Synthesis and properties of novel organosoluble polyimides derived from 1,4-bis[4-(3,4-dicarboxylphenoxy)]triptycene dianhydride and various aromatic diamines

A novel triptycene-based dianhydride, 1,4-bis[4-(3,4-dicarboxylphenoxy)]triptycene dianhydride, was prepared from 4-nitro-N-methylphthalimide and potassium phenolate of 1,4-dihydroxytriptycene (1). The aromatic nucleophilic substitution reaction between 4-nitro-N-methylphthalimide and I afforded triptycene-based bis(N-methylphthalimide) (2), which hydrolyzed and subsequently dehydrated to give the corresponding dianhydride (3). A series of new polyimides containing triptycene moieties were prepared from the dianhydride monomer (3) and various diamines in in-cresol via conventional one-step polycondensation method. Most of the resulting polyimides were soluble in common organic solvents, such as chloroform, THF, DMAc and DMSO. The polyimides exhibited excellent thermal and thermo-oxidative stabilities with the onset decomposition temperature and 10% weight loss temperature ranging from 448 to 486 degrees C and 526 to 565 degrees C in nitrogen atmosphere, respectively. The glass transition temperatures of the polyimides were in the range of 221-296 degrees C. The polyimide films were found to be transparent, flexible, and tough. The films had tensile strengths, elongations at break, and tensile moduli in the ranges 95-118 MPa, 5.3-16.2%, and 1.03-1.38 GPa, respectively. Wide-angle X-ray diffraction measurements revealed that these polyimides were amorphous.

Mass spectrometric evidence for the generation of benzyne from benzoyl peroxide in thermolysis

Benzoyl peroxide gave rise to benzoic acid (at m/z 122) in its electron impact mass spectrum, and its perdeuterated counterpart produced perdeuterobenzoic acid, C6D5CO2D, at m/z 128 under the same conditions, An intramolecular hydrogen abstraction is proposed for the formation of benzoic acid from the peroxide in thermolysis. As a result of this reaction, benzyne would be generated simultaneously. Anthracene was employed to trap any of the reactive intermediate benzyne. Collision-induced dissociation of the ion of m/z 254 from the mixture of benzoyl peroxide and anthracene indicated that triptycene was obtained by the trapping reaction, therefore confirming that benzyne is generated from benzoyl peroxide in thermolysis.

Fast atom bombardment mass spectrometry studies of ruthenium (II) polypyridy coordination complexes and of group V Triptycenes and related complexes

In order to investigate the use of Fast Atom Bombardment Mass Spectrometry (FAB-MS) as a tool for structural characterization, two groups of complexes are analyzed. The first group is a set of ruthenium(II) coordination complexes containing bidentate polypyridyl ligands. The positive and negative ion FAB-MS spectra are found to be sufficient to allow for an almost complete characterization of the central metal atom, the ligands and the counter anions contained in the intact complex. An unusual observation of mUltiply charged ions in the positive ion FAB-MS spectra (i.e. [RUL 3 ]2+) is explained to be as a result of the oxidative quenching of the excited state of the doubly charged ion by the matrix, 3-nitrobenzyl alcohol. An analysis of a mixture shows that the technique is a good one for identifying components therein. A group of triptycene and related complexes containing Group V elements is also analyzed by FAB-MS and the results. in terms of relative abundances of fragment ions, are found to be consistent with known metal-carbon bond strengths.

Étude de l'association supramoléculaire à l'état solide des fullerènes C60 et C70 avec des dérivés triptycényles fonctionnalisés

Le fullerène C60 est une molécule sphérique composée exclusivement d'atomes de carbone. Ce composé possède une surface aromatique convexe homogène et peut s'associer, entre autres, avec des molécules possédant des surfaces aromatiques par des interactions non-covalentes. Le triptycène est une molécule en forme de "Y" qui possède des surfaces aromatiques convexes. Cette molécule possède l'habileté de s'associer avec le C60 par des interactions de type π qui sont amplifiées par la complémentarité des surfaces concaves et convexes impliquées dans les arrangements cristallins. Nous avons synthétisé des dérivés triptycényles portant des groupements fonctionnels aux extrémités des bras de ce noyau de façon à étendre les cavités disponibles pour interagir avec le C60. En effet, nous avons découvert que les atomes de chlore, de brome et d'iode ainsi que les groupements méthyle permettent d'étendre les surfaces disponibles pour interagir avec les fullerènes C60 et C70. Nous avons étudié les associations entre les dérivés triptycényles et les fullerènes par l'analyse des structures cristallographiques résolues par diffraction des rayons-X. De plus, nous avons étudié les associations entre les molécules considérées par l'analyse des surfaces d'Hirshfeld entourant les fullerènes. Découlant de ces études, l'effet d'amplification des atomes de chlore, de brome et d'iode ainsi que les groupements méthyle a été employé pour identifier de nouveaux solvants aptes à solubiliser efficacement le C60.

Photophysical investigation of light-harvesting systems for solar-to-fuel conversion

In recent years, an increasing attention has been given to the optimization of the performances of new supramolecular systems, as antennas for light collection. In such background, the aim of this thesis was the study of multichromophoric architectures capable of performing such basic action. A synthetic antenna should consist of a structure with large UV-Vis absorption cross-section, panchromatic absorption, fixed orientation of the components and suitable energy gradients between them, in order to funnel absorbed energy towards a specific site, through fast energy-transfer processes. Among the systems investigated in this thesis, three suitable classes of compounds can be identified: 1) transition metal-based multichromophoric arrays, as models for antenna construction, 2) free-base trans-A2B-phenylcorroles, as self-assembling systems to make effective mimics of the photosynthetic system, and 3) a natural harvester, the Photosystem I, immobilized on the photoanode of a solar-to-fuel conversion device. The discussion starts with the description of the photophysical properties of dinuclear quinonoid organometallic systems, able to fulfil some of the above mentioned absorption requirements, displaying in some cases panchromatic absorption. The investigation is extended to the efficient energy transfer processes occurring in supramolecular architectures, suitably organized around rigid organic scaffolds, such as spiro-bifluorene and triptycene. Furthermore, the photophysical characterization of three trans-A2B-phenylcorroles with different substituents on the meso-phenyl ring is introduced, revealing the tendency of such macrocycles to self-organize into dimers, by mimicking natural self-aggregates antenna systems. In the end, the photophysical analysis moved towards the natural super-complex PSI-LHCI, immobilized on the hematite surface of the photoanode of a bio-hybrid dye-sensitized solar cell. The importance of the entire work is related to the need for a deep understanding of the energy transfer mechanisms occurring in supramolecules, to gain insights and improve the strategies for governing the directionality of the energy flow in the construction of well-performing antenna systems.

Supramolekulare Affinitätsmaterialien basierend auf (–)-Isosteviol

Der Einsatz von optisch aktiven Elementen im Rückgrat von Wirtstrukturen ermöglicht die enantiofaciale Differenzierung von Gastmolekülen. In Vorarbeiten wurde die Synthese eines Triphenylenketals basierend auf dem optisch reinen Naturstoff (–)-Isosteviol entwickelt. Aufbauend darauf wurde im Zuge dieser Dissertation ein para-Toluolsulfonamid-funktionalisierter Rezeptor synthetisiert, welcher exzellentes Verhalten als Affinitätsmaterial in den im Arbeitskreis eingesetzten Quarzmikrowaagen-basierten Sensoren (QMB) aufweist. Im Zuge der Konstruktion einer (–)-Isosteviol-basierten Architektur mit verkleinerter Kavität wurde der Fünfring des (–)-Isosteviols („D-Ring“) in einem mehrstufigen Prozess zu einem sechsgliedrigen Ring erweitert. Eine Ketalisierung über die Ketofunktion am entsprechenden Ring dieser Verbindung lieferte den Grundbaustein für die Konstruktion von Triphenylenketalen. Weiterhin wurde die Synthese von Rezeptorstrukturen mit Triptycen-Gerüst in Verbindung mit (–)-Isosteviol beschrieben. Die Kombination verschiedener Ester des (–)-Isosteviol-Diketons mit Hexaammoniumtriptycen-Hexachlorid führte zum Aufbau der Rezeptorarchitekturen in Ausbeuten von bis zu 95%, die entsprechenden Produkte fielen als all-syn- und anti,anti,syn-Isomere an. Beide Isomere zeigten teils exzellentes Verhalten als Affinitätsmaterialen. Insbesondere in der Detektion kleinster Mengen an Benzol zeigte sich eins dieser Substrate als fähiger als sämtliche vorher bekannten und getesteten Substanzen. In einem letzten, abschließenden Schritt wurde über eine Olefin-Metathese eine Käfigstruktur für den Einsatz in der Sensorik dargestellt.