Nano zinc oxide for UV protection of textiles

This paper describes the effect on the fading of dyed polyester fabrics in artificial sunlight, when the Ultra Violet (UV) component of the radiation was blocked by coating the fabric with zinc oxide nanoparticles, dispersed in an acrylic polymer. Zinc oxide is photoactive and generates superoxide and hydroxyl radicals (Reactive Oxygen Species; ROS) when irradiated with UV in the presence of oxygen and water. The results for the four dyes studied show that different dye chromophores interact differently with ROS. Selection of dyes with anti oxidant properties or addition of other anti oxidants may reduce the adverse effects of ROS

Polymer coatings containing nano particles of zinc oxide for the UV protection of dyed polyester fabrics

The useful life of many outdoor textile products is limited by degradation caused by exposure to sunlight, in particular by the ultra violet component (below 400 nm). The degradation results in fading of colours and also loss of physical properties, such as tear strength and abrasion resistance. Degradation can be decreased with UV absorbers, often used in conjunction with antioxidants or free radical quenchers. The protection afforded by these organic compounds is, however, limited as they are ultimately destroyed by the UV radiation they absorb.
An alternative approach is to coat fabrics with a polymer containing an inorganic UV absorber, such as zinc oxide. The inherent stability of zinc oxide would be expected to provide a protective effect over a much longer period than can be achieved with an organic UV absorber. A possible disadvantage of zinc oxide when applied in a polymer film is that absorption and scattering of visible light can produce hazy films and, hence, an unacceptable change in fabric appearance.
This poster paper examines the possibility of using nano particles of zinc oxide dispersed in acrylic polymers for protecting dyed polyester fabrics against sunlight fading. Factors affecting both UV absorbance and film clarity will be discussed. The possibility will also be examined that the protective effect may be reduced in some circumstances by reactive oxygen species, generated by the interaction of UV with zinc oxide in the presence of air and water.

Reduction of the photocatalytic activity of ZnO nanoparticles for UV protection applications

The detrimental effects of UV radiation are having a significant impact on our life and environment. The development of effective UV shielding agents is therefore of great importance to our society. ZnO nanoparticles are considered to be one of the most effective UV blocking agents. However, the development of ZnO-based UV shielding products is currently hindered due to the adverse effects of the inherent photocatalytic activity exhibited by ZnO. This paper reports our recent study on the possibility of reducing the photoactivity of ZnO nanoparticles via surface modification and impurity doping. It was found that the photoactivity was drastically reduced by SiO2-coatings that were applied to ZnO quantum dots using the Stöber method and a microemulsion technique. The effect of transition metal doping on the photoactivity was also studied using mechanochemical processing and a co-precipitation method. Cobalt doping reduced the photoactivity, while manganese doping led to mixed results, possibly due to the difference in the location of dopant ions derived from the difference in the synthesis methods.

UV protection performance of textiles affected by fiber cross-sectional shape

Abstract
In this study, a model was set up for simulating the effects of varying fiber cross-sectional shapes on ultraviolet protection of fibers. The fiber diameter and fiber type were also involved in the model setting. Experiments of diffuse reflectance spectra measurement on natural (wool, cotton, silk), regenerated (bamboo viscose) and synthetic (polyester, nylon) fibers were conducted to verify the model predicted results. When a more complex shape was assumed as the fiber cross-section for model calculation, the predicted results have a better agreement with the actual results. The effects on ultraviolet absorption from fibers with different cross-sectional shapes were investigated at a single fiber, fiber bundle and yarn levels. With the same material, when the fiber cross-sectional area and the areal coverage of a single fiber were constant, the triangular shape had the lowest ultraviolet transmittance and the highest ultraviolet reflectance for a single fiber and also for a fiber bundle. The difference of fiber cross-sectional shapes was also significant in the ultraviolet protection of a single yarn.

Towards standardization of UV eye protection:what can be learned from photodermatology?

While knowledge about standardization of skin protection against ultraviolet radiation (UVR) has progressed over the past few decades, there is no uniform and generally accepted standardized measurement for UV eye protection. The literature provides solid evidence that UV can induce considerable damage to structures of the eye. As well as damaging the eyelids and periorbital skin, chronic UV exposure may also affect the conjunctiva and lens. Clinically, this damage can manifest as skin cancer and premature skin ageing as well as the development of pterygia and premature cortical cataracts. Modern eye protection, used daily, offers the opportunity to prevent these adverse sequelae of lifelong UV exposure. A standardized, reliable and comprehensive label for consumers and professionals is currently lacking. In this review we (i) summarize the existing literature about UV radiation-induced damage to the eye and surrounding skin; (ii) review the recent technological advances in UV protection by means of lenses; (iii) review the definition of the Eye-Sun Protection Factor (E-SPF®), which describes the intrinsic UV protection properties of lenses and lens coating materials based on their capacity to absorb or reflect UV radiation; and (iv) propose a strategy for establishing the biological relevance of the E-SPF. © 2013 John Wiley & Sons A/S.

Correlating Additives to Deterioration and Assessing the Effectiveness of Acrylic Coatings for the Protection of Rubber

Conservators have long been aware of the problems associated with the preservation of rubber objects due to inherent instability that can be attributed, in part, to the presence of additives. Inorganic additives, such as fillers, accelerators, stabilizers, and special ingredients are necessary in manufacturing to alter the properties of natural rubber. These materials all have different interactions with the rubber, and each other, and differing effects on the ageing process. To date, the most effective and accepted methods to preserve rubber are cold, dark storage of objects, or the use of low oxygen environments. While these methods are effective, they greatly limit access. The application of coatings to the surface of rubber objects can slow deterioration and greatly increase the ability of an institution to handle and display rubber objects. While numerous coatings for preventive and interventive treatment have been tested, none have been so successful to warrant routine use. The first section of this research highlighted the relationship between the inclusion of certain additives in natural rubber objects and the accelerated or slowed down overall degradation. In the second part of this research, the acrylic varnishes Golden Polymer Varnish with UVLS, Lascaux Acrylic Transparent Varnish-UV, Sennelier Matte Lacquer with UV Protection, and Liquitex Soluvar Varnish containing ultraviolet light absorbers or stabilizers were tested as a preventative coating for rubber. Through testing the visual and physical properties of the samples, as well as compound analysis the results of this research suggest that acrylic varnishes do provide protection, each to varying degrees. The results also provided insight into the behavior of rubber and these varnishes with continuing light exposure.

Nanoparticle coatings for UV protective textiles

As the intensity of UV radiation increases every year, effective methods to block UV rays to protect human skin, plastics, timber and other polymer materials are urgently sought. Textiles serve as important materials for UV protection in many applications. The utilisation of nanoparticles to textile materials has been the object of several studies aimed at producing finished fabrics with different performances. This article reviews the recent advancement in the field of UV blocking textiles and fibers that are functionalised with nanostructured surface coatings. Different types of UV blocking agents are discussed and various examples of UV blocking textiles utilising ZnO and TiO₂ are presented. Future challenges such as wash-fastness and photocatalysis are also discussed.

The influence of yarn parameters on the ultraviolet protection of yarns

 Improving ultraviolet (UV) protection of textiles is essential to protect wearers against UV radiation induced risks. In addition to fabric parameters, yarn parameters are important factors affecting UV protection of textiles. This work is to examine the influence of yarn parameters on UV protection in order to set up a statistical model for predicting the UV protection of yarns. Wool yarns with different variables were used to test the ultraviolet protection factor (UPF) values for data analysis and the model verification. The model provides the optimized parameters for the UV protective fabric design. This work is helpful as a pre-cursor to the development of a more advanced optical model, which will look at understanding the penetration of UV light through fibres, yarns and fabrics.

Effects of fibre parameters on the ultraviolet protection of fibre assemblies

Ultraviolet (UV) radiation protection is becoming increasingly necessary for human health, and textiles play an important role. The interaction between UV light and textiles is a complex one, involving fibre, yarn and fabric parameters. In this study, an optical model is presented for examining the influences of fibre parameters on the UV protection offered by a bundle of fibres with a given mass. The effects of mean fibre diameter and fibre type on UV absorption were examined. The model was verified with results of UV–visible diffuse reflectance measurements on natural and synthetic fibres. When the mass of fibres was kept constant, within the measurement range in this study, a bundle of fibres with coarser fibres had a lower UV reflectance than that with finer ones. The model accurately predicted factors influencing UV protection, including fibre diameter, fibre transmittance, porosity and refractive index.

Preventing wool photoyellowing with inorganic UV absorbers

 Novel nano-structured inorganic UV absorbers have been fabricated in this work to protect wool against wool photoyellowing. These inorganic UV absorbers also can be used in other field for UV protection.

Research on the influence of yarn parameters on the ultraviolet protection of yarns

Considering both the yarn parameters and the light interaction (reflectance and transmittance) between two adjacent yarns, an optical model was presented to understand the ultraviolet (UV) light penetrating a single undyed yarn and a lot of yarns. The optical model was verified with results of diffuse reflectance spectra measurement on wool yarn samples. This optical model was used to predict the factors influencing UV protection, including fibre diameter, yarn linear density, yarn twist, transmittance index and refractive index. The statistical predictive model was also set up to show the relationship between the yarn parameters and the UV protection (UPF values) of the yarns. Yarns with the fine diameter, large yarn linear density and low yarn twist had the high UV protection.

Ultraviolet damage to the eye revisited:eye-sun protection factor (E-SPF®), a new ultraviolet protection label for eyewear

Ultraviolet (UV) radiation potentially damages the skin, the immune system, and structures of the eye. A useful UV sun protection for the skin has been established. Since a remarkable body of evidence shows an association between UV radiation and damage to structures of the eye, eye protection is important, but a reliable and practical tool to assess and compare the UV-protective properties of lenses has been lacking. Among the general lay public, misconceptions on eye-sun protection have been identified. For example, sun protection is mainly ascribed to sunglasses, but less so to clear lenses. Skin malignancies in the periorbital region are frequent, but usual topical skin protection does not include the lids. Recent research utilized exact dosimetry and demonstrated relevant differences in UV burden to the eye and skin at a given ambient irradiation. Chronic UV effects on the cornea and lens are cumulative, so effective UV protection of the eyes is important for all age groups and should be used systematically. Protection of children's eyes is especially important, because UV transmittance is higher at a very young age, allowing higher levels of UV radiation to reach the crystalline lens and even the retina. Sunglasses as well as clear lenses (plano and prescription) effectively reduce transmittance of UV radiation. However, an important share of the UV burden to the eye is explained by back reflection of radiation from lenses to the eye. UV radiation incident from an angle of 135°-150° behind a lens wearer is reflected from the back side of lenses. The usual antireflective coatings considerably increase reflection of UV radiation. To provide reliable labeling of the protective potential of lenses, an eye-sun protection factor (E-SPF®) has been developed. It integrates UV transmission as well as UV reflectance of lenses. The E-SPF® compares well with established skin-sun protection factors and provides clear messages to eye health care providers and to lay consumers. © 2014 Behar-Cohen et al, This work is published by Dove Medical Press Ltd.