Impacto do pH final na maciez do músculo Longissimus lumborum de animais zebuínos: mudanças estruturais de proteínas da carne crua e cozida durante a maturação

O objetivo do presente trabalho foi determinar a força de cisalhamento Warner-Bratzler do músculo Longissimus lumborum de animais zebuínos machos inteiros (Bos indicus) durante o período de maturação, nas faixas de pH final (pHf 48 horas post mortem) normal (pH entre 5,5 e 5,8) e anormal (pH entre 5,81 e 6,19) e temperaturas internas de cozimento. Concomitante com a avaliação de força de cisalhamento, foram avaliadas também a degradação da desmina e troponina T, o comprimento do sarcômero, o teor de colágeno total e solúvel, as temperaturas máximas de desnaturação das proteínas e a morfologia geral de agregação das fibras do músculo no cozimento. A degradação da desmina e troponina T foi maior no pHf normal, aparecendo produtos de degradação a partir do dia 7 nessa faixa de pHf. Não houve diferenças nos valores de comprimento do sarcômero, descartando-se assim, a contribuição desse parâmetro sobre a temperatura máxima de desnaturação (Tmáx) das proteínas, determinada utilizando calorímetro exploratório diferencial (DSC). Similarmente, não foram encontradas diferenças para os teores de colágeno total e solúvel, e os valores de colágeno total foram baixos, sugerindo que sua contribuição na segunda transição térmica e nos valores de força de cisalhamento foi mínima. As Tmáx1 e Tmáx2, correspondentes à desnaturação da meromiosina leve e pesada, respectivamente, foram menores no pHf normal, mas o efeito foi maior para a Tmáx2. A Tmáx3 da actina e titina aumentou até 14 dias post mortem na faixa de pHf normal, e posteriormente diminuiu significativamente após 21 dias, sugerindo possível degradação dessas proteínas nesse período de dias. Não foram encontradas diferenças nos valores de Tmáx no pHf anormal, em todos os dias post mortem, o que sugere a contribuição de um possível mecanismo de proteção que estabiliza as miofibrilas no aquecimento. Houve maior agregação das fibras do músculo no pHf normal nas temperaturas internas de cozimento de 65 e 80°C, provavelmente devido à maior desnaturação térmica das miofibrilas. Os valores de força de cisalhamento foram maiores com o aumento da temperatura interna de cozimento, devido ao aumento da desnaturação térmica das miofibrilas do músculo. Independente da temperatura interna de cozimento, os valores de força de cisalhamento foram altos em quase todos os dias post mortem para ambas as faixas de pHf, o que sugere a necessidade de utilizar métodos físicos ou químicos para aumentar a maciez do músculo Longissimus lumborum de animais zebuínos.

Beef carcasses with larger eye muscle areas, lower ossification scores and improved nutrition have a lower incidence of dark cutting

This study evaluated the effect of eye muscle area (EMA), ossification, carcass weight, marbling and rib fat depth on the incidence of dark cutting (pH u > 5.7) using routinely collected Meat Standards Australia (MSA) data. Data was obtained from 204,072 carcasses at a Western Australian processor between 2002 and 2008. Binomial data of pH u compliance was analysed using a logit model in a Bayesian framework. Increasing eye muscle area from 40 to 80 cm 2, increased pH u compliance by around 14% (P < 0.001) in carcasses less than 350 kg. As carcass weight increased from 150 kg to 220 kg, compliance increased by 13% (P < 0.001) and younger cattle with lower ossification were also 7% more compliant (P < 0.001). As rib fat depth increased from 0 to 20 mm, pH u compliance increased by around 10% (P < 0.001) yet marbling had no effect on dark cutting. Increasing musculature and growth combined with good nutrition will minimise dark cutting beef in Australia.

Properties of intramuscular connective tissue in pork and poultry with reference to weakening of structure

The most common connective tissue research in meat science has been conducted on the properties of intramuscular connective tissue (IMCT) in connection with eating quality of meat. From the chemical and physical properties of meat, researchers have concluded that meat from animals younger than physiological maturity is the most tender. In pork and poultry, different challenges have been raised: the structure of cooked meat has weakened. In extreme cases raw porcine M. semimembranosus (SM) and in most turkey M. pectoralis superficialis (PS) can be peeled off in strips along the perimysium which surrounds the muscle fibre bundles (destructured meat), and when cooked, the slices disintegrate. Raw chicken meat is generally very soft and when cooked, it can even be mushy. The overall aim of this thesis was to study the thermal properties of IMCT in porcine SM in order to see if these properties were in association with destructured meat in pork and to characterise IMCT in poultry PS. First a 'baseline' study to characterise the thermal stability of IMCT in light coloured (SM and M. longissimus dorsi in pigs and PS in poultry) and dark coloured (M. infraspinatus in pigs and a combination of M. quadriceps femoris and M. iliotibialis lateralis in poultry) muscles was necessary. Thereafter, it was investigated whether the properties of muscle fibres differed in destructured and normal porcine muscles. Collagen content and also solubility of dark coloured muscles were higher than in light coloured muscles in pork and poultry. Collagen solubility was especially high in chicken muscles, approx. 30 %, in comparison to porcine and turkey muscles. However, collagen content and solubility were similar in destructured and normal porcine SM muscles. Thermal shrinkage of IMCT occurred at approximately 65 °C in pork and poultry. It occurred at lower temperature in light coloured muscles than in dark coloured muscles, although the difference was not always significant. The onset and peak temperatures of thermal shrinkage of IMCT were lower in destructured than in normal SM muscles, when the IMCT from SM muscles exhibiting ten lowest and ten highest ultimate pH values were investigated (onset: 59.4 °C vs. 60.7 °C, peak: 64.9 °C vs. 65.7 °C). As the destructured meat was paler than normal meat, the PSE (pale, soft, exudative) phenomenon could not be ruled out. The muscle fibre cross sectional area (CSA), the number of capillaries per muscle fibre CSA and per fibre and sarcomere length were similar in destructured and normal SM muscles. Drip loss was clearly higher in destructured than in normal SM muscles. In conclusion, collagen content and solubility and thermal shrinkage temperature vary between porcine and poultry muscles. One feature in the IMCT could not be directly associated with weakening of the meat structure. Poultry breast meat is very homogenous within the species.

Glycogen debranching enzyme activity in the muscles of meat producing animals

Muscle glycogen exists in two forms: low molecular weight pro-glycogen and high molecular weight macro-glycogen. The degradation of glycogen to glucose 1 phosphate and free glucose is catalysed by glycogen phosphorylase together with glycogen debranching enzyme (GDE). The process in which glycogen is broken down via anaerobic pathways to lactate, results in the acidification of the muscles and has a great influence on meat quality. Thus, the overall aim of this thesis was to characterise the post mortem action of GDE in muscles of meat production animals (pigs, cattle and chickens). Interest was focused on the differences in GDE activity between fast twitch glycolytic muscles and slow twitch oxidative muscles. The effects of pH, temperature, RN genotype (PRKAG3 gene), and of time post mortem on GDE activity were also investigated. This thesis showed that there are differences in GDE activity between animal species and between different muscles of an animal. It was shown that in pigs and cattle, higher GDE activity and phosphorylase activity exists in the fast twitch glycolytic muscles than in slow twitch oxidative muscles of the same animal. Thus, the high activity of these enzymes enables a faster rate of glycogenolysis in glycolytic M. longissimus dorsi compared to oxidative M. masseter. In chicken muscles, the GDE activity was low compared to pig or cattle muscles. Furthermore, the GDE activity in the glycolytic M. pectoralis superficialis was lower than in more oxidative M. quadriceps femoris despite the high phosphorylase activity in the former. The relative ratios between phosphorylase and GDE activity were higher in fast twitch glycolytic muscles than in slow twitch oxidative muscles of all studied animals. This suggests that the relatively low GDE activity compared to the phosphorylase activity in fast twitch glycolytic muscles may be a protection mechanism in living muscle against a very fast pH decrease. Chilling significantly decreased GDE activity and below 15 C porcine GDE was almost inactive. The effect of pH on GDE activity was only minor at the range normally found in post mortem muscles (pH 7.4 to 5.0). The GDE activity remained level for several hours after slaughter. During the first hours post mortem, GDE activity was similar in RN- carrier pigs and in wild type pigs. However, the GDE activity declined faster in M. longissimus dorsi from wild type pigs than in the RN carrier pigs, the difference between genotypes was significant after 24 h post mortem. Pro-glycogen and macro-glycogen contents were higher, pH decrease was faster and ultimate pH was lower in RN- carrier pigs than in wild type pigs. In the RN- carriers, the prolonged high GDE activity level may enable an extended pH decrease and lower ultimate pH in their muscles. In conclusion, GDE is not the main factor determining the rate or the extent of post mortem glycogenolysis, but under certain conditions, such as in very fast chilling, the inhibition of GDE activity in meat may reduce the rate of pH decrease and result in higher ultimate pH. The rate and extent of pH decrease affects several meat quality traits.

Incidence and physical properties of PSE chicken meat in a commercial processing plant

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Growth, carcass and meat quality traits of straightbred and crossbred Botucatu rabbits

The objective was to evaluate the effects of genetic group and age on growth, carcass, and meat traits of rabbits. A total of 144 straightbred Botucatu and White German Giant x Botucatu crossbred rabbits were involved. Rabbits were weaned at 35 d and sequentially, slaughtered, four per genetic group x sex combination, at: 42, 49, 56, 63, 70, 77, 84 and 91 d. A 2x2 factorial arrangement was employed in a completely randomized design with repeated measures for growth traits, and a split-plot for carcass and meat traits. Crossbred rabbits were heavier (2032 vs. 1962 g; P < 0.01), consumed more feed (143.5 vs. 131.0 g/d; P < 0.01), and presented higher slaughter weight (2169 vs. 2093 g, P=0.02) and dressing percentage (59.0 vs. 58.2%; P=0.07) than straightbreds throughout the experiment. No difference between genetic groups was detected for feed conversion and empty gastrointestinal weight corrected for slaughter weight (SW). Crossbreds showed higher skin weight (308.2 vs. 299.7 g, P = 0.06) and distal parts of leg weight (75.7 vs. 71.4 g; P < 0.01), both corrected for SW. No genetic group effect was detected on dissectible fat and hind part weights. Chilled commercial carcass (1284 vs. 1229 g: P=0.02), chilled reference carcass (1036 vs. 1000 g, P=0.06), fore part (297.9 vs. 283.3 g; P=0.01) and loin (308.7 vs. 295.5 g; P=0.05) were heavier in crossbreds than in straightbreds, but these differences were attributed to differences in SW. Uncorrected weights of head, kidneys, liver and thoracic viscera were higher in the crossbred group, but only head (116.6 vs. 113.6 g; P=0.06) and thoracic viscera (30.4 vs. 28.6 g; P=0.01) were, in fact, proportionately heavier in crossbreds than in straightbreds. No effect of genetic group was detected on meat to bone ratio, muscle ultimate pH and chemical composition of the Longissimus dorsi muscle. All traits, except for ash and fat contents of the Longissimus muscle, showed age effects (P < 0.01). Crossbreeding may be recommended for the production of whole commercial carcasses, but it is not clearly advantageous for the production of retail cuts. Slaughter should take place between 63 and 70 d of age for both genetic groups.

Growth performance and meat quality of heifers receiving different forms of soybean oil in the rumen

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do manejo pré-abate de bovinos no bem–estar e qualidade da carcaça

Pós-graduação em Zootecnia - FCAV

Somatotropina bovina (rbST) recombinante sobre as características físico-químicas da carne de cabritos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The efficacy of a vitamin D-3 metabolite for improving the myofibrillar tenderness of meat from Bos indicus cattle

The influence of a once only administration of a metabolite of vitamin D-3 (HY center dot D-(R)-25-hydroxy vitamin D-3) on myofibrillar meat tenderness in Australian Brahman cattle was studied. Ninety-six Brahman steers of three phenotypes (indo-Brazil, US and US/European) and with two previous hormonal growth promotant (HGP) histories (implanted or not implanted with Compudose((R))) were fed a standard feedlot ration for 70 d. Treatment groups of 24 steers were offered daily 10 g/head HY center dot D-(R) (125 mg 25-hydroxyvitamin D-3) for 6, 4, or 2 d before slaughter. One other group of 24 steers was given the basal diet without HY center dot D-(R). Feed lot performance, blood and muscle samples and carcass quality data were collected at slaughter. Calcium, magnesium, potassium, sodium, iron and Vitamin D-3 metabolites were measured in plasma and longissimus dorsi muscle. Warner-Bratzler (WB) shear force (peak force, initial yield) and other objective meat quality measurements were made on the longissimus dorsi muscle of each steer after ageing for 1, 7 and 14 d post-mortem at 0-2 degrees C. There were no significant effects of HY center dot D-(R) supplements on average daily gain (ADG, 1.28-1.45 kg/d) over the experimental period. HY center dot D-(R) supplements given 6 d prior to slaughter resulted in significantly higher (P < 0.05) initial yield values compared to supplements given 2 d prior to slaughter. Supplementation had no significant effect on meat colour, ultimate pH, sarcomere length, cooking loss, instron compression or peak force. There was a significant treatment (HY center dot D-(R)) by phenotype/HGP interaction for peak force (P = 0.028), in which Indo-Brazil steers without previous HGP treatment responded positively (increased tenderness) to HY center dot D-(R) supplements at 2 d when compared with Indo-Brazil steers previously given HGP. There were no significant effects of treatment on other phenotypes. HY center dot D-(R) supplements did not affect muscle or plasma concentrations of calcium, potassium or sodium, but did significantly decrease plasma magnesium and iron concentrations when given 2 d before slaughter. There were no detectable amounts of 25-hydroxyvitamin D-3 in the blood or muscle of any cattle at slaughter. (c) 2005 Elsevier Ltd. All rights reserved.

Ultimate shear strength of LiteSteel beams

This paper presents the details of an investigation on the shear behaviour of a recently developed, cold-formed steel beam known as LiteSteel Beam (LSB).The LSB section has a unique shape of a channel beam with two rectangular hollow flanges and is produced by a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. In the present investigation, a series of numerical analyses based on three-dimensional finite element modeling and an experimental study were carried out to investigate the shear behaviour of 10 different LSB sections. It was found that the current design rules in cold-formed steel structures design codes are very conservative for the shear design of LiteSteel beams. Significant improvements to web shear buckling occurred due to the presence of rectangular hollow flanges while considerable post-buckling strength was also observed. Therefore the design rules were further modified to include the available post-buckling strength. Suitable design rules were also developed under the direct strength method format. This paper presents the details of this investigation and the results including the final design rules for the shear capacity of LSBs. It also presents new shear strength formulae for lipped channel beams based on the current design equations for shear strength given in AISI (2007) using the same approach used for LSBs.

The ultra-low friction of the articular surface is pH-dependent and is built on a hydrophobic underlay including a hypothesis on joint lubrication mechanism

In this study, the influence of pH on interfacial energy distributed over the phospholipids-bilayer surface model and the effect of hydrophobicity on coefficient of friction (f) were investigated by using microelectrophoresis. An important clinical implication of deficiency in hydrophobicity is the loss of phospholipids that is readily observed in osteoarthritis joints. This paper establishes the influence of pH on interfacial energy upon an increase f, which might be associated with a decrease of hydrophobicity of the articular surface.