Inverse identification of the bending stiffness of a braided polyethylene twine subject to large deformation: application to the identification of the mesh opening rigidity of fishing nets.

The evaluation of the mesh opening stiffness of fishing nets is an important issue in assessing the selectivity of trawls. It appeared that a larger bending rigidity of twines decreases the mesh opening and could reduce the escapement of fish. Nevertheless, netting structure is complex. A netting is made up of braided twines made of polyethylene or polyamide. These twines are tied with non-symmetrical knots. Thus, these assemblies develop contact-friction interactions. Moreover, the netting can be subject to large deformation. In this study, we investigate the responses of netting samples to different types of solicitations. Samples are loaded and unloaded with creep and relaxation stages, with different boundary conditions. Then, two models have been developed: an analytical model and a finite element model. The last one was used to assess, with an inverse identification algorithm, the bending stiffness of twines. In this paper, experimental results and a model for netting structures made up of braided twines are presented. During dry forming of a composite, for example, the matrix is not present or not active, and relative sliding can occur between constitutive fibres. So an accurate modelling of the mechanical behaviour of fibrous material is necessary. This study offers experimental data which could permit to improve current models of contact-friction interactions [4], to validate models for large deformation analysis of fibrous materials [1] on a new experimental case, then to improve the evaluation of the mesh opening stiffness of a fishing net

Deletions and other pleasures : Episode 1: The pleasures of science fiction

"Christy Dena’s online-remix-narrative takes iconic images of popular culture and builds with them a strange world where the human fallibility is programmatically deleted. Both dystopic and playful, Dena’s work is an ironic reimagining of pleasure as a state of robotic flatlining, using tropes of science fiction to critique processes of social normalisation and increasing alienation from emotionality." This creative response began as a completely different story and form. What excited me in the end was the concept of deletion and how it could be an interesting mechanic: where the only thing you can do in the world is delete. I thought about deleting parts of robots to make them better. Healing comes from taking away, from removing things. Memories of Joseph Weizenbaum’s chatbot ELIZA came flooding back: where the (human) player is a patient talking to a Rogerian psychotherapist. But in this work I’m switching the roles and making the player the doctor, a doctor to robots…a doctor that can only prescribe deletions. I conceived of the work as a branching narrative, and started writing it in Twine. With every robot patient, the player chose one of many deletions. But when I realised I wouldn’t be able to arrange an artist and sound designer I looked for another option. I played with Zeega and felt that I could get the mood I was after with that platform. So the piece transformed into a work where the player/viewer is imprisoned in the decisions of the deleting protagonist…which has its own effect on the experience and meaning.

Sangen ialo Rucous : Schwenckfeldiläisten rukouskirja Mikael Agricolan lähteenä

Sangen ialo Rucous. The prayer book of the Schwenckfeldiens as a source for Michael Agricola The significance of the prayer book published by the Finnish reformer Michael Agricola in the year of 1544 has not been comprehended enough among the prayer literature of the Reformation century. Especially in foreign research literature one of the era s most extensive and versatile prayer books has been practically disregarded. According to the prayer book, Agricola appears to be a traditionalist, who derives most of his source material from medieval and old church prayer books. The low number of the prayers from Evangelical prayer books is noteworthy. The study in hand examines Agricola s theology expressed in his translation work of the prayer book of the mystic spiritualistic Schwenckfeldien movement. The prayer book of the Schwenckdeldiens diverged from Lutheranism was called Bekantnus der sünden and it was composed around the year of 1526. Agricola is the only prayer book collector who has regarded it as necessary to add all the 45 prayers of the Schwenckfeldien prayer book and its introduction to his book. In the prayers containing the Schwenckfeldien communion theology and Christology Agricola has not changed the content of the text, apparently because he was not aware of the problems involved in the Schwenckfeldien theology. On a few occasions Agricola added points of view concerning the church, priesthood, preaching the Word and sacraments to his prayers, which the Schwenckfeldiens despised. From the ten additions four Agricola created himself, the rest he borrowed from Wolfgang Capito s prayer book. As a source Agricola used Capito s Latin prayer book together with the German text from Bekantnus. When looking at the studied material, Agricola does not turn out to be a creative translator. Even though he had a model for a less restricted translation in Wolfgang Capito s prayer book, he sticks to his habit of translating word by word. Because not even a good example has had a liberating effect on his translation principles, Agricola cannot be considered a theologically orientated writer. The translation of the Schwenckfeldien prayers Agricola starts with Capito s prayer book. Very soon he takes the Bekantnus alongside Capito s text and abandons the use of Capito s prayer book in the middle of the translation process. Comparing Agricola s translation with the two texts in different languages has made it possible to create the disposition theory described above. On the basis of the disposition theory it can be concluded that Agricola first worked out a precise plan for his prayer book. Then he translated prayers theme by theme using multiple sources at the same time. Later Agricola fixed the disposition, which does not seem to have a direct paragon. From the prayers of the Schwenckfeldien prayer book Agricola translated 26 texts using the Bekantnus as an only base, from Capito s prayer book he translated four texts and 17 texts he translated using the two basic texts simultaneously. In the previous studies, words and texts added by Agricola have been examined as one problem unit. In this study the additions have been placed into three different categories: additions consequential on tautological parataxis, specifying additions and additions significant to the content. Due to Agricola s meticulous translation techniques, there are so few additions. Agricola does not show his own creativity even in the additions significant to the content but uses there some complete sentences or word fragments from the other prayers he has translated. In the translations of the prayers there are some unique appearing words and the analysis of the translation work shed a new light on the background of their first literary appearance in Finnish. Agricola s linguistic abilities turned out to be great. In those prayers where Agricola uses both the German and Latin basic texts at the same time, the translation process is a very intensive twine made on the basis of the two sources.

Hormones andCuscuta development: interaction of cytokinin and indole-3-acetic acid in the growth and curvature of subapical stem segments

Cuscuta stem (vines) exhibits two modes of growth—longitudinal elongation forming free-hanging vines, or coiling growth to twine around the host. The elongation zone of free-hanging vine extended up to 160 mm from the stem apex and in vivo growth rate (during 8 h of growth) was maximal in the 20-to-40-mm region. While gibberellic acid (GA3) or fusicoccin (FC) could maintain (GA3) or enhance (FC) the growth rate of apical (10 or 25 mm) segments, indole-3-acetic acid (IAA) (10 mgrM) induced growth only in subapical (5–160 mm) segments. In vitro growth rate induced by IAA (10 mgrM) was similar to the in vivo growth rate up to 40 mm. Thereafter, up to 100 mm, IAA induced growth rate exceeded in vivo growth. p ]Subapical segments (sim13 mm) from 5- to 40-mm regions responded to a cytokinin (BA, Z, or iP) or to low IAA (0.1 mgrM) with curved growth, whereas the segments grew straight in the presence of high IAA (10 mgrM). Curvature (measured as the angle subtended at the center of the circle of which the segment formed an arc) induced by BA and low (0.1 mgrM) IAA was greater than either added separately. Besides, segments induced to curve in BA + low-IAA solution could be made to straighten out by transferring to a solution containing high IAA (10 mgrM) with or without BA. Thus in vivo patterns of straight and coiling growth could be mimicked reversibly in vitro by adjusting the relative concentrations of cytokinin and auxin; low auxin and cytokinin induced coiling growth, whereas high auxin and cytokinin induced straight growth. p ]Beyond 40 mm, BA had no growth-promoting or curvative-inducing effect.Cuscuta vine segments thus showed sequential sensitivity to applied hormones, the apical region (0–25 mm) to GA3, the subapical (5–40 mm) region to BA and IAA and the region beyond (40–160 mm) to IAA alone.

Ein Vorschlag zur Senkung des Schlepppwiderstandes von Grundschleppnetzen

Mathematical modelling shows that the projection area of the trawl twine influencing its hydrodynamic resistance can be reduced by approx. 30 % through increasing the mesh size of the trawl wings and the conical parts of the trawls, in combi-nation with the use of thinner twine. The interrelation between fuel consumption and projection area of the trawl twine as well as the influence of the enlarged meshes of the wings and first panels on the catch composition can only be measured by trials on fishing boats.

T90-Steert: Letzte Untersuchungen vor der Übernahme ins EU-Regelwerk

After due consideration the EU Commission has decided in December 2005 to admit cod-ends made of netting turned 90 de-grees (T90) as an allowable alternative for the cod fishery of the Baltic. The construction was included as one of two admissibles versions into the newly issued EU regulation 2187/2005 on technical measures for the conservation of fishery resources of the Baltic. This contribution describes some of the investigations preceeding that decision with which some of the previous demurs could be dispelled. In the course of these experiments it was detected that the cod-end netting material plays an important role for the mesh selection of a T90 cod-end, whereas the netting twine diameter is negligible. Problems with modern twine mate-rial have to be taken in consideration for constructional changes of T90 cod-ends. A relation of 1 to 2 in the circumferences in meshes at the joining round between last row of the belly and extension/cod-end turned out to be acceptable. Both the hauling technique (sidetrawler or sterntrawler) and an extensive use in the commercial fishery proved to be of no relevance for to the selection of T90 cod-ends. Taken alone, the different hydrodynamic conditions in a cod-end are insufficient to fully explain the selection phenomena. This was demonstrates by the material-related differences in selectivity of T90 cod-ends.

Application of participatory rural appraisal (PRA) techniques in the verification of fisheries data and trend on Lake Kainji

After several years of surveys on the Kainji Lake fisheries activities by the Nigerian German Kainji Lake Fish promotion Project (KLFPP) trends regarding catches, yield and other parameter begin to emerge. However, it became obvious that some of the data were not quite as accurate as they were believed to be. Looking at the different editions of the statistical bulletin of Kainji Lake, concerning one given fisheries parameter, sometimes it is possible to reveal inconsistencies and unexplained trends. As compared to the survey method, PRA is primarily for analysis of differences in local phenomenon and processes. Therefore, PRA was used as a complementary tool to enhance the knowledge on issues like fisher women, entrepreneurs, gear ownership structure, mode of operation by owners of large gear number, preference in the use of twine and nylon gill nets, and reasons for misinformation on the number of fishing equipment owned by entrepreneurs, which cannot be done with frame survey. PRA techniques like timeline, mapping, seasonal calendar, transect walk and key informant interviews were utilized in the study process

On the comparative efficiency of conventional and bulged belly fish trawls

To ensure a greater vertical opening while under tow, a trawl net with a bulged belly was made and compared with a conventional design under actual fishing conditions. It was found that the new design landed 31.8% more fish. Since the percentage lateral spread was relatively less for the bulged belly net, it was inferred that this net had higher head line height, while under operation and this was further substantiated by a greater catch of off—bottom fishes. Further, half the quantity of twine can be saved by changing the conventional trawl to that of bulged belly type.

Observation on the lunar and tidal influence on gill netting in the Bay of Bengal

The effect of lunar and tidal influence on the landing of pelagic fish with drift gill nets has been studied for the first time from Bay of Bengal along the Orissa coast. The catchability of the gear was highest during the first quarter and lowest in the fourth quarter of the moon. The variation in catch rates during the four different quarters was not statistically significant. Contrary to the earlier belief, landing with gill net was not poor during the moonlit nights. The extensive use of bluish grey nylon twine matching with seawater in place of indigenous hemp or cotton twine, has largely eliminated the visibility of gear during the brighter phase of the moon. The rate of exploitation was found to be significantly higher during the nights of neap tide, compared to those of spring tide. A plausible explanation for this phenomenon has been offered.

A note on the comparative catch efficiency of nylon over cotton gill nets in reservoir fishing

The authors conducted a series of experiments to evaluate the relative efficiency of nylon over cotton in tropical waters, particularly in reservoir fishing. The experiments were conducted in the Gobindsagar reservoir (Himachal Pradesh/Punjab). The nets made with both materials were identical in essential details like twine size, mesh size, number of floats arid sinkers and hanging coefficients.

Selectivity of gill nets for Scomberomorus commersoni

Selectivity of gill nets for S. commersoni was studied with nets made of 4 different mesh sizes fabricated with 4 different specifications of nylon twines. Fishing operations were conducted off Cochin through the fishing seasons 1968-72. The commercially significant size group of S. commersoni was found to fall in the length range of 850-950 mm. The optimum mesh size required for the capture of this group of S. commersoni was estimated as 76 mm. bar in nylon twine 210/12/3. The relationship between the twine size and mesh size was also worked out.

Tensile strength properties of polyethylene netting twines under exposure to out-door and artificial UV radiation

Photodegradation of three types of polyethylene twines namely, polyethylene fibrillated tape twine, polyethylene flat tape twine and polyethylene monofilament twines were studied by exposing them to sunlight and artificial UV radiation. The percentage residual strength varied in the samples, the monofilament with the highest residual strength followed by fibrillated tape twine and flat tape twine. A plot of the difference between the breaking strengths of the fibrillated tape twine and the mono filament twines against any given period of exposure exhibited a linear relationship

Studies on the suitability of HDPE material for gill nets

The suitability of HDPE yarn and HDPE twine in place of nylon for gill nets has been studied. As regards total catch nylon gill net is found to be better than HDPE nets. However, statistical analysis of the catch in respect of quality fishes shows that HDPE yarn nets are equally efficient as nylon nets.

Caracterización de redes de cerco artesanal para anchoveta destinada al consumo humano directo

Las características principales de las redes de cerco artesanales anchoveteras para CHD (PS 01.1.0 “ISSCFG”), utilizan tamaños de malla en el copo y cuerpo de ½” ~ 13 mm de material nylon Poliamida (PA). Se encontró una diferencia en las dimensiones, el material y diámetro del hilo del paño usado, entre las redes de las ANC-CHD tradicionales (Paita, Chimbote, Callao e Ilo) que utilizan paños anchoveteros de R310tex, R381tex R462tex, con longitud de relinga superior (LRS) de 183-366 m (100 a 200 bz), altura de paño estirado (AHE) de 27 a 64 m (15 a 35 bz); y las redes de cerco ANC-Pisco que utilizan paños anchoveteros de R155tex y R230tex, con LRS de 270 a 396 m (145 a 215 bz) y AHE de 30 m (16 bz). Del análisis regresional experimental, las principales características de la red (LRS, AHE), y la embarcación–capacidad de bodega-(CBOD) presentaron correlaciones significativas para la flota ANC-Tradicional (r = 0,86 y 0,91), mientras que en la flota ANC-Pisco las correlación de la función CBODLRS fue de 0,30 y la AHE fue constante (30 m) para todo el rango de LRS (270 - 396 m).