aging on the environmental mechanical performance of the composite CV and CH. The issues concerning the final characteristics of the fracture for all types of cargoes studied were also analyzed

Efeitos da radiação uv, temperatura e vapor aquecido nos compósitos poliméricos: monitoramento, instabilidade estrutural e fratura

The application of composite materials and in particular the fiber-reinforced plastics (FRP) has gradually conquered space from the so called conventional materials. However, challenges have arisen when their application occurs in equipment and mechanical structures which will be exposed to harsh environmental conditions, especially when there is the influence of environmental degradation due to temperature, UV radiation and moisture in the mechanical performance of these structures, causing irreversible structural damage such as loss of dimensional stability, interfacial degradation, loss of mass, loss of structural properties and changes in the damage mechanism. In this context, the objective of this thesis is the development of a process for monitoring and modeling structural degradation, and the study of the physical and mechanical properties in FRP when in the presence of adverse environmental conditions (ageing). The mechanism of ageing is characterized by controlled environmental conditions of heated steam and ultraviolet radiation. For the research, it was necessary to develop three polymer composites. The first was a lamina of polyester resin reinforced with a short glass-E fiber mat (representing the layer exposed to ageing), and the other two were laminates, both of seven layers of reinforcement, one being made up only of short fibers of glass-E, and the other a hybrid type reinforced with fibers of glass-E/ fibers of curaua. It should be noted that the two laminates have the lamina of short glass-E fibers as a layer of the ageing process incidence. The specimens were removed from the composites mentioned and submitted to environmental ageing accelerated by an ageing chamber. To study the monitoring and modeling of degradation, the ageing cycles to which the lamina was exposed were: alternating cycles of UV radiation and heated steam, a cycle only of UV radiation and a cycle only of heated steam, for a period defined by norm. The laminates have already undergone only the alternating cycle of UV and heated steam. At the end of the exposure period the specimens were subjected to a structural stability assessment by means of the developed measurement of thickness variation technique (MTVT) and the measurement of mass variation technique (MMVT). Then they were subjected to the mechanical tests of uniaxial tension for the lamina and all the laminates, besides the bending test on three points for the laminates. This study was followed by characterization of the fracture and the surface degradation. Finally, a model was developed for the composites called Ageing Zone Diagram (AZD) for monitoring and predicting the tensile strength after the ageing processes. From the results it was observed that the process of degradation occurs Abstract Raimundo Nonato Barbosa Felipe xiv differently for each composite studied, although all were affected in certain way and that the most aggressive ageing process was that of UV radiation, and that the hybrid laminated fibers of glass-E/curaua composite was most affected in its mechanical properties

Envelhecimento ambiental em compósitos poliméricos à base de tecidos de reforços híbridos

The utilization of synthetic fibers for plastic reinforcement is more and more frequent and this growing interest requires that their mechanic behavior under the most variable conditions of structural applications be known. The use of such materials in the open and exposed to the elements is one of them. In this case, it becomes extremely necessary to study their mechanical properties (strength, stiffness) and the mechanism of fracture by which the environment aging them out. In order to do that, the material must be submitted to hot steam and ultraviolet radiation exposure cycles, according to periods of time determined by the norms. This study proposal deals with the investigation of accelerated environmental aging in two laminated polymeric composites reinforced by hybrid woven made up of synthetic fibers. The configurations of the laminated composites are defined as: one laminate reinforced with hybrid woven of glass fibers/E and Kevlar fibers/49 (LHVK) and the other laminate is reinforced with hybrid tissue of glass fibers/E and of carbon fibers AS4 (LHVC). The woven are plane and bidirectional. Both laminates are impregnated with a thermofix resin called Derakane 470-300 Epoxy Vinyl-Ester and they form a total of four layers. The laminates were industrially manufactured and were made through the process of hand-lay-up. Comparative analyses were carried out between their mechanical properties by submitting specimen to uniaxial loading tractions and three-point flexion. The specimen were tested both from their original state, that is, without being environmentally aging out, and after environmental aging. This last state was reached by using the environmental aging chamber

Desenvolvimento de um reator fotoquímico aplicável no tratamento de efluentes fenólicos presentes na indústria do petróleo

With water pollution increment at the last years, so many progresses in researches about treatment of contaminated waters have been developed. In wastewaters containing highly toxic organic compounds, which the biological treatment cannot be applied, the Advanced Oxidation Processes (AOP) is an alternative for degradation of nonbiodegradable and toxic organic substances, because theses processes are generation of hydroxyl radical based on, a highly reactivate substance, with ability to degradate practically all classes of organic compounds. In general, the AOP request use of special ultraviolet (UV) lamps into the reactors. These lamps present a high electric power demand, consisting one of the largest problems for the application of these processes in industrial scale. This work involves the development of a new photochemistry reactor composed of 12 low cost black light fluorescent lamps (SYLVANIA, black light, 40 W) as UV radiation source. The studied process was the photo-Fenton system, a combination of ferrous ions, hydrogen peroxide, and UV radiation, it has been employed for the degradation of a synthetic wastewater containing phenol as pollutant model, one of the main pollutants in the petroleum industry. Preliminary experiments were carrier on to estimate operational conditions of the reactor, besides the effects of the intensity of radiation source and lamp distribution into the reactor. Samples were collected during the experiments and analyzed for determining to dissolved organic carbon (DOC) content, using a TOC analyzer Shimadzu 5000A. The High Performance Liquid Chromatography (HPLC) was also used for identification of the cathecol and hydroquinone formed during the degradation process of the phenol. The actinometry indicated 9,06⋅1018 foton⋅s-1 of photons flow, for 12 actived lamps. A factorial experimental design was elaborated which it was possible to evaluate the influence of the reactants concentration (Fe2+ and H2O2) and to determine the most favorable experimental conditions ([Fe2+] = 1,6 mM and [H2O2] = 150,5 mM). It was verified the increase of ferrous ions concentration is favorable to process until reaching a limit when the increase of ferrous ions presents a negative effect. The H2O2 exhibited a positive effect, however, in high concentrations, reaching a maximum ratio degradation. The mathematical modeling of the process was accomplished using the artificial neural network technique