MIGRATION MEASUREMENTS FROM PLASTIC PACKAGING: A SIMULATION STUDY ON INFLUENCE OF INITIAL CONCENTRATION PROFILE

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Initial concentration profile influence on migration measurements from plastic packaging: A simulation study

Migration of components from plastic packaging into foodstuffs or into medicines is a very important issue, concerning public health. Using experimental techniques, like gas chromatography-mass spectrometry, these essays measure total migration and specific migration of components from plastic packaging. This work presents an explanation and applications of a numerical technique tool for this measurement, allowing the comprehension of the diffusion process and the estimate of component migration in difficult or impractical measurements. As an application example, the non-uniform influence of initial concentration profile on the migration is presented, demonstrating the necessity of this profile determination for high quality considerations on involved metrology.

Estudi de software lliure en diferents entorns

El software lliure està tenint últimament un pes cada cop més important en les empreses, però encara és el gran desconegut per a molta gent. Des de la seva creació als anys 80 fins ara, hi ha hagut un creixement exponencial de software lliure de gran qualitat, oferint eines per a tot tipus de necessitats, eines ofimàtiques, gestors de correu, sistemes de fitxer, sistemes operatius…. Tot aquest moviment no ha passat desapercebut per a molts usuaris i empreses, que s’han aprofitat d’ell per cobrir les seves necessitats. Pel que fa a les empreses, cada cop n’hi ha més que en petita o gran mesura, utilitzen el software lliure, ja sigui per el seu menor cost d’adquisició, o bé per la seva gran fiabilitat o per que és fàcilment adaptable o per no establir cap lligam tecnològic, en definitiva per tenir més llibertat. En el moment de la creació d’una nova empresa, on es parteix de zero en tota la tecnologia informàtica, és el moment menys costòs d’implementar l’arquitectura informàtica amb software lliure, és quan l’impacte que té sobre l’empresa, usuaris i clients és menor. En les empreses que ja tenen un sistema informàtic, caldrà establir un pla de migració, ja sigui total o parcial. La finalitat d’aquest projecte no és la de dir quin software és millor que l’altre o de dir quin s’ha d’instal•lar, sinó el de donar a conèixer el món del software lliure, mostrar part d’aquest software, fer alguna comparativa de software lliure amb software propietari, donant idees i un conjunt de solucions per a empreses, per què una empresa pugui agafar idees d’implementació d’algunes de les solucions informàtiques exposades o seguir algun dels consells proposats. Actualment ja hi ha moltes empreses que utilitzen software lliure. Algunes només n’utilitzen una petita part en les seves instal•lacions, ja que el fet de que una empresa funcioni al 100% amb software lliure, tot i que n’hi comença ha haver, de moment ho considero una mica arriscat, però que en poc temps, aquest fet serà cada cop més habitual.

Estudi de software lliure en diferents entorns

El software lliure està tenint últimament un pes cada cop més important en les empreses, però encara és el gran desconegut per a molta gent. Des de la seva creació als anys 80 fins ara, hi ha hagut un creixement exponencial de software lliure de gran qualitat, oferint eines per a tot tipus de necessitats, eines ofimàtiques, gestors de correu, sistemes de fitxer, sistemes operatius…. Tot aquest moviment no ha passat desapercebut per a molts usuaris i empreses, que s’han aprofitat d’ell per cobrir les seves necessitats. Pel que fa a les empreses, cada cop n’hi ha més que en petita o gran mesura, utilitzen el software lliure, ja sigui per el seu menor cost d’adquisició, o bé per la seva gran fiabilitat o per que és fàcilment adaptable o per no establir cap lligam tecnològic, en definitiva per tenir més llibertat. En el moment de la creació d’una nova empresa, on es parteix de zero en tota la tecnologia informàtica, és el moment menys costòs d’implementar l’arquitectura informàtica amb software lliure, és quan l’impacte que té sobre l’empresa, usuaris i clients és menor. En les empreses que ja tenen un sistema informàtic, caldrà establir un pla de migració, ja sigui total o parcial. La finalitat d’aquest projecte no és la de dir quin software és millor que l’altre o de dir quin s’ha d’instal•lar, sinó el de donar a conèixer el món del software lliure, mostrar part d’aquest software, fer alguna comparativa de software lliure amb software propietari, donant idees i un conjunt de solucions per a empreses, per què una empresa pugui agafar idees d’implementació d’algunes de les solucions informàtiques exposades o seguir algun dels consells proposats. Actualment ja hi ha moltes empreses que utilitzen software lliure. Algunes només n’utilitzen una petita part en les seves instal•lacions, ja que el fet de que una empresa funcioni al 100% amb software lliure, tot i que n’hi comença ha haver, de moment ho considero una mica arriscat, però que en poc temps, aquest fet serà cada cop més habitual.

Proteomic analysis of total cellular proteins of human neutrophils

Background: Neutrophils are the most abundant leukocytes in peripheral blood and represent one of the most important elements of innate immunity. Recent subcellular proteomic studies have focused on the identification of human neutrophil proteins in various subcellular membrane and granular fractions. Although there are relatively few studies dealing with the analysis of the total extract of human neutrophils, many biological problems such as the role of chemokines, adhesion molecules, and other activating inputs involved in neutrophil responses and signaling can be approached on the basis of the identification of the total cellular proteins. Results: Using gel-LC-MS/MS, 251 total cellular proteins were identified from resting human neutrophils. This is more than ten times the number of proteins identified by an initial proteome analysis of human neutrophils and almost five times the number of proteins identified by the first 2-DE map of extracts of rat polymorphonuclear leukocytes. Most of the proteins identified in the present study are well-known, but some of them, such as neutrophil-secreted proteins and centaurin beta-1, a cytoplasmic protein involved in the regulation of NF-kappa B activity, are described here for the first-time. Conclusion: The present report provides new information about the protein content of human neutrophils. Importantly, our study resulted in the discovery of a series of proteins not previously reported to be associated with human neutrophils. These data are relevant to the investigation of comparative pathological states and models for novel classes of pharmaceutical drugs that could be useful in the treatment of inflammatory disorders in which neutrophils participate.

RESTORATION OF THE ROTATION CENTER IN MINIMALLY-INVASIVE TOTAL HIP REPLACEMENT

Objective: Our aim was to evaluate the challenges in obtaining a successful restoration of the rotation center as well as a good positioning of the acetabular component when using the minimally-invasive posterior approach for uncemented total hip replacement. Methods: In a comparative non-random prospective study, 64 adult patients underwent elective total hip arthroplasty using the minimally-invasive posterior approach performed by one single surgeon, All patients included in this study had a superior and lateral migration of the rotation center of the hip in comparison to the normal contralateral hip. Patients were excluded from the study if they presented the following: diagnosis of femoral neck fracture, displasic hip types 2, 3 and 4 (Crowe`s classification), osteoarthritis of the contralateral hip. Of the 64 patients in the study, 39 had a radiographic pre-op acetabular size planning equal or less than 50 mm and 25 patients had a radiographic pre-op acetabular size planning equal or more than 52 mm. We considered a good result the following goals: acetabular bend between 35 and 50 degrees, acetabular size according to the pre-op estimative with full contact in the three zones of DeLee-Charnley, a lower medial and vertical positioning of the rotation center in comparison with the pre-op values and a final limb discrepancy lower than 10 mm. Results: A better restoration of the rotation center, as well as, excellent acetabular positioning was found in patients with smaller acetabular size (equal or less than 50), p=0, 04. We must draw attention to two risks when using the minimally-invasive posterior approach: a vertical acetabular position and a lateral position of the acetabular component increasing the risk of a poor contact in the zone 1 due to an insufficient reaming of the medial acetabular host bone. Conclusion: We propose standard surgical approaches in patients with larger anatomical measurements (acetabular planning size more than 50).

Temporary and circular labour migration : reassessing established public policies

Today, Temporary Labour Migration is a fundamental course of action promoted by relevant economic and political agents, such as EC, the GCIM, or the OECD. Based on a specific empirical case study of Temporary and Circular Labour Migration in the Catalonian agrarian sector, which has been distinguished as a particularly successful formula, we identify a new area of interest: the emergence of a new empirical migrant category, the Circular Labour Migrant, which remains theoretically unnamed and lacks public recognition. We argue that, until now, there have been two historical phases regarding temporary labour migration: one of total deregulation and another of partial regulation, led by private actors with support from public institutions, and featuring circularity. IN a developed Welfare State context, it would be normatively pertinent to except a step towards a third phase, one involving the institutionalization of this new mobility category through the elaboration of a public policy.

Total shoulder arthroplasty: downward inclination of the glenoid component to balance supraspinatus deficiency.

HYPOTHESIS: Supraspinatus deficiency associated with total shoulder arthroplasty (TSA) provokes eccentric loading and may induce loosening of the glenoid component. A downward inclination of the glenoid component has been proposed to balance supraspinatus deficiency. METHODS: This hypothesis was assessed by a numeric musculoskeletal model of the glenohumeral joint during active abduction. Three cases were compared: TSA with normal muscular function, TSA with supraspinatus deficiency, and TSA with supraspinatus deficiency and downward inclination of the glenoid. RESULTS: Supraspinatus deficiency increased humeral migration and eccentric loading. A downward inclination of the glenoid partly balanced the loss of stability, but this potential advantage was counterbalanced by an important stress increase within the glenoid cement. The additional subchondral bone reaming required to incline the glenoid component indeed reduced the bone support, increasing cement deformation and stress. CONCLUSION: Glenoid inclination should not be obtained at the expense of subchondral bone support.

Importance of the subscapularis muscle after total shoulder arthroplasty.

BACKGROUND: The rotator cuff muscles are the main stabilizer of the glenohumeral joint. After total shoulder arthroplasty using anterior approaches, a dysfunction of the subscapularis muscle has been reported. In the present paper we tested the hypothesis that a deficient subscapularis following total shoulder arthroplasty can induce joint instability. METHODS: To test this hypothesis we have developed an EMG-driven musculoskeletal model of the glenohumeral joint. The model was based on an algorithm that minimizes the difference between measured and predicted muscular activities, while satisfying the mechanical equilibrium of the glenohumeral joint. A movement of abduction in the scapular plane was simulated. We compared a normal and deficient subscapularis. Muscle forces, joint force, contact pattern and humeral head translation were evaluated. FINDINGS: To satisfy the mechanical equilibrium, a deficient subscapularis induced a decrease of the force of the infraspinatus muscle. This force decrease was balanced by an increase of the supraspinatus and middle deltoid. As a consequence, the deficient subscapularis induced an upward migration of the humeral head, an eccentric contact pattern and higher stress within the cement. INTERPRETATION: These results confirm the importance of the suscapularis for the long-term stability of total shoulder arthroplasty.

Die Behandlung von Acetabulumfrakturen bei geriatrischen Patienten mittels modifizierter Kabelcerclage und primärer Hüfttotalprothese. Erste Ergebnisse [Treatment of acetabular fractures in the elderly with primary total hip arthroplasty and modified cerclage. Early results]

This prospective study addresses early results of the treatment of acute acetabular fractures in elderly patients by total hip arthroplasty and cerclage wiring.Fifteen patients with an average age of 81 years were treated at our institution between February 1998 and December 2000. There were two transverse fractures, eight T-shaped fractures, two transverse fractures with associated posterior wall fracture, two posterior column fractures with associated posterior wall fracture, and one fracture of both columns. Treatment consisted of cerclage wiring of the fracture and primary non-cemented total hip replacement.All of the patients were followed for a mean of 36 months. Although there was one patient with three hip dislocations during the first 10 months after the operation, we found an excellent or good result for the entire group. During this relatively short follow-up period, we have not found a radiological loss of fracture reduction of more than 1 mm or a cup migration of more than 3.2 mm. All of the fractures healed and no loosening of the implant was evident.Primary total hip arthroplasty combined with internal fixation is a valid treatment option for acetabular fractures in the elderly. Preliminary results are convincing, but a bigger patient population and a longer follow-up time are necessary before we are able to draw final conclusions.

Identification and characterization of novel classes of macrophage migration inhibitory factor (MIF) inhibitors with distinct mechanisms of action.

Macrophage migration inhibitory factor (MIF), a proinflammatory cytokine, is considered an attractive therapeutic target in multiple inflammatory and autoimmune disorders. In addition to its known biologic activities, MIF can also function as a tautomerase. Several small molecules have been reported to be effective inhibitors of MIF tautomerase activity in vitro. Herein we employed a robust activity-based assay to identify different classes of novel inhibitors of the catalytic and biological activities of MIF. Several novel chemical classes of inhibitors of the catalytic activity of MIF with IC(50) values in the range of 0.2-15.5 microm were identified and validated. The interaction site and mechanism of action of these inhibitors were defined using structure-activity studies and a battery of biochemical and biophysical methods. MIF inhibitors emerging from these studies could be divided into three categories based on their mechanism of action: 1) molecules that covalently modify the catalytic site at the N-terminal proline residue, Pro(1); 2) a novel class of catalytic site inhibitors; and finally 3) molecules that disrupt the trimeric structure of MIF. Importantly, all inhibitors demonstrated total inhibition of MIF-mediated glucocorticoid overriding and AKT phosphorylation, whereas ebselen, a trimer-disrupting inhibitor, additionally acted as a potent hyperagonist in MIF-mediated chemotactic migration. The identification of biologically active compounds with known toxicity, pharmacokinetic properties, and biological activities in vivo should accelerate the development of clinically relevant MIF inhibitors. Furthermore, the diversity of chemical structures and mechanisms of action of our inhibitors makes them ideal mechanistic probes for elucidating the structure-function relationships of MIF and to further determine the role of the oligomerization state and catalytic activity of MIF in regulating the function(s) of MIF in health and disease.

Atmospheric deposition and migration of artificial radionuclides in Alpine soils (Val Piora, Switzerland) compared to the distribution of selected major and trace elements.

Artificial radionuclides ((137)Cs, (90)Sr, Pu, and (241)Am) are present in soils because of Nuclear Weapon Tests and accidents in nuclear facilities. Their distribution in soil depth varies according to soil characteristics, their own chemical properties, and their deposition history. For this project, we studied the atmospheric deposition of (137)Cs, (90)Sr, Pu, (241)Am, (210)Pb, and stable Pb. We compared the distribution of these elements in soil profiles from different soil types from an alpine Valley (Val Piora, Switzerland) with the distribution of selected major and trace elements in the same soils. Our goals were to explain the distribution of the radioisotopes as a function of soil parameters and to identify stable elements with analogous behaviors. We found that Pu and (241)Am are relatively immobile and accumulate in the topsoil. In all soils, (90)Sr is more mobile and shows some accumulations at depth into Fe-Al rich horizons. This behavior is also observed for Cu and Zn, indicating that these elements may be used as chemical analogues for the migration of (90)Sr into the soil.

Medial migration of lag screw after gamma nailing.

Fractures of the proximal femur are common in the elderly population. Intramedullary nailing has become the standard treatment for intertrochanteric fractures although several extramedullary implants (e.g. dynamic hip screw (DHS), blade plate, locking compression plate (LCP), etc.) exist. However, despite this being a very common operation in traumatology, there are numerous associated complications. We report the rare complication of the migration of the medial lag screw into the pelvis at five and a half weeks postoperatively. The implant was removed and replaced by a total hip arthroplasty with simultaneous grafting of the acetabular defect and strapping of the greater trochanter. The evolution was favourable. We also present a review of the literature and analyze our case.

Migration of antimony from polyethylene terephthalate used in mineral water bottles.

The influence of storage time and temperature on Sb migration from PET bottles into mineral water was studied in short-term tests lasting up to 15 days and long-term studies lasting up to 220 days. Samples purchased were stored in three different coloured bottles: clear (CL), light blue (LB) and dark blue (DB). Sb migration was assayed by HG-AFS for total determination and HPLC-ICP-MS for speciation analysis. Migration studies showed that waters stored at 4 and 20 oC were not subject to Sb migration. At 40 oC there was a significant increase in Sb concentration, although the maximum limit established by the European Union (5.0 ug/L) was not exceeded, whereas at 60 oC samples were subject to considerable Sb migration after 30 days of storage. In this case, the maximum limit established by the European Union was exceeded and both Sb (V) and Sb (III) were detected.