Localisation des récepteurs pour le TGF-β dans la peau saine et dans des plaies chez le cheval

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Localisation des récepteurs pour le TGF-β dans la peau saine et dans des plaies chez le cheval

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Évaluation de l’impact de pansements biologiques humains produits par génie tissulaire sur la guérison de plaies cutanées murines

L’étude de la guérison des plaies à l’aide de substituts produits par génie tissulaire est un domaine en plein essor. Dans ces travaux, les effets de pansements biologiques produits en laboratoire à partir de cellules souches/stromales du tissu adipeux (CSTA) différenciées ou non en adipocytes ont été évalués sur des plaies cutanées in vivo. Un modèle de souris possédant un épiderme fluorescent a permis de démontrer que les plaies traitées avec les pansements biologiques guérissent plus rapidement que les plaies non traitées, et ce, de manière indépendante de la réépithélialisation. Une augmentation de la formation du tissu de granulation et une angiogenèse accrue ont également été observées dans les groupes traités. Ces résultats établissent que les substituts contenant des CSTA ou des adipocytes fonctionnels favorisent la réparation tissulaire. À terme, ces travaux pourraient mener au développement de nouvelles indications cliniques pour le traitement des ulcères cutanés.

Contribution de l'hypoxie à la cicatrisation cutanée anormale chez le cheval : méthodes physiques d'évaluation

La guérison des plaies cutanées appendiculaires chez le cheval, à la différence de celle des plaies corporelles, se complique régulièrement. Un retard de cicatrisation s’y observe et un tissu de granulation exubérant tend à s’y développer, le tout menant à une cicatrice pathologique hypertrophiée. La pathogénie exacte du tissu de granulation exubérant chez le cheval demeure inconnue à ce jour. Une hypoxie tissulaire pourrait favoriser son développement tout comme elle semble contribuer au développement de cicatrices cutanées pathologiques similaires observées chez l’Homme. L’objectif de cette étude était d’évaluer la perfusion vasculaire et la disponibilité locale en oxygène de plaies cutanées appendiculaires et corporelles en cours de cicatrisation normale et pathologique chez le cheval, à l’aide de la thermographie infrarouge et de la spectroscopie par réflectance dans le proche infrarouge. Six juments âgées de 3 à 4 ans ont été utilisées. Trois plaies cutanées ont été créées à l’aspect dorso-latéral du canon des membres thoraciques (plaies appendiculaires), et sur la paroi costale de l’un des hémithorax (plaies corporelles). Chez chaque jument, un canon a été aléatoirement bandé dans le but d’induire la formation de tissu de granulation exubérant dans les plaies s’y trouvant, tel que rapporté. La perfusion vasculaire et la disponibilité locale en oxygène ont été évaluées séquentiellement par thermographie infrarouge et spectroscopie par réflectance dans le proche infrarouge pour chaque plaie de chaque site (thorax; membre bandé; membre non bandé) au cours du processus de cicatrisation cutanée. Un modèle linéaire à doubles mesures répétées associé à une correction séquentielle de Bonferroni a révélé des différences significatives de perfusion vasculaire et de disponibilité locale en oxygène entre les plaies appendiculaires et corporelles. Ainsi la perfusion vasculaire et la disponibilité locale en oxygène étaient significativement plus élevées dans les plaies corporelles (P<0.05) et la perfusion vasculaire était significativement plus élevée dans les plaies appendiculaires non bandées que dans celles bandées (P<0.05). Nous avons récemment rapporté une plus grande occlusion de la micro-vascularisation au niveau des plaies appendiculaires chez le cheval. Nous rapportons maintenant que la perfusion vasculaire et la disponibilité locale en oxygène sont significativement inférieures dans les plaies appendiculaires, en particulier lorsqu’un tissu de granulation exubérant s’y développe. Compilés, ces résultats sous-tendent l’hypothèse que les plaies appendiculaires souffrent d’une altération de la perfusion vasculaire à l’origine possible d’une hypoxie tissulaire qui pourrait favoriser une cicatrisation cutanée anormale, telle la formation d’un tissu de granulation exubérant.

Contribution de l’hypoxie et du facteur hif1a à la guérison cutanée chez le cheval

Le cheval est souvent victime de plaies traumatiques, dont la guérison est fréquemment problématique, et ce, principalement quand la plaie survient sur le membre. Il est courant de voir chez le cheval le développement d’un tissu de granulation exubérant ou « bouton de chair », qui mène à une cicatrisation excessive due à la surproduction de tissu fibreux. Ce tissu cicatriciel, non épithélialisé, est caractérisé par une occlusion au niveau de la microcirculation due à l’hypertrophie des cellules endothéliales, qui laisse supposer la présence d’hypoxie tissulaire. Une hypoxie relative a effectivement été mesurée par spectroscopie dans le proche infrarouge au niveau des plaies appendiculaires prédisposées au développement de tissu de granulation exubérant, par rapport aux plaies corporelles. De plus, une étude thermographique a révélé un patron spatial similaire de la perfusion. Au niveau moléculaire, la littérature rapporte que le facteur de transcription «hypoxia inducible factor» (HIF) est à l’origine de plusieurs changements dans les niveaux d’expression de divers gènes régulés par l’hypoxie. L’objectif du présent projet de recherche était de définir la contribution de l’hypoxie à la guérison cutanée chez le cheval. Le premier volet (in vivo) du projet visait à mesurer l’expression protéique temporelle du HIF1A dans des échantillons tissulaires en provenance de plaies cutanées guérissant normalement et d’autres développant une cicatrisation excessive, selon divers sites anatomiques (tronc, membre). Les résultats obtenus suggèrent que la mesure de HIF1A, dans les échantillons pluricellulaires de cette étude, reflète l’épithélialisation de la plaie plutôt que les niveaux d’oxygène tissulaire. En effet, le HIF1A semble réguler l’homéostasie et la prolifération des kératinocytes. Le second volet (in vitro), consistait en la mise en culture de fibroblastes dermiques équins provenant du tronc ou du membre, en condition de normoxie ou d’hypoxie (à 1% d’O2 ou à l’aide d’un mimétique, le CoCl2) afin d’en étudier le comportement (capacités de prolifération et de synthèse protéique). Les résultats obtenus soutiennent une contribution de l’hypoxie à la cicatrisation extensive chez le cheval puisque l’hypoxie favorise la prolifération des fibroblastes en plus d’encourager la synthèse de collagène de type 1 et de diminuer la synthèse de la métalloprotéinase de type 2. Les changements observés semblent dépendre de facteurs extrinsèques (environnementaux) car les fibroblastes dermiques se comportent de façon similaire indépendamment de la provenance anatomique. En somme, les deux volets de l’étude ont permis d’élucider une part des mécanismes sous-jacents à la formation du tissu de granulation exubérant lors de guérison cutanée chez le cheval. La poursuite des recherches dans ce domaine mènera à une meilleure compréhension de la pathologie et ainsi, permettra de développer des méthodes de traitement spécifiques à la condition.

Time course analysis of hypoxia, granulation tissue and blood vessel growth, and remodeling in healing rat cutaneous incisional primary intention wounds

Hypoxia and the development and remodeling of blood vessels and connective tissue in granulation tissue that forms in a wound gap following full-thickness skin incision in the rat were examined as a function of time. A 1.5 cm-long incisional wound was created in rat groin skin and the opposed edges sutured together. Wounds were harvested between 3 days and 16 weeks and hypoxia, percent vascular volume, cell proliferation and apoptosis, α-smooth muscle actin, vascular endothelial growth factor-A, vascular endothelial growth factor receptor-2, and transforming growth factor-β 1 expression in granulation tissue were then assessed. Hypoxia was evident between 3 and 7 days while maximal cell proliferation at 3 days (123.6 ± 22.2 cells/mm 2, p < 0.001 when compared with normal skin) preceded the peak percent vascular volume that occurred at 7 days (15.83 ± 1.10%, p < 0.001 when compared with normal skin). The peak in cell apoptosis occurred at 3 weeks (12.1 ± 1.3 cells/mm 2, p < 0.001 when compared with normal skin). Intense α-smooth muscle actin labeling in myofibroblasts was evident at 7 and 10 days. Vascular endothelial growth factor receptor-2 and vascular endothelial growth factor-A were detectable until 2 and 3 weeks, respectively, while transforming growth factor-β 1 protein was detectable in endothelial cells and myofibroblasts until 3-4 weeks and in the extracellular matrix for 16 weeks. Incisional wound granulation tissue largely developed within 3-7 days in the presence of hypoxia. Remodeling, marked by a decline in the percent vascular volume and increased cellular apoptosis, occurred largely in the absence of detectable hypoxia. The expression of vascular endothelial growth factor-A, vascular endothelial growth factor receptor-2, and transforming growth factor-β 1 is evident prior, during, and after the peak of vascular volume reflecting multiple roles for these factors during wound healing.

Process Analytical Technology Approach on Fluid Bed Granulation and Drying : Identifying Critical Relationships and Constructing the Design Space

Fluid bed granulation is a key pharmaceutical process which improves many of the powder properties for tablet compression. Dry mixing, wetting and drying phases are included in the fluid bed granulation process. Granules of high quality can be obtained by understanding and controlling the critical process parameters by timely measurements. Physical process measurements and particle size data of a fluid bed granulator that are analysed in an integrated manner are included in process analytical technologies (PAT). Recent regulatory guidelines strongly encourage the pharmaceutical industry to apply scientific and risk management approaches to the development of a product and its manufacturing process. The aim of this study was to utilise PAT tools to increase the process understanding of fluid bed granulation and drying. Inlet air humidity levels and granulation liquid feed affect powder moisture during fluid bed granulation. Moisture influences on many process, granule and tablet qualities. The approach in this thesis was to identify sources of variation that are mainly related to moisture. The aim was to determine correlations and relationships, and utilise the PAT and design space concepts for the fluid bed granulation and drying. Monitoring the material behaviour in a fluidised bed has traditionally relied on the observational ability and experience of an operator. There has been a lack of good criteria for characterising material behaviour during spraying and drying phases, even though the entire performance of a process and end product quality are dependent on it. The granules were produced in an instrumented bench-scale Glatt WSG5 fluid bed granulator. The effect of inlet air humidity and granulation liquid feed on the temperature measurements at different locations of a fluid bed granulator system were determined. This revealed dynamic changes in the measurements and enabled finding the most optimal sites for process control. The moisture originating from the granulation liquid and inlet air affected the temperature of the mass and pressure difference over granules. Moreover, the effects of inlet air humidity and granulation liquid feed rate on granule size were evaluated and compensatory techniques used to optimize particle size. Various end-point indication techniques of drying were compared. The ∆T method, which is based on thermodynamic principles, eliminated the effects of humidity variations and resulted in the most precise estimation of the drying end-point. The influence of fluidisation behaviour on drying end-point detection was determined. The feasibility of the ∆T method and thus the similarities of end-point moisture contents were found to be dependent on the variation in fluidisation between manufacturing batches. A novel parameter that describes behaviour of material in a fluid bed was developed. Flow rate of the process air and turbine fan speed were used to calculate this parameter and it was compared to the fluidisation behaviour and the particle size results. The design space process trajectories for smooth fluidisation based on the fluidisation parameters were determined. With this design space it is possible to avoid excessive fluidisation and improper fluidisation and bed collapse. Furthermore, various process phenomena and failure modes were observed with the in-line particle size analyser. Both rapid increase and a decrease in granule size could be monitored in a timely manner. The fluidisation parameter and the pressure difference over filters were also discovered to express particle size when the granules had been formed. The various physical parameters evaluated in this thesis give valuable information of fluid bed process performance and increase the process understanding.

Optimisation of granola breakfast cereal manufacturing process by wet granulation and pneumatic conveying

This study has considered the optimisation of granola breakfast cereal manufacturing processes by wet granulation and pneumatic conveying. Granola is an aggregated food product used as a breakfast cereal and in cereal bars. Processing of granola involves mixing the dry ingredients (typically oats, nuts, etc.) followed by the addition of a binder which can contain honey, water and/or oil. In this work, the design and operation of two parallel wet granulation processes to produce aggregate granola products were incorporated: a) a high shear mixing granulation process followed by drying/toasting in an oven. b) a continuous fluidised bed followed by drying/toasting in an oven. In high shear granulation the influence of process parameters on key granule aggregate quality attributes such as granule size distribution and textural properties of granola were investigated. The experimental results show that the impeller rotational speed is the single most important process parameter which influences granola physical and textural properties. After that binder addition rate and wet massing time also show significant impacts on granule properties. Increasing the impeller speed and wet massing time increases the median granule size while also presenting a positive correlation with density. The combination of high impeller speed and low binder addition rate resulted in granules with the highest levels of hardness and crispness. In the fluidised bed granulation process the effect of nozzle air pressure and binder spray rate on key aggregate quality attributes were studied. The experimental results show that a decrease in nozzle air pressure leads to larger in mean granule size. The combination of lowest nozzle air pressure and lowest binder spray rate results in granules with the highest levels of hardness and crispness. Overall, the high shear granulation process led to larger, denser, less porous and stronger (less likely to break) aggregates than the fluidised bed process. The study also examined the particle breakage of granola during pneumatic conveying produced by both the high shear granulation and the fluidised bed granulation process. Products were pneumatically conveyed in a purpose built conveying rig designed to mimic product conveying and packaging. Three different conveying rig configurations were employed; a straight pipe, a rig consisting two 45° bends and one with 90° bend. Particle breakage increases with applied pressure drop, and a 90° bend pipe results in more attrition for all conveying velocities relative to other pipe geometry. Additionally for the granules produced in the high shear granulator; those produced at the highest impeller speed, while being the largest also have the lowest levels of proportional breakage while smaller granules produced at the lowest impeller speed have the highest levels of breakage. This effect clearly shows the importance of shear history (during granule production) on breakage during subsequent processing. In terms of the fluidised bed granulation, there was no single operating parameter that was deemed to have a significant effect on breakage during subsequent conveying. Finally, a simple power law breakage model based on process input parameters was developed for both manufacturing processes. It was found suitable for predicting the breakage of granola breakfast cereal at various applied air velocities using a number of pipe configurations, taking into account shear histories.

Influence of process parameters on fluidised hot-melt granulation and tablet pressing of pharmaceutical powders

This study investigates the influence of process parameters on the fluidised hot melt granulation of lactose and PEG 6000, and the subsequent tablet pressing of the granules. Granulation experiments were performed to assess the effect of granulation time and binder content of the feed on the resulting granule properties such as mass mean granule size, size distribution, granule fracture stress, and granule porosity. These data were correlated using the granule growth regime model. It was found that the dominant granule growth mechanisms in this melt granulation system were nucleation followed by steady growth (PEG 10–20% w/w). However, with binder contents greater than 20% w/w, the granulation mechanism moved to the “over-wet massing” regime in which discrete granule formation could not be obtained. The granules produced in the melt fluidised bed process were subsequently pressed into tablets using an industrial tablet press. The physical properties of the tablets: fracture stress, disintegration time and friability were assessed using industry standards. These analyses indicated that particle size and binder content of the initial granules influenced the mechanical properties of the tablets. It was noted that a decrease in initial granule size resulted in an increase in the fracture stress of the tablets formed.

Co-melt fluidised bed granulation of pharmaceutical powders: Improvements in drug bioavailability

This study investigates the use of co-melt fluidised bed granulation for the agglomeration of model pharmaceutical powders, namely, lactose mono-hydrate, PEG 10000, poly-vinyl pyrolidone and ibuprofen as a model drug. Granulation within the co-melt system was found to follow a nucleationâ??steady growthâ??coating regime profile. Using high molecular weight PEG binder, the granulation mechanism and thus the extent of granulation was found to be significantly influenced by binder viscosity. The compression properties of the granulate within the hot fluidised bed were correlated using a novel high temperature experimental procedure. It was found that the fracture stress and fractural modulus of the materials under hot processing conditions were orders of magnitude lower than those measured under ambient conditions. A range of particle velocities within the granulator were considered based on theoretical models. After an initial period of nucleation, the Stokes deformation number analysis indicated that only velocities within the high shear region of the fluidised bed were sufficient to promote significant granule deformation and therefore, coalescence. The data also indicated that larger granules de-fluidised preventing agglomeration by coalescence. Furthermore, experimental data indicated that dissipation of the viscous molten binder to the surface was the most important factor in the latter stages of the granulation process. From a pharmaceutical perspective the inclusion of the model drug, ibuprofen, combined with PVP in the co-melt process proved to be highly significant. It was found that using DSC analysis on the formulations that the decrease in the heat of fusion associated with the melting of ibuprofen within the FHMG systems may be attributed to interaction between PVP and ibuprofen through inter-molecular hydrogen bonding. This interaction decreases the crystallinity of ibuprofen and facilitates solubilisation and bioavailability within the solid matrix.