852 resultados para Tree breeding
Resumo:
The present paper deals with estimation of variance components, prediction of breeding values and selection in a population of rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell.-Arg.] from Rio Branco, State of Acre, Brazil. The REML/BLUP (restricted maximum likelihood/best linear unbiased prediction) procedure was applied. For this purpose, 37 rubber tree families were obtained and assessed in a randomized complete block design, with three unbalanced replications. The field trial was carried out at the Experimental Station of UNESP, located in Selvíria, State of Mato Grosso do Sul, Brazil. The quantitative traits evaluated were: girth (G), bark thickness (BT), number of latex vessel rings (NR), and plant height (PH). Given the unbalanced condition of the progeny test, the REML/BLUP procedure was used for estimation. The narrow-sense individual heritability estimates were 0.43 for G, 0.18 for BT, 0.01 for NR, and 0.51 for PH. Two selection strategies were adopted: one short-term (ST - selection intensity of 8.85%) and the other long-term (LT - selection intensity of 26.56%). For G, the estimated genetic gains in relation to the population average were 26.80% and 17.94%, respectively, according to the ST and LT strategies. The effective population sizes were 22.35 and 46.03, respectively. The LT and ST strategies maintained 45.80% and 28.24%, respectively, of the original genetic diversity represented in the progeny test. So, it can be inferred that this population has potential for both breeding and ex situ genetic conservation as a supplier of genetic material for advanced rubber tree breeding programs. Copyright by the Brazilian Society of Genetics.
Resumo:
Cover title.
Resumo:
Eucalyptus pellita demonstrated good growth and wood quality traits in this study, with young plantation grown timber being suitable for both solid and pulp wood products. All traits examined were under moderate levels of genetic control with little genotype by environment interaction when grown on two contrasting sites in Vietnam. Eucalyptus pellita currently has a significant role in reforestation in the tropics. Research to support expanded of use of this species is needed: particularly, research to better understand the genetic control of key traits will facilitate the development of genetically improved planting stock. This study aimed to provide estimates of the heritability of diameter at breast height over bark, wood basic density, Kraft pulp yield, modulus of elasticity and microfibril angle, and the genetic correlations among these traits, and understand the importance of genotype by environment interactions in Vietnam. Data for diameter and wood properties were collected from two 10-year-old, open-pollinated progeny trials of E. pellita in Vietnam that evaluated 104 families from six native range and three orchard sources. Wood properties were estimated from wood samples using near-infrared (NIR) spectroscopy. Data were analysed using mixed linear models to estimate genetic parameters (heritability, proportion of variance between seed sources and genetic correlations). Variation among the nine sources was small compared to additive variance. Narrow-sense heritability and genetic correlation estimates indicated that simultaneous improvements in most traits could be achieved from selection among and within families as the genetic correlations among traits were either favourable or close to zero. Type B genetic correlations approached one for all traits suggesting that genotype by environment interactions were of little importance. These results support a breeding strategy utilizing a single breeding population advanced by selecting the best individuals across all seed sources. Both growth and wood properties have been evaluated. Multi-trait selection for growth and wood property traits will lead to more productive populations of E. pellita both with improved productivity and improved timber and pulp properties.
Resumo:
Hevea brasiliensis is a native species of the Amazon Basin of South America and the primary source of natural rubber worldwide. Due to the occurrence of South American Leaf Blight disease in this area, rubber plantations have been extended to suboptimal regions. Rubber tree breeding is time-consuming and expensive, but molecular markers can serve as a tool for early evaluation, thus reducing time and costs. In this work, we constructed six different cDNA libraries with the aim of developing gene-targeted molecular markers for the rubber tree. A total of 8,263 reads were assembled, generating 5,025 unigenes that were analyzed; 912 expressed sequence tags (ESTs) represented new transcripts, and two sequences were highly up-regulated by cold stress. These unigenes were scanned for microsatellite (SSR) regions and single nucleotide polymorphisms (SNPs). In total, 169 novel EST-SSR markers were developed; 138 loci were polymorphic in the rubber tree, and 98 % presented transferability to six other Hevea species. Locus duplication was observed in H. brasiliensis and other species. Additionally, 43 SNP markers in 13 sequences that showed similarity to proteins involved in stress response, latex biosynthesis and developmental processes were characterized. cDNA libraries are a rich source of SSR and SNP markers and enable the identification of new transcripts. The new markers developed here will be a valuable resource for linkage mapping, QTL identification and other studies in the rubber tree and can also be used to evaluate the genetic variability of other Hevea species, which are valuable assets in rubber tree breeding.
Resumo:
The objective of this work was to estimate the genetic variability and divergence among 22 superior rubber tree (Hevea sp.) genotypes of the IAC 400 series. Univariate and multivariate analyses were performed using eight quantitative traits (descriptors), including yield. In the univariate analyses, the estimated parameters were: genetic and environmental variances; genetic and environmental coefficients of variation; and the variation index. The Mahalanobis generalized distance, the Tocher agglomerative method and canonical variables were used for the multivariate analyses. In the univariate analyses, variability was verified among the genotypes for all the variables evaluated. The Tocher method grouped the genotypes into 11 clusters of dissimilarity. The first four canonical variables explained 87.93% of the cumulative variation. The highest genetic variability was found in rubber yield-related traits, which contributed the most to the genetic divergence. The most divergent pairs of genotypes are suggested for crossbreeding. The genotypes evaluated are suitable for breeding and may be used to continue the IAC rubber tree breeding program.
Resumo:
Eucalyptus camaldulensis has great importance in Brazil because of their phenotypic plasticity for different environmental conditions, as soils, altitudes and rainfall. This study is an investigation of a base population of E. camaldulensis from Australia through a progeny test implanted in Selviria, MS. The trial was established in a randomized block design, with 25 families and 60 replications of single tree plots. Genetic parameters for anatomic traits and volume shrinkage were estimated, as well as their correlations with wood basic density. No significant differences among progenies were observed for the traits studied. The additive genetic variation coefficient at individual and among progeny levels ranged from low (0.26%) to high (16.98%). The narrow sense heritability at individual and family means levels also ranged from low (0.01) to high (0.87). This indicates that some traits are under strong genetic control and can be improved by selection. In the present situation, in order to attain the highest genetic gains, the sequential selection among and within progeny would be recommended.
Resumo:
Estudi de l’ efecte de les condicions ambientals,concretament de la temperatura, sobre l’eficàcia de les principals matèries actives, àcid naftalè acètic (ANA) i 6- benziladenina (6-BA), emprades en l’aclarida química de les pomeres
Resumo:
This study aimed to evaluate the genetic variability among individuals of a base population of Eucalyptus grandis and to build a molecular marker database for the analyzed populations. The Eucalyptus grandis base population comprised 327 individuals from Coff's Harbour, Atherton and Rio Claro. A few plants came from other sites (Belthorpe MT. Pandanus, Kenilworth, Yabbra, etc.). Since this base population had a heterogeneous composition, the groups were divided according to geographic localization (latitude and longitude), and genetic breeding level. Thus, the influence of those two factors (geographic localization and genetic breeding level) on the genetic variability detected was discussed. The RAPD technique allowed the evaluation of 70 loci. The binary matrix was used to estimate the genetic similarity among individuals using Jaccard's Coefficient. Parametric statistical tests were used to compare within-group similarity of the means. The obtained results showed that the base population had wide genetic variability and a mean genetic similarity of 0.328. Sub-group 3 (wild materials from the Atherton region) showed mean genetic similarity of 0.318. S.P.A. (from Coff's Harbour region) had a mean genetic similarity of 0.322 and was found to be very important for maintenance of variation in the base population. This can be explained since the individuals from those groups accounted for most of the base population (48.3% for it). The base population plants with genetic similarity higher than 0.60 should be phenotypically analyzed again in order to clarify the tendency of genetic variability during breeding programs.
Resumo:
The seedling production stage is the key to achieve uniformity in tree breeding stage. This study evaluated "bocaiúva" (Acrocomia aculeata) seedling formation, with pre-germinated seeds in different substrates and protected environments, in the University of Mato Grosso do Sul State, Aquidauana, MS. As substrates, we used 100% cattle manure (M), 100% cassava branches (CB), 100% vermiculite (V), 50% cattle manure + 50% cassava branches, 50 % cattle manure + 50% vermiculite, 50% cassava branches + 50% vermiculite and ⅓ cattle manure + ⅓ cassava branches + ⅓ vermiculite. These substrates were tested in a greenhouse covered with 150 µm low density polyethylene (LDPE) film under thermo-reflective screen with 50% shading under film; black screen with 50% shading on the sides; black monofilament screen with 50% shading set on roof and sides; and aluminized thermo- reflective screen with 50% shading set on roof and sides. The completely randomized experimental design with 5 replications of 5 plants each was adopted. Initially, data were submitted to analysis of substrate individual variance in each growing environment, then performing the waste mean square evaluation and their environment joint analysis for comparison. The best growing environment is the thermo-reflective screen compared to LDPE greenhouse and black screen set. All substrates containing manure are recommended for bocaiúva seedlings formation. The pure cassava branch is not indicated for seedling, even using chemical fertilizer.
Resumo:
Estudi de l’ efecte de les condicions ambientals, concretament de la temperatura, sobre l’eficàcia de les principals matèries actives, àcid naftalè acètic (ANA) i 6- benziladenina (6-BA), emprades en l’aclarida química de les pomeres
Resumo:
Este estudo visou avaliar a variabilidade e distância genética dentro de uma população-base de melhoramento genético de Eucalyptus grandis. A avaliação da variabilidade genética tem como objetivos principais analisar a base genética da população-base e montar um banco de dados marcadores moleculares da população em análise. Essa população é formada por 327 indivíduos, principalmente das procedências de Coff's Harbour, Atherton e Rio Claro. Devido à heterozigosidade natural dessa população, ela pode ser dividida em diversas subpopulações, de acordo com a latitude e longitude de origem; e dentro de subpopulações, em função do grau de melhoramento genético já realizado do material analisado no Brasil. Isso permitiu avaliar quanto da variabilidade detectada dentro da população-base foi devido a esses fatores: procedência e grau de melhoramento. A aplicação da técnica RAPD permitiu avaliar 70 locos polimórficos, que foram analisados utilizando-se o coeficiente de Jaccard, o que resultou em matrizes de similaridade genética entre os indivíduos. Os dados de similaridade genética posteriormente foram submetidos à análise estatística. Osdados indicaram que a população-base apresenta ampla base genética, com média de similaridade genética de 0,328. O subgrupo denominado Região 3, composto por material selvagem da macrorregião de Atherton, juntamente com material de APS da macrorregião de Coff's Harbour, foi um dos que mais contribuíram para a ampla base genética da população-base. Foi possível detectar diferença estatística entre as populações selvagens das procedências de Atherton e Coff's Harbour, assim como entre essas procedências e a de Rio Claro.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The aim of this study was to investigate the genetic variation, the genotype × soil interaction and the selection among and within Corymbia citriodora progenies in three different kinds of soils (Red Latossol, Quartz Sand and Purple Latossol), which occur in the Luiz Antônio Experimental Station, São Paulo State, Brazil. The progeny test was established 1983, using 56 open-pollinated families of C. citriodora. Twenty fve years after planting the following traits were measured: height, diameter at breast height (Dbh), stem form and survival. Best growth occurred in Purple Latossol. Significant differences among progenies were detected for most traits in all sites, suggesting the possibility of improvement by selection. In the analysis with sites, Significant differences among locals, progenies and genotypes × soil interaction were detected, confiming that the tested material has sufficient genetic variation to be explored by selection in all sites. The analysis of genotype × soil interaction indicates that growth traits present single interaction and the same progenies can be selected in each site. On the order hand, genotype × soil interaction for stem form and survival was complex; and specifc progenies need to be selected for each kind of soil. The population, due to its high genetic variation and strong genetic control of traits, permits to obtain considerable genetic gains by selection among and within progenies.